diff --git a/info.yaml b/info.yaml
index 2e71847..01ef25a 100644
--- a/info.yaml
+++ b/info.yaml
@@ -26,7 +26,7 @@
   clock_hz:     1000000       # Clock frequency in Hz (if required) we are expecting max clock frequency to be ~6khz. Provided on input 0.
   picture:      ""      # relative path to a picture in your repository
   inputs:               # a description of what the inputs do
-    - clock
+    - clk
     - clock_selector_bit0
     - clock_selector_bit1
     - clock_A_division_factor_bit0
diff --git a/openlane/tiny_user_project/config.json b/openlane/tiny_user_project/config.json
index 9b7dcf5..43a2604 100644
--- a/openlane/tiny_user_project/config.json
+++ b/openlane/tiny_user_project/config.json
@@ -8,8 +8,8 @@
         "dir::../../verilog/rtl/tiny_user_project.v"
     ],
     "CLOCK_TREE_SYNTH": 1,
-    "CLOCK_PORT": "clk",
-    "CLOCK_NET": "clk",
+    "CLOCK_PORT": "io_in[0]",
+    "CLOCK_NET": "io_in[0]",
     "FP_SIZING": "absolute",
     "DIE_AREA": "0 0 120 150",
     "FP_PIN_ORDER_CFG": "dir::pin_order.cfg",
diff --git a/verilog/rtl/user_module.v b/verilog/rtl/user_module.v
index f70bd6d..c6e02c9 100644
--- a/verilog/rtl/user_module.v
+++ b/verilog/rtl/user_module.v
@@ -1,7 +1,6 @@
 
 module user_module(
-        input   wire    clk,
-        input   wire    [25:0] io_in,
+        input   wire    [26:0] io_in,
         output  wire    out
     );
     
@@ -16,14 +15,16 @@
     wire [5:0]  clock_div_factor_c;
     wire [5:0]  clock_div_factor_d;
     wire [1:0]  clock_select;
+    wire        clk;
     wire        clock_syn;
     
-    assign  clock_select = io_in[1:0];
+    assign  clk = io_in[0]
+    assign  clock_select = io_in[2:1];
     assign  clock_syn = div_clock[clock_select];
-    assign  clock_div_factor_a = io_in[7:2];
-    assign  clock_div_factor_b = io_in[13:8];
-    assign  clock_div_factor_c = io_in[19:14];
-    assign  clock_div_factor_d = io_in[25:20];
+    assign  clock_div_factor_a = io_in[8:3];
+    assign  clock_div_factor_b = io_in[14:9];
+    assign  clock_div_factor_c = io_in[20:15];
+    assign  clock_div_factor_d = io_in[26:21];
     
     
     always @ (posedge clk) begin