verilog/dv/user_sram_exec/user_sram_exec.c

/*
 * SPDX-FileCopyrightText: 2020 Efabless Corporation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 * SPDX-License-Identifier: Apache-2.0
 */


#define SC_SIM_OUTPORT (0xf0000000)
#define uint32_t  long
#define uint16_t  int

#define reg_mprj_globl_reg0  (*(volatile uint32_t*)0x10020000) // Chip ID
#define reg_mprj_globl_reg1  (*(volatile uint32_t*)0x10020004) // Global Config-0
#define reg_mprj_globl_reg2  (*(volatile uint32_t*)0x10020008) // Global Config-1
#define reg_mprj_globl_reg3  (*(volatile uint32_t*)0x1002000C) // Global Interrupt Mask
#define reg_mprj_globl_reg4  (*(volatile uint32_t*)0x10020010) // Global Interrupt
#define reg_mprj_globl_reg5  (*(volatile uint32_t*)0x10020014) // Multi functional sel
#define reg_mprj_globl_soft0  (*(volatile uint32_t*)0x10020018) // Sof Register-0
#define reg_mprj_globl_soft1  (*(volatile uint32_t*)0x1002001C) // Sof Register-1
#define reg_mprj_globl_soft2  (*(volatile uint32_t*)0x10020020) // Sof Register-2
#define reg_mprj_globl_soft3  (*(volatile uint32_t*)0x10020024) // Sof Register-3
#define reg_mprj_globl_soft4 (*(volatile uint32_t*)0x10020028) // Sof Register-4
#define reg_mprj_globl_soft5 (*(volatile uint32_t*)0x1002002C) // Sof Register-5
// -------------------------------------------------------------------------
// Test copying code into SRAM and running it from there.
// -------------------------------------------------------------------------

void test_function()
{
    reg_mprj_globl_soft2  = 0x33445566;  // Sig-2
    reg_mprj_globl_soft3  = 0x44556677;  // Sig-3

    return;
}

void main()
{
    uint16_t func[&main - &test_function];
    uint16_t *src_ptr;
    uint16_t *dst_ptr;


    src_ptr = &test_function;
    dst_ptr = func;

    reg_mprj_globl_soft0  = 0x11223344;  // Sig-0
    while (src_ptr < &main) {
	*(dst_ptr++) = *(src_ptr++);
    }

    // Call the routine in SRAM
    reg_mprj_globl_soft1  = 0x22334455;  // Sig-1
    
    ((void(*)())func)();

    reg_mprj_globl_soft4 = 0x55667788; // Sig-4
    reg_mprj_globl_soft5 = 0x66778899; // Sig-5

    // Signal end of test
}