diff --git a/openlane/pinmux/pin_order.cfg b/openlane/pinmux/pin_order.cfg
index 5d8d756..2ff62e6 100644
--- a/openlane/pinmux/pin_order.cfg
+++ b/openlane/pinmux/pin_order.cfg
@@ -8,7 +8,8 @@
 cpu_intf_rst_n
 qspim_rst_n
 sspim_rst_n
-uart_rst_n
+uart_rst_n\[1\]
+uart_rst_n\[0\]
 i2cm_rst_n
 usb_rst_n 
 cfg_riscv_ctrl\[15\]
@@ -35,8 +36,10 @@
 usb_oen 
 usb_dp_i 
 usb_dn_i 
-uart_txd 
-uart_rxd
+uart_txd\[1\] 
+uart_rxd\[1\]
+uart_txd\[0\] 
+uart_rxd\[0\]
 i2cm_clk_o 
 i2cm_clk_i 
 i2cm_clk_oen 
@@ -44,7 +47,10 @@
 i2cm_data_o 
 i2cm_data_i 
 spim_sck 
-spim_ss 
+spim_ssn\[3\] 
+spim_ssn\[2\] 
+spim_ssn\[1\] 
+spim_ssn\[0\] 
 spim_miso
 spim_mosi
 pulse1m_mclk
diff --git a/openlane/uart_i2cm_usb_spi_top/base.sdc b/openlane/uart_i2cm_usb_spi_top/base.sdc
index 36725cd..735b5fb 100644
--- a/openlane/uart_i2cm_usb_spi_top/base.sdc
+++ b/openlane/uart_i2cm_usb_spi_top/base.sdc
@@ -7,7 +7,8 @@
 # Timing Constraints
 ###############################################################################
 create_clock -name app_clk -period 10.0000 [get_ports {app_clk}]
-create_clock -name line_clk -period 100.0000 [get_pins {u_uart_core.u_lineclk_buf.u_mux/X}]
+create_clock -name uart0_baud_clk -period 100.0000 [get_pins {u_uart0_core.u_lineclk_buf.u_mux/X}]
+create_clock -name uart1_baud_clk -period 100.0000 [get_pins {u_uart1_core.u_lineclk_buf.u_mux/X}]
 create_clock -name usb_clk -period 100.0000 [get_ports {usb_clk}]
 
 set_clock_transition 0.1500 [all_clocks]
@@ -19,7 +20,8 @@
 set_clock_groups -name async_clock -asynchronous \
  -group [get_clocks {app_clk}]\
  -group [get_clocks {usb_clk}]\
- -group [get_clocks {line_clk}] -comment {Async Clock group}
+ -group [get_clocks {uart0_baud_clk}]\
+ -group [get_clocks {uart1_baud_clk}] -comment {Async Clock group}
 
 ### ClkSkew Adjust
 set_case_analysis 0 [get_ports {cfg_cska_uart[0]}]
diff --git a/openlane/uart_i2cm_usb_spi_top/config.tcl b/openlane/uart_i2cm_usb_spi_top/config.tcl
index 48ac117..2627452 100644
--- a/openlane/uart_i2cm_usb_spi_top/config.tcl
+++ b/openlane/uart_i2cm_usb_spi_top/config.tcl
@@ -90,7 +90,7 @@
 
 set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
 set ::env(FP_SIZING) "absolute"
-set ::env(DIE_AREA) [list 0.0 0.0 500.0 700.0]
+set ::env(DIE_AREA) [list 0.0 0.0 510.0 725.0]
 
 
 
diff --git a/openlane/uart_i2cm_usb_spi_top/pin_order.cfg b/openlane/uart_i2cm_usb_spi_top/pin_order.cfg
index 3fc5625..aba1684 100644
--- a/openlane/uart_i2cm_usb_spi_top/pin_order.cfg
+++ b/openlane/uart_i2cm_usb_spi_top/pin_order.cfg
@@ -12,6 +12,7 @@
 
 reg_cs                 0100 0  2
 reg_wr                 
+reg_addr\[8\]          
 reg_addr\[7\]          
 reg_addr\[6\]          
 reg_addr\[5\]          
@@ -94,7 +95,8 @@
 
 #S
 usb_clk
-uart_rstn    
+uart_rstn\[1]   
+uart_rstn\[0]   
 i2c_rstn 
 usb_rstn 
 
@@ -106,8 +108,10 @@
 sda_pad_i
 sda_pad_o
 sda_padoen_o
-uart_rxd
-uart_txd
+uart_rxd\[0\]
+uart_txd\[0\]
+uart_rxd\[1\]
+uart_txd\[1\]
 usb_in_dp
 usb_in_dn
 usb_out_dp
@@ -121,7 +125,10 @@
 sspim_sck
 sspim_si
 sspim_so
-sspim_ssn
+sspim_ssn\[3\]
+sspim_ssn\[2\]
+sspim_ssn\[1\]
+sspim_ssn\[0\]
 
 
          
diff --git a/openlane/wb_interconnect/config.tcl b/openlane/wb_interconnect/config.tcl
index 882273d..2b03cd9 100755
--- a/openlane/wb_interconnect/config.tcl
+++ b/openlane/wb_interconnect/config.tcl
@@ -70,7 +70,7 @@
 set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
 
 set ::env(FP_SIZING) absolute
-set ::env(DIE_AREA) "0 0 300 1800"
+set ::env(DIE_AREA) "0 0 300 1725"
 
 
 # If you're going to use multiple power domains, then keep this disabled.
diff --git a/openlane/wb_interconnect/pin_order.cfg b/openlane/wb_interconnect/pin_order.cfg
index 565b205..1534993 100644
--- a/openlane/wb_interconnect/pin_order.cfg
+++ b/openlane/wb_interconnect/pin_order.cfg
@@ -621,6 +621,7 @@
 
 s1_wbd_stb_o          0800 0 2
 s1_wbd_we_o         
+s1_wbd_adr_o\[8\]   
 s1_wbd_adr_o\[7\]   
 s1_wbd_adr_o\[6\]   
 s1_wbd_adr_o\[5\]   
diff --git a/signoff/pinmux/final_summary_report.csv b/signoff/pinmux/final_summary_report.csv
index 95dfe93..c9a9159 100644
--- a/signoff/pinmux/final_summary_report.csv
+++ b/signoff/pinmux/final_summary_report.csv
@@ -1,2 +1,2 @@
 ,design,design_name,config,flow_status,total_runtime,routed_runtime,(Cell/mm^2)/Core_Util,DIEAREA_mm^2,CellPer_mm^2,OpenDP_Util,Peak_Memory_Usage_MB,cell_count,tritonRoute_violations,Short_violations,MetSpc_violations,OffGrid_violations,MinHole_violations,Other_violations,Magic_violations,antenna_violations,lvs_total_errors,cvc_total_errors,klayout_violations,wire_length,vias,wns,pl_wns,optimized_wns,fastroute_wns,spef_wns,tns,pl_tns,optimized_tns,fastroute_tns,spef_tns,HPWL,routing_layer1_pct,routing_layer2_pct,routing_layer3_pct,routing_layer4_pct,routing_layer5_pct,routing_layer6_pct,wires_count,wire_bits,public_wires_count,public_wire_bits,memories_count,memory_bits,processes_count,cells_pre_abc,AND,DFF,NAND,NOR,OR,XOR,XNOR,MUX,inputs,outputs,level,EndCaps,TapCells,Diodes,Total_Physical_Cells,suggested_clock_frequency,suggested_clock_period,CLOCK_PERIOD,SYNTH_STRATEGY,SYNTH_MAX_FANOUT,FP_CORE_UTIL,FP_ASPECT_RATIO,FP_PDN_VPITCH,FP_PDN_HPITCH,PL_TARGET_DENSITY,GLB_RT_ADJUSTMENT,STD_CELL_LIBRARY,CELL_PAD,DIODE_INSERTION_STRATEGY
-0,/project/openlane/pinmux,pinmux,pinmux,flow completed,0h10m34s0ms,0h7m12s0ms,49462.62626262626,0.2475,24731.31313131313,29.42,907.76,6121,0,0,0,0,0,0,0,-1,0,-1,-1,479668,61682,-9.8,-17.24,-1,0.0,0.0,-11351.48,-19667.29,-1,0.0,0.0,379249279.0,0.0,61.45,48.02,33.52,24.16,-1,4043,9535,808,6300,0,0,0,4590,151,83,49,96,1013,154,18,283,1206,1171,12,314,3259,0,3573,100.0,10.0,10,AREA 0,4,50,1,100,100,0.3,0.3,sky130_fd_sc_hd,4,4
+0,/project/openlane/pinmux,pinmux,pinmux,flow completed,0h12m51s0ms,0h8m26s0ms,49503.030303030304,0.2475,24751.515151515152,29.48,976.22,6126,0,0,0,0,0,0,0,-1,0,-1,-1,487300,61595,-9.79,-17.24,-1,0.0,0.0,-11345.75,-19604.93,-1,0.0,0.0,382894019.0,0.0,60.43,49.52,35.53,23.93,-1,4054,9557,810,6313,0,0,0,4601,152,83,49,97,1014,154,18,287,1210,1172,11,314,3259,0,3573,100.0,10.0,10,AREA 0,4,50,1,100,100,0.3,0.3,sky130_fd_sc_hd,4,4
diff --git a/signoff/uart_i2cm_usb_spi_top/final_summary_report.csv b/signoff/uart_i2cm_usb_spi_top/final_summary_report.csv
index 8f28170..012e174 100644
--- a/signoff/uart_i2cm_usb_spi_top/final_summary_report.csv
+++ b/signoff/uart_i2cm_usb_spi_top/final_summary_report.csv
@@ -1,2 +1,2 @@
 ,design,design_name,config,flow_status,total_runtime,routed_runtime,(Cell/mm^2)/Core_Util,DIEAREA_mm^2,CellPer_mm^2,OpenDP_Util,Peak_Memory_Usage_MB,cell_count,tritonRoute_violations,Short_violations,MetSpc_violations,OffGrid_violations,MinHole_violations,Other_violations,Magic_violations,antenna_violations,lvs_total_errors,cvc_total_errors,klayout_violations,wire_length,vias,wns,pl_wns,optimized_wns,fastroute_wns,spef_wns,tns,pl_tns,optimized_tns,fastroute_tns,spef_tns,HPWL,routing_layer1_pct,routing_layer2_pct,routing_layer3_pct,routing_layer4_pct,routing_layer5_pct,routing_layer6_pct,wires_count,wire_bits,public_wires_count,public_wire_bits,memories_count,memory_bits,processes_count,cells_pre_abc,AND,DFF,NAND,NOR,OR,XOR,XNOR,MUX,inputs,outputs,level,EndCaps,TapCells,Diodes,Total_Physical_Cells,suggested_clock_frequency,suggested_clock_period,CLOCK_PERIOD,SYNTH_STRATEGY,SYNTH_MAX_FANOUT,FP_CORE_UTIL,FP_ASPECT_RATIO,FP_PDN_VPITCH,FP_PDN_HPITCH,PL_TARGET_DENSITY,GLB_RT_ADJUSTMENT,STD_CELL_LIBRARY,CELL_PAD,DIODE_INSERTION_STRATEGY
-0,/project/openlane/uart_i2cm_usb_spi_top,uart_i2c_usb_spi_top,uart_i2cm_usb_spi_top,flow completed,0h21m20s0ms,0h16m25s0ms,69285.71428571429,0.35,34642.857142857145,39.21,1388.79,12125,0,0,0,0,0,0,0,-1,0,-1,-1,594439,103896,0.0,0.0,0.0,0.0,-0.02,0.0,0.0,0.0,0.0,-0.02,369917177.0,0.0,51.11,51.47,19.26,22.98,-1,8702,13067,1552,5853,0,0,0,9824,392,189,256,272,2200,354,88,807,2409,2348,18,498,4643,0,5141,99.8003992015968,10.02,10,AREA 0,4,50,1,100,100,0.45,0.3,sky130_fd_sc_hd,4,4
+0,/project/openlane/uart_i2cm_usb_spi_top,uart_i2c_usb_spi_top,uart_i2cm_usb_spi_top,flow completed,0h22m48s0ms,0h16m17s0ms,78025.69303583504,0.36975,39012.84651791752,44.35,1525.37,14425,0,0,0,0,0,0,0,-1,0,-1,-1,702950,122604,0.0,-0.0,0.0,0.0,0.0,0.0,-0.0,0.0,0.0,0.0,442593619.0,0.0,56.86,57.94,21.95,25.41,-1,10340,15543,1940,7056,0,0,0,11580,425,250,279,358,2406,481,113,1133,2832,2749,18,516,4940,0,5456,100.0,10.0,10,AREA 0,4,50,1,100,100,0.45,0.3,sky130_fd_sc_hd,4,4
diff --git a/signoff/user_project_wrapper/final_summary_report.csv b/signoff/user_project_wrapper/final_summary_report.csv
index 95e3399..2b00543 100644
--- a/signoff/user_project_wrapper/final_summary_report.csv
+++ b/signoff/user_project_wrapper/final_summary_report.csv
@@ -1,2 +1,2 @@
 ,design,design_name,config,flow_status,total_runtime,routed_runtime,(Cell/mm^2)/Core_Util,DIEAREA_mm^2,CellPer_mm^2,OpenDP_Util,Peak_Memory_Usage_MB,cell_count,tritonRoute_violations,Short_violations,MetSpc_violations,OffGrid_violations,MinHole_violations,Other_violations,Magic_violations,antenna_violations,lvs_total_errors,cvc_total_errors,klayout_violations,wire_length,vias,wns,pl_wns,optimized_wns,fastroute_wns,spef_wns,tns,pl_tns,optimized_tns,fastroute_tns,spef_tns,HPWL,routing_layer1_pct,routing_layer2_pct,routing_layer3_pct,routing_layer4_pct,routing_layer5_pct,routing_layer6_pct,wires_count,wire_bits,public_wires_count,public_wire_bits,memories_count,memory_bits,processes_count,cells_pre_abc,AND,DFF,NAND,NOR,OR,XOR,XNOR,MUX,inputs,outputs,level,EndCaps,TapCells,Diodes,Total_Physical_Cells,suggested_clock_frequency,suggested_clock_period,CLOCK_PERIOD,SYNTH_STRATEGY,SYNTH_MAX_FANOUT,FP_CORE_UTIL,FP_ASPECT_RATIO,FP_PDN_VPITCH,FP_PDN_HPITCH,PL_TARGET_DENSITY,GLB_RT_ADJUSTMENT,STD_CELL_LIBRARY,CELL_PAD,DIODE_INSERTION_STRATEGY
-0,/project/openlane/user_project_wrapper,user_project_wrapper,user_project_wrapper,flow completed,0h49m29s0ms,0h4m19s0ms,-2.0,-1,-1,-1,569.15,12,0,0,0,0,0,0,-1,0,0,-1,-1,1433179,10348,0.0,-1,-1,0.0,0.0,0.0,-1,-1,0.0,0.0,-1,0.0,5.53,6.45,1.29,1.91,0.0,349,3680,349,3680,0,0,0,12,0,0,0,0,0,0,0,0,-1,-1,-1,0,0,0,0,100.0,10.0,10,AREA 0,5,50,1,80,90,0.55,0.3,sky130_fd_sc_hd,4,0
+0,/project/openlane/user_project_wrapper,user_project_wrapper,user_project_wrapper,flow completed,0h49m16s0ms,0h4m24s0ms,-2.0,-1,-1,-1,581.95,12,0,0,0,0,0,0,-1,0,0,-1,-1,1440070,10466,0.0,-1,-1,0.0,0.0,0.0,-1,-1,0.0,0.0,-1,0.0,5.5,6.38,1.41,2.16,0.0,349,3687,349,3687,0,0,0,12,0,0,0,0,0,0,0,0,-1,-1,-1,0,0,0,0,100.0,10.0,10,AREA 0,5,50,1,80,90,0.55,0.3,sky130_fd_sc_hd,4,0
diff --git a/signoff/wb_interconnect/final_summary_report.csv b/signoff/wb_interconnect/final_summary_report.csv
index 3be20a9..2ff461b 100644
--- a/signoff/wb_interconnect/final_summary_report.csv
+++ b/signoff/wb_interconnect/final_summary_report.csv
@@ -1,2 +1,2 @@
 ,design,design_name,config,flow_status,total_runtime,routed_runtime,(Cell/mm^2)/Core_Util,DIEAREA_mm^2,CellPer_mm^2,OpenDP_Util,Peak_Memory_Usage_MB,cell_count,tritonRoute_violations,Short_violations,MetSpc_violations,OffGrid_violations,MinHole_violations,Other_violations,Magic_violations,antenna_violations,lvs_total_errors,cvc_total_errors,klayout_violations,wire_length,vias,wns,pl_wns,optimized_wns,fastroute_wns,spef_wns,tns,pl_tns,optimized_tns,fastroute_tns,spef_tns,HPWL,routing_layer1_pct,routing_layer2_pct,routing_layer3_pct,routing_layer4_pct,routing_layer5_pct,routing_layer6_pct,wires_count,wire_bits,public_wires_count,public_wire_bits,memories_count,memory_bits,processes_count,cells_pre_abc,AND,DFF,NAND,NOR,OR,XOR,XNOR,MUX,inputs,outputs,level,EndCaps,TapCells,Diodes,Total_Physical_Cells,suggested_clock_frequency,suggested_clock_period,CLOCK_PERIOD,SYNTH_STRATEGY,SYNTH_MAX_FANOUT,FP_CORE_UTIL,FP_ASPECT_RATIO,FP_PDN_VPITCH,FP_PDN_HPITCH,PL_TARGET_DENSITY,GLB_RT_ADJUSTMENT,STD_CELL_LIBRARY,CELL_PAD,DIODE_INSERTION_STRATEGY
-0,/project/openlane/wb_interconnect,wb_interconnect,wb_interconnect,flow completed,0h19m48s0ms,0h14m39s0ms,40348.14814814815,0.54,20174.074074074077,18.13,1318.06,10894,0,0,0,0,0,0,0,-1,0,-1,-1,949047,90644,-1.53,-2.29,-1,-2.25,-2.33,-106.67,-188.2,-1,-259.9,-259.66,793691221.0,0.0,20.02,51.61,1.99,21.92,-1,3846,12864,637,9652,0,0,0,5341,269,12,304,131,626,98,13,1402,1753,1688,16,1306,7205,0,8511,81.10300081103001,12.33,10,AREA 0,2,50,1,153.6,153.18,0.2,0,sky130_fd_sc_hd,8,4
+0,/project/openlane/wb_interconnect,wb_interconnect,wb_interconnect,flow completed,0h48m7s0ms,0h42m42s0ms,42171.98067632851,0.5175,21085.990338164254,18.97,1315.96,10912,0,0,0,0,0,0,0,-1,0,-1,-1,944198,91561,-1.37,-2.18,-1,-2.16,-2.45,-101.7,-183.14,-1,-234.87,-227.37,766024314.0,0.0,22.5,51.36,3.09,22.47,-1,3853,12872,637,9653,0,0,0,5356,272,12,304,131,628,98,13,1407,1758,1694,17,1252,6908,0,8160,80.32128514056225,12.45,10,AREA 0,2,50,1,153.6,153.18,0.2,0,sky130_fd_sc_hd,8,4
diff --git a/sta/sdc/caravel.sdc b/sta/sdc/caravel.sdc
index 85ec73f..494f7e6 100644
--- a/sta/sdc/caravel.sdc
+++ b/sta/sdc/caravel.sdc
@@ -19,7 +19,8 @@
 create_clock -name cpu_clk     -period 20.0000  [get_pins {mprj/u_wb_host/cpu_clk}]
 create_clock -name rtc_clk     -period 50.0000  [get_pins {mprj/u_wb_host/rtc_clk}]
 create_clock -name usb_clk     -period 20.0000  [get_pins {mprj/u_wb_host/usb_clk}]
-create_clock -name uarts_clk   -period 100.0000 [get_pins {mprj/u_uart_i2c_usb_spi/u_uart_core.u_lineclk_buf.u_mux/X}]
+create_clock -name uarts0_clk  -period 100.0000 [get_pins {mprj/u_uart_i2c_usb_spi/u_uart0_core.u_lineclk_buf.u_mux/X}]
+create_clock -name uarts1_clk  -period 100.0000 [get_pins {mprj/u_uart_i2c_usb_spi/u_uart0_core.u_lineclk_buf.u_mux/X}]
 create_clock -name uartm_clk   -period 100.0000 [get_pins {mprj/u_wb_host/u_uart2wb.u_core.u_uart_clk.u_mux/X}]
 
 
@@ -75,7 +76,8 @@
  -group [get_clocks {cpu_ref_clk}]\
  -group [get_clocks {rtc_clk}]\
  -group [get_clocks {usb_clk}]\
- -group [get_clocks {uarts_clk}]\
+ -group [get_clocks {uarts0_clk}]\
+ -group [get_clocks {uarts1_clk}]\
  -group [get_clocks {uartm_clk}]\
  -comment {Async Clock group}
 
diff --git a/verilog/dv/Makefile b/verilog/dv/Makefile
index 384be25..ca64f10 100644
--- a/verilog/dv/Makefile
+++ b/verilog/dv/Makefile
@@ -19,7 +19,7 @@
 .SUFFIXES:
 .SILENT: clean all
 
-PATTERNS = wb_port risc_boot user_risc_boot user_uart user_qspi user_i2cm riscv_regress user_basic user_usb user_pwm user_timer user_uart_master uart_master
+PATTERNS = wb_port risc_boot user_risc_boot user_uart user_uart1 user_qspi user_i2cm riscv_regress user_basic user_usb user_pwm user_timer user_uart_master uart_master
 
 all:  ${PATTERNS}
 	for i in ${PATTERNS}; do \
diff --git a/verilog/dv/user_basic/user_basic_tb.v b/verilog/dv/user_basic/user_basic_tb.v
index ef02603..94209cd 100644
--- a/verilog/dv/user_basic/user_basic_tb.v
+++ b/verilog/dv/user_basic/user_basic_tb.v
@@ -151,7 +151,7 @@
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
-	   	$dumpvars(4, user_basic_tb);
+	   	$dumpvars(0, user_basic_tb);
 	   end
        `endif
 
@@ -240,8 +240,8 @@
          wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
 	 wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data,32'h8273_8343);
-	 wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h0104_2022);
-	 wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h0004_1000);
+	 wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h0604_2022);
+	 wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h0004_2000);
 
       end
    
diff --git a/verilog/dv/user_i2cm/user_i2cm_tb.v b/verilog/dv/user_i2cm/user_i2cm_tb.v
index 6be9759..aedd191 100644
--- a/verilog/dv/user_i2cm/user_i2cm_tb.v
+++ b/verilog/dv/user_i2cm/user_i2cm_tb.v
@@ -146,7 +146,7 @@
    wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h01);
 
    // Enable I2C Multi Functional Ports
-   wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GPIO_MULTI_FUNC,'h200);
+   wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GPIO_MULTI_FUNC,'h4000);
 
    // Remove i2m reset
    wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h010);
diff --git a/verilog/dv/user_risc_boot/user_risc_boot_tb.v b/verilog/dv/user_risc_boot/user_risc_boot_tb.v
index 6f177dd..82bd34a 100644
--- a/verilog/dv/user_risc_boot/user_risc_boot_tb.v
+++ b/verilog/dv/user_risc_boot/user_risc_boot_tb.v
@@ -124,8 +124,8 @@
 
 	`ifdef WFDUMP
 	   initial begin
-	   	$dumpfile("risc_boot.vcd");
-	   	$dumpvars(2, user_risc_boot_tb);
+	   	$dumpfile("simx.vcd");
+	   	$dumpvars(3, user_risc_boot_tb);
 	   end
        `endif
 
@@ -170,23 +170,13 @@
                 // 0x3000002C = 0x66778899; 
 
                 test_fail = 0;
-		wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data);
-		if(read_data != 32'h11223344) test_fail = 1;
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data,32'h11223344);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h22334455);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h33445566);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,read_data,32'h44556677);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,read_data,32'h55667788);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,read_data,32'h66778899);
 
-		wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data);
-		if(read_data != 32'h22334455) test_fail = 1;
-
-		wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data);
-	        if(read_data != 32'h33445566) test_fail = 1;
-
-		wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,read_data);
-                if(read_data!= 32'h44556677) test_fail = 1;
-
-		wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,read_data);
-                if(read_data!= 32'h55667788) test_fail = 1;
-
-		wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,read_data) ;
-	        if(read_data != 32'h66778899) test_fail = 1;
 
 	   
 	    	$display("###################################################");
@@ -353,6 +343,40 @@
 end
 endtask
 
+task  wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg    [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='0;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  data  = wbd_ext_dat_o;  
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  if(data !== cmp_data) begin
+     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+     test_fail = 1;
+  end else begin
+     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
+  end
+  repeat (2) @(posedge clock);
+end
+endtask
+
 `ifdef GL
 
 wire        wbd_spi_stb_i   = u_top.u_spi_master.wbd_stb_i;
diff --git a/verilog/dv/user_sspi/flash0.hex b/verilog/dv/user_sspi/flash0.hex
new file mode 100755
index 0000000..5f4ad8c
--- /dev/null
+++ b/verilog/dv/user_sspi/flash0.hex
@@ -0,0 +1,26 @@
+@00000000
+00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
+10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
+20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
+30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
+40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
+50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
+60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
+70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
+80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f
+90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
+a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af
+b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
+c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
+d0 d1 d2 d3 d4 d5 d6 d7 d8 d9 da db dc dd de df
+e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 ea eb ec ed ee ef
+f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff
+
+@00000100
+00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF 
+
+@00000200
+11 11 11 11 22 22 22 22 33 33 33 33 44 44 44 44
+55 55 55 55 66 66 66 66 77 77 77 77 88 88 88 88
+99 99 99 99 AA AA AA AA BB BB BB BB CC CC CC CC
+DD DD DD DD EE EE EE EE FF FF FF FF 00 00 00 00
diff --git a/verilog/dv/user_sspi/flash1.hex b/verilog/dv/user_sspi/flash1.hex
index e3c4b1b..476541e 100755
--- a/verilog/dv/user_sspi/flash1.hex
+++ b/verilog/dv/user_sspi/flash1.hex
@@ -1,5 +1,4 @@
 @00000000
-00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
@@ -17,10 +16,10 @@
 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff
 
 @00000100
-00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF 
+11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF 00
 
 @00000200
-11 11 11 11 22 22 22 22 33 33 33 33 44 44 44 44
-55 55 55 55 66 66 66 66 77 77 77 77 88 88 88 88
-99 99 99 99 AA AA AA AA AA BB BB BB BB CC CC CC
-DD DD DD DD EE EE EE EE FF FF FF FF 00 00 00 00
+22 22 22 22 33 33 33 33 44 44 44 44 55 55 55 55 
+66 66 66 66 77 77 77 77 88 88 88 88 99 99 99 99 
+AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 
+EE EE EE EE FF FF FF FF 00 00 00 00 11 11 11 11
diff --git a/verilog/dv/user_sspi/flash2.hex b/verilog/dv/user_sspi/flash2.hex
new file mode 100755
index 0000000..477d682
--- /dev/null
+++ b/verilog/dv/user_sspi/flash2.hex
@@ -0,0 +1,24 @@
+@00000000
+20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
+30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
+40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
+50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
+60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
+70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
+80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f
+90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
+a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af
+b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
+c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
+d0 d1 d2 d3 d4 d5 d6 d7 d8 d9 da db dc dd de df
+e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 ea eb ec ed ee ef
+f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff
+
+@00000100
+22 33 44 55 66 77 88 99 AA BB CC DD EE FF 00 11
+
+@00000200
+33 33 33 33 44 44 44 44 55 55 55 55 66 66 66 66 
+77 77 77 77 88 88 88 88 99 99 99 99 AA AA AA AA 
+BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE 
+FF FF FF FF 00 00 00 00 11 11 11 11 22 22 22 22
diff --git a/verilog/dv/user_sspi/flash3.hex b/verilog/dv/user_sspi/flash3.hex
new file mode 100755
index 0000000..200525e
--- /dev/null
+++ b/verilog/dv/user_sspi/flash3.hex
@@ -0,0 +1,23 @@
+@00000000
+30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
+40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
+50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
+60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
+70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
+80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f
+90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
+a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af
+b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
+c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
+d0 d1 d2 d3 d4 d5 d6 d7 d8 d9 da db dc dd de df
+e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 ea eb ec ed ee ef
+f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff
+
+@00000100
+33 44 55 66 77 88 99 AA BB CC DD EE FF 00 11 22
+
+@00000200
+44 44 44 44 55 55 55 55 66 66 66 66 77 77 77 77 
+88 88 88 88 99 99 99 99 AA AA AA AA BB BB BB BB 
+CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF 
+00 00 00 00 11 11 11 11 22 22 22 22 11 11 11 11
diff --git a/verilog/dv/user_sspi/sspi_task.v b/verilog/dv/user_sspi/sspi_task.v
index 1ce38eb..b084a0c 100755
--- a/verilog/dv/user_sspi/sspi_task.v
+++ b/verilog/dv/user_sspi/sspi_task.v
@@ -63,7 +63,7 @@
       sspi_write_dword({cmd,address[23:0]},BIG_ENDIAN,8'h0);
       sspi_write_byte(32'h00,BIG_ENDIAN,8'h0);  // 8 Bit Dummy Cycle
       sspi_read_dword(LITTLE_ENDIAN,read_data,8'h1);
-      if(read_data != exp_data) begin
+      if(read_data !== exp_data) begin
          -> sspi_error_detected;
          $display("%m : ERROR :  Address: %x Exp : %x Rxd : %x",address,exp_data,read_data);
       end else begin
diff --git a/verilog/dv/user_sspi/user_sspi_tb.v b/verilog/dv/user_sspi/user_sspi_tb.v
index 6b6cbb4..e3cd34e 100644
--- a/verilog/dv/user_sspi/user_sspi_tb.v
+++ b/verilog/dv/user_sspi/user_sspi_tb.v
@@ -140,7 +140,7 @@
 		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
                 // Enable SPI Multi Functional Ports
-                wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GPIO_MULTI_FUNC,'h400);
+                wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GPIO_MULTI_FUNC,'h3C00);
 
 	        repeat (2) @(posedge clock);
 		#1;
@@ -155,7 +155,7 @@
 	        repeat (200) @(posedge clock);
                 wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
                 $display("############################################");
-                $display("   Testing IS62/65WVS1288GALL SSRAM Read/Write Access       ");
+                $display("   Testing IS62/65WVS1288GALL SSRAM[0] Read/Write Access       ");
                 $display("############################################");
 		// SSPI Indirect RAM READ ACCESS-
 		// Byte Read Option
@@ -207,7 +207,182 @@
 		sspi_dw_read_check(8'h03,24'h0208,32'h99AABBCC);
 		sspi_dw_read_check(8'h03,24'h020C,32'hDDEEFF00);
 
+                $display("############################################");
+                $display("   Testing IS62/65WVS1288GALL SSRAM[1] Read/Write Access       ");
+                $display("############################################");
+		// SSPI Indirect RAM READ ACCESS-
+		// Byte Read Option
+		// <Instr:0x3> <Addr:24Bit Address> <Read Data Out>
+                spi_chip_no = 2'b01; // Select the Chip Select to zero
+		sspi_dw_read_check(8'h03,24'h0000,32'h13121110);
+		sspi_dw_read_check(8'h03,24'h0004,32'h17161514);
+		sspi_dw_read_check(8'h03,24'h0008,32'h1B1A1918);
+		sspi_dw_read_check(8'h03,24'h000C,32'h1F1E1D1C);
+		
+		sspi_dw_read_check(8'h03,24'h0010,32'h23222120);
+		sspi_dw_read_check(8'h03,24'h0014,32'h27262524);
+		sspi_dw_read_check(8'h03,24'h0018,32'h2B2A2928);
+		sspi_dw_read_check(8'h03,24'h001C,32'h2F2E2D2C);
+		
+		sspi_dw_read_check(8'h03,24'h0020,32'h33323130);
+		sspi_dw_read_check(8'h03,24'h0024,32'h37363534);
+		sspi_dw_read_check(8'h03,24'h0028,32'h3B3A3938);
+		sspi_dw_read_check(8'h03,24'h002C,32'h3F3E3D3C);
 
+		sspi_dw_read_check(8'h03,24'h0030,32'h43424140);
+		sspi_dw_read_check(8'h03,24'h0034,32'h47464544);
+		sspi_dw_read_check(8'h03,24'h0038,32'h4B4A4948);
+		sspi_dw_read_check(8'h03,24'h003C,32'h4F4E4D4C);
+
+		sspi_dw_read_check(8'h03,24'h00a0,32'hb3b2b1b0);
+		sspi_dw_read_check(8'h03,24'h00a4,32'hb7b6b5b4);
+		sspi_dw_read_check(8'h03,24'h00a8,32'hbbbab9b8);
+		sspi_dw_read_check(8'h03,24'h00aC,32'hbfbebdbc);
+
+		sspi_dw_read_check(8'h03,24'h0200,32'h22222222);
+		sspi_dw_read_check(8'h03,24'h0204,32'h33333333);
+		sspi_dw_read_check(8'h03,24'h0208,32'h44444444);
+		sspi_dw_read_check(8'h03,24'h020C,32'h55555555);
+
+		// SPI Write
+		sspi_dw_write(8'h02,24'h0000,32'h00112233);
+		sspi_dw_write(8'h02,24'h0004,32'h44556677);
+		sspi_dw_write(8'h02,24'h0008,32'h8899AABB);
+		sspi_dw_write(8'h02,24'h000C,32'hCCDDEEFF);
+
+		sspi_dw_write(8'h02,24'h0200,32'h11223344);
+		sspi_dw_write(8'h02,24'h0204,32'h55667788);
+		sspi_dw_write(8'h02,24'h0208,32'h99AABBCC);
+		sspi_dw_write(8'h02,24'h020C,32'hDDEEFF00);
+
+		// SPI Read Check
+		sspi_dw_read_check(8'h03,24'h0000,32'h00112233);
+		sspi_dw_read_check(8'h03,24'h0004,32'h44556677);
+		sspi_dw_read_check(8'h03,24'h0008,32'h8899AABB);
+		sspi_dw_read_check(8'h03,24'h000C,32'hCCDDEEFF);
+
+		sspi_dw_read_check(8'h03,24'h0200,32'h11223344);
+		sspi_dw_read_check(8'h03,24'h0204,32'h55667788);
+		sspi_dw_read_check(8'h03,24'h0208,32'h99AABBCC);
+		sspi_dw_read_check(8'h03,24'h020C,32'hDDEEFF00);
+
+                $display("############################################");
+                $display("   Testing IS62/65WVS1288GALL SSRAM[2] Read/Write Access       ");
+                $display("############################################");
+		// SSPI Indirect RAM READ ACCESS-
+		// Byte Read Option
+		// <Instr:0x3> <Addr:24Bit Address> <Read Data Out>
+                spi_chip_no = 2'b10; // Select the Chip Select to zero
+		sspi_dw_read_check(8'h03,24'h0000,32'h23222120);
+		sspi_dw_read_check(8'h03,24'h0004,32'h27262524);
+		sspi_dw_read_check(8'h03,24'h0008,32'h2b2a2928);
+		sspi_dw_read_check(8'h03,24'h000C,32'h2f2e2d2c);
+
+		sspi_dw_read_check(8'h03,24'h0010,32'h33323130);
+		sspi_dw_read_check(8'h03,24'h0014,32'h37363534);
+		sspi_dw_read_check(8'h03,24'h0018,32'h3B3A3938);
+		sspi_dw_read_check(8'h03,24'h001C,32'h3F3E3D3C);
+		
+		sspi_dw_read_check(8'h03,24'h0020,32'h43424140);
+		sspi_dw_read_check(8'h03,24'h0024,32'h47464544);
+		sspi_dw_read_check(8'h03,24'h0028,32'h4B4A4948);
+		sspi_dw_read_check(8'h03,24'h002C,32'h4F4E4D4C);
+		
+		sspi_dw_read_check(8'h03,24'h0030,32'h53525150);
+		sspi_dw_read_check(8'h03,24'h0034,32'h57565554);
+		sspi_dw_read_check(8'h03,24'h0038,32'h5B5A5958);
+		sspi_dw_read_check(8'h03,24'h003C,32'h5F5E5D5C);
+
+		sspi_dw_read_check(8'h03,24'h0040,32'h63626160);
+		sspi_dw_read_check(8'h03,24'h0044,32'h67666564);
+		sspi_dw_read_check(8'h03,24'h0048,32'h6B6A6968);
+		sspi_dw_read_check(8'h03,24'h004C,32'h6F6E6D6C);
+
+		sspi_dw_read_check(8'h03,24'h00a0,32'hc3c2c1c0);
+		sspi_dw_read_check(8'h03,24'h00a4,32'hc7c6c5c4);
+		sspi_dw_read_check(8'h03,24'h00a8,32'hcbcac9c8);
+		sspi_dw_read_check(8'h03,24'h00aC,32'hcfcecdcc);
+
+		sspi_dw_read_check(8'h03,24'h0200,32'h33333333);
+		sspi_dw_read_check(8'h03,24'h0204,32'h44444444);
+		sspi_dw_read_check(8'h03,24'h0208,32'h55555555);
+		sspi_dw_read_check(8'h03,24'h020C,32'h66666666);
+
+		// SPI Write
+		sspi_dw_write(8'h02,24'h0000,32'h00112233);
+		sspi_dw_write(8'h02,24'h0004,32'h44556677);
+		sspi_dw_write(8'h02,24'h0008,32'h8899AABB);
+		sspi_dw_write(8'h02,24'h000C,32'hCCDDEEFF);
+
+		sspi_dw_write(8'h02,24'h0200,32'h11223344);
+		sspi_dw_write(8'h02,24'h0204,32'h55667788);
+		sspi_dw_write(8'h02,24'h0208,32'h99AABBCC);
+		sspi_dw_write(8'h02,24'h020C,32'hDDEEFF00);
+
+		// SPI Read Check
+		sspi_dw_read_check(8'h03,24'h0000,32'h00112233);
+		sspi_dw_read_check(8'h03,24'h0004,32'h44556677);
+		sspi_dw_read_check(8'h03,24'h0008,32'h8899AABB);
+		sspi_dw_read_check(8'h03,24'h000C,32'hCCDDEEFF);
+
+		sspi_dw_read_check(8'h03,24'h0200,32'h11223344);
+		sspi_dw_read_check(8'h03,24'h0204,32'h55667788);
+		sspi_dw_read_check(8'h03,24'h0208,32'h99AABBCC);
+		sspi_dw_read_check(8'h03,24'h020C,32'hDDEEFF00);
+
+                $display("############################################");
+                $display("   Testing IS62/65WVS1288GALL SSRAM[3] Read/Write Access       ");
+                $display("############################################");
+		// SSPI Indirect RAM READ ACCESS-
+		// Byte Read Option
+		// <Instr:0x3> <Addr:24Bit Address> <Read Data Out>
+                spi_chip_no = 2'b11; // Select the Chip Select to zero
+		sspi_dw_read_check(8'h03,24'h0000,32'h33323130);
+		sspi_dw_read_check(8'h03,24'h0004,32'h37363534);
+		sspi_dw_read_check(8'h03,24'h0008,32'h3b3a3938);
+		sspi_dw_read_check(8'h03,24'h000C,32'h3f3e3d3c);
+
+		sspi_dw_read_check(8'h03,24'h0010,32'h43424140);
+		sspi_dw_read_check(8'h03,24'h0014,32'h47464544);
+		sspi_dw_read_check(8'h03,24'h0018,32'h4B4A4948);
+		sspi_dw_read_check(8'h03,24'h001C,32'h4F4E4D4C);
+
+		sspi_dw_read_check(8'h03,24'h0020,32'h53525150);
+		sspi_dw_read_check(8'h03,24'h0024,32'h57565554);
+		sspi_dw_read_check(8'h03,24'h0028,32'h5B5A5958);
+		sspi_dw_read_check(8'h03,24'h002C,32'h5F5E5D5C);
+
+		sspi_dw_read_check(8'h03,24'h00a0,32'hd3d2d1d0);
+		sspi_dw_read_check(8'h03,24'h00a4,32'hd7d6d5d4);
+		sspi_dw_read_check(8'h03,24'h00a8,32'hdbdad9d8);
+		sspi_dw_read_check(8'h03,24'h00aC,32'hdfdedddc);
+
+		sspi_dw_read_check(8'h03,24'h0200,32'h44444444);
+		sspi_dw_read_check(8'h03,24'h0204,32'h55555555);
+		sspi_dw_read_check(8'h03,24'h0208,32'h66666666);
+		sspi_dw_read_check(8'h03,24'h020C,32'h77777777);
+
+		// SPI Write
+		sspi_dw_write(8'h02,24'h0000,32'h00112233);
+		sspi_dw_write(8'h02,24'h0004,32'h44556677);
+		sspi_dw_write(8'h02,24'h0008,32'h8899AABB);
+		sspi_dw_write(8'h02,24'h000C,32'hCCDDEEFF);
+
+		sspi_dw_write(8'h02,24'h0200,32'h11223344);
+		sspi_dw_write(8'h02,24'h0204,32'h55667788);
+		sspi_dw_write(8'h02,24'h0208,32'h99AABBCC);
+		sspi_dw_write(8'h02,24'h020C,32'hDDEEFF00);
+
+		// SPI Read Check
+		sspi_dw_read_check(8'h03,24'h0000,32'h00112233);
+		sspi_dw_read_check(8'h03,24'h0004,32'h44556677);
+		sspi_dw_read_check(8'h03,24'h0008,32'h8899AABB);
+		sspi_dw_read_check(8'h03,24'h000C,32'hCCDDEEFF);
+
+		sspi_dw_read_check(8'h03,24'h0200,32'h11223344);
+		sspi_dw_read_check(8'h03,24'h0204,32'h55667788);
+		sspi_dw_read_check(8'h03,24'h0208,32'h99AABBCC);
+		sspi_dw_read_check(8'h03,24'h020C,32'hDDEEFF00);
 		repeat (100) @(posedge clock);
 			// $display("+1000 cycles");
 
@@ -284,7 +459,6 @@
 //  ----------------------------------------------------
    wire flash_io1;
    wire flash_clk = io_out[16];
-   wire spiram_csb = io_out[13];
    tri  #1 flash_io0 = io_out[15];
    assign io_in[14] = flash_io1;
 
@@ -292,18 +466,57 @@
    tri  #1 flash_io3 = 1'b1;
 
 
-   is62wvs1288 #(.mem_file_name("flash1.hex"))
-	u_sfram (
+   wire spiram_csb0 = io_out[13];
+   is62wvs1288 #(.mem_file_name("flash0.hex"))
+	u_sfram_0 (
          // Data Inputs/Outputs
            .io0     (flash_io0),
            .io1     (flash_io1),
            // Controls
            .clk    (flash_clk),
-           .csb    (spiram_csb),
+           .csb    (spiram_csb0),
            .io2    (flash_io2),
            .io3    (flash_io3)
     );
 
+   wire spiram_csb1 = io_out[12];
+   is62wvs1288 #(.mem_file_name("flash1.hex"))
+	u_sfram_1 (
+         // Data Inputs/Outputs
+           .io0     (flash_io0),
+           .io1     (flash_io1),
+           // Controls
+           .clk    (flash_clk),
+           .csb    (spiram_csb1),
+           .io2    (flash_io2),
+           .io3    (flash_io3)
+    );
+
+   wire spiram_csb2 = io_out[9];
+is62wvs1288 #(.mem_file_name("flash2.hex"))
+     u_sfram_2 (
+      // Data Inputs/Outputs
+	.io0     (flash_io0),
+	.io1     (flash_io1),
+	// Controls
+	.clk    (flash_clk),
+	.csb    (spiram_csb2),
+	.io2    (flash_io2),
+	.io3    (flash_io3)
+ );
+
+   wire spiram_csb3 = io_out[8];
+is62wvs1288 #(.mem_file_name("flash3.hex"))
+     u_sfram_3 (
+      // Data Inputs/Outputs
+	.io0     (flash_io0),
+	.io1     (flash_io1),
+	// Controls
+	.clk    (flash_clk),
+	.csb    (spiram_csb3),
+	.io2    (flash_io2),
+	.io3    (flash_io3)
+ );
 
 //----------------------------------------------------
 //  Task
diff --git a/verilog/dv/user_uart/user_uart_tb.v b/verilog/dv/user_uart/user_uart_tb.v
index ad07b17..41e89c2 100644
--- a/verilog/dv/user_uart/user_uart_tb.v
+++ b/verilog/dv/user_uart/user_uart_tb.v
@@ -146,8 +146,7 @@
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
-	   	$dumpvars(1, user_uart_tb);
-	   	$dumpvars(0, user_uart_tb.u_top);
+	   	$dumpvars(0, user_uart_tb);
 	   end
        `endif
 
@@ -193,7 +192,7 @@
    repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
    tb_uart.uart_init;
-   wb_user_core_write(`ADDR_SPACE_UART+8'h0,{3'h0,2'b00,1'b1,1'b1,1'b1});  
+   wb_user_core_write(`ADDR_SPACE_UART0+8'h0,{3'h0,2'b00,1'b1,1'b1,1'b1});  
    tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
 	                          uart_stick_parity, uart_timeout, uart_divisor);
 
diff --git a/verilog/dv/user_uart1/Makefile b/verilog/dv/user_uart1/Makefile
new file mode 100644
index 0000000..046c8df
--- /dev/null
+++ b/verilog/dv/user_uart1/Makefile
@@ -0,0 +1,84 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+ 
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC64_PREFIX?=riscv64-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = user_uart1
+
+all:  ${PATTERN:=.vcd}
+
+
+vvp:  ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
+	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
+	${GCC64_PREFIX}-gcc -o user_uart.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_uart.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+	${GCC64_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
+	${GCC64_PREFIX}-objdump -D user_uart.elf > user_uart.dump
+	rm crt.o user_uart.o
+ifeq ($(SIM),RTL)
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	$< -o $@ 
+   endif
+else  
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	$< -o $@ 
+endif
+
+%.vcd: %.vvp
+	vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump
+
+.PHONY: clean hex all
diff --git a/verilog/dv/user_uart1/run_iverilog b/verilog/dv/user_uart1/run_iverilog
new file mode 100755
index 0000000..e461fd1
--- /dev/null
+++ b/verilog/dv/user_uart1/run_iverilog
@@ -0,0 +1,42 @@
+# //////////////////////////////////////////////////////////////////////////////
+# // SPDX-FileCopyrightText: 2021, Dinesh Annayya
+# // 
+# // Licensed under the Apache License, Version 2.0 (the "License");
+# // you may not use this file except in compliance with the License.
+# // You may obtain a copy of the License at
+# //
+# //      http://www.apache.org/licenses/LICENSE-2.0
+# //
+# // Unless required by applicable law or agreed to in writing, software
+# // distributed under the License is distributed on an "AS IS" BASIS,
+# // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# // See the License for the specific language governing permissions and
+# // limitations under the License.
+# // SPDX-License-Identifier: Apache-2.0
+# // SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
+# // //////////////////////////////////////////////////////////////////////////
+riscv64-unknown-elf-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=1 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I../../rtl/syntacore/scr1/sim/tests/common  user_uart.c -o user_uart.o
+
+riscv64-unknown-elf-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=1 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I../../rtl/syntacore/scr1/sim/tests/common/  ../../rtl/syntacore/scr1/sim/tests/common/crt_tcm.S -o crt_tcm.o
+
+riscv64-unknown-elf-gcc -o user_uart.elf -T ../../rtl/syntacore/scr1/sim/tests/common/link_tcm.ld user_uart.o crt_tcm.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32
+
+riscv64-unknown-elf-objcopy -O verilog user_uart.elf user_uart.hex
+
+riscv64-unknown-elf-objdump -D user_uart.elf > user_uart.dump
+
+rm crt_tcm.o user_uart.o
+
+#iverilog with waveform dump
+iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $PDK_PATH -I  ../../../caravel/verilog/rtl  -I ../ -I ../../../verilog/rtl -I ../ -I ../../../verilog -I ../../../verilog/rtl/syntacore/scr1/src/includes   -I ../../../verilog/rtl/sdram_ctrl/src/defs -I ../../../verilog/rtl/i2cm/src/includes -I ../../../verilog/rtl/usb1_host/src/includes -I $CARAVEL_ROOT/verilog/dv/caravel -I ../model -I ../agents user_uart_tb.v -o user_uart_tb.vvp
+
+
+#iverilog -g2005-sv -I $PDK_PATH -DFUNCTIONAL -DSIM -I  ../../../caravel/verilog/rtl -I ../ -I ../../../verilog/rtl -I ../../../verilog -I ../../../verilog/rtl/syntacore/scr1/src/includes   -I ../../../verilog/rtl/sdram_ctrl/src/defs -I $CARAVEL_ROOT/verilog/dv/caravel -I ../model -I ../agents user_uart_tb.v -o user_uart_tb.vvp
+
+# GLS 
+#iverilog -g2005-sv -D GL -D FUNCTIONAL -I $PDK_PATH -I  ../../../caravel/verilog/rtl  -I ../ -I ../../../verilog/gl -I ../../../verilog -I /home/dinesha/workarea/pdk/sky130A -I ../../../verilog/rtl/syntacore/scr1/src/includes   -I ../../../verilog/rtl/sdram_ctrl/src/defs -I $CARAVEL_ROOT/verilog/dv/caravel -I ../model -I ../agents user_uart_tb.v -o user_uart_tb.vvp
+#
+
+vvp user_uart_tb.vvp | tee test.log
+
+\rm -rf user_uart_tb.vvp
diff --git a/verilog/dv/user_uart1/user_uart.c b/verilog/dv/user_uart1/user_uart.c
new file mode 100644
index 0000000..ac8c50f
--- /dev/null
+++ b/verilog/dv/user_uart1/user_uart.c
@@ -0,0 +1,43 @@
+//////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021, Dinesh Annayya
+// 
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
+// //////////////////////////////////////////////////////////////////////////
+#define SC_SIM_OUTPORT (0xf0000000)
+#define uint32_t  long
+
+
+#define reg_mprj_uart_reg0 (*(volatile uint32_t*)0x10010100)
+#define reg_mprj_uart_reg1 (*(volatile uint32_t*)0x10010104)
+#define reg_mprj_uart_reg2 (*(volatile uint32_t*)0x10010108)
+#define reg_mprj_uart_reg3 (*(volatile uint32_t*)0x1001010C)
+#define reg_mprj_uart_reg4 (*(volatile uint32_t*)0x10010110)
+#define reg_mprj_uart_reg5 (*(volatile uint32_t*)0x10010114)
+#define reg_mprj_uart_reg6 (*(volatile uint32_t*)0x10010118)
+#define reg_mprj_uart_reg7 (*(volatile uint32_t*)0x1001011C)
+#define reg_mprj_uart_reg8 (*(volatile uint32_t*)0x10010120)
+
+int main()
+{
+
+    while(1) {
+       // Check UART RX fifo has data, if available loop back the data
+       if(reg_mprj_uart_reg8 != 0) { 
+	   reg_mprj_uart_reg5 = reg_mprj_uart_reg6;
+       }
+    }
+
+    return 0;
+}
diff --git a/verilog/dv/user_uart1/user_uart1_tb.v b/verilog/dv/user_uart1/user_uart1_tb.v
new file mode 100644
index 0000000..4946c9f
--- /dev/null
+++ b/verilog/dv/user_uart1/user_uart1_tb.v
@@ -0,0 +1,469 @@
+////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText:  2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
+//////////////////////////////////////////////////////////////////////
+////                                                              ////
+////  Standalone User validation Test bench                       ////
+////                                                              ////
+////  This file is part of the YIFive cores project               ////
+////  https://github.com/dineshannayya/yifive_r0.git              ////
+////  http://www.opencores.org/cores/yifive/                      ////
+////                                                              ////
+////  Description                                                 ////
+////   This is a standalone test bench to validate the            ////
+////   Digital core.                                              ////
+////   1. User Risc core is booted using  compiled code of        ////
+////      user_risc_boot.c                                        ////
+////   2. User Risc core uses Serial Flash and SDRAM to boot      ////
+////   3. After successful boot, Risc core will check the UART    ////
+////      RX Data, If it's available then it loop back the same   ////
+////      data in uart tx                                         ////
+////   4. Test bench send random 40 character towards User uart   ////
+////      and expect same data to return back                     ////
+////                                                              ////
+////  To Do:                                                      ////
+////    nothing                                                   ////
+////                                                              ////
+////  Author(s):                                                  ////
+////      - Dinesh Annayya, dinesha@opencores.org                 ////
+////                                                              ////
+////  Revision :                                                  ////
+////    0.1 - 16th Feb 2021, Dinesh A                             ////
+////                                                              ////
+//////////////////////////////////////////////////////////////////////
+////                                                              ////
+//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
+////                                                              ////
+//// This source file may be used and distributed without         ////
+//// restriction provided that this copyright statement is not    ////
+//// removed from the file and that any derivative work contains  ////
+//// the original copyright notice and the associated disclaimer. ////
+////                                                              ////
+//// This source file is free software; you can redistribute it   ////
+//// and/or modify it under the terms of the GNU Lesser General   ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any   ////
+//// later version.                                               ////
+////                                                              ////
+//// This source is distributed in the hope that it will be       ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
+//// PURPOSE.  See the GNU Lesser General Public License for more ////
+//// details.                                                     ////
+////                                                              ////
+//// You should have received a copy of the GNU Lesser General    ////
+//// Public License along with this source; if not, download it   ////
+//// from http://www.opencores.org/lgpl.shtml                     ////
+////                                                              ////
+//////////////////////////////////////////////////////////////////////
+
+`default_nettype wire
+
+`timescale 1 ns/1 ps
+
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "uart_agent.v"
+
+
+module user_uart1_tb;
+
+reg            clock         ;
+reg            wb_rst_i      ;
+reg            power1, power2;
+reg            power3, power4;
+
+reg            wbd_ext_cyc_i;  // strobe/request
+reg            wbd_ext_stb_i;  // strobe/request
+reg [31:0]     wbd_ext_adr_i;  // address
+reg            wbd_ext_we_i;  // write
+reg [31:0]     wbd_ext_dat_i;  // data output
+reg [3:0]      wbd_ext_sel_i;  // byte enable
+
+wire [31:0]    wbd_ext_dat_o;  // data input
+wire           wbd_ext_ack_o;  // acknowlegement
+wire           wbd_ext_err_o;  // error
+
+// User I/O
+wire [37:0]    io_oeb        ;
+wire [37:0]    io_out        ;
+wire [37:0]    io_in         ;
+
+wire [37:0]    mprj_io       ;
+wire [7:0]     mprj_io_0     ;
+reg            test_fail     ;
+reg [31:0]     read_data     ;
+//----------------------------------
+// Uart Configuration
+// ---------------------------------
+reg [1:0]      uart_data_bit        ;
+reg	       uart_stop_bits       ; // 0: 1 stop bit; 1: 2 stop bit;
+reg	       uart_stick_parity    ; // 1: force even parity
+reg	       uart_parity_en       ; // parity enable
+reg	       uart_even_odd_parity ; // 0: odd parity; 1: even parity
+
+reg [7:0]      uart_data            ;
+reg [15:0]     uart_divisor         ;	// divided by n * 16
+reg [15:0]     uart_timeout         ;// wait time limit
+
+reg [15:0]     uart_rx_nu           ;
+reg [15:0]     uart_tx_nu           ;
+reg [7:0]      uart_write_data [0:39];
+reg 	       uart_fifo_enable     ;	// fifo mode disable
+
+	integer    d_risc_id;
+
+integer i,j;
+
+	// External clock is used by default.  Make this artificially fast for the
+	// simulation.  Normally this would be a slow clock and the digital PLL
+	// would be the fast clock.
+
+	always #12.5 clock <= (clock === 1'b0);
+
+	initial begin
+		clock = 0;
+                wbd_ext_cyc_i ='h0;  // strobe/request
+                wbd_ext_stb_i ='h0;  // strobe/request
+                wbd_ext_adr_i ='h0;  // address
+                wbd_ext_we_i  ='h0;  // write
+                wbd_ext_dat_i ='h0;  // data output
+                wbd_ext_sel_i ='h0;  // byte enable
+	end
+
+	`ifdef WFDUMP
+	   initial begin
+	   	$dumpfile("simx.vcd");
+	   	$dumpvars(0, user_uart1_tb);
+	   end
+       `endif
+
+	initial begin
+		wb_rst_i <= 1'b1;
+		#100;
+		wb_rst_i <= 1'b0;	    	// Release reset
+	end
+initial
+begin
+   uart_data_bit           = 2'b11;
+   uart_stop_bits          = 0; // 0: 1 stop bit; 1: 2 stop bit;
+   uart_stick_parity       = 0; // 1: force even parity
+   uart_parity_en          = 0; // parity enable
+   uart_even_odd_parity    = 1; // 0: odd parity; 1: even parity
+   uart_divisor            = 15;// divided by n * 16
+   uart_timeout            = 500;// wait time limit
+   uart_fifo_enable        = 0;	// fifo mode disable
+
+   $value$plusargs("risc_core_id=%d", d_risc_id);
+
+   #200; // Wait for reset removal
+   repeat (10) @(posedge clock);
+   $display("Monitor: Standalone User Uart Test Started");
+   
+   // Remove Wb Reset
+   wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+
+   // Enable UART Multi Functional Ports
+   wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GPIO_MULTI_FUNC,'h200);
+   
+   repeat (2) @(posedge clock);
+   #1;
+   // Remove all the reset
+   if(d_risc_id == 0) begin
+	$display("STATUS: Working with Risc core 0");
+	wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h143);
+   end else if(d_risc_id == 1) begin
+	$display("STATUS: Working with Risc core 1");
+	wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h243);
+   end else if(d_risc_id == 2) begin
+	$display("STATUS: Working with Risc core 2");
+	wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h443);
+   end else if(d_risc_id == 3) begin
+	$display("STATUS: Working with Risc core 2");
+	wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h84F);
+   end
+
+   repeat (100) @(posedge clock);  // wait for Processor Get Ready
+
+   tb_uart.uart_init;
+   wb_user_core_write(`ADDR_SPACE_UART1+8'h0,{3'h0,2'b00,1'b1,1'b1,1'b1});  
+   tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
+	                          uart_stick_parity, uart_timeout, uart_divisor);
+
+   repeat (30000) @(posedge clock);  // wait for Processor Get Ready
+   
+   
+   for (i=0; i<40; i=i+1)
+   	uart_write_data[i] = $random;
+   
+   
+   
+   fork
+      begin
+         for (i=0; i<40; i=i+1)
+         begin
+           $display ("\n... UART Agent Writing char %x ...", uart_write_data[i]);
+            tb_uart.write_char (uart_write_data[i]);
+         end
+      end
+   
+      begin
+         for (j=0; j<40; j=j+1)
+         begin
+           tb_uart.read_char_chk(uart_write_data[j]);
+         end
+      end
+      join
+   
+      #100
+      tb_uart.report_status(uart_rx_nu, uart_tx_nu);
+   
+      test_fail = 0;
+
+      // Check 
+      // if all the 40 byte transmitted
+      // if all the 40 byte received
+      // if no error 
+      if(uart_tx_nu != 40) test_fail = 1;
+      if(uart_rx_nu != 40) test_fail = 1;
+      if(tb_uart.err_cnt != 0) test_fail = 1;
+
+      $display("###################################################");
+      if(test_fail == 0) begin
+         `ifdef GL
+             $display("Monitor: Standalone User UART Test (GL) Passed");
+         `else
+             $display("Monitor: Standalone User UART Test (RTL) Passed");
+         `endif
+      end else begin
+          `ifdef GL
+              $display("Monitor: Standalone User UART Test (GL) Failed");
+          `else
+              $display("Monitor: Standalone User UART Test (RTL) Failed");
+          `endif
+       end
+      $display("###################################################");
+      #100
+      $finish;
+end
+
+
+wire USER_VDD1V8 = 1'b1;
+wire VSS = 1'b0;
+
+
+user_project_wrapper u_top(
+`ifdef USE_POWER_PINS
+    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
+    .vssd1(VSS),	// User area 1 digital ground
+`endif
+    .wb_clk_i        (clock),  // System clock
+    .user_clock2     (1'b1),  // Real-time clock
+    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
+
+    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
+    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
+    .wbs_adr_i   (wbd_ext_adr_i),  // address
+    .wbs_we_i    (wbd_ext_we_i),  // write
+    .wbs_dat_i   (wbd_ext_dat_i),  // data output
+    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
+
+    .wbs_dat_o   (wbd_ext_dat_o),  // data input
+    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
+
+ 
+    // Logic Analyzer Signals
+    .la_data_in      ('1) ,
+    .la_data_out     (),
+    .la_oenb         ('0),
+ 
+
+    // IOs
+    .io_in          (io_in)  ,
+    .io_out         (io_out) ,
+    .io_oeb         (io_oeb) ,
+
+    .user_irq       () 
+
+);
+
+`ifndef GL // Drive Power for Hold Fix Buf
+    // All standard cell need power hook-up for functionality work
+    initial begin
+    end
+`endif    
+
+
+//------------------------------------------------------
+//  Integrate the Serial flash with qurd support to
+//  user core using the gpio pads
+//  ----------------------------------------------------
+
+   wire flash_clk = io_out[24];
+   wire flash_csb = io_out[25];
+   // Creating Pad Delay
+   wire #1 io_oeb_29 = io_oeb[29];
+   wire #1 io_oeb_30 = io_oeb[30];
+   wire #1 io_oeb_31 = io_oeb[31];
+   wire #1 io_oeb_32 = io_oeb[32];
+   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+
+   assign io_in[29] = flash_io0;
+   assign io_in[30] = flash_io1;
+   assign io_in[31] = flash_io2;
+   assign io_in[32] = flash_io3;
+
+
+   // Quard flash
+     s25fl256s #(.mem_file_name("user_uart.hex"),
+	         .otp_file_name("none"), 
+                 .TimingModel("S25FL512SAGMFI010_F_30pF")) 
+		 u_spi_flash_256mb
+       (
+           // Data Inputs/Outputs
+       .SI      (flash_io0),
+       .SO      (flash_io1),
+       // Controls
+       .SCK     (flash_clk),
+       .CSNeg   (flash_csb),
+       .WPNeg   (flash_io2),
+       .HOLDNeg (flash_io3),
+       .RSTNeg  (!wb_rst_i)
+
+       );
+
+
+//---------------------------
+//  UART Agent integration
+// --------------------------
+wire uart_txd,uart_rxd;
+
+assign uart_txd   = io_out[5];
+assign io_in[3]  = uart_rxd ;
+ 
+uart_agent tb_uart(
+	.mclk                (clock              ),
+	.txd                 (uart_rxd           ),
+	.rxd                 (uart_txd           )
+	);
+
+
+task wb_user_core_write;
+input [31:0] address;
+input [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h1;  // write
+  wbd_ext_dat_i =data;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
+  repeat (2) @(posedge clock);
+end
+endtask
+
+task  wb_user_core_read;
+input [31:0] address;
+output [31:0] data;
+reg    [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='0;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  data  = wbd_ext_dat_o;  
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
+  repeat (2) @(posedge clock);
+end
+endtask
+
+`ifdef GL
+
+wire        wbd_spi_stb_i   = u_top.u_spi_master.wbd_stb_i;
+wire        wbd_spi_ack_o   = u_top.u_spi_master.wbd_ack_o;
+wire        wbd_spi_we_i    = u_top.u_spi_master.wbd_we_i;
+wire [31:0] wbd_spi_adr_i   = u_top.u_spi_master.wbd_adr_i;
+wire [31:0] wbd_spi_dat_i   = u_top.u_spi_master.wbd_dat_i;
+wire [31:0] wbd_spi_dat_o   = u_top.u_spi_master.wbd_dat_o;
+wire [3:0]  wbd_spi_sel_i   = u_top.u_spi_master.wbd_sel_i;
+
+wire        wbd_sdram_stb_i = u_top.u_sdram_ctrl.wb_stb_i;
+wire        wbd_sdram_ack_o = u_top.u_sdram_ctrl.wb_ack_o;
+wire        wbd_sdram_we_i  = u_top.u_sdram_ctrl.wb_we_i;
+wire [31:0] wbd_sdram_adr_i = u_top.u_sdram_ctrl.wb_addr_i;
+wire [31:0] wbd_sdram_dat_i = u_top.u_sdram_ctrl.wb_dat_i;
+wire [31:0] wbd_sdram_dat_o = u_top.u_sdram_ctrl.wb_dat_o;
+wire [3:0]  wbd_sdram_sel_i = u_top.u_sdram_ctrl.wb_sel_i;
+
+wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb.reg_cs;
+wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb.reg_ack;
+wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb.reg_wr;
+wire [7:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb.reg_addr;
+wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb.reg_wdata;
+wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb.reg_rdata;
+wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb.reg_be;
+
+`endif
+
+/**
+`ifdef GL
+//-----------------------------------------------------------------------------
+// RISC IMEM amd DMEM Monitoring TASK
+//-----------------------------------------------------------------------------
+
+`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
+
+always@(posedge `RISC_CORE.wb_clk) begin
+    if(`RISC_CORE.wbd_imem_ack_i)
+          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
+    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
+          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
+    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
+          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
+end
+
+`endif
+**/
+endmodule
+`include "s25fl256s.sv"
+`default_nettype wire
diff --git a/verilog/rtl/pinmux/src/pinmux.sv b/verilog/rtl/pinmux/src/pinmux.sv
index c26bbe4..c07e16e 100755
--- a/verilog/rtl/pinmux/src/pinmux.sv
+++ b/verilog/rtl/pinmux/src/pinmux.sv
@@ -34,6 +34,9 @@
 ////  Revision :                                                  ////
 ////    0.1 - 16th Feb 2021, Dinesh A                             ////
 ////          initial version                                     ////
+////    0.2 - 6 April 2021, Dinesh A                              ////
+////          1. SSPI CS# increased from 1 to 4                   ////
+//            2. UART I/F increase from 1 to 2                    ////
 //////////////////////////////////////////////////////////////////////
 
 module pinmux (
@@ -55,7 +58,7 @@
                        output logic            cpu_intf_rst_n   ,
                        output logic            qspim_rst_n      ,
                        output logic            sspim_rst_n      ,
-                       output logic            uart_rst_n       ,
+                       output logic [1:0]      uart_rst_n       ,
                        output logic            i2cm_rst_n       ,
                        output logic            usb_rst_n        ,
 
@@ -106,8 +109,8 @@
 		       output   logic          usb_dn_i,
 
 		       // UART I/F
-		       input   logic           uart_txd,
-		       output  logic           uart_rxd,
+		       input   logic  [1:0]    uart_txd,
+		       output  logic  [1:0]    uart_rxd,
 
 		       // I2CM I/F
 		       input   logic           i2cm_clk_o,
@@ -119,7 +122,7 @@
 
 		       // SPI MASTER
 		       input   logic           spim_sck,
-		       input   logic           spim_ss,
+		       input   logic [3:0]     spim_ssn,
 		       input   logic           spim_miso,
 		       output  logic           spim_mosi,
 
@@ -542,9 +545,9 @@
 
 assign      cfg_pwm_enb          = cfg_multi_func_sel[5:0];
 wire [1:0]  cfg_int_enb          = cfg_multi_func_sel[7:6];
-wire        cfg_uart_enb         = cfg_multi_func_sel[8];
-wire        cfg_i2cm_enb         = cfg_multi_func_sel[9];
-wire        cfg_spim_enb         = cfg_multi_func_sel[10];
+wire [1:0]  cfg_uart_enb         = cfg_multi_func_sel[9:8];
+wire [3:0]  cfg_spim_enb         = cfg_multi_func_sel[13:10];
+wire        cfg_i2cm_enb         = cfg_multi_func_sel[14];
 
 wire [7:0]  cfg_port_a_dir_sel   = cfg_gpio_dir_sel[7:0];
 wire [7:0]  cfg_port_b_dir_sel   = cfg_gpio_dir_sel[15:8];
@@ -567,23 +570,24 @@
      //Pin-1        PC6/RESET*          digital_io[0]
      port_c_in[6] = digital_io_in[0];
 
-     //Pin-2        PD0/RXD             digital_io[1]
+     //Pin-2        PD0/RXD[0]             digital_io[1]
      port_d_in[0] = digital_io_in[1];
-     if(cfg_uart_enb)  uart_rxd      = digital_io_in[1];
+     if(cfg_uart_enb[0])  uart_rxd[0]   = digital_io_in[1];
   
-     //Pin-3        PD1/TXD             digital_io[2]
+     //Pin-3        PD1/TXD[0]             digital_io[2]
      port_d_in[1] = digital_io_in[2];
 
 
-     //Pin-4        PD2/INT0            digital_io[3]
+     //Pin-4        PD2/RXD[1]/INT0       digital_io[3]
      port_d_in[2] = digital_io_in[3];
-     if(cfg_int_enb[0]) ext_intr_in[0] = digital_io_in[3];
+     if(cfg_uart_enb[1])     uart_rxd[1]    = digital_io_in[3];
+     else if(cfg_int_enb[0]) ext_intr_in[0] = digital_io_in[3];
 
      //Pin-5        PD3/INT1/OC2B(PWM0)  digital_io[4]
      port_d_in[3] = digital_io_in[4];
      if(cfg_int_enb[1]) ext_intr_in[1] = digital_io_in[4];
 
-     //Pin-6        PD4                 digital_io[5]
+     //Pin-6        PD4/TXD[1]          digital_io[5]
      port_d_in[4] = digital_io_in[5];
 
      //Pin-9        PB6/XTAL1/TOSC1     digital_io[6]
@@ -612,7 +616,7 @@
 
      //Pin-17       PB3/MOSI/OC2A(PWM5) digital_io[14]
      port_b_in[3] = digital_io_in[14];
-     if(cfg_spim_enb) spim_mosi = digital_io_in[14];
+     if(cfg_spim_enb[0]) spim_mosi = digital_io_in[14];
 
      //Pin-18       PB4/MISO            digital_io[15]
      port_b_in[4] = digital_io_in[15];
@@ -658,23 +662,24 @@
      //Pin-1        PC6/RESET*          digital_io[0]
      if(cfg_port_c_dir_sel[6])       digital_io_out[0]   = port_c_out[6];
 
-     //Pin-2        PD0/RXD             digital_io[1]
+     //Pin-2        PD0/RXD[0]       digital_io[1]
      if(cfg_port_d_dir_sel[0])       digital_io_out[1]   = port_d_out[0];
   
-     //Pin-3        PD1/TXD             digital_io[2]
-     if     (cfg_uart_enb)           digital_io_out[2]   = uart_txd;
+     //Pin-3        PD1/TXD[0]             digital_io[2]
+     if     (cfg_uart_enb[0])        digital_io_out[2]   = uart_txd[0];
      else if(cfg_port_d_dir_sel[1])  digital_io_out[2]   = port_d_out[1];
 
 
-     //Pin-4        PD2/INT0            digital_io[3]
+     //Pin-4        PD2/RXD[1]/INT0  digital_io[3]
      if(cfg_port_d_dir_sel[2])       digital_io_out[3]   = port_d_out[2];
 
      //Pin-5        PD3/INT1/OC2B(PWM0)  digital_io[4]
      if(cfg_pwm_enb[0])              digital_io_out[4]   = pwm_wfm[0];
      else if(cfg_port_d_dir_sel[3])  digital_io_out[4]   = port_d_out[3];
 
-     //Pin-6        PD4                 digital_io[5]
-     if(cfg_port_d_dir_sel[4])       digital_io_out[5]   = port_d_out[4];
+     //Pin-6        PD4/TXD[1]                 digital_io[5]
+     if   (cfg_uart_enb[1])               digital_io_out[5]   = uart_txd[1];
+     else if(cfg_port_d_dir_sel[4])       digital_io_out[5]   = port_d_out[4];
 
      //Pin-9        PB6/XTAL1/TOSC1     digital_io[6]
      if(cfg_port_b_dir_sel[6])       digital_io_out[6]   = port_b_out[6];
@@ -683,12 +688,14 @@
      // Pin-10       PB7/XTAL2/TOSC2     digital_io[7]
      if(cfg_port_b_dir_sel[7])       digital_io_out[7]   = port_b_out[7];
 
-     //Pin-11       PD5/OC0B(PWM1)/T1   digital_io[8]
+     //Pin-11       PD5/SS[3]/OC0B(PWM1)/T1   digital_io[8]
      if(cfg_pwm_enb[1])              digital_io_out[8]   = pwm_wfm[1];
+     else if(cfg_spim_enb[3])        digital_io_out[8]  = spim_ssn[3];
      else if(cfg_port_d_dir_sel[5])  digital_io_out[8]   = port_d_out[5];
 
-     //Pin-12       PD6/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
+     //Pin-12       PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
      if(cfg_pwm_enb[2])              digital_io_out[9]   = pwm_wfm[2];
+     else if(cfg_spim_enb[2])        digital_io_out[9]   = spim_ssn[2];
      else if(cfg_port_d_dir_sel[6])  digital_io_out[9]   = port_d_out[6];
 
 
@@ -698,13 +705,14 @@
      //Pin-14       PB0/CLKO/ICP1       digital_io[11]
      if(cfg_port_b_dir_sel[0])       digital_io_out[11]  = port_b_out[0];
 
-     //Pin-15       PB1/OC1A(PWM3)      digital_io[12]
+     //Pin-15       PB1/SS[1]/OC1A(PWM3)      digital_io[12]
      if(cfg_pwm_enb[3])              digital_io_out[12]  = pwm_wfm[3];
+     else if(cfg_spim_enb[1])        digital_io_out[12]  = spim_ssn[1];
      else if(cfg_port_b_dir_sel[1])  digital_io_out[12]  = port_b_out[1];
 
-     //Pin-16       PB2/SS/OC1B(PWM4)   digital_io[13]
+     //Pin-16       PB2/SS[0]/OC1B(PWM4)   digital_io[13]
      if(cfg_pwm_enb[4])              digital_io_out[13]  = pwm_wfm[4];
-     else if(cfg_spim_enb)           digital_io_out[13]  = spim_ss;
+     else if(cfg_spim_enb[0])        digital_io_out[13]  = spim_ssn[0];
      else if(cfg_port_b_dir_sel[2])  digital_io_out[13]  = port_b_out[2];
 
      //Pin-17       PB3/MOSI/OC2A(PWM5) digital_io[14]
@@ -712,11 +720,11 @@
      else if(cfg_port_b_dir_sel[3])  digital_io_out[14]  = port_b_out[3];
 
      //Pin-18       PB4/MISO            digital_io[15]
-     if(cfg_spim_enb)                digital_io_out[15]  = spim_miso;
+     if(cfg_spim_enb[0])             digital_io_out[15]  = spim_miso;
      else if(cfg_port_b_dir_sel[4])  digital_io_out[15]  = port_b_out[4];
 
      //Pin-19       PB5/SCK             digital_io[16]
-     if(cfg_spim_enb)                digital_io_out[16]  = spim_sck;
+     if(cfg_spim_enb[0])             digital_io_out[16]  = spim_sck;
      else if(cfg_port_b_dir_sel[5])  digital_io_out[16]  = port_b_out[5];
      
      //Pin-23       PC0/ADC0            digital_io[18]/analog_io[11]
@@ -768,16 +776,17 @@
      //Pin-1        PC6/RESET*          digital_io[0]
      if(cfg_port_c_dir_sel[6])       digital_io_oen[0]   = 1'b0;
 
-     //Pin-2        PD0/RXD             digital_io[1]
-     if     (cfg_uart_enb)           digital_io_oen[1]   = 1'b1;
+     //Pin-2        PD0/RXD[0]          digital_io[1]
+     if     (cfg_uart_enb[0])        digital_io_oen[1]   = 1'b1;
      else if(cfg_port_d_dir_sel[0])  digital_io_oen[1]   = 1'b0;
 
-     //Pin-3        PD1/TXD             digital_io[2]
-     if     (cfg_uart_enb)           digital_io_oen[2]   = 1'b0;
+     //Pin-3        PD1/TXD[0]          digital_io[2]
+     if     (cfg_uart_enb[0])        digital_io_oen[2]   = 1'b0;
      else if(cfg_port_d_dir_sel[1])  digital_io_oen[2]   = 1'b0;
 
-    //Pin-4        PD2/INT0            digital_io[3]
-     if(cfg_int_enb[0])              digital_io_oen[3]   = 1'b1;
+    //Pin-4        PD2/RXD[1]/INT0      digital_io[3]
+     if   (cfg_uart_enb[1])          digital_io_oen[3]   = 1'b1;
+     else if(cfg_int_enb[0])         digital_io_oen[3]   = 1'b1;
      else if(cfg_port_d_dir_sel[2])  digital_io_oen[3]   = 1'b0;
 
      //Pin-5        PD3/INT1/OC2B(PWM0)  digital_io[4]
@@ -785,8 +794,9 @@
      else if(cfg_int_enb[1])         digital_io_oen[4]   = 1'b1;
      else if(cfg_port_d_dir_sel[3])  digital_io_oen[4]   = 1'b0;
 
-     //Pin-6        PD4                 digital_io[5]
-     if(cfg_port_d_dir_sel[4])       digital_io_oen[5]   = 1'b0;
+     //Pin-6        PD4/TXD[1]       digital_io[5]
+     if   (cfg_uart_enb[1])          digital_io_oen[5]   = 1'b0;
+     else if(cfg_port_d_dir_sel[4])  digital_io_oen[5]   = 1'b0;
 
      //Pin-9        PB6/XTAL1/TOSC1     digital_io[6]
      if(cfg_port_b_dir_sel[6])       digital_io_oen[6]   = 1'b0;
@@ -794,12 +804,14 @@
      // Pin-10       PB7/XTAL2/TOSC2     digital_io[7]
      if(cfg_port_b_dir_sel[7])       digital_io_oen[7]   = 1'b0;
 
-     //Pin-11       PD5/OC0B(PWM1)/T1   digital_io[8]
+     //Pin-11       PD5/SS[3]/OC0B(PWM1)/T1   digital_io[8]
      if(cfg_pwm_enb[1])              digital_io_oen[8]   = 1'b0;
+     else if(cfg_spim_enb[3])        digital_io_oen[8]   = 1'b0;
      else if(cfg_port_d_dir_sel[5])  digital_io_oen[8]   = 1'b0;
 
-     //Pin-12       PD6/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
+     //Pin-12       PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
      if(cfg_pwm_enb[2])              digital_io_oen[9]   = 1'b0;
+     else if(cfg_spim_enb[2])        digital_io_oen[9]   = 1'b0;
      else if(cfg_port_d_dir_sel[6])  digital_io_oen[9]   = 1'b0;
 
      //Pin-13       PD7/A1N1            digital_io[10]/analog_io[3]
@@ -808,26 +820,27 @@
      //Pin-14       PB0/CLKO/ICP1       digital_io[11]
      if(cfg_port_b_dir_sel[0])       digital_io_oen[11]  = 1'b0;
 
-     //Pin-15       PB1/OC1A(PWM3)      digital_io[12]
+     //Pin-15       PB1/SS[1]/OC1A(PWM3)      digital_io[12]
      if(cfg_pwm_enb[3])              digital_io_oen[12]  = 1'b0;
+     else if(cfg_spim_enb[1])        digital_io_oen[12]  = 1'b0;
      else if(cfg_port_b_dir_sel[1])  digital_io_oen[12]  = 1'b0;
 
-     //Pin-16       PB2/SS/OC1B(PWM4)   digital_io[13]
+     //Pin-16       PB2/SS[0]/OC1B(PWM4)   digital_io[13]
      if(cfg_pwm_enb[4])              digital_io_oen[13]  = 1'b0;
-     else if(cfg_spim_enb)           digital_io_oen[13]  = 1'b0;
+     else if(cfg_spim_enb[0])        digital_io_oen[13]  = 1'b0;
      else if(cfg_port_b_dir_sel[2])  digital_io_oen[13]  = 1'b0;
 
      //Pin-17       PB3/MOSI/OC2A(PWM5) digital_io[14]
-     if(cfg_spim_enb)                digital_io_oen[14]  = 1'b1;
+     if(cfg_spim_enb[0])                digital_io_oen[14]  = 1'b1;
      else if(cfg_pwm_enb[5])         digital_io_oen[14]  = 1'b0;
      else if(cfg_port_b_dir_sel[3])  digital_io_oen[14]  = 1'b0;
 
-     //Pin-18       PB4/MISO            digital_io[15]
-     if(cfg_spim_enb)                digital_io_oen[15]  = 1'b0;
+     //Pin-18       PB4/MISO         digital_io[15]
+     if(cfg_spim_enb[0])             digital_io_oen[15]  = 1'b0;
      else if(cfg_port_b_dir_sel[4])  digital_io_oen[15]  = 1'b0;
 
      //Pin-19       PB5/SCK             digital_io[16]
-     if(cfg_spim_enb)                digital_io_oen[16]  = 1'b0;
+     if(cfg_spim_enb[0])                digital_io_oen[16]  = 1'b0;
      else if(cfg_port_b_dir_sel[5])  digital_io_oen[16]  = 1'b0;
      
      //Pin-23       PC0/ADC0            digital_io[18]/analog_io[11]
diff --git a/verilog/rtl/pinmux/src/pinmux_reg.sv b/verilog/rtl/pinmux/src/pinmux_reg.sv
index 131207f..7966d8b 100644
--- a/verilog/rtl/pinmux/src/pinmux_reg.sv
+++ b/verilog/rtl/pinmux/src/pinmux_reg.sv
@@ -47,7 +47,7 @@
                        output logic            cpu_intf_rst_n   ,
                        output logic            qspim_rst_n      ,
                        output logic            sspim_rst_n      ,
-                       output logic            uart_rst_n       ,
+                       output logic  [1:0]     uart_rst_n       ,
                        output logic            i2cm_rst_n       ,
                        output logic            usb_rst_n        ,
 
@@ -281,9 +281,10 @@
 ctech_buf u_buf_cpu_intf_rst  (.A(cfg_glb_ctrl[0]),.X(cpu_intf_rst_n));
 ctech_buf u_buf_qspim_rst     (.A(cfg_glb_ctrl[1]),.X(qspim_rst_n));
 ctech_buf u_buf_sspim_rst     (.A(cfg_glb_ctrl[2]),.X(sspim_rst_n));
-ctech_buf u_buf_uart_rst      (.A(cfg_glb_ctrl[3]),.X(uart_rst_n));
+ctech_buf u_buf_uart0_rst     (.A(cfg_glb_ctrl[3]),.X(uart_rst_n[0]));
 ctech_buf u_buf_i2cm_rst      (.A(cfg_glb_ctrl[4]),.X(i2cm_rst_n));
 ctech_buf u_buf_usb_rst       (.A(cfg_glb_ctrl[5]),.X(usb_rst_n));
+ctech_buf u_buf_uart1_rst     (.A(cfg_glb_ctrl[6]),.X(uart_rst_n[1]));
 
 ctech_buf u_buf_cpu0_rst      (.A(cfg_glb_ctrl[8]),.X(cpu_core_rst_n[0]));
 ctech_buf u_buf_cpu1_rst      (.A(cfg_glb_ctrl[9]),.X(cpu_core_rst_n[1]));
@@ -715,7 +716,7 @@
 //-----------------------------------------
 // Software Reg-2, Release date: <DAY><MONTH><YEAR>
 // ----------------------------------------
-gen_32b_reg  #(32'h0104_2022) u_reg_23	(
+gen_32b_reg  #(32'h0604_2022) u_reg_23	(
 	      //List of Inputs
 	      .reset_n    (h_reset_n     ),
 	      .clk        (mclk          ),
@@ -728,9 +729,9 @@
 	      );
 
 //-----------------------------------------
-// Software Reg-3: Poject Revison 4.1 = 0004100
+// Software Reg-3: Poject Revison 4.1 = 0004200
 // ----------------------------------------
-gen_32b_reg  #(32'h0004_1000) u_reg_24	(
+gen_32b_reg  #(32'h0004_2000) u_reg_24	(
 	      //List of Inputs
 	      .reset_n    (h_reset_n     ),
 	      .clk        (mclk          ),
diff --git a/verilog/rtl/sspim/src/sspim_top.sv b/verilog/rtl/sspim/src/sspim_top.sv
index 8a632a0..2a28d2e 100755
--- a/verilog/rtl/sspim/src/sspim_top.sv
+++ b/verilog/rtl/sspim/src/sspim_top.sv
@@ -44,6 +44,8 @@
 ////            i.e byte transfer [7:0],[15:8] ...[31:24]         ////
 ////            Note: As per SPI transfer still first bit sent    ////
 ////            out is big endian, i.e bit[7],[6] ..[0]           ////
+////    0.3 - April 6, 2022, Dinesh A                             ////
+////            Four chip select are driven out                   ////
 ////                                                              ////
 //////////////////////////////////////////////////////////////////////
 ////                                                              ////
@@ -98,7 +100,7 @@
            output logic        sck           , // clock out
            output logic        so            , // serial data out
            input  logic        si            , // serial data in
-           output logic        ssn             // cs_n
+           output logic  [3:0] ssn             // Chip Select
 
            );
  
@@ -123,9 +125,7 @@
 logic  [31:0]        cfg_datain                    ; // data for transfer
 logic  [31:0]        cfg_dataout                   ; // data for received
 logic                hware_op_done                 ; // operation done
-logic [3:0]          cs_n                          ; // cs_n
 
-assign ssn =  cs_n[0]; // Only 1 chip select supported in riscdunio
 
 sspim_if  u_spi_if
           (
@@ -147,7 +147,7 @@
           . sck                         (sck                          ),
           . so                          (so                           ),
           . si                          (si                           ),
-          . cs_n                        (cs_n                         )
+          . cs_n                        (ssn                          )
            );
 
 
diff --git a/verilog/rtl/uart_i2c_usb_spi/src/uart_i2c_usb_spi.sv b/verilog/rtl/uart_i2c_usb_spi/src/uart_i2c_usb_spi.sv
index 028f1d7..d94013b 100644
--- a/verilog/rtl/uart_i2c_usb_spi/src/uart_i2c_usb_spi.sv
+++ b/verilog/rtl/uart_i2c_usb_spi/src/uart_i2c_usb_spi.sv
@@ -35,7 +35,8 @@
 ////      - Dinesh Annayya, dinesha@opencores.org                 ////
 ////                                                              ////
 ////  Revision :                                                  ////
-////                                                              ////
+////         0.2 - 7 April 2022, Dinesh-A                         ////
+////               2nd Uart Integrated                            ////
 //////////////////////////////////////////////////////////////////////
 ////                                                              ////
 //// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
@@ -75,17 +76,17 @@
    input logic	       wbd_clk_int,
    output logic	       wbd_clk_uart,
 
-   input logic         uart_rstn  , // async reset
-   input logic         i2c_rstn  ,  // async reset
-   input logic         usb_rstn  ,  // async reset
-   input logic         spi_rstn  ,  // async reset
-   input logic         app_clk ,
-   input logic         usb_clk ,   // 48Mhz usb clock
+   input logic  [1:0]  uart_rstn  , // async reset
+   input logic         i2c_rstn    ,  // async reset
+   input logic         usb_rstn    ,  // async reset
+   input logic         spi_rstn    ,  // async reset
+   input logic         app_clk     ,
+   input logic         usb_clk     ,   // 48Mhz usb clock
 
         // Reg Bus Interface Signal
    input logic         reg_cs,
    input logic         reg_wr,
-   input logic [7:0]   reg_addr,
+   input logic [8:0]   reg_addr,
    input logic [31:0]  reg_wdata,
    input logic [3:0]   reg_be,
 
@@ -106,8 +107,8 @@
    output logic        i2cm_intr_o            ,
 
    // UART I/F
-   input  logic        uart_rxd               , 
-   output logic        uart_txd               ,
+   input  logic  [1:0] uart_rxd               , 
+   output logic  [1:0] uart_txd               ,
 
    // USB 1.1 HOST I/F
    input  logic        usb_in_dp              ,
@@ -123,7 +124,7 @@
    output logic        sspim_sck, // clock out
    output logic        sspim_so,  // serial data out
    input  logic        sspim_si,  // serial data in
-   output logic        sspim_ssn  // cs_n
+   output logic [3:0]  sspim_ssn  // cs_n
 
      );
 
@@ -139,57 +140,84 @@
 	       .clk_out    (wbd_clk_uart                ) 
        );
 
-`define SEL_UART 2'b00
-`define SEL_I2C  2'b01
-`define SEL_USB  2'b10
-`define SEL_SPI  2'b11
+`define SEL_UART0 3'b000
+`define SEL_I2C   3'b001
+`define SEL_USB   3'b010
+`define SEL_SPI   3'b011
+`define SEL_UART1 3'b100
 
 
 
 //----------------------------------------
 //  Register Response Path Mux
 //  --------------------------------------
-logic [7:0]   reg_uart_rdata;
+logic [7:0]   reg_uart0_rdata;
+logic [7:0]   reg_uart1_rdata;
 logic [7:0]   reg_i2c_rdata;
 logic [31:0]  reg_usb_rdata;
 logic [31:0]  reg_spim_rdata;
-logic         reg_uart_ack;
+logic         reg_uart0_ack;
+logic         reg_uart1_ack;
 logic         reg_i2c_ack;
 logic         reg_usb_ack;
 logic         reg_spim_ack;
 
 
-assign reg_rdata = (reg_addr[7:6] == `SEL_UART) ? {24'h0,reg_uart_rdata} : 
-	           (reg_addr[7:6] == `SEL_I2C) ? {24'h0,reg_i2c_rdata} :
-	           (reg_addr[7:6] == `SEL_USB) ? reg_usb_rdata : reg_spim_rdata;
-assign reg_ack   = (reg_addr[7:6] == `SEL_UART) ? reg_uart_ack   : 
-	           (reg_addr[7:6] == `SEL_I2C) ? reg_i2c_ack   : 
-	           (reg_addr[7:6] == `SEL_USB) ? reg_usb_ack : reg_spim_ack;
+assign reg_rdata = (reg_addr[8:6] == `SEL_UART0) ? {24'h0,reg_uart0_rdata} : 
+	           (reg_addr[8:6] == `SEL_UART1) ? {24'h0,reg_uart1_rdata} :
+	           (reg_addr[8:6] == `SEL_I2C) ? {24'h0,reg_i2c_rdata} :
+	           (reg_addr[8:6] == `SEL_USB) ? reg_usb_rdata : reg_spim_rdata;
+assign reg_ack   = (reg_addr[8:6] == `SEL_UART0) ? reg_uart0_ack   : 
+	           (reg_addr[8:6] == `SEL_UART1) ? reg_uart1_ack   : 
+	           (reg_addr[8:6] == `SEL_I2C)   ? reg_i2c_ack     : 
+	           (reg_addr[8:6] == `SEL_USB)   ? reg_usb_ack     : reg_spim_ack;
 
-wire reg_uart_cs  = (reg_addr[7:6] == `SEL_UART) ? reg_cs : 1'b0;
-wire reg_i2cm_cs  = (reg_addr[7:6] == `SEL_I2C)  ? reg_cs : 1'b0;
-wire reg_usb_cs   = (reg_addr[7:6] == `SEL_USB)  ? reg_cs : 1'b0;
-wire reg_spim_cs  = (reg_addr[7:6] == `SEL_SPI)  ?  reg_cs : 1'b0;
+wire reg_uart0_cs  = (reg_addr[8:6] == `SEL_UART0) ? reg_cs : 1'b0;
+wire reg_uart1_cs  = (reg_addr[8:6] == `SEL_UART1) ? reg_cs : 1'b0;
+wire reg_i2cm_cs   = (reg_addr[8:6] == `SEL_I2C)   ? reg_cs : 1'b0;
+wire reg_usb_cs    = (reg_addr[8:6] == `SEL_USB)   ? reg_cs : 1'b0;
+wire reg_spim_cs   = (reg_addr[8:6] == `SEL_SPI)   ? reg_cs : 1'b0;
 
-uart_core  u_uart_core (  
+uart_core  u_uart0_core (  
 
-        .arst_n      (uart_rstn        ), // async reset
+        .arst_n      (uart_rstn[0]     ), // async reset
         .app_clk     (app_clk          ),
 
         // Reg Bus Interface Signal
-        .reg_cs      (reg_uart_cs      ),
+        .reg_cs      (reg_uart0_cs     ),
         .reg_wr      (reg_wr           ),
         .reg_addr    (reg_addr[5:2]    ),
         .reg_wdata   (reg_wdata[7:0]   ),
         .reg_be      (reg_be[0]        ),
 
         // Outputs
-        .reg_rdata   (reg_uart_rdata[7:0]),
-        .reg_ack     (reg_uart_ack     ),
+        .reg_rdata   (reg_uart0_rdata[7:0]),
+        .reg_ack     (reg_uart0_ack    ),
 
             // Pad Control
-        .rxd          (uart_rxd        ),
-        .txd          (uart_txd        )
+        .rxd          (uart_rxd[0]     ),
+        .txd          (uart_txd[0]     )
+     );
+
+uart_core  u_uart1_core (  
+
+        .arst_n      (uart_rstn[1]     ), // async reset
+        .app_clk     (app_clk          ),
+
+        // Reg Bus Interface Signal
+        .reg_cs      (reg_uart1_cs     ),
+        .reg_wr      (reg_wr           ),
+        .reg_addr    (reg_addr[5:2]    ),
+        .reg_wdata   (reg_wdata[7:0]   ),
+        .reg_be      (reg_be[0]        ),
+
+        // Outputs
+        .reg_rdata   (reg_uart1_rdata[7:0]),
+        .reg_ack     (reg_uart1_ack    ),
+
+            // Pad Control
+        .rxd          (uart_rxd[1]     ),
+        .txd          (uart_txd[1]     )
      );
 
 i2cm_top  u_i2cm (
diff --git a/verilog/rtl/user_project_wrapper.v b/verilog/rtl/user_project_wrapper.v
index 0c341d6..6e42c0d 100644
--- a/verilog/rtl/user_project_wrapper.v
+++ b/verilog/rtl/user_project_wrapper.v
@@ -198,6 +198,9 @@
 ////         4. caravel wb addressing issue restrict to 0x300FFFFF////
 ////    4.1  April 1 2022, Dinesh A                               ////
 ////         1. sram lanuch phase control added inside risc core  ////
+////    4.2  April 6 2022, Dinesh A                               ////
+////         1. SSPI CS# increased from 1 to 4                    ////
+////         2. uart port increase to two                         ////
 //////////////////////////////////////////////////////////////////////
 ////                                                              ////
 //// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
@@ -410,7 +413,7 @@
 //    Global Register Wishbone Interface
 //---------------------------------------------------------------------
 wire                           wbd_uart_stb_o                         ; // strobe/request
-wire   [7:0]                   wbd_uart_adr_o                         ; // address
+wire   [8:0]                   wbd_uart_adr_o                         ; // address
 wire                           wbd_uart_we_o                          ; // write
 wire   [31:0]                  wbd_uart_dat_o                         ; // data output
 wire   [3:0]                   wbd_uart_sel_o                         ; // byte enable
@@ -427,7 +430,7 @@
 wire  [1:0]                    cpu_core_rst_n                         ;
 wire                           qspim_rst_n                            ;
 wire                           sspim_rst_n                            ;
-wire                           uart_rst_n                             ; // uart reset
+wire [1:0]                     uart_rst_n                             ; // uart reset
 wire                           i2c_rst_n                              ; // i2c reset
 wire                           usb_rst_n                              ; // i2c reset
 wire                           bist_rst_n                             ; // i2c reset
@@ -509,8 +512,8 @@
 wire                           usb_dn_i                               ;
 
 // UART I/F
-wire                           uart_txd                               ;
-wire                           uart_rxd                               ;
+wire       [1:0]               uart_txd                               ;
+wire       [1:0]               uart_rxd                               ;
 
 // I2CM I/F
 wire                           i2cm_clk_o                             ;
@@ -568,7 +571,7 @@
 wire                           sspim_sck                              ; // clock out
 wire                           sspim_so                               ; // serial data out
 wire                           sspim_si                               ; // serial data in
-wire                           sspim_ssn                              ; // cs_n
+wire    [3:0]                  sspim_ssn                              ; // cs_n
 
 
 wire                           usb_intr_o                             ;
@@ -1099,7 +1102,7 @@
         // Reg Bus Interface Signal
           .reg_cs                  (wbd_uart_stb_o          ),
           .reg_wr                  (wbd_uart_we_o           ),
-          .reg_addr                (wbd_uart_adr_o[7:0]     ),
+          .reg_addr                (wbd_uart_adr_o[8:0]     ),
           .reg_wdata               (wbd_uart_dat_o          ),
           .reg_be                  (wbd_uart_sel_o          ),
 
@@ -1217,7 +1220,7 @@
 
        // SPI MASTER
           .spim_sck                (sspim_sck               ),
-          .spim_ss                 (sspim_ssn               ),
+          .spim_ssn                (sspim_ssn               ),
           .spim_miso               (sspim_so                ),
           .spim_mosi               (sspim_si                ),
 
diff --git a/verilog/rtl/user_reg_map.v b/verilog/rtl/user_reg_map.v
index 1926c76..dfe3a99 100644
--- a/verilog/rtl/user_reg_map.v
+++ b/verilog/rtl/user_reg_map.v
@@ -3,10 +3,11 @@
 // So, using wb_host bank select we have changing MSB address [31:16] = 0x1000
 //
 `define ADDR_SPACE_QSPI    32'h3000_0000
-`define ADDR_SPACE_UART    32'h3001_0000
+`define ADDR_SPACE_UART0   32'h3001_0000
 `define ADDR_SPACE_I2CM    32'h3001_0040
 `define ADDR_SPACE_USB     32'h3001_0080
 `define ADDR_SPACE_SSPI    32'h3001_00C0
+`define ADDR_SPACE_UART1   32'h3001_0100
 `define ADDR_SPACE_PINMUX  32'h3002_0000
 `define ADDR_SPACE_WBHOST  32'h3008_0000
 
diff --git a/verilog/rtl/wb_interconnect/src/wb_interconnect.sv b/verilog/rtl/wb_interconnect/src/wb_interconnect.sv
index fd68e08..8ab9487 100644
--- a/verilog/rtl/wb_interconnect/src/wb_interconnect.sv
+++ b/verilog/rtl/wb_interconnect/src/wb_interconnect.sv
@@ -190,7 +190,7 @@
          input	logic 	        s1_wbd_ack_i,
          // input	logic 	s1_wbd_err_i, - unused
          output	logic [31:0]	s1_wbd_dat_o,
-         output	logic [7:0]	s1_wbd_adr_o,
+         output	logic [8:0]	s1_wbd_adr_o, // Uart
          output	logic [3:0]	s1_wbd_sel_o,
          output	logic 	        s1_wbd_we_o,
          output	logic 	        s1_wbd_cyc_o,
@@ -299,6 +299,7 @@
 // 0x1001_0080 to 0x1001_00BF  - USB
 // 0x1001_00C0 to 0x1001_00FF  - SSPIM
 // 0x1002_0000 to 0x1002_00FF  - PINMUX
+// 0x1001_0100 to 0x1001_013F  - UART1
 // 0x3080_0000 to 0x3080_00FF  - WB HOST (This decoding happens at wb_host block)
 // ---------------------------------------------------------------------------
 //
@@ -312,10 +313,11 @@
 // RISC Data Memory Map
 // 0x0000_0000 to 0x0FFF_FFFF  - QSPIM MEMORY
 // 0x1000_0000 to 0x1000_00FF  - QSPIM REG
-// 0x1001_0000 to 0x1001_003F  - UART
+// 0x1001_0000 to 0x1001_003F  - UART0
 // 0x1001_0040 to 0x1001_007F  - I2
 // 0x1001_0080 to 0x1001_00BF  - USB
 // 0x1001_00C0 to 0x1001_00FF  - SSPIM
+// 0x1001_0100 to 0x1001_013F  - UART1
 // 0x1002_0000 to 0x1002_00FF  - PINMUX
 //-----------------------------
 // 
@@ -660,7 +662,7 @@
  assign  s0_wbd_stb_o =  s0_wb_wr.wbd_stb ;
                       
  assign  s1_wbd_dat_o =  s1_wb_wr.wbd_dat ;
- assign  s1_wbd_adr_o =  s1_wb_wr.wbd_adr[7:0] ;
+ assign  s1_wbd_adr_o =  s1_wb_wr.wbd_adr[8:0] ;
  assign  s1_wbd_sel_o =  s1_wb_wr.wbd_sel ;
  assign  s1_wbd_we_o  =  s1_wb_wr.wbd_we  ;
  assign  s1_wbd_cyc_o =  s1_wb_wr.wbd_cyc ;