blob: c5eec94d3704fa54017b178e1fe322de60ce8de0 [file] [log] [blame]
### Caravel Signoff SDC
### Rev 3
### Date: 28/10/2022
### Reference SDC: $CARAVEL_ROOT/signoff/caravel/caravel.sdc
## MASTER CLOCKS
## Reduce the clock speed from 25ns 40ns
create_clock -name clk -period 40 [get_ports {clock}]
create_clock -name hkspi_clk -period 100 [get_pins {housekeeping/mgmt_gpio_in[4]} ]
create_clock -name hk_serial_clk -period 50 [get_pins {housekeeping/serial_clock}]
create_clock -name hk_serial_load -period 1000 [get_pins {housekeeping/serial_load}]
# hk_serial_clk period is x2 core clock
### User Project Clocks
create_generated_clock -name wb_clk -add -source [get_ports {clock}] -master_clock [get_clocks clk] -divide_by 1 -comment {Wishbone User Clock} [get_pins mprj/wb_clk_i]
create_clock -name int_pll_clock -period 5.0000 [get_pins {mprj/u_pinmux/int_pll_clock}]
create_clock -name wbs_ref_clk -period 5.0000 [get_pins {mprj/u_wb_host/u_reg.u_wbs_ref_clkbuf.u_buf/X}]
create_clock -name wbs_clk_i -period 30.0000 [get_pins {mprj/u_wb_host/wbs_clk_out}]
create_clock -name cpu_ref_clk -period 5.0000 [get_pins {mprj/u_wb_host/u_reg.u_cpu_ref_clkbuf.u_buf/X}]
create_clock -name cpu_clk -period 40.0000 [get_pins {mprj/u_wb_host/cpu_clk}]
create_clock -name rtc_ref_clk -period 50.0000 [get_pins {mprj/u_pinmux/u_glbl_reg.u_rtc_ref_clkbuf.u_buf/X}]
create_clock -name rtc_clk -period 50.0000 [get_pins {mprj/u_pinmux/u_glbl_reg.u_clkbuf_rtc.u_buf/X}]
create_clock -name pll_ref_clk -period 20.0000 [get_pins {mprj/u_pinmux/pll_ref_clk}]
create_clock -name pll_clk_0 -period 12.0000 [get_pins {mprj/u_pll/ringosc.ibufp01/Y}]
create_clock -name usb_ref_clk -period 6.0000 [get_pins {mprj/u_pinmux/u_glbl_reg.u_usb_ref_clkbuf.u_buf/X}]
create_clock -name usb_clk -period 20.0000 [get_pins {mprj/u_pinmux/u_glbl_reg.u_clkbuf_usb.u_buf/X}]
create_clock -name uarts0_clk -period 100.0000 [get_pins {mprj/u_uart_i2c_usb_spi/u_uart0_core.u_lineclk_buf.genblk1.u_mux/X}]
create_clock -name uarts1_clk -period 100.0000 [get_pins {mprj/u_uart_i2c_usb_spi/u_uart1_core.u_lineclk_buf.genblk1.u_mux/X}]
create_clock -name uartm_clk -period 100.0000 [get_pins {mprj/u_wb_host/u_uart2wb.u_core.u_uart_clk.genblk1.u_mux/X}]
create_clock -name dbg_ref_clk -period 12.0000 [get_pins {mprj/u_pinmux/u_glbl_reg.u_clkbuf_dbg_ref.u_buf/X}]
set_clock_uncertainty 0.1000 [all_clocks]
set_clock_groups \
-name clock_group \
-logically_exclusive \
-group [get_clocks {wb_clk clk}]\
-group [get_clocks {hk_serial_clk}]\
-group [get_clocks {hk_serial_load}]\
-group [get_clocks {hkspi_clk}]\
-group [get_clocks {int_pll_clock}]\
-group [get_clocks {wbs_clk_i}]\
-group [get_clocks {wbs_ref_clk}]\
-group [get_clocks {cpu_clk}]\
-group [get_clocks {cpu_ref_clk}]\
-group [get_clocks {rtc_clk}]\
-group [get_clocks {usb_ref_clk}]\
-group [get_clocks {pll_ref_clk}]\
-group [get_clocks {pll_clk_0}]\
-group [get_clocks {usb_clk}]\
-group [get_clocks {uarts0_clk}]\
-group [get_clocks {uarts1_clk}]\
-group [get_clocks {uartm_clk}]\
-group [get_clocks {dbg_ref_clk}]\
-group [get_clocks {rtc_ref_clk}]\
-comment {Async Clock group}
# clock <-> hk_serial_clk/load no paths
# future note: CDC stuff
# clock <-> hkspi_clk no paths with careful methods (clock is off)
set_propagated_clock [all_clocks]
## INPUT/OUTPUT DELAYS
set input_delay_value 4
set output_delay_value 4
puts "\[INFO\]: Setting output delay to: $output_delay_value"
puts "\[INFO\]: Setting input delay to: $input_delay_value"
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {gpio}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[0]}]
#set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[1]}]
set_input_delay $input_delay_value -clock [get_clocks {hkspi_clk}] -add_delay [get_ports {mprj_io[2]}]
set_input_delay $input_delay_value -clock [get_clocks {hkspi_clk}] -add_delay [get_ports {mprj_io[3]}]
#set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[4]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[5]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[6]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[7]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[8]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[9]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[10]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[11]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[12]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[13]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[14]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[15]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[16]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[17]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[18]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[19]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[20]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[21]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[22]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[23]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[24]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[25]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[26]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[27]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[28]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[29]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[30]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[31]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[32]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[33]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[34]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[35]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[36]}]
set_input_delay $input_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {mprj_io[37]}]
set_output_delay $output_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {flash_csb}]
set_output_delay $output_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {flash_clk}]
set_output_delay $output_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {flash_io0}]
set_output_delay $output_delay_value -clock [get_clocks {clk}] -add_delay [get_ports {flash_io1}]
# set_output_delay $output_delay_value -clock [get_clocks {hkspi_clk}] -add_delay [get_ports {mprj_io[1]}]
set_max_fanout 12 [current_design]
# synthesis max fanout should be less than 12 (7 maybe)
## Set system monitoring mux select to zero so that the clock/user_clk monitoring is disabled
set_case_analysis 0 [get_pins housekeeping/_3936_/S]
set_case_analysis 0 [get_pins housekeeping/_3937_/S]
# Add case analysis for pads DM[2]==1'b1 & DM[1]==1'b1 & DM[0]==1'b0 to be outputs
set_case_analysis 1 [get_pins padframe/*_pad*/DM[2]]
set_case_analysis 1 [get_pins padframe/*_pad*/DM[1]]
set_case_analysis 0 [get_pins padframe/*_pad*/DM[0]]
set_case_analysis 0 [get_pins padframe/*_pad*/SLOW]
set_case_analysis 0 [get_pins padframe/*_pad*/ANALOG_EN]
# the following pads are set as inputs
set_case_analysis 0 [get_pins padframe/*area1_io_pad[4]/DM[2]]
set_case_analysis 0 [get_pins padframe/*area1_io_pad[4]/DM[1]]
set_case_analysis 1 [get_pins padframe/*area1_io_pad[4]/DM[0]]
set_case_analysis 0 [get_pins padframe/*area1_io_pad[2]/DM[2]]
set_case_analysis 0 [get_pins padframe/*area1_io_pad[2]/DM[1]]
set_case_analysis 1 [get_pins padframe/*area1_io_pad[2]/DM[0]]
set_case_analysis 0 [get_pins padframe/clock_pad/DM[2]]
set_case_analysis 0 [get_pins padframe/clock_pad/DM[1]]
set_case_analysis 1 [get_pins padframe/clock_pad/DM[0]]
#################################################################
## User Case analysis
#################################################################
set_case_analysis 0 [get_pins {mprj/u_peri/cfg_cska_peri[3]}]
set_case_analysis 1 [get_pins {mprj/u_peri/cfg_cska_peri[2]}]
set_case_analysis 0 [get_pins {mprj/u_peri/cfg_cska_peri[1]}]
set_case_analysis 0 [get_pins {mprj/u_peri/cfg_cska_peri[0]}]
set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[3]}]
set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[2]}]
set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[1]}]
set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[0]}]
set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[3]}]
set_case_analysis 1 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[2]}]
set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[1]}]
set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[0]}]
set_case_analysis 0 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[3]}]
set_case_analysis 1 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[2]}]
set_case_analysis 1 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[1]}]
set_case_analysis 1 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[0]}]
set_case_analysis 1 [get_pins {mprj/u_qspi_master/cfg_cska_spi[3]}]
set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_spi[2]}]
set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_spi[1]}]
set_case_analysis 1 [get_pins {mprj/u_qspi_master/cfg_cska_spi[0]}]
set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_wcska[3]}]
set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_wcska[2]}]
set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_wcska[1]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_wcska[0]}]
set_case_analysis 1 [get_pins {mprj/u_wb_host/cfg_cska_wh[3]}]
set_case_analysis 0 [get_pins {mprj/u_wb_host/cfg_cska_wh[2]}]
set_case_analysis 0 [get_pins {mprj/u_wb_host/cfg_cska_wh[1]}]
set_case_analysis 0 [get_pins {mprj/u_wb_host/cfg_cska_wh[0]}]
set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[3]}]
set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[2]}]
set_case_analysis 1 [get_pins {mprj/u_intercon/cfg_cska_wi[0]}]
set_case_analysis 1 [get_pins {mprj/u_intercon/cfg_cska_wi[1]}]
# clock skew cntrl-2
set_case_analysis 0 [get_pins {mprj/u_fpu/cfg_cska[3]}]
set_case_analysis 1 [get_pins {mprj/u_fpu/cfg_cska[2]}]
set_case_analysis 1 [get_pins {mprj/u_fpu/cfg_cska[1]}]
set_case_analysis 1 [get_pins {mprj/u_fpu/cfg_cska[0]}]
set_case_analysis 1 [get_pins {mprj/u_aes/cfg_cska[3]}]
set_case_analysis 0 [get_pins {mprj/u_aes/cfg_cska[2]}]
set_case_analysis 0 [get_pins {mprj/u_aes/cfg_cska[1]}]
set_case_analysis 0 [get_pins {mprj/u_aes/cfg_cska[0]}]
#set_case_analysis 1 [get_pins {mprj/u_riscv_top.i_core_top_3/cfg_ccska[3]}]
#set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_3/cfg_ccska[2]}]
#set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_3/cfg_ccska[1]}]
#set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_3/cfg_ccska[0]}]
#set_case_analysis 1 [get_pins {mprj/u_riscv_top.i_core_top_2/cfg_ccska[3]}]
#set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_2/cfg_ccska[2]}]
#set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_2/cfg_ccska[1]}]
#set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_2/cfg_ccska[0]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_1/cfg_ccska[3]}]
set_case_analysis 1 [get_pins {mprj/u_riscv_top.i_core_top_1/cfg_ccska[2]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_1/cfg_ccska[1]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_1/cfg_ccska[0]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_0/cfg_ccska[3]}]
set_case_analysis 1 [get_pins {mprj/u_riscv_top.i_core_top_0/cfg_ccska[2]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_0/cfg_ccska[1]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.i_core_top_0/cfg_ccska[0]}]
set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_connect/cfg_ccska[3]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_connect/cfg_ccska[2]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_connect/cfg_ccska[1]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_connect/cfg_ccska[0]}]
set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_ccska[3]}]
set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_ccska[2]}]
set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_ccska[1]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_ccska[0]}]
#Keept the SRAM clock driving edge at pos edge
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_sram_lphase[0]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_sram_lphase[1]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_connect/cfg_sram_lphase[0]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_connect/cfg_sram_lphase[1]}]
## FALSE PATHS (ASYNCHRONOUS INPUTS)
set_false_path -from [get_ports {resetb}]
## Async USB/I2C Interrupt, Double Sync added inside glbl block
set_false_path -through [get_pins {mprj/u_pinmux/usb_intr}]
set_false_path -through [get_pins {mprj/u_pinmux/i2cm_intr}]
## UART RXD is async signal
set_false_path -through [get_pins {mprj/u_wb_host/uartm_rxd}]
##SPI Slave Interface Signal (SCLK/SSN) are double sync with wb_clk
set_false_path -through [get_pins {mprj/u_wb_host/sclk}]
set_false_path -through [get_pins {mprj/u_wb_host/ssn}]
## SDIN sampled on negedge SCLK
set_false_path -through [get_pins {mprj/u_wb_host/sdin}]
# set_false_path -from [get_ports mprj_io[*]] -through [get_pins housekeeping/mgmt_gpio_in[*]]
# reset_path -from [get_ports mprj_io[4]]
# reset_path -from [get_ports mprj_io[2]]
#reset_path is not supported in PT read_sdc ^
set_false_path -from [get_ports mprj_io[0]] -through [get_pins housekeeping/mgmt_gpio_in[0]]
set_false_path -from [get_ports mprj_io[1]] -through [get_pins housekeeping/mgmt_gpio_in[1]]
set_false_path -from [get_ports mprj_io[3]] -through [get_pins housekeeping/mgmt_gpio_in[3]]
set_false_path -from [get_ports mprj_io[5]] -through [get_pins housekeeping/mgmt_gpio_in[5]]
set_false_path -from [get_ports mprj_io[6]] -through [get_pins housekeeping/mgmt_gpio_in[6]]
set_false_path -from [get_ports mprj_io[7]] -through [get_pins housekeeping/mgmt_gpio_in[7]]
set_false_path -from [get_ports mprj_io[8]] -through [get_pins housekeeping/mgmt_gpio_in[8]]
set_false_path -from [get_ports mprj_io[9]] -through [get_pins housekeeping/mgmt_gpio_in[9]]
set_false_path -from [get_ports mprj_io[10]] -through [get_pins housekeeping/mgmt_gpio_in[10]]
set_false_path -from [get_ports mprj_io[11]] -through [get_pins housekeeping/mgmt_gpio_in[11]]
set_false_path -from [get_ports mprj_io[12]] -through [get_pins housekeeping/mgmt_gpio_in[12]]
set_false_path -from [get_ports mprj_io[13]] -through [get_pins housekeeping/mgmt_gpio_in[13]]
set_false_path -from [get_ports mprj_io[14]] -through [get_pins housekeeping/mgmt_gpio_in[14]]
set_false_path -from [get_ports mprj_io[15]] -through [get_pins housekeeping/mgmt_gpio_in[15]]
set_false_path -from [get_ports mprj_io[16]] -through [get_pins housekeeping/mgmt_gpio_in[16]]
set_false_path -from [get_ports mprj_io[17]] -through [get_pins housekeeping/mgmt_gpio_in[17]]
set_false_path -from [get_ports mprj_io[18]] -through [get_pins housekeeping/mgmt_gpio_in[18]]
set_false_path -from [get_ports mprj_io[19]] -through [get_pins housekeeping/mgmt_gpio_in[19]]
set_false_path -from [get_ports mprj_io[20]] -through [get_pins housekeeping/mgmt_gpio_in[20]]
set_false_path -from [get_ports mprj_io[21]] -through [get_pins housekeeping/mgmt_gpio_in[21]]
set_false_path -from [get_ports mprj_io[22]] -through [get_pins housekeeping/mgmt_gpio_in[22]]
set_false_path -from [get_ports mprj_io[23]] -through [get_pins housekeeping/mgmt_gpio_in[23]]
set_false_path -from [get_ports mprj_io[24]] -through [get_pins housekeeping/mgmt_gpio_in[24]]
set_false_path -from [get_ports mprj_io[25]] -through [get_pins housekeeping/mgmt_gpio_in[25]]
set_false_path -from [get_ports mprj_io[26]] -through [get_pins housekeeping/mgmt_gpio_in[26]]
set_false_path -from [get_ports mprj_io[27]] -through [get_pins housekeeping/mgmt_gpio_in[27]]
set_false_path -from [get_ports mprj_io[28]] -through [get_pins housekeeping/mgmt_gpio_in[28]]
set_false_path -from [get_ports mprj_io[29]] -through [get_pins housekeeping/mgmt_gpio_in[29]]
set_false_path -from [get_ports mprj_io[30]] -through [get_pins housekeeping/mgmt_gpio_in[30]]
set_false_path -from [get_ports mprj_io[31]] -through [get_pins housekeeping/mgmt_gpio_in[31]]
set_false_path -from [get_ports mprj_io[32]] -through [get_pins housekeeping/mgmt_gpio_in[32]]
set_false_path -from [get_ports mprj_io[33]] -through [get_pins housekeeping/mgmt_gpio_in[33]]
set_false_path -from [get_ports mprj_io[34]] -through [get_pins housekeeping/mgmt_gpio_in[34]]
set_false_path -from [get_ports mprj_io[35]] -through [get_pins housekeeping/mgmt_gpio_in[35]]
set_false_path -from [get_ports mprj_io[36]] -through [get_pins housekeeping/mgmt_gpio_in[36]]
set_false_path -from [get_ports mprj_io[37]] -through [get_pins housekeeping/mgmt_gpio_in[37]]
set_false_path -from [get_ports mprj_io[*]] -through [get_pins housekeeping/mgmt_gpio_out[*]]
set_false_path -from [get_ports mprj_io[*]] -through [get_pins housekeeping/mgmt_gpio_oeb[*]]
set_false_path -from [get_ports gpio]
#### LA Input to wb_host are false path
set_false_path -through [get_pins mprj/u_wb_host/la_data_in[*] ]
### These reset has reset synchronozation
set_false_path -through [get_pins mprj/u_uart_i2c_usb_spi/i2c_rstn ]
set_false_path -through [get_pins mprj/u_uart_i2c_usb_spi/spi_rstn ]
set_false_path -through [get_pins mprj/u_uart_i2c_usb_spi/usb_rstn ]
set_false_path -through [get_pins mprj/u_uart_i2c_usb_spi/uart_rstn[*] ]
# add loads for output ports (pads)
set min_cap 5
set max_cap 10
puts "\[INFO\]: Cap load range: $min_cap : $max_cap"
# set_load 10 [all_outputs]
set_load -min $min_cap [all_outputs]
set_load -max $max_cap [all_outputs]
#add input transition for the inputs ports (pads)
# set_input_transition 2 [all_inputs]
#add exception for power pads as 2ns on them results in max_tran violations (false viol)
# set_input_transition 2 [remove_from_collection [all_inputs] [get_ports v*]]
# remove_from_collection is not supported in PT read_sdc ^
# set_input_transition 2 [all_inputs]
# set_input_transition 0 [get_ports v*]
set min_in_tran 1
set max_in_tran 4
puts "\[INFO\]: Input transition range: $min_in_tran : $max_in_tran"
set_input_transition -min $min_in_tran [all_inputs]
set_input_transition -min 0 [get_ports v*]
set_input_transition -max $max_in_tran [all_inputs]
set_input_transition -max 0 [get_ports v*]
# check ocv table (not provided) -- maybe try 8%
set derate 0.0375
puts "\[INFO\]: Setting derate factor to: [expr $derate * 100] %"
set_timing_derate -early [expr 1-$derate]
set_timing_derate -late [expr 1+$derate]
# add max_tran constraint as the default max_tran of the ss hd SCL is 10 so the violations are not caught in ss corners
# apply the constraint to hd cells at the ss corner only
# if {$::env(PROC_CORNER) == "s"} {
# set max_tran 1.5
# set_max_transition $max_tran [get_pins -of_objects [get_cells -filter {ref_name=~sky130_fd_sc_hd*}]]
# set_max_transition $max_tran [get_pins -of_objects [get_cells */* -filter {ref_name=~sky130_fd_sc_hd*}]]
# set_max_transition $max_tran [get_pins -of_objects [get_cells */*/* -filter {ref_name=~sky130_fd_sc_hd*}]]
# puts "\[INFO\]: Setting maximum transition of HD cells in slow process corner to: $max_tran"
# }
# -filter not supported in PT read_sdc ^