sta/sdc/uart_i2c_usb_spi_top.sdc

###############################################################################
# Created by write_sdc
# Wed Nov 10 17:08:57 2021
###############################################################################
current_design uart_i2c_usb_spi_top
###############################################################################
# Timing Constraints
###############################################################################
create_clock -name app_clk -period 10.0000 [get_ports {app_clk}]
create_clock -name uart0_baud_clk -period 100.0000 [get_pins {u_uart0_core.u_lineclk_buf.u_mux/X}]
create_clock -name uart1_baud_clk -period 100.0000 [get_pins {u_uart1_core.u_lineclk_buf.u_mux/X}]
create_clock -name usb_clk -period 100.0000 [get_ports {usb_clk}]

set_clock_transition 0.1500 [all_clocks]
set_clock_uncertainty -setup 0.2500 [all_clocks]
set_clock_uncertainty -hold 0.2500 [all_clocks]



set_clock_groups -name async_clock -asynchronous \
 -group [get_clocks {app_clk}]\
 -group [get_clocks {usb_clk}]\
 -group [get_clocks {uart0_baud_clk}]\
 -group [get_clocks {uart1_baud_clk}] -comment {Async Clock group}

### ClkSkew Adjust
set_case_analysis 0 [get_ports {cfg_cska_uart[0]}]
set_case_analysis 0 [get_ports {cfg_cska_uart[1]}]
set_case_analysis 0 [get_ports {cfg_cska_uart[2]}]
set_case_analysis 0 [get_ports {cfg_cska_uart[3]}]


set_max_delay 5 -from [get_ports {wbd_clk_int}]
set_max_delay 5 -to   [get_ports {wbd_clk_uart}]
set_max_delay 5 -from wbd_clk_int -to wbd_clk_uart


set_input_delay -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {i2c_rstn}]
set_input_delay -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {uart_rstn}]
set_input_delay -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {usb_rstn}]

set_input_delay -min 1.5000 -clock [get_clocks {app_clk}] -add_delay [get_ports {i2c_rstn}]
set_input_delay -min 1.5000 -clock [get_clocks {app_clk}] -add_delay [get_ports {uart_rstn}]
set_input_delay -min 1.5000 -clock [get_clocks {app_clk}] -add_delay [get_ports {usb_rstn}]


set_input_delay  -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_addr[*]}]
set_input_delay  -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_be[*]}]
set_input_delay  -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_cs}]
set_input_delay  -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_wdata[*]}]
set_input_delay  -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_wr}]

set_input_delay  -min 2.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_addr[*]}]
set_input_delay  -min 2.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_be[*]}]
set_input_delay  -min 2.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_cs}]
set_input_delay  -min 2.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_wdata[*]}]
set_input_delay  -min 2.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_wr}]


set_output_delay -max 1.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_ack}]
set_output_delay -max 1.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_rdata[*]}]

set_output_delay -min -2.7500 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_ack}]
set_output_delay -min -2.7500 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_rdata[*]}]

set_multicycle_path -setup  -from [get_ports {reg_addr[*]}] -to [get_ports {reg_ack}] 2
set_multicycle_path -setup  -from [get_ports {reg_addr[*]}] -to [get_ports {reg_rdata[*]}] 2

set_multicycle_path -hold  -from [get_ports {reg_addr[*]}] -to [get_ports {reg_ack}] 1
set_multicycle_path -hold  -from [get_ports {reg_addr[*]}] -to [get_ports {reg_rdata[*]}] 1

###############################################################################
# Environment
###############################################################################
set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} [all_inputs]
set cap_load 0.0334
puts "\[INFO\]: Setting load to: $cap_load"
set_load  $cap_load [all_outputs]

set ::env(SYNTH_TIMING_DERATE) 0.05
puts "\[INFO\]: Setting timing derate to: [expr {$::env(SYNTH_TIMING_DERATE) * 10}] %"
set_timing_derate -early [expr {1-$::env(SYNTH_TIMING_DERATE)}]
set_timing_derate -late [expr {1+$::env(SYNTH_TIMING_DERATE)}]

###############################################################################
# Design Rules
###############################################################################