| |
| // Note in caravel, 0x300X_XXXX only come to user interface |
| // So, using wb_host bank select we have changing MSB address [31:16] = 0x1000 |
| // |
| `define ADDR_SPACE_QSPI 32'h3000_0000 |
| `define ADDR_SPACE_UART0 32'h3001_0000 |
| `define ADDR_SPACE_I2CM 32'h3001_0040 |
| `define ADDR_SPACE_USB 32'h3001_0080 |
| `define ADDR_SPACE_SSPI 32'h3001_00C0 |
| `define ADDR_SPACE_UART1 32'h3001_0100 |
| `define ADDR_SPACE_PINMUX 32'h3002_0000 |
| `define ADDR_SPACE_GLBL 32'h3002_0000 |
| `define ADDR_SPACE_GPIO 32'h3002_0080 |
| `define ADDR_SPACE_PWM 32'h3002_0100 |
| `define ADDR_SPACE_TIMER 32'h3002_0180 |
| `define ADDR_SPACE_SEMA 32'h3002_0200 |
| `define ADDR_SPACE_WS281X 32'h3002_0280 |
| `define ADDR_SPACE_ANALOG 32'h3002_0300 |
| `define ADDR_SPACE_WBHOST 32'h3008_0000 |
| |
| //-------------------------------------------------- |
| // WB Host Register |
| //-------------------------------------------------- |
| `define WBHOST_GLBL_CFG 8'h00 // reg_0 - Global Config |
| `define WBHOST_BANK_SEL 8'h04 // reg_1 - Bank Select |
| `define WBHOST_CLK_CTRL1 8'h08 // reg_2 - Clock Control-1 |
| `define WBHOST_CLK_CTRL2 8'h0C // reg_3 - Clock Control-2 |
| |
| //-------------------------------------------------- |
| // GLOBAL Register |
| // ------------------------------------------------- |
| `define GLBL_CFG_CHIP_ID 8'h00 // reg_0 - Chip ID |
| `define GLBL_CFG_CFG0 8'h04 // reg_1 - Global Config-0 |
| `define GLBL_CFG_CFG1 8'h08 // reg_2 - Global Config-1 |
| `define GLBL_CFG_INTR_MSK 8'h0C // reg_3 - Global Interrupt Mask |
| `define GLBL_CFG_INTR_STAT 8'h10 // reg_4 - Global Interrupt |
| `define GLBL_CFG_MUTI_FUNC 8'h14 // reg_5 - Multi functional sel |
| `define GLBL_CFG_CLK_CTRL 8'h18 // reg_6 - RTC/USB CLK CTRL |
| `define GLBL_CFG_PLL_CTRL1 8'h1C // reg_7 - PLL Control-1 |
| `define GLBL_CFG_PLL_CTRL2 8'h20 // reg_8 - PLL Control-2 |
| `define GLBL_CFG_PAD_STRAP 8'h30 // Strap as seen in Pad |
| `define GLBL_CFG_STRAP_STICKY 8'h34 // Sticky Strap used in next soft boot |
| `define GLBL_CFG_SYSTEM_STRAP 8'h38 // Current System Strap |
| `define GLBL_CFG_MAIL_BOX 8'h3C // reg_15 - Mail Box |
| `define GLBL_CFG_SOFT_REG_0 8'h40 // reg_16 - Sof Register |
| `define GLBL_CFG_SOFT_REG_1 8'h44 // reg_17 - Sof Register |
| `define GLBL_CFG_SOFT_REG_2 8'h48 // reg_18 - Sof Register |
| `define GLBL_CFG_SOFT_REG_3 8'h4C // reg_19 - Sof Register |
| `define GLBL_CFG_SOFT_REG_4 8'h50 // reg_20 - Sof Register |
| `define GLBL_CFG_SOFT_REG_5 8'h54 // reg_21 - Sof Register |
| `define GLBL_CFG_SOFT_REG_6 8'h58 // reg_22 - Sof Register |
| `define GLBL_CFG_SOFT_REG_7 8'h5C // reg_23 - Sof Register |
| |
| //-------------------------------------------------- |
| // GPIO Register |
| // ------------------------------------------------- |
| `define GPIO_CFG_DSEL 8'h00 // reg_0 - GPIO Direction Select |
| `define GPIO_CFG_TYPE 8'h04 // reg_1 - GPIO TYPE - Static/Waveform |
| `define GPIO_CFG_IDATA 8'h08 // reg_2 - GPIO Data In |
| `define GPIO_CFG_ODATA 8'h0C // reg_3 - GPIO Data Out |
| `define GPIO_CFG_INTR_STAT 8'h10 // reg_4 - GPIO Interrupt status |
| `define GPIO_CFG_INTR_CLR 8'h10 // reg_4 - GPIO Interrupt Clear |
| `define GPIO_CFG_INTR_SET 8'h14 // reg_5 - GPIO Interrupt Set |
| `define GPIO_CFG_INTR_MASK 8'h18 // reg_6 - GPIO Interrupt Mask |
| `define GPIO_CFG_POS_INTR_SEL 8'h1C // reg_7 - GPIO Posedge Interrupt |
| `define GPIO_CFG_NEG_INTR_SEL 8'h20 // reg_8 - GPIO Neg Interrupt |
| |
| |
| //-------------------------------------------------- |
| // PWM Register |
| // ------------------------------------------------- |
| `define PWM_GLBL_CFG0 8'h00 // reg_0 - PWM Global Config-0 |
| `define PWM_GLBL_CFG1 8'h04 // reg_1 - PWM Global Config-1 |
| `define PWM_GLBL_INTR_MASK 8'h08 // reg_2 - PWM Global Interrupt Status |
| `define PWM_GLBL_INTR_STAT 8'h0C // reg_3 - PWM Global Interrupt Mask |
| `define PWM_BLK0_CFG0 8'h10 // reg_0 - PWM BLK-0 Reg-0 |
| `define PWM_BLK0_CFG1 8'h14 // reg_1 - PWM BLK-0 Reg-1 |
| `define PWM_BLK0_CFG2 8'h18 // reg_2 - PWM BLK-0 Reg-2 |
| `define PWM_BLK0_CFG3 8'h1C // reg_3 - PWM BLK-0 Reg-3 |
| `define PWM_BLK1_CFG0 8'h20 // reg_0 - PWM BLK-1 Reg-0 |
| `define PWM_BLK1_CFG1 8'h24 // reg_1 - PWM BLK-1 Reg-1 |
| `define PWM_BLK1_CFG2 8'h28 // reg_2 - PWM BLK-1 Reg-2 |
| `define PWM_BLK1_CFG3 8'h2C // reg_3 - PWM BLK-1 Reg-3 |
| `define PWM_BLK2_CFG0 8'h30 // reg_0 - PWM BLK-2 Reg-0 |
| `define PWM_BLK2_CFG1 8'h34 // reg_1 - PWM BLK-2 Reg-1 |
| `define PWM_BLK2_CFG2 8'h38 // reg_2 - PWM BLK-2 Reg-2 |
| `define PWM_BLK2_CFG3 8'h3C // reg_3 - PWM BLK-2 Reg-3 |
| `define PWM_BLK3_CFG0 8'h40 // reg_0 - PWM BLK-3 Reg-0 |
| `define PWM_BLK3_CFG1 8'h44 // reg_1 - PWM BLK-3 Reg-1 |
| `define PWM_BLK3_CFG2 8'h48 // reg_2 - PWM BLK-3 Reg-2 |
| `define PWM_BLK3_CFG3 8'h4C // reg_3 - PWM BLK-3 Reg-3 |
| `define PWM_BLK4_CFG0 8'h50 // reg_0 - PWM BLK-4 Reg-0 |
| `define PWM_BLK4_CFG1 8'h54 // reg_1 - PWM BLK-4 Reg-1 |
| `define PWM_BLK4_CFG2 8'h58 // reg_2 - PWM BLK-4 Reg-2 |
| `define PWM_BLK4_CFG3 8'h5C // reg_3 - PWM BLK-4 Reg-3 |
| `define PWM_BLK5_CFG0 8'h60 // reg_0 - PWM BLK-5 Reg-0 |
| `define PWM_BLK5_CFG1 8'h64 // reg_1 - PWM BLK-5 Reg-1 |
| `define PWM_BLK5_CFG2 8'h68 // reg_2 - PWM BLK-5 Reg-2 |
| `define PWM_BLK5_CFG3 8'h6C // reg_3 - PWM BLK-5 Reg-3 |
| |
| //-------------------------------------------------- |
| // TIMER Register |
| // ------------------------------------------------- |
| `define TIMER_CFG_GLBL 8'h00 // reg_0 - Global Config |
| `define TIMER_CFG_TIMER_0 8'h04 // reg_1 - Timer-0 |
| `define TIMER_CFG_TIMER_1 8'h08 // reg_2 - Timer-1 |
| `define TIMER_CFG_TIMER_2 8'h0C // reg_3 - Timer-2 |
| |
| //-------------------------------------------------- |
| // SEMAPHORE Register |
| // ------------------------------------------------- |
| `define SEMA_CFG_LOCK_0 8'h00 // reg_0 - Semaphore Lock Bit-0 |
| `define SEMA_CFG_LOCK_1 8'h04 // reg_1 - Semaphore Lock Bit-1 |
| `define SEMA_CFG_LOCK_2 8'h08 // reg_2 - Semaphore Lock Bit-2 |
| `define SEMA_CFG_LOCK_3 8'h0C // reg_3 - Semaphore Lock Bit-3 |
| `define SEMA_CFG_LOCK_4 8'h10 // reg_4 - Semaphore Lock Bit-4 |
| `define SEMA_CFG_LOCK_5 8'h14 // reg_5 - Semaphore Lock Bit-5 |
| `define SEMA_CFG_LOCK_6 8'h18 // reg_6 - Semaphore Lock Bit-6 |
| `define SEMA_CFG_LOCK_7 8'h1C // reg_7 - Semaphore Lock Bit-7 |
| `define SEMA_CFG_LOCK_8 8'h20 // reg_8 - Semaphore Lock Bit-8 |
| `define SEMA_CFG_LOCK_9 8'h24 // reg_9 - Semaphore Lock Bit-9 |
| `define SEMA_CFG_LOCK_10 8'h28 // reg_10 - Semaphore Lock Bit-10 |
| `define SEMA_CFG_LOCK_11 8'h2C // reg_11 - Semaphore Lock Bit-11 |
| `define SEMA_CFG_LOCK_12 8'h30 // reg_12 - Semaphore Lock Bit-12 |
| `define SEMA_CFG_LOCK_13 8'h34 // reg_13 - Semaphore Lock Bit-13 |
| `define SEMA_CFG_LOCK_14 8'h38 // reg_14 - Semaphore Lock Bit-14 |
| `define SEMA_CFG_STATUS 8'h3C // reg_15 - Semaphore Lock Status |
| |
| |
| //---------------------------------------------------- |
| // Analog Configuration |
| //---------------------------------------------------- |
| `define ANALOG_CFG_DAC0 8'h00 |
| `define ANALOG_CFG_DAC1 8'h04 |
| `define ANALOG_CFG_DAC2 8'h08 |
| `define ANALOG_CFG_DAC3 8'h0C |
| |
| //---------------------------------------------------------- |
| // QSPI Register Map |
| //---------------------------------------------------------- |
| `define QSPIM_GLBL_CTRL 8'h00 |
| `define QSPIM_DMEM_G0_RD_CTRL 8'h04 |
| `define QSPIM_DMEM_G0_WR_CTRL 8'h08 |
| `define QSPIM_DMEM_G1_RD_CTRL 8'h0C |
| `define QSPIM_DMEM_G1_WR_CTRL 8'h10 |
| |
| `define QSPIM_DMEM_CS_AMAP 8'h14 |
| `define QSPIM_DMEM_CA_AMASK 8'h18 |
| |
| `define QSPIM_IMEM_CTRL1 8'h1C |
| `define QSPIM_IMEM_CTRL2 8'h20 |
| `define QSPIM_IMEM_ADDR 8'h24 |
| `define QSPIM_IMEM_WDATA 8'h28 |
| `define QSPIM_IMEM_RDATA 8'h2C |
| `define QSPIM_SPI_STATUS 8'h30 |
| |
| //---------------------------------------------------------- |
| // UART Register Map |
| //---------------------------------------------------------- |
| `define UART_CTRL 8'h00 // Reg-0 |
| `define UART_INTR_STAT 8'h04 // Reg-1 |
| `define UART_BAUD_CTRL1 8'h08 // Reg-2 |
| `define UART_BAUD_CTRL2 8'h0C // Reg-3 |
| `define UART_STATUS 8'h10 // Reg-4 |
| `define UART_TDATA 8'h14 // Reg-5 |
| `define UART_RDATA 8'h18 // Reg-6 |
| `define UART_TFIFO_STAT 8'h1C // Reg-7 |
| `define UART_RFIFO_STAT 8'h20 // Reg-8 |
