)]}'
{
  "foundry": {
    "name": "third_party/shuttle/sky130/mpw-006/foundry",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/foundry"
  },
  "slot-001": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-001",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-001",
    "description": "Free and open...: Hardware accelerator that implements standard encryption algorithm AES ECB."
  },
  "slot-002": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-002",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-002",
    "description": "Microwatt MPW6: Microwatt is a 64 bit OpenPOWER core written in VHDL."
  },
  "slot-003": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-003",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-003",
    "description": "Hack SoC - MPW-6: Hardware implementation of the Hack Computer from the Nand to Tetris courses."
  },
  "slot-004": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-004",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-004",
    "description": "Riscduino-DCore(D3): Riscduino is a Dual 32 bit RISC V based SOC design pin compatible to arduino platform and this soc targeted for efabless Shuttle program."
  },
  "slot-005": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-005",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-005",
    "description": "Riscduino-QCore(Q2): Riscduino is a Quad 32 bit RISC V based SOC design pin compatible to arduino platform and this soc targeted for efabless Shuttle program."
  },
  "slot-006": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-006",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-006",
    "description": "Riscduino-SCore(S4): Arduino pin compatible Single RISCV 32 Bit core Project."
  },
  "slot-007": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-007",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-007",
    "description": "SonaronChip8: process acoustics signals from 8 MEMS microphones with an extended frequency range up to 85 kHz (low ultrasonic band)."
  },
  "slot-008": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-008",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-008",
    "description": "FT8 Receiver Test: A sample tapeout to test needed circuitry for a fully-functional FT8 transceiver."
  },
  "slot-009": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-009",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-009",
    "description": "Azadi_DFT: This project is the extended version of Azadi-SoC, which includes all of the peripherals which were in Azadi-II and few more this time, which were not stable at the time of Azadi-II."
  },
  "slot-010": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-010",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-010",
    "description": "SRAMTestVehicleSequel: Iteration on SRAM test vehicle that was not selected for MPW5."
  },
  "slot-011": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-011",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-011",
    "description": "ISA 16 bit Microprocessor: This is simple microprocessor."
  },
  "slot-012": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-012",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-012",
    "description": "Asicle rollover: Have you played Wordle on raw silicon yet? (This is a resubmission from MPW5.)."
  },
  "slot-013": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-013",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-013",
    "description": "10b ADC and...: This submission features: 10b SAR-ADC, Bandgap reference, Testbuffer, Clock generator, LDO, Bias Network."
  },
  "slot-014": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-014",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-014",
    "description": "YONGA-Modbus Controller: A Modbus controller which has a read(03h) and a write(10h) function."
  },
  "slot-015": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-015",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-015",
    "description": "ChristmasTreeCont...: Christmas tree controller (MPW5 ReRun)."
  },
  "slot-016": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-016",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-016",
    "description": "OpenRAM Test Design: This project was designed to be able to test the SRAM macros generated using OpenRAM flow."
  },
  "slot-017": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-017",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-017",
    "description": "4 x PWM: PWM (Pulse Width Modulation) modules (resubmission from MPW-5)."
  },
  "slot-018": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-018",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-018",
    "description": "HyperRAM Interface: Resubmission of Steve Goldsmith\u0027s project."
  },
  "slot-019": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-019",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-019",
    "description": "Adaptive...: We make implementation of a flexible 32-point Discrete Cosine Transform (DCT)."
  },
  "slot-020": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-020",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-020",
    "description": "CMOS cascode...: This is a high speed dynamic comparator."
  },
  "slot-021": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-021",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-021",
    "description": "CMOS High Speed...: This is a novel dynamic comparator design that improves the common mode performance."
  },
  "slot-022": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-022",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-022",
    "description": "ORDER_PRGA_MPW6: A 512-LUT4 FPGA generated using PRGA (Princeton Reconfigurable Gate Array); An 8x8 array of CLBs"
  },
  "slot-023": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-023",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-023",
    "description": "Temporal Runtime...: This is a specialized on-chip microcontroller/SoC component for performing runtime monitoring of temporal logic formulas."
  },
  "slot-024": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-024",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-024",
    "description": "MARMOT RISC-V SOC: Targeting 5-year continuous operation, a solar panel, a power supply board, a logic board, and lithium batteries are to be integrated in a waterproof housing to form an IoT."
  },
  "slot-025": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-025",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-025",
    "description": "RNG MULTI SCROLL CHAOS: In this study, a digital RNG based on chaotic oscillators was implemented using the SKY130 process node."
  },
  "slot-026": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-026",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-026",
    "description": "Mixed_signal_circ...: Basic ReRAM, Floating Gate, and other analog structures."
  },
  "slot-027": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-027",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-027",
    "description": "Mixed_signal_circuits_v2: Mixed signal circuits for analog synapses."
  },
  "slot-028": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-028",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-028",
    "description": "direct...: This project contains blocks of a receiver."
  },
  "slot-029": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-029",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-029",
    "description": "Floating_Point_Un...: This is the Floating point unit which supports the IEEE-754 Half Precision format."
  },
  "slot-030": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-030",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-030",
    "description": "Floating_Point_Un...: This is the first ever Bfloat16 precision floating point unit designed by undergraduate students of DHA Suffa University Pakistan."
  },
  "slot-031": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-031",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-031",
    "description": "Floating_Point_Un...: This is the first ever Single Precision Floating Point Unit designed by Undergraduate Students of DHA Suffa Univeristy."
  },
  "slot-032": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-032",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-032",
    "description": "Experiar SoC: Experiar SoC is a dual RV32I core processor with peripherals including PWM, SPI, UART, and VGA."
  },
  "slot-033": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-033",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-033",
    "description": "my_caravel_analog_project: This is my first project. 6-bit saradc."
  },
  "slot-034": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-034",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-034",
    "description": "Efabless_MPW6_riscduino: This is a clone project from dineshannayya/riscduino."
  },
  "slot-035": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-035",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-035",
    "description": "Motius Pong: The first game: PONG."
  },
  "slot-036": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-036",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-036",
    "description": "SoC_Now: This SoC is generated by the SoC Now Generator which is the final year project of undergraduate students."
  },
  "slot-037": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-037",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-037",
    "description": "ORDER_PRGA_MPW6_v2: A 512-LUT4 FPGA generated using PRGA (Princeton Reconfigurable Gate Array); An 8x8 array of CLBs"
  },
  "slot-038": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-038",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-038",
    "description": "Optimised Strong...: This is the design of an optimised Strong ARM Latch using modified particle swarm optimisation."
  },
  "slot-039": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-039",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-039",
    "description": "riscduino_qcore_folk: folk of riscduino_qcore for test."
  },
  "slot-040": {
    "name": "third_party/shuttle/sky130/mpw-006/slot-040",
    "clone_url": "https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-006/slot-040",
    "description": "Tensor...: Using NNgen to generate circuits."
  }
}