| ////////////////////////////////////////////////////////////////////////////// |
| // SPDX-FileCopyrightText: 2021 , Dinesh Annayya |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // SPDX-License-Identifier: Apache-2.0 |
| // SPDX-FileContributor: Created by Dinesh Annayya <dinesha@opencores.org> |
| // |
| ////////////////////////////////////////////////////////////////////// |
| //// //// |
| //// Wishbone Interconnect //// |
| //// //// |
| //// This file is part of the YIFive cores project //// |
| //// https://github.com/dineshannayya/yifive_r0.git //// |
| //// http://www.opencores.org/cores/yifive/ //// |
| //// //// |
| //// Description //// |
| //// 1. 3 masters and 3 slaves share bus Wishbone connection //// |
| //// 2. This block implement simple round robine request //// |
| //// //// |
| //// To Do: //// |
| //// nothing //// |
| //// //// |
| //// Author(s): //// |
| //// - Dinesh Annayya, dinesha@opencores.org //// |
| //// //// |
| //// Revision : //// |
| //// 0.1 - 12th June 2021, Dinesh A //// |
| //// 0.2 - 17th June 2021, Dinesh A //// |
| //// Stagging FF added at Slave Interface to break //// |
| //// path //// |
| //// 0.3 - 21th June 2021, Dinesh A //// |
| //// slave port 3 added for uart //// |
| //// 0.4 - 25th June 2021, Dinesh A //// |
| //// External Memory Map changed and made same as //// |
| //// internal memory map //// |
| //// 0.4 - 27th June 2021, Dinesh A //// |
| //// unused tie off at digital core level brought inside //// |
| //// to avoid core level power hook up //// |
| //// 0.5 - 28th June 2021, Dinesh A //// |
| //// interchange the Master port for better physical //// |
| //// placement //// |
| //// m0: external host //// |
| //// m1: risc imem //// |
| //// m2: risc dmem //// |
| //// 0.6 - 06 Nov 2021, Dinesh A //// |
| //// Push the clock skew logic inside the block due to //// |
| //// global power hooking challanges for small block at //// |
| //// top level //// |
| //// 0.7 - 07 Dec 2021, Dinesh A //// |
| //// Buffer channel are added insider wb_inter to simply //// |
| //// global routing //// |
| //// 0.8 -10 Dec 2021 , Dinesh A //// |
| //// two more slave port added for MBIST and ADC port //// |
| //// removed //// |
| //// Memory remap added to move the RISC Program memory //// |
| //// to SRAM Memory //// |
| //// 0.9 - 15 Dec 2021, Dinesh A //// |
| //// Consolidated 4 MBIST port into one 8KB Port //// |
| //// //// |
| ////////////////////////////////////////////////////////////////////// |
| //// //// |
| //// Copyright (C) 2000 Authors and OPENCORES.ORG //// |
| //// //// |
| //// This source file may be used and distributed without //// |
| //// restriction provided that this copyright statement is not //// |
| //// removed from the file and that any derivative work contains //// |
| //// the original copyright notice and the associated disclaimer. //// |
| //// //// |
| //// This source file is free software; you can redistribute it //// |
| //// and/or modify it under the terms of the GNU Lesser General //// |
| //// Public License as published by the Free Software Foundation; //// |
| //// either version 2.1 of the License, or (at your option) any //// |
| //// later version. //// |
| //// //// |
| //// This source is distributed in the hope that it will be //// |
| //// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
| //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
| //// PURPOSE. See the GNU Lesser General Public License for more //// |
| //// details. //// |
| //// //// |
| //// You should have received a copy of the GNU Lesser General //// |
| //// Public License along with this source; if not, download it //// |
| //// from http://www.opencores.org/lgpl.shtml //// |
| //// //// |
| ////////////////////////////////////////////////////////////////////// |
| |
| |
| |
| module wb_interconnect #( |
| parameter CH_CLK_WD = 7, |
| parameter CH_DATA_WD = 103 |
| ) ( |
| `ifdef USE_POWER_PINS |
| input logic vccd1, // User area 1 1.8V supply |
| input logic vssd1, // User area 1 digital ground |
| `endif |
| // Bus repeaters |
| input [CH_CLK_WD-1:0] ch_clk_in, |
| output [CH_CLK_WD-1:0] ch_clk_out, |
| input [CH_DATA_WD-1:0] ch_data_in, |
| output [CH_DATA_WD-1:0]ch_data_out, |
| |
| // Clock Skew Adjust |
| input logic [3:0] cfg_cska_wi, |
| input logic wbd_clk_int, |
| output logic wbd_clk_wi, |
| |
| |
| input logic clk_i, |
| input logic rst_n, |
| |
| input logic [3:0] boot_remap, // When remap is enabled |
| // [0] - 0x0000_0000 - 0x0000_07FF Map to MBIST1 |
| // [1] - 0x0000_0800 - 0x0000_0FFF Map to MBIST2 |
| // [2] - 0x0000_1000 - 0x0000_17FF Map to MBIST3 |
| // [3] - 0x0000_1800 - 0x0000_1FFF Map to MBIST4 |
| input logic [3:0] dcache_remap, // When dcache remap is enabled, |
| // [0] - 0x0800_0000 - 0x0800_07FF Map to MBIST1 |
| // [1] - 0x0800_0800 - 0x0800_0FFF Map to MBIST2 |
| // [2] - 0x0800_1000 - 0x0800_17FF Map to MBIST3 |
| // [3] - 0x0800_1800 - 0x0800_1FFF Map to MBIST4 |
| |
| // Master 0 Interface |
| input logic [31:0] m0_wbd_dat_i, |
| input logic [31:0] m0_wbd_adr_i, |
| input logic [3:0] m0_wbd_sel_i, |
| input logic m0_wbd_we_i, |
| input logic m0_wbd_cyc_i, |
| input logic m0_wbd_stb_i, |
| output logic [31:0] m0_wbd_dat_o, |
| output logic m0_wbd_ack_o, |
| output logic m0_wbd_lack_o, |
| output logic m0_wbd_err_o, |
| |
| // Master 1 Interface |
| input logic [31:0] m1_wbd_dat_i, |
| input logic [31:0] m1_wbd_adr_i, |
| input logic [3:0] m1_wbd_sel_i, |
| input logic m1_wbd_we_i, |
| input logic m1_wbd_cyc_i, |
| input logic m1_wbd_stb_i, |
| output logic [31:0] m1_wbd_dat_o, |
| output logic m1_wbd_ack_o, |
| output logic m1_wbd_lack_o, |
| output logic m1_wbd_err_o, |
| |
| // Master 2 Interface |
| input logic [31:0] m2_wbd_dat_i, |
| input logic [31:0] m2_wbd_adr_i, |
| input logic [3:0] m2_wbd_sel_i, |
| input logic [9:0] m2_wbd_bl_i, |
| input logic m2_wbd_bry_i, |
| input logic m2_wbd_we_i, |
| input logic m2_wbd_cyc_i, |
| input logic m2_wbd_stb_i, |
| output logic [31:0] m2_wbd_dat_o, |
| output logic m2_wbd_ack_o, |
| output logic m2_wbd_lack_o, |
| output logic m2_wbd_err_o, |
| |
| // Master 3 Interface |
| input logic [31:0] m3_wbd_adr_i, |
| input logic [3:0] m3_wbd_sel_i, |
| input logic [9:0] m3_wbd_bl_i, |
| input logic m3_wbd_bry_i, |
| input logic m3_wbd_we_i, |
| input logic m3_wbd_cyc_i, |
| input logic m3_wbd_stb_i, |
| output logic [31:0] m3_wbd_dat_o, |
| output logic m3_wbd_ack_o, |
| output logic m3_wbd_lack_o, |
| output logic m3_wbd_err_o, |
| |
| // Slave 0 Interface |
| input logic [31:0] s0_wbd_dat_i, |
| input logic s0_wbd_ack_i, |
| input logic s0_wbd_lack_i, |
| //input logic s0_wbd_err_i, - unused |
| output logic [31:0] s0_wbd_dat_o, |
| output logic [31:0] s0_wbd_adr_o, |
| output logic [3:0] s0_wbd_sel_o, |
| output logic [9:0] s0_wbd_bl_o, |
| output logic s0_wbd_bry_o, |
| output logic s0_wbd_we_o, |
| output logic s0_wbd_cyc_o, |
| output logic s0_wbd_stb_o, |
| |
| // Slave 1 Interface |
| input logic [31:0] s1_wbd_dat_i, |
| input logic s1_wbd_ack_i, |
| // input logic s1_wbd_err_i, - unused |
| output logic [31:0] s1_wbd_dat_o, |
| output logic [7:0] s1_wbd_adr_o, |
| output logic [3:0] s1_wbd_sel_o, |
| output logic s1_wbd_we_o, |
| output logic s1_wbd_cyc_o, |
| output logic s1_wbd_stb_o, |
| |
| // Slave 2 Interface |
| input logic [31:0] s2_wbd_dat_i, |
| input logic s2_wbd_ack_i, |
| // input logic s2_wbd_err_i, - unused |
| output logic [31:0] s2_wbd_dat_o, |
| output logic [7:0] s2_wbd_adr_o, // glbl reg need only 8 bits |
| output logic [3:0] s2_wbd_sel_o, |
| output logic s2_wbd_we_o, |
| output logic s2_wbd_cyc_o, |
| output logic s2_wbd_stb_o, |
| |
| // Slave 3 Interface |
| // MBIST |
| input logic [31:0] s3_wbd_dat_i, |
| input logic s3_wbd_ack_i, |
| input logic s3_wbd_lack_i, |
| // input logic s3_wbd_err_i, |
| output logic [31:0] s3_wbd_dat_o, |
| output logic [12:0] s3_wbd_adr_o, |
| output logic [3:0] s3_wbd_sel_o, |
| output logic [9:0] s3_wbd_bl_o, |
| output logic s3_wbd_bry_o, |
| output logic s3_wbd_we_o, |
| output logic s3_wbd_cyc_o, |
| output logic s3_wbd_stb_o |
| ); |
| |
| //////////////////////////////////////////////////////////////////// |
| // |
| // Type define |
| // |
| |
| parameter TARGET_SPI_MEM = 4'b0000; |
| parameter TARGET_SPI_REG = 4'b0000; |
| parameter TARGET_UART = 4'b0001; |
| parameter TARGET_PINMUX = 4'b0010; |
| parameter TARGET_MBIST = 4'b0011; |
| |
| // WishBone Wr Interface |
| typedef struct packed { |
| logic [31:0] wbd_dat; |
| logic [31:0] wbd_adr; |
| logic [3:0] wbd_sel; |
| logic [9:0] wbd_bl; |
| logic wbd_bry; |
| logic wbd_we; |
| logic wbd_cyc; |
| logic wbd_stb; |
| logic [3:0] wbd_tid; // target id |
| } type_wb_wr_intf; |
| |
| // WishBone Rd Interface |
| typedef struct packed { |
| logic [31:0] wbd_dat; |
| logic wbd_ack; |
| logic wbd_lack; |
| logic wbd_err; |
| } type_wb_rd_intf; |
| |
| |
| // Master Write Interface |
| type_wb_wr_intf m0_wb_wr; |
| type_wb_wr_intf m1_wb_wr; |
| type_wb_wr_intf m2_wb_wr; |
| type_wb_wr_intf m3_wb_wr; |
| |
| // Master Read Interface |
| type_wb_rd_intf m0_wb_rd; |
| type_wb_rd_intf m1_wb_rd; |
| type_wb_rd_intf m2_wb_rd; |
| type_wb_rd_intf m3_wb_rd; |
| |
| // Slave Write Interface |
| type_wb_wr_intf s0_wb_wr; |
| type_wb_wr_intf s1_wb_wr; |
| type_wb_wr_intf s2_wb_wr; |
| type_wb_wr_intf s3_wb_wr; |
| |
| // Slave Read Interface |
| type_wb_rd_intf s0_wb_rd; |
| type_wb_rd_intf s1_wb_rd; |
| type_wb_rd_intf s2_wb_rd; |
| type_wb_rd_intf s3_wb_rd; |
| |
| |
| type_wb_wr_intf m_bus_wr; // Multiplexed Master I/F |
| type_wb_rd_intf m_bus_rd; // Multiplexed Slave I/F |
| |
| type_wb_wr_intf s_bus_wr; // Multiplexed Master I/F |
| type_wb_rd_intf s_bus_rd; // Multiplexed Slave I/F |
| |
| // channel repeater |
| assign ch_clk_out = ch_clk_in; |
| assign ch_data_out = ch_data_in; |
| |
| // Wishbone interconnect clock skew control |
| clk_skew_adjust u_skew_wi |
| ( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| .clk_in (wbd_clk_int ), |
| .sel (cfg_cska_wi ), |
| .clk_out (wbd_clk_wi ) |
| ); |
| |
| //------------------------------------------------------------------- |
| // EXTERNAL MEMORY MAP |
| // 0x0000_0000 to 0x0FFF_FFFF - QSPI MEMORY |
| // 0x1000_0000 to 0x1000_00FF - QSPIM REG |
| // 0x1001_0000 to 0x1001_003F - UART |
| // 0x1001_0040 to 0x1001_007F - I2C |
| // 0x1001_0080 to 0x1001_00BF - USB |
| // 0x1001_00C0 to 0x1001_00FF - SSPIM |
| // 0x1002_0000 to 0x1002_00FF - PINMUX |
| // 0x1003_0000 to 0x1003_07FF - SRAM-0 (2KB) |
| // 0x1003_0800 to 0x1003_0FFF - SRAM-1 (2KB) |
| // 0x1003_1000 to 0x1003_17FF - SRAM-2 (2KB) |
| // 0x1003_1800 to 0x1003_1FFF - SRAM-3 (2KB) |
| // 0x3080_0000 to 0x3080_00FF - WB HOST (This decoding happens at wb_host block) |
| // --------------------------------------------------------------------------- |
| // |
| wire [3:0] m0_wbd_tid_i = (m0_wbd_adr_i[31:28] == 4'b0000 ) ? TARGET_SPI_MEM : // SPI |
| (m0_wbd_adr_i[31:16] == 16'h1000 ) ? TARGET_SPI_REG : // SPI REG |
| (m0_wbd_adr_i[31:16] == 16'h1001 ) ? TARGET_UART : // UART/I2C/USB/SPI |
| (m0_wbd_adr_i[31:16] == 16'h1002 ) ? TARGET_PINMUX : // PINMUX |
| (m0_wbd_adr_i[31:16] == 16'h1003 ) ? TARGET_MBIST : // MBIST |
| 4'b0000; |
| |
| //------------------------------ |
| // RISC Data Memory Map |
| // 0x0000_0000 to 0x0FFF_FFFF - QSPIM MEMORY |
| // 0x1000_0000 to 0x1000_00FF - QSPIM REG |
| // 0x1001_0000 to 0x1001_003F - UART |
| // 0x1001_0040 to 0x1001_007F - I2 |
| // 0x1001_0080 to 0x1001_00BF - USB |
| // 0x1001_00C0 to 0x1001_00FF - SSPIM |
| // 0x1002_0000 to 0x1002_00FF - PINMUX |
| // 0x1003_0000 to 0x1003_07FF - SRAM-0 (2KB) |
| // 0x1003_0800 to 0x1003_0FFF - SRAM-1 (2KB) |
| // 0x1003_1000 to 0x1003_17FF - SRAM-2 (2KB) |
| // 0x1003_1800 to 0x1003_1FFF - SRAM-3 (2KB) |
| //----------------------------- |
| // |
| wire [3:0] m1_wbd_tid_i = (boot_remap[0] && m1_wbd_adr_i[31:11] == 21'h0) ? TARGET_MBIST: |
| (boot_remap[1] && m1_wbd_adr_i[31:11] == 21'h1) ? TARGET_MBIST: |
| (boot_remap[2] && m1_wbd_adr_i[31:11] == 21'h2) ? TARGET_MBIST: |
| (boot_remap[3] && m1_wbd_adr_i[31:11] == 21'h3) ? TARGET_MBIST: |
| (dcache_remap[0] && m1_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0000_0) ? TARGET_MBIST: |
| (dcache_remap[1] && m1_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0000_1) ? TARGET_MBIST: |
| (dcache_remap[2] && m1_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0001_0) ? TARGET_MBIST: |
| (dcache_remap[3] && m1_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0001_1) ? TARGET_MBIST: |
| (m1_wbd_adr_i[31:28] == 4'b0000 ) ? TARGET_SPI_MEM : |
| (m1_wbd_adr_i[31:16] == 16'h1000 ) ? TARGET_SPI_REG : |
| (m1_wbd_adr_i[31:16] == 16'h1001 ) ? TARGET_UART : |
| (m1_wbd_adr_i[31:16] == 16'h1002 ) ? TARGET_PINMUX : |
| (m1_wbd_adr_i[31:16] == 16'h1003 ) ? TARGET_MBIST : |
| 4'b0000; |
| |
| wire [3:0] m2_wbd_tid_i = (boot_remap[0] && m2_wbd_adr_i[31:11] == 21'h0) ? TARGET_MBIST: |
| (boot_remap[1] && m2_wbd_adr_i[31:11] == 21'h1) ? TARGET_MBIST: |
| (boot_remap[2] && m2_wbd_adr_i[31:11] == 21'h2) ? TARGET_MBIST: |
| (boot_remap[3] && m2_wbd_adr_i[31:11] == 21'h3) ? TARGET_MBIST: |
| (dcache_remap[0] && m2_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0000_0) ? TARGET_MBIST: |
| (dcache_remap[1] && m2_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0000_1) ? TARGET_MBIST: |
| (dcache_remap[2] && m2_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0001_0) ? TARGET_MBIST: |
| (dcache_remap[3] && m2_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0001_1) ? TARGET_MBIST: |
| (m2_wbd_adr_i[31:28] == 4'b0000 ) ? TARGET_SPI_MEM : |
| (m2_wbd_adr_i[31:16] == 16'h1000 ) ? TARGET_SPI_REG : |
| (m2_wbd_adr_i[31:16] == 16'h1001 ) ? TARGET_UART : |
| (m2_wbd_adr_i[31:16] == 16'h1002 ) ? TARGET_PINMUX : |
| (m2_wbd_adr_i[31:16] == 16'h1003 ) ? TARGET_MBIST : |
| 4'b0000; |
| wire [3:0] m3_wbd_tid_i = (boot_remap[0] && m3_wbd_adr_i[31:11] == 21'h0) ? TARGET_MBIST: |
| (boot_remap[1] && m3_wbd_adr_i[31:11] == 21'h1) ? TARGET_MBIST: |
| (boot_remap[2] && m3_wbd_adr_i[31:11] == 21'h2) ? TARGET_MBIST: |
| (boot_remap[3] && m3_wbd_adr_i[31:11] == 21'h3) ? TARGET_MBIST: |
| (dcache_remap[0] && m3_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0000_0) ? TARGET_MBIST: |
| (dcache_remap[1] && m3_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0000_1) ? TARGET_MBIST: |
| (dcache_remap[2] && m3_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0001_0) ? TARGET_MBIST: |
| (dcache_remap[3] && m3_wbd_adr_i[31:11] == 21'b0000_1000_0000_0000_0001_1) ? TARGET_MBIST: |
| (m3_wbd_adr_i[31:28] == 4'b0000 ) ? TARGET_SPI_MEM : |
| (m3_wbd_adr_i[31:16] == 16'h1000 ) ? TARGET_SPI_REG : |
| (m3_wbd_adr_i[31:16] == 16'h1001 ) ? TARGET_UART : |
| (m3_wbd_adr_i[31:16] == 16'h1002 ) ? TARGET_PINMUX : |
| (m3_wbd_adr_i[31:16] == 16'h1003 ) ? TARGET_MBIST : |
| 4'b0000; |
| //---------------------------------------- |
| // Master Mapping |
| // ------------------------------------- |
| assign m0_wb_wr.wbd_dat = m0_wbd_dat_i; |
| assign m0_wb_wr.wbd_adr = {m0_wbd_adr_i[31:2],2'b00}; |
| assign m0_wb_wr.wbd_sel = m0_wbd_sel_i; |
| assign m0_wb_wr.wbd_bl = 'h1; |
| assign m0_wb_wr.wbd_bry = 'b1; |
| assign m0_wb_wr.wbd_we = m0_wbd_we_i; |
| assign m0_wb_wr.wbd_cyc = m0_wbd_cyc_i; |
| assign m0_wb_wr.wbd_stb = m0_wbd_stb_i; |
| assign m0_wb_wr.wbd_tid = m0_wbd_tid_i; |
| |
| assign m1_wb_wr.wbd_dat = m1_wbd_dat_i; |
| assign m1_wb_wr.wbd_adr = {m1_wbd_adr_i[31:2],2'b00}; |
| assign m1_wb_wr.wbd_sel = m1_wbd_sel_i; |
| assign m1_wb_wr.wbd_bl = 'h1; |
| assign m1_wb_wr.wbd_bry = 'b1; |
| assign m1_wb_wr.wbd_we = m1_wbd_we_i; |
| assign m1_wb_wr.wbd_cyc = m1_wbd_cyc_i; |
| assign m1_wb_wr.wbd_stb = m1_wbd_stb_i; |
| assign m1_wb_wr.wbd_tid = m1_wbd_tid_i; |
| |
| assign m2_wb_wr.wbd_dat = m2_wbd_dat_i; |
| assign m2_wb_wr.wbd_adr = {m2_wbd_adr_i[31:2],2'b00}; |
| assign m2_wb_wr.wbd_sel = m2_wbd_sel_i; |
| assign m2_wb_wr.wbd_bl = m2_wbd_bl_i; |
| assign m2_wb_wr.wbd_bry = m2_wbd_bry_i; |
| assign m2_wb_wr.wbd_we = m2_wbd_we_i; |
| assign m2_wb_wr.wbd_cyc = m2_wbd_cyc_i; |
| assign m2_wb_wr.wbd_stb = m2_wbd_stb_i; |
| assign m2_wb_wr.wbd_tid = m2_wbd_tid_i; |
| |
| assign m3_wb_wr.wbd_dat = 'h0; |
| assign m3_wb_wr.wbd_adr = {m3_wbd_adr_i[31:2],2'b00}; |
| assign m3_wb_wr.wbd_sel = m3_wbd_sel_i; |
| assign m3_wb_wr.wbd_bl = m3_wbd_bl_i; |
| assign m3_wb_wr.wbd_bry = m3_wbd_bry_i; |
| assign m3_wb_wr.wbd_we = m3_wbd_we_i; |
| assign m3_wb_wr.wbd_cyc = m3_wbd_cyc_i; |
| assign m3_wb_wr.wbd_stb = m3_wbd_stb_i; |
| assign m3_wb_wr.wbd_tid = m3_wbd_tid_i; |
| |
| assign m0_wbd_dat_o = m0_wb_rd.wbd_dat; |
| assign m0_wbd_ack_o = m0_wb_rd.wbd_ack; |
| assign m0_wbd_lack_o = m0_wb_rd.wbd_lack; |
| assign m0_wbd_err_o = m0_wb_rd.wbd_err; |
| |
| assign m1_wbd_dat_o = m1_wb_rd.wbd_dat; |
| assign m1_wbd_ack_o = m1_wb_rd.wbd_ack; |
| assign m1_wbd_lack_o = m1_wb_rd.wbd_lack; |
| assign m1_wbd_err_o = m1_wb_rd.wbd_err; |
| |
| assign m2_wbd_dat_o = m2_wb_rd.wbd_dat; |
| assign m2_wbd_ack_o = m2_wb_rd.wbd_ack; |
| assign m2_wbd_lack_o = m2_wb_rd.wbd_lack; |
| assign m2_wbd_err_o = m2_wb_rd.wbd_err; |
| |
| assign m3_wbd_dat_o = m3_wb_rd.wbd_dat; |
| assign m3_wbd_ack_o = m3_wb_rd.wbd_ack; |
| assign m3_wbd_lack_o = m3_wb_rd.wbd_lack; |
| assign m3_wbd_err_o = m3_wb_rd.wbd_err; |
| |
| //---------------------------------------- |
| // Slave Mapping |
| // ------------------------------------- |
| // Masked Now and added stagging FF now |
| assign s0_wbd_dat_o = s0_wb_wr.wbd_dat ; |
| assign s0_wbd_adr_o = s0_wb_wr.wbd_adr ; |
| assign s0_wbd_sel_o = s0_wb_wr.wbd_sel ; |
| assign s0_wbd_bl_o = s0_wb_wr.wbd_bl ; |
| assign s0_wbd_bry_o = s0_wb_wr.wbd_bry ; |
| assign s0_wbd_we_o = s0_wb_wr.wbd_we ; |
| assign s0_wbd_cyc_o = s0_wb_wr.wbd_cyc ; |
| assign s0_wbd_stb_o = s0_wb_wr.wbd_stb ; |
| |
| assign s1_wbd_dat_o = s1_wb_wr.wbd_dat ; |
| assign s1_wbd_adr_o = s1_wb_wr.wbd_adr[7:0] ; |
| assign s1_wbd_sel_o = s1_wb_wr.wbd_sel ; |
| assign s1_wbd_we_o = s1_wb_wr.wbd_we ; |
| assign s1_wbd_cyc_o = s1_wb_wr.wbd_cyc ; |
| assign s1_wbd_stb_o = s1_wb_wr.wbd_stb ; |
| |
| assign s2_wbd_dat_o = s2_wb_wr.wbd_dat ; |
| assign s2_wbd_adr_o = s2_wb_wr.wbd_adr[7:0] ; // Global Reg Need 8 bit |
| assign s2_wbd_sel_o = s2_wb_wr.wbd_sel ; |
| assign s2_wbd_we_o = s2_wb_wr.wbd_we ; |
| assign s2_wbd_cyc_o = s2_wb_wr.wbd_cyc ; |
| assign s2_wbd_stb_o = s2_wb_wr.wbd_stb ; |
| |
| assign s3_wbd_dat_o = s3_wb_wr.wbd_dat[31:0] ; |
| assign s3_wbd_adr_o = s3_wb_wr.wbd_adr[12:0] ; // MBIST Need 13 bit |
| assign s3_wbd_sel_o = s3_wb_wr.wbd_sel[3:0] ; |
| assign s3_wbd_bl_o = s3_wb_wr.wbd_bl ; |
| assign s3_wbd_bry_o = s3_wb_wr.wbd_bry ; |
| assign s3_wbd_we_o = s3_wb_wr.wbd_we ; |
| assign s3_wbd_cyc_o = s3_wb_wr.wbd_cyc ; |
| assign s3_wbd_stb_o = s3_wb_wr.wbd_stb ; |
| |
| |
| assign s0_wb_rd.wbd_dat = s0_wbd_dat_i ; |
| assign s0_wb_rd.wbd_ack = s0_wbd_ack_i ; |
| assign s0_wb_rd.wbd_lack = s0_wbd_lack_i ; |
| assign s0_wb_rd.wbd_err = 1'b0; // s0_wbd_err_i ; - unused |
| |
| assign s1_wb_rd.wbd_dat = s1_wbd_dat_i ; |
| assign s1_wb_rd.wbd_ack = s1_wbd_ack_i ; |
| assign s1_wb_rd.wbd_lack = s1_wbd_ack_i ; |
| assign s1_wb_rd.wbd_err = 1'b0; // s1_wbd_err_i ; - unused |
| |
| assign s2_wb_rd.wbd_dat = s2_wbd_dat_i ; |
| assign s2_wb_rd.wbd_ack = s2_wbd_ack_i ; |
| assign s2_wb_rd.wbd_lack = s2_wbd_ack_i ; |
| assign s2_wb_rd.wbd_err = 1'b0; // s2_wbd_err_i ; - unused |
| |
| assign s3_wb_rd.wbd_dat = s3_wbd_dat_i ; |
| assign s3_wb_rd.wbd_ack = s3_wbd_ack_i ; |
| assign s3_wb_rd.wbd_lack = s3_wbd_lack_i ; |
| assign s3_wb_rd.wbd_err = 1'b0; // s3_wbd_err_i ; - unused |
| |
| // |
| // arbitor |
| // |
| logic [1:0] gnt; |
| |
| wb_arb u_wb_arb( |
| .clk(clk_i), |
| .rstn(rst_n), |
| .req({ m3_wbd_stb_i & !m3_wbd_lack_o, |
| m2_wbd_stb_i & !m2_wbd_lack_o, |
| m1_wbd_stb_i & !m1_wbd_lack_o, |
| m0_wbd_stb_i & !m0_wbd_lack_o}), |
| .gnt(gnt) |
| ); |
| |
| |
| // Generate Multiplexed Master Interface based on grant |
| always_comb begin |
| case(gnt) |
| 3'h0: m_bus_wr = m0_wb_wr; |
| 3'h1: m_bus_wr = m1_wb_wr; |
| 3'h2: m_bus_wr = m2_wb_wr; |
| 3'h3: m_bus_wr = m3_wb_wr; |
| default: m_bus_wr = m0_wb_wr; |
| endcase |
| end |
| |
| |
| // Generate Multiplexed Slave Interface based on target Id |
| wire [3:0] s_wbd_tid = s_bus_wr.wbd_tid; // to fix iverilog warning |
| always_comb begin |
| case(s_wbd_tid) |
| 4'h0: s_bus_rd = s0_wb_rd; |
| 4'h1: s_bus_rd = s1_wb_rd; |
| 4'h2: s_bus_rd = s2_wb_rd; |
| 4'h3: s_bus_rd = s3_wb_rd; |
| default: s_bus_rd = s0_wb_rd; |
| endcase |
| end |
| |
| |
| // Connect Master => Slave |
| assign s0_wb_wr = (s_wbd_tid == 3'b000) ? s_bus_wr : 'h0; |
| assign s1_wb_wr = (s_wbd_tid == 3'b001) ? s_bus_wr : 'h0; |
| assign s2_wb_wr = (s_wbd_tid == 3'b010) ? s_bus_wr : 'h0; |
| assign s3_wb_wr = (s_wbd_tid == 3'b011) ? s_bus_wr : 'h0; |
| |
| // Connect Slave to Master |
| assign m0_wb_rd = (gnt == 2'b00) ? m_bus_rd : 'h0; |
| assign m1_wb_rd = (gnt == 2'b01) ? m_bus_rd : 'h0; |
| assign m2_wb_rd = (gnt == 2'b10) ? m_bus_rd : 'h0; |
| assign m3_wb_rd = (gnt == 2'b11) ? m_bus_rd : 'h0; |
| |
| |
| // Stagging FF to break write and read timing path |
| sync_wbb u_sync_wbb( |
| .clk_i (clk_i ), |
| .rst_n (rst_n ), |
| // WishBone Input master I/P |
| .wbm_dat_i (m_bus_wr.wbd_dat ), |
| .wbm_adr_i (m_bus_wr.wbd_adr ), |
| .wbm_sel_i (m_bus_wr.wbd_sel ), |
| .wbm_bl_i (m_bus_wr.wbd_bl ), |
| .wbm_bry_i (m_bus_wr.wbd_bry ), |
| .wbm_we_i (m_bus_wr.wbd_we ), |
| .wbm_cyc_i (m_bus_wr.wbd_cyc ), |
| .wbm_stb_i (m_bus_wr.wbd_stb ), |
| .wbm_tid_i (m_bus_wr.wbd_tid ), |
| .wbm_dat_o (m_bus_rd.wbd_dat ), |
| .wbm_ack_o (m_bus_rd.wbd_ack ), |
| .wbm_lack_o (m_bus_rd.wbd_lack ), |
| .wbm_err_o (m_bus_rd.wbd_err ), |
| |
| // Slave Interface |
| .wbs_dat_i (s_bus_rd.wbd_dat ), |
| .wbs_ack_i (s_bus_rd.wbd_ack ), |
| .wbs_lack_i (s_bus_rd.wbd_lack ), |
| .wbs_err_i (s_bus_rd.wbd_err ), |
| .wbs_dat_o (s_bus_wr.wbd_dat ), |
| .wbs_adr_o (s_bus_wr.wbd_adr ), |
| .wbs_sel_o (s_bus_wr.wbd_sel ), |
| .wbs_bl_o (s_bus_wr.wbd_bl ), |
| .wbs_bry_o (s_bus_wr.wbd_bry ), |
| .wbs_we_o (s_bus_wr.wbd_we ), |
| .wbs_cyc_o (s_bus_wr.wbd_cyc ), |
| .wbs_stb_o (s_bus_wr.wbd_stb ), |
| .wbs_tid_o (s_bus_wr.wbd_tid ) |
| |
| ); |
| |
| |
| endmodule |
| |
