# Copyright 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""
Places the IOs according to an input file. Supports regexes.
File format:
#N|#S|#E|#W
pin1_regex
pin2_regex
...

#S|#N|#E|#W
...
...
"""
import odb

import os
import re
import sys
import click
import random


@click.command()
@click.option(
    "-u",
    "--unmatched-error",
    is_flag=True,
    default=False,
    help="Treat unmatched pins as error",
)
@click.option("-l", "--input-lef", required=True, help="Input merged tlef/lef file.")
@click.option(
    "-o",
    "--output-def",
    default="./output.def",
    help="Output DEF file with newly placed pins",
)
@click.option("-c", "--config", required=False, help="Optional configuration file.")
@click.option(
    "-r",
    "--reverse",
    default="",
    type=str,
    help="Reverse along comma,delimited,cardinals: e.g. N,E",
)
@click.option("-L", "--length", default=2, type=float, help="Pin length in microns.")
@click.option(
    "-V",
    "--ver-layer",
    required=True,
    help="Name of metal layer to place vertical pins on.",
)
@click.option(
    "-H",
    "--hor-layer",
    required=True,
    help="Name of metal layer to place horizontal pins on.",
)
@click.option(
    "--hor-extension",
    default=0,
    type=float,
    help="Extension for vertical pins in microns.",
)
@click.option(
    "--ver-extension",
    default=0,
    type=float,
    help="Extension for horizontal pins in microns.",
)
@click.option(
    "--ver-width-mult", default=2, type=float, help="Multiplier for vertical pins."
)
@click.option(
    "--hor-width-mult", default=2, type=float, help="Multiplier for horizontal pins."
)
@click.option(
    "--bus-sort/--no-bus-sort",
    default=False,
    help="Misnomer: pins are grouped by index instead of bus, i.e. a[0] goes with b[0] instead of a[1].",
)
@click.argument("input_def")
def cli(
    input_lef,
    output_def,
    config,
    ver_layer,
    hor_layer,
    ver_width_mult,
    hor_width_mult,
    length,
    hor_extension,
    ver_extension,
    reverse,
    bus_sort,
    input_def,
    unmatched_error,
):
    """
    Places the IOs in an input def with an optional config file that supports regexes.

    Config format:
    #N|#S|#E|#W
    pin1_regex (low co-ordinates to high co-ordinates; e.g., bottom to top and left to right)
    pin2_regex
    ...

    #S|#N|#E|#W
    """

    def_file_name = input_def
    lef_file_name = input_lef
    output_def_file_name = output_def
    config_file_name = config
    bus_sort_flag = bus_sort
    unmatched_error_flag = unmatched_error

    h_layer_name = hor_layer
    v_layer_name = ver_layer

    h_width_mult = float(hor_width_mult)
    v_width_mult = float(ver_width_mult)

    # Initialize OpenDB
    db_top = odb.dbDatabase.create()
    odb.read_lef(db_top, lef_file_name)
    odb.read_def(db_top, def_file_name)
    block = db_top.getChip().getBlock()

    micron_in_units = block.getDefUnits()

    LENGTH = int(micron_in_units * length)

    H_EXTENSION = int(micron_in_units * hor_extension)
    V_EXTENSION = int(micron_in_units * ver_extension)

    if H_EXTENSION < 0:
        H_EXTENSION = 0

    if V_EXTENSION < 0:
        V_EXTENSION = 0

    reverse_arr_raw = reverse.split(",")
    reverse_arr = []
    for element in reverse_arr_raw:
        if element.strip() != "":
            reverse_arr.append(f"#{element}")

    def getGrid(origin, count, step):
        tracks = []
        pos = origin
        for i in range(count):
            tracks.append(pos)
            pos += step
        assert len(tracks) > 0
        tracks.sort()

        return tracks

    def equallySpacedSeq(m, arr):
        seq = []
        n = len(arr)
        # Bresenham
        indices = [i * n // m + n // (2 * m) for i in range(m)]
        for i in indices:
            seq.append(arr[i])
        return seq

    # HUMAN SORTING: https://stackoverflow.com/questions/5967500/how-to-correctly-sort-a-string-with-a-number-inside
    def natural_keys(enum):
        def atof(text):
            try:
                retval = float(text)
            except ValueError:
                retval = text
            return retval

        text = enum[0]
        text = re.sub(r"(\[|\]|\.|\$)", "", text)
        """
        alist.sort(key=natural_keys) sorts in human order
        http://nedbatchelder.com/blog/200712/human_sorting.html
        (see toothy's implementation in the comments)
        float regex comes from https://stackoverflow.com/a/12643073/190597
        """
        return [
            atof(c) for c in re.split(r"[+-]?([0-9]+(?:[.][0-9]*)?|[.][0-9]+)", text)
        ]

    def bus_keys(enum):
        text = enum[0]
        m = re.match(r"^.*\[(\d+)\]$", text)
        if not m:
            return -1
        else:
            return int(m.group(1))

    # read config

    pin_placement_cfg = {"#N": [], "#E": [], "#S": [], "#W": []}
    cur_side = None
    if config_file_name is not None and config_file_name != "":
        with open(config_file_name, "r") as config_file:
            for line in config_file:
                line = line.split()
                if len(line) == 0:
                    continue

                if len(line) > 1:
                    print("Only one entry allowed per line.")
                    sys.exit(1)

                token = line[0]

                if cur_side is not None and token[0] != "#":
                    pin_placement_cfg[cur_side].append(token)
                elif token not in [
                    "#N",
                    "#E",
                    "#S",
                    "#W",
                    "#NR",
                    "#ER",
                    "#SR",
                    "#WR",
                    "#BUS_SORT",
                ]:
                    print(
                        "Valid directives are #N, #E, #S, or #W. Append R for reversing the default order.",
                        "Use #BUS_SORT to group 'bus bits' by index.",
                        "Please make sure you have set a valid side first before listing pins",
                    )
                    sys.exit(1)
                elif token == "#BUS_SORT":
                    bus_sort_flag = True
                else:
                    if len(token) == 3:
                        token = token[0:2]
                        reverse_arr.append(token)
                    cur_side = token

    # build a list of pins

    chip_top = db_top.getChip()
    block_top = chip_top.getBlock()
    top_design_name = block_top.getName()
    tech = db_top.getTech()

    H_LAYER = tech.findLayer(h_layer_name)
    V_LAYER = tech.findLayer(v_layer_name)

    H_WIDTH = int(h_width_mult * H_LAYER.getWidth())
    V_WIDTH = int(v_width_mult * V_LAYER.getWidth())

    print("Top-level design name:", top_design_name)

    bterms = block_top.getBTerms()
    bterms_enum = []
    for bterm in bterms:
        pin_name = bterm.getName()
        bterms_enum.append((pin_name, bterm))

    # sort them "humanly"
    bterms_enum.sort(key=natural_keys)
    if bus_sort_flag:
        bterms_enum.sort(key=bus_keys)
    bterms = [bterm[1] for bterm in bterms_enum]

    pin_placement = {"#N": [], "#E": [], "#S": [], "#W": []}
    bterm_regex_map = {}
    for side in pin_placement_cfg:
        for regex in pin_placement_cfg[side]:  # going through them in order
            regex += "$"  # anchor
            for bterm in bterms:
                # if a pin name matches multiple regexes, their order will be
                # arbitrary. More refinement requires more strict regexes (or just
                # the exact pin name).
                pin_name = bterm.getName()
                if re.match(regex, pin_name) is not None:
                    if bterm in bterm_regex_map:
                        print(
                            "Error: Multiple regexes matched",
                            pin_name,
                            ". Those are",
                            bterm_regex_map[bterm],
                            "and",
                            regex,
                        )
                        sys.exit(os.EX_DATAERR)
                    bterm_regex_map[bterm] = regex
                    pin_placement[side].append(bterm)  # to maintain the order

    unmatched_bterms = [bterm for bterm in bterms if bterm not in bterm_regex_map]

    if len(unmatched_bterms) > 0:
        print("Warning: Some pins weren't matched by the config file")
        print("Those are:", [bterm.getName() for bterm in unmatched_bterms])
        if unmatched_error_flag:
            print("Treating unmatched pins as errors. Exiting..")
            sys.exit(1)
        else:
            print("Assigning random sides to the above pins")
            for bterm in unmatched_bterms:
                random_side = random.choice(list(pin_placement.keys()))
                pin_placement[random_side].append(bterm)

    assert len(block_top.getBTerms()) == len(
        pin_placement["#N"]
        + pin_placement["#E"]
        + pin_placement["#S"]
        + pin_placement["#W"]
    )

    # generate slots

    DIE_AREA = block_top.getDieArea()
    BLOCK_LL_X = DIE_AREA.xMin()
    BLOCK_LL_Y = DIE_AREA.yMin()
    BLOCK_UR_X = DIE_AREA.xMax()
    BLOCK_UR_Y = DIE_AREA.yMax()

    print("Block boundaries:", BLOCK_LL_X, BLOCK_LL_Y, BLOCK_UR_X, BLOCK_UR_Y)

    origin, count, step = block_top.findTrackGrid(H_LAYER).getGridPatternY(0)
    h_tracks = getGrid(origin, count, step)

    origin, count, step = block_top.findTrackGrid(V_LAYER).getGridPatternX(0)
    v_tracks = getGrid(origin, count, step)

    for rev in reverse_arr:
        pin_placement[rev].reverse()

    # create the pins
    for side in pin_placement:
        if side in ["#N", "#S"]:
            slots = equallySpacedSeq(len(pin_placement[side]), v_tracks)
        else:
            slots = equallySpacedSeq(len(pin_placement[side]), h_tracks)

        assert len(slots) == len(pin_placement[side])

        for i in range(len(pin_placement[side])):
            bterm = pin_placement[side][i]
            slot = slots[i]

            pin_name = bterm.getName()
            pins = bterm.getBPins()
            if len(pins) > 0:
                print("Warning:", pin_name, "already has shapes. Modifying them")
                assert len(pins) == 1
                pin_bpin = pins[0]
            else:
                pin_bpin = odb.dbBPin_create(bterm)

            pin_bpin.setPlacementStatus("PLACED")

            if side in ["#N", "#S"]:
                rect = odb.Rect(0, 0, V_WIDTH, LENGTH + V_EXTENSION)
                if side == "#N":
                    y = BLOCK_UR_Y - LENGTH
                else:
                    y = BLOCK_LL_Y - V_EXTENSION
                rect.moveTo(slot - V_WIDTH // 2, y)
                odb.dbBox_create(pin_bpin, V_LAYER, *rect.ll(), *rect.ur())
            else:
                rect = odb.Rect(0, 0, LENGTH + H_EXTENSION, H_WIDTH)
                if side == "#E":
                    x = BLOCK_UR_X - LENGTH
                else:
                    x = BLOCK_LL_X - H_EXTENSION
                rect.moveTo(x, slot - H_WIDTH // 2)
                odb.dbBox_create(pin_bpin, H_LAYER, *rect.ll(), *rect.ur())

    print(
        f"Writing {output_def_file_name}...",
    )
    odb.write_def(block_top, output_def_file_name)


if __name__ == "__main__":
    cli()