# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0

set ::env(PDK) "sky130A"
set ::env(STD_CELL_LIBRARY) "sky130_fd_sc_hd"

set script_dir [file dirname [file normalize [info script]]]

set ::env(DESIGN_NAME) user_project

set ::env(VERILOG_FILES) "\
	$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
    $script_dir/../../verilog/rtl/user_project.v \
	$script_dir/../../verilog/rtl/monitor.v \
    $script_dir/../../thirdparty/bextdep/bextdep.v \
    $script_dir/../../thirdparty/bextdep/bextdep_pps.v"
    
### Black-box verilog and views
#set ::env(VERILOG_FILES_BLACKBOX) "\
#	$::env(PDK_ROOT)/sky130B/libs.ref/sky130_sram_macros/verilog/sky130_sram_2kbyte_1rw1r_32x512_8.v \
#    $::env(PDK_ROOT)/sky130B/libs.ref/sky130_sram_macros/verilog/sky130_sram_1kbyte_1rw1r_32x256_8.v"

#set ::env(EXTRA_LEFS) "\
#	$::env(PDK_ROOT)/sky130B/libs.ref/sky130_sram_macros/lef/sky130_sram_2kbyte_1rw1r_32x512_8.lef \ 
#    $::env(PDK_ROOT)/sky130B/libs.ref/sky130_sram_macros/lef/sky130_sram_1kbyte_1rw1r_32x256_8.lef"

#set ::env(EXTRA_GDS_FILES) "\
#	$::env(PDK_ROOT)/sky130B/libs.ref/sky130_sram_macros/gds/sky130_sram_2kbyte_1rw1r_32x512_8.gds \
#    $::env(PDK_ROOT)/sky130B/libs.ref/sky130_sram_macros/gds/sky130_sram_1kbyte_1rw1r_32x256_8.gds"

### Macro Placement
#set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg
    

set ::env(DESIGN_IS_CORE) 0

set ::env(CLOCK_PORT) "wb_clk_i"
# set ::env(CLOCK_NET) "counter.clk"
set ::env(CLOCK_PERIOD) "10"

set ::env(FP_SIZING) absolute
# Size 800x500 works with 0.2, 17, 700x500 works with 0.2/19; 600x500 with 0.23/19, 500x500, 0.27/21
set ::env(DIE_AREA)  "0 0 380 414"

set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg

set ::env(PL_BASIC_PLACEMENT) 0
set ::env(PL_TARGET_DENSITY) 0.42
set ::env(FP_CORE_UTIL) 42
set ::env(SYNTH_STRATEGY) "DELAY 1"
set ::env(CELL_PAD) {4} 
# 5 Earlier
# Vorher: 50 0.45
# Vorher: 30 0.2

# More ERT effort
#set ::env(DRT_OPT_ITERS) 99


# Taken from elsewhere: https://github.com/dineshannayya/riscduino/blob/master/openlane/yifive/config.tcl
set ::env(PL_TIME_DRIVEN) 1
# set ::env(PL_TARGET_DENSITY) "0.1"
# set ::env(FP_CORE_UTIL) "37"
# set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
# set ::env(DIODE_INSERTION_STRATEGY) 4

set ::env(PL_RESIZER_HOLD_SLACK_MARGIN) 0.5
set ::env(GLB_RESIZER_HOLD_SLACK_MARGIN) 0.5

# Taken from: https://github.com/The-OpenROAD-Project/OpenLane/issues/948
set ::env(CELL_PAD_EXCLUDE) {sky130_fd_sc_hd__tap* sky130_fd_sc_hd__decap* sky130_fd_sc_hd__fill* sky130_fd_sc_hd__diode*}

# Taken from: https://github.com/The-OpenROAD-Project/OpenLane/issues/948
# set ::env(GLB_RT_ALLOW_CONGESTION) 1
# set ::env(DRT_OPT_ITERS) 2048

# Alternative DIODE INSERTION STRATAEGY - 3 is OpenLane's.
# set ::env(DIODE_INSERTION_STRATEGY) 1

# Maximum layer used for routing is metal 4.
# This is because this macro will be inserted in a top level (user_project_wrapper) 
# where the PDN is planned on metal 5. So, to avoid having shorts between routes
# in this macro and the top level metal 5 stripes, we have to restrict routes to metal4.  
# 
# set ::env(GLB_RT_MAXLAYER) 5

set ::env(RT_MAX_LAYER) {met4}

# You can draw more power domains if you need to 
set ::env(VDD_NETS) [list {vccd1}]
set ::env(GND_NETS) [list {vssd1}]

set ::env(DIODE_INSERTION_STRATEGY) 4
set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 5
# Diode insertion strategy was: 4
# If you're going to use multiple power domains, then disable cvc run.
set ::env(RUN_CVC) 1