diff --git a/Makefile b/Makefile
index 53869ec..ff82bc4 100644
--- a/Makefile
+++ b/Makefile
@@ -94,9 +94,9 @@
 $(DV_PATTERNS): verify-% : ./verilog/dv/%  check-coremark_repo check-riscv_comp_repo check-riscv_test_repo
 	docker run -v ${TARGET_PATH}:${TARGET_PATH} \
 		-e TARGET_PATH=${TARGET_PATH} \
-		-e TOOLS=/opt/riscv64i \
+		-e TOOLS=/opt/riscv32i \
 		-e DESIGNS=$(TARGET_PATH) \
-		-e GCC_PREFIX=riscv64-unknown-elf \
+		-e GCC_PREFIX=riscv32-unknown-elf \
 		-u $$(id -u $$USER):$$(id -g $$USER) riscduino/dv_setup:mpw6 \
 		sh -c $(verify_command)
 
diff --git a/README.md b/README.md
index 2776bab..92d5b85 100644
--- a/README.md
+++ b/README.md
@@ -38,7 +38,12 @@
 # Overview
 
 Riscduino is a Single 32 bit RISC V based SOC design pin compatible to arudino platform and this soc targetted for efabless Shuttle program.  This project uses only open source tool set for simulation,synthesis and backend tools.  The SOC flow follow the openlane methodology and SOC environment is compatible with efabless/carvel methodology.
+<table>
+  <tr>
+    <td  align="center"><img src="./docs/source/_static/Riscduino_Integration.png" ></td>
+  </tr>
 
+</table>
 # Riscduino Block Diagram
 
 <table>
@@ -194,7 +199,7 @@
   <tr align="center"> <td> SFlash          </td> <td> sflash_io1             </td> <td>                 </td> <td> digital_io[30]                       </td></tr>
   <tr align="center"> <td> SFlash          </td> <td> sflash_io2             </td> <td>                 </td> <td> digital_io[31]                       </td></tr>
   <tr align="center"> <td> SFlash          </td> <td> sflash_io3             </td> <td>                 </td> <td> digital_io[32]                       </td></tr>
-  <tr align="center"> <td> SSRAM           </td> <td> Reserved               </td> <td>                 </td> <td> digital_io[33]                       </td></tr>
+  <tr align="center"> <td> SSRAM           </td> <td> dbg_clk_mon            </td> <td>                 </td> <td> digital_io[33]                       </td></tr>
   <tr align="center"> <td> SSRAM           </td> <td> uartm rxd              </td> <td>                 </td> <td> digital_io[34]                       </td></tr>
   <tr align="center"> <td> SSRAM           </td> <td> uartm txd              </td> <td>                 </td> <td> digital_io[35]                       </td></tr>
   <tr align="center"> <td> usb1.1          </td> <td> usb_dp                 </td> <td>                 </td> <td> digital_io[36]                       </td></tr>
@@ -659,24 +664,34 @@
 
 Examples:
 ``` sh
-    make verify-wb_port  
-    make verify-risc_boot
-    make verify-uart_master
-    make verify-user_basic
-    make verify-user_uart
-    make verify-user_uart1
-    make verify-user_spi
-    make verify-user_i2cm
-    make verify-user_risc_boot
-    make verify-user_pwm
-    make verify-user_timer
-    make verify-user_sspi
-    make verify-user_qspi
-    make verify-user_usb
-    make verify-user_uart_master
-    make verify-wb_port SIM=RTL DUMP=OFF
-    make verify-wb_port SIM=RTL DUMP=ON
-    make verify-riscv_regress
+    make verify-wb_port                        - User Wishbone Test from caravel
+    make verify-risc_boot                      - User Risc core test from caravel
+    make verify-uart_master                    - User uart master test from caravel
+    make verify-user_basic                     - Standalone Basic signal and clock divider test
+    make verify-user_uart                      - Standalone user uart-0 test using user risc core
+    make verify-user_uart1                     - Standalone user uart-0 test using user risc core
+    make verify-user_i2cm                      - Standalone user i2c test
+    make verify-user_risc_boot                 - standalone user risc core-0 boot test
+    make verify-user_pwm                       - standalone user pwm test
+    make verify-user_timer                     - standalone user timer test
+    make verify-user_sspi                      - standalone user spi test
+    make verify-user_qspi                      - standalone user quad spi test
+    make verify-user_usb                       - standalone user usb host test
+    make verify-user_gpio                      - standalone user gpio test
+    make verify-user_aes                       - standalone aes test with risc core-0
+    make verify-user_cache_bypass              - standalone icache and dcache bypass test with risc core-0
+    make verify-user_uart_master               - standalone user uart master test
+    make verify-user_sram_exec                 - standalone riscv core-0 test with executing code from data memory
+    make verify-riscv_regress                  - standalone riscv compliance test suite
+    make verify-arudino_risc_boot              - standalone riscv core-0 boot using arduino tool set
+    make verify-arudino_hello_world            - standalone riscv core-0 hello world test using arduino tool set
+
+   
+    make verify-user_uart SIM=RTL DUMP=OFF     - Standalone user uart-0 test using user risc core with waveform dump off
+    make verify-user_uart SIM=RTL DUMP=ON      - Standalone user uart-0 test using user risc core with waveform dump on
+    make verify-user_uart SIM=GL DUMP=OFF      - Standalone user uart-0 test using user risc core with gatelevel netlist
+    make verify-user_uart SIM=GL DUMP=ON       - Standalone user uart-0 test using user risc core with gatelevel netlist and waveform on
+
 ```
 # Running RTL to GDS flows
    - First run the individual macro file
diff --git a/docs/source/_static/Riscduino_Integration.png b/docs/source/_static/Riscduino_Integration.png
new file mode 100644
index 0000000..a30009c
--- /dev/null
+++ b/docs/source/_static/Riscduino_Integration.png
Binary files differ
diff --git a/verilog/dv/Makefile b/verilog/dv/Makefile
index c3bdba4..1d9627d 100644
--- a/verilog/dv/Makefile
+++ b/verilog/dv/Makefile
@@ -19,7 +19,7 @@
 .SUFFIXES:
 .SILENT: clean all
 
-PATTERNS = wb_port risc_boot user_risc_boot user_uart user_uart1 user_qspi user_i2cm riscv_regress user_basic user_usb user_pwm user_timer user_uart_master uart_master user_sram_exec user_cache_bypass user_gpio
+PATTERNS = wb_port risc_boot user_risc_boot user_uart user_uart1 user_qspi user_i2cm riscv_regress user_basic user_usb user_pwm user_timer user_uart_master uart_master user_sram_exec user_cache_bypass user_gpio arduino_risc_boot arduino_hello_world arduino_ascii_table arduino_multi_serial
 
 all:  ${PATTERNS}
 	for i in ${PATTERNS}; do \
diff --git a/verilog/dv/arduino_ascii_table/Makefile b/verilog/dv/arduino_ascii_table/Makefile
new file mode 100644
index 0000000..30b4cfe
--- /dev/null
+++ b/verilog/dv/arduino_ascii_table/Makefile
@@ -0,0 +1,140 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+ 
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv32i/
+
+export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
+export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arduino_ascii_table
+
+all:  ${PATTERN:=.vcd}
+
+
+vvp:  ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+	${GCC_PREFIX}-ar rcs core.a Print.cpp.o
+	${GCC_PREFIX}-ar rcs core.a UARTClass.cpp.o
+	${GCC_PREFIX}-ar rcs core.a WInterrupts.c.o
+	${GCC_PREFIX}-ar rcs core.a WMath.cpp.o
+	${GCC_PREFIX}-ar rcs core.a WString.cpp.o
+	${GCC_PREFIX}-ar rcs core.a abi.cpp.o
+	${GCC_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+	${GCC_PREFIX}-ar rcs core.a plic_driver.c.o
+	${GCC_PREFIX}-ar rcs core.a entry.S.o
+	${GCC_PREFIX}-ar rcs core.a hooks.c.o
+	${GCC_PREFIX}-ar rcs core.a init.S.o
+	${GCC_PREFIX}-ar rcs core.a itoa.c.o
+	${GCC_PREFIX}-ar rcs core.a main.cpp.o
+	${GCC_PREFIX}-ar rcs core.a malloc.c.o
+	${GCC_PREFIX}-ar rcs core.a new.cpp.o
+	${GCC_PREFIX}-ar rcs core.a sbrk.c.o
+	${GCC_PREFIX}-ar rcs core.a start.S.o
+	${GCC_PREFIX}-ar rcs core.a wiring.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_analog.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+	${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
+	${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
+	${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
+	${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
+	${GCC_PREFIX}-objdump -D  ${PATTERN}.ino.elf >   ${PATTERN}.ino.dump
+	rm *.o *.a
+ifeq ($(SIM),RTL)
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+   endif
+else  
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+   endif
+endif
+
+%.vcd: %.vvp
+	vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arduino_ascii_table/arduino_ascii_table.ino b/verilog/dv/arduino_ascii_table/arduino_ascii_table.ino
new file mode 100644
index 0000000..aa871e7
--- /dev/null
+++ b/verilog/dv/arduino_ascii_table/arduino_ascii_table.ino
@@ -0,0 +1,77 @@
+/*
+  ASCII table
+
+  Prints out byte values in all possible formats:
+  - as raw binary values
+  - as ASCII-encoded decimal, hex, octal, and binary values
+
+  For more on ASCII, see http://www.asciitable.com and http://en.wikipedia.org/wiki/ASCII
+
+  The circuit: No external hardware needed.
+
+  created 2006
+  by Nicholas Zambetti <http://www.zambetti.com>
+  modified 9 Apr 2012
+  by Tom Igoe
+
+  This example code is in the public domain.
+
+  https://www.arduino.cc/en/Tutorial/BuiltInExamples/ASCIITable
+*/
+
+void setup() {
+  //Initialize serial and wait for port to open:
+  Serial.begin(230400);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  // prints title with ending line break
+  Serial.println("ASCII Table ~ Character Map");
+}
+
+// first visible ASCIIcharacter '!' is number 33:
+int thisByte = 33;
+// you can also write ASCII characters in single quotes.
+// for example, '!' is the same as 33, so you could also use this:
+// int thisByte = '!';
+
+void loop() {
+  // prints value unaltered, i.e. the raw binary version of the byte.
+  // The Serial Monitor interprets all bytes as ASCII, so 33, the first number,
+  // will show up as '!'
+  Serial.write(thisByte);
+
+  Serial.print(", dec: ");
+  // prints value as string as an ASCII-encoded decimal (base 10).
+  // Decimal is the default format for Serial.print() and Serial.println(),
+  // so no modifier is needed:
+  Serial.print(thisByte);
+  // But you can declare the modifier for decimal if you want to.
+  // this also works if you uncomment it:
+
+  // Serial.print(thisByte, DEC);
+
+
+  Serial.print(", hex: ");
+  // prints value as string in hexadecimal (base 16):
+  Serial.print(thisByte, HEX);
+
+  Serial.print(", oct: ");
+  // prints value as string in octal (base 8);
+  Serial.print(thisByte, OCT);
+
+  Serial.print(", bin: ");
+  // prints value as string in binary (base 2) also prints ending line break:
+  Serial.println(thisByte, BIN);
+
+  // if printed last visible character '~' or 126, stop:
+  if (thisByte == 126) {    // you could also use if (thisByte == '~') {
+    // This loop loops forever and does nothing
+    while (true) {
+      continue;
+    }
+  }
+  // go on to the next character
+  thisByte++;
+}
diff --git a/verilog/dv/arduino_ascii_table/arduino_ascii_table.ino.cpp b/verilog/dv/arduino_ascii_table/arduino_ascii_table.ino.cpp
new file mode 100644
index 0000000..07a49d4
--- /dev/null
+++ b/verilog/dv/arduino_ascii_table/arduino_ascii_table.ino.cpp
@@ -0,0 +1,85 @@
+#include <Arduino.h>
+#line 1 "/tmp/.arduinoIDE-unsaved202265-51666-197w8ma.2pxu/ASCIITable/ASCIITable.ino"
+/*
+  ASCII table
+
+  Prints out byte values in all possible formats:
+  - as raw binary values
+  - as ASCII-encoded decimal, hex, octal, and binary values
+
+  For more on ASCII, see http://www.asciitable.com and http://en.wikipedia.org/wiki/ASCII
+
+  The circuit: No external hardware needed.
+
+  created 2006
+  by Nicholas Zambetti <http://www.zambetti.com>
+  modified 9 Apr 2012
+  by Tom Igoe
+
+  This example code is in the public domain.
+
+  https://www.arduino.cc/en/Tutorial/BuiltInExamples/ASCIITable
+*/
+
+#line 22 "/tmp/.arduinoIDE-unsaved202265-51666-197w8ma.2pxu/ASCIITable/ASCIITable.ino"
+void setup();
+#line 39 "/tmp/.arduinoIDE-unsaved202265-51666-197w8ma.2pxu/ASCIITable/ASCIITable.ino"
+void loop();
+#line 22 "/tmp/.arduinoIDE-unsaved202265-51666-197w8ma.2pxu/ASCIITable/ASCIITable.ino"
+// first visible ASCIIcharacter '!' is number 33:
+int thisByte = 33;
+void setup() {
+  //Initialize serial and wait for port to open:
+  Serial.begin(1152000);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  // prints title with ending line break
+  Serial.println("ASCII Table ~ Character Map");
+}
+
+// you can also write ASCII characters in single quotes.
+// for example, '!' is the same as 33, so you could also use this:
+// int thisByte = '!';
+
+void loop() {
+  // prints value unaltered, i.e. the raw binary version of the byte.
+  // The Serial Monitor interprets all bytes as ASCII, so 33, the first number,
+  // will show up as '!'
+  Serial.write(thisByte);
+
+  Serial.print(", dec: ");
+  // prints value as string as an ASCII-encoded decimal (base 10).
+  // Decimal is the default format for Serial.print() and Serial.println(),
+  // so no modifier is needed:
+  Serial.print(thisByte);
+  // But you can declare the modifier for decimal if you want to.
+  // this also works if you uncomment it:
+
+  // Serial.print(thisByte, DEC);
+
+
+  Serial.print(", hex: ");
+  // prints value as string in hexadecimal (base 16):
+  Serial.print(thisByte, HEX);
+
+  Serial.print(", oct: ");
+  // prints value as string in octal (base 8);
+  Serial.print(thisByte, OCT);
+
+  Serial.print(", bin: ");
+  // prints value as string in binary (base 2) also prints ending line break:
+  Serial.println(thisByte, BIN);
+
+  // if printed last visible character '~' or 126, stop:
+  if (thisByte == 126) {    // you could also use if (thisByte == '~') {
+    // This loop loops forever and does nothing
+    while (true) {
+      continue;
+    }
+  }
+  // go on to the next character
+  thisByte++;
+}
+
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v b/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v
similarity index 67%
copy from verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
copy to verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v
index 96a034d..af4e082 100644
--- a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
+++ b/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v
@@ -75,7 +75,9 @@
 `timescale 1 ns / 1 ns
 
 `include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
-module arudino_risc_boot_tb;
+`include "uart_agent.v"
+
+module arduino_ascii_table_tb;
 	reg clock;
 	reg wb_rst_i;
 	reg power1, power2;
@@ -102,17 +104,40 @@
 	wire [7:0] mprj_io_0;
 	reg         test_fail;
 	reg [31:0] read_data;
+        //----------------------------------
+        // Uart Configuration
+        // ---------------------------------
+        reg [1:0]      uart_data_bit        ;
+        reg	       uart_stop_bits       ; // 0: 1 stop bit; 1: 2 stop bit;
+        reg	       uart_stick_parity    ; // 1: force even parity
+        reg	       uart_parity_en       ; // parity enable
+        reg	       uart_even_odd_parity ; // 0: odd parity; 1: even parity
+        
+        reg [7:0]      uart_data            ;
+        reg [15:0]     uart_divisor         ;	// divided by n * 16
+        reg [15:0]     uart_timeout         ;// wait time limit
+        
+        reg [15:0]     uart_rx_nu           ;
+        reg [15:0]     uart_tx_nu           ;
+        reg [7:0]      uart_write_data [0:39];
+        reg 	       uart_fifo_enable     ;	// fifo mode disable
+	reg            flag                 ;
+
+	reg [31:0]     check_sum            ;
+        
+	integer    d_risc_id;
+
+         integer i,j;
 
 
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
 
-	always #12.5 clock <= (clock === 1'b0);
+	// 50Mhz CLock
+	always #10 clock <= (clock === 1'b0);
 
 	initial begin
 		clock = 0;
+	        flag  = 0;
                 wbd_ext_cyc_i ='h0;  // strobe/request
                 wbd_ext_stb_i ='h0;  // strobe/request
                 wbd_ext_adr_i ='h0;  // address
@@ -124,11 +149,55 @@
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
-	   	$dumpvars(3, arudino_risc_boot_tb);
+	   	$dumpvars(3, arduino_ascii_table_tb);
+	   	$dumpvars(0, arduino_ascii_table_tb.u_top.u_riscv_top.i_core_top_0);
+	   	$dumpvars(0, arduino_ascii_table_tb.u_top.u_riscv_top.u_connect);
+	   	$dumpvars(0, arduino_ascii_table_tb.u_top.u_riscv_top.u_intf);
+	   	$dumpvars(0, arduino_ascii_table_tb.u_top.u_uart_i2c_usb_spi.u_uart0_core);
 	   end
        `endif
 
+       /*************************************************************************
+       * This is Baud Rate to clock divider conversion for Test Bench
+       * Note: DUT uses 16x baud clock, where are test bench uses directly
+       * baud clock, Due to 16x Baud clock requirement at RTL, there will be
+       * some resolution loss, we expect at lower baud rate this resolution
+       * loss will be less. For Quick simulation perpose higher baud rate used
+       * *************************************************************************/
+       task tb_set_uart_baud;
+       input [31:0] ref_clk;
+       input [31:0] baud_rate;
+       output [31:0] baud_div;
+       reg   [31:0] baud_div;
+       begin
+	  // for 230400 Baud = (50Mhz/230400) = 216.7
+	  baud_div = ref_clk/baud_rate; // Get the Bit Baud rate
+	  // Baud 16x = 216/16 = 13
+          baud_div = baud_div/16; // To find the RTL baud 16x div value to find similar resolution loss in test bench
+	  // Test bench baud clock , 16x of above value
+	  // 13 * 16 = 208,  
+	  // (Note if you see original value was 216, now it's 208 )
+          baud_div = baud_div * 16;
+	  // Test bench half cycle counter to toggle it 
+	  // 208/2 = 104
+           baud_div = baud_div/2;
+	  //As counter run's from 0 , substract from 1
+	   baud_div = baud_div-1;
+       end
+       endtask
+       
+
 	initial begin
+               uart_data_bit           = 2'b11;
+               uart_stop_bits          = 0; // 0: 1 stop bit; 1: 2 stop bit;
+               uart_stick_parity       = 0; // 1: force even parity
+               uart_parity_en          = 0; // parity enable
+               uart_even_odd_parity    = 1; // 0: odd parity; 1: even parity
+	       tb_set_uart_baud(50000000,1152000,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
+               uart_timeout            = 2000;// wait time limit
+               uart_fifo_enable        = 0;	// fifo mode disable
+
+		$value$plusargs("risc_core_id=%d", d_risc_id);
 
 		#200; // Wait for reset removal
 	        repeat (10) @(posedge clock);
@@ -139,49 +208,75 @@
 
 	        repeat (2) @(posedge clock);
 		#1;
-		// Remove all the reset
-                wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+                // Remove all the reset
+                if(d_risc_id == 0) begin
+                     $display("STATUS: Working with Risc core 0");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+                end else if(d_risc_id == 1) begin
+                     $display("STATUS: Working with Risc core 1");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h21F);
+                end else if(d_risc_id == 2) begin
+                     $display("STATUS: Working with Risc core 2");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h41F);
+                end else if(d_risc_id == 3) begin
+                     $display("STATUS: Working with Risc core 3");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h81F);
+                end
 
+                repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
-		// Repeat cycles of 1000 clock edges as needed to complete testbench
-		repeat (30) begin
-			repeat (1000) @(posedge clock);
-			// $display("+1000 cycles");
-		end
+	        tb_uart.debug_mode = 0; // disable debug display
+                tb_uart.uart_init;
+                tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
+                                               uart_stick_parity, uart_timeout, uart_divisor);
 
+                repeat (45000) @(posedge clock);  // wait for Processor Get Ready
+	        flag  = 0;
+		check_sum = 0;
+                
+                
+                fork
+                   begin
+                      while(flag == 0)
+                      begin
+                         tb_uart.read_char(read_data,flag);
+			 if(flag == 0)  begin
+			    $write ("%c",read_data);
+			    check_sum = check_sum+read_data;
+		         end
+                      end
+                   end
+                   begin
+                      repeat (3000000) @(posedge clock);  // wait for Processor Get Ready
+                   end
+                   join_any
+                
+                   #100
+                   tb_uart.report_status(uart_rx_nu, uart_tx_nu);
+                
+                   test_fail = 0;
 
-		$display("Monitor: Reading Back the expected value");
-		// User RISC core expect to write these value in global
-		// register, read back and decide on pass fail
-		// 0x30000018  = 0x11223344; 
-                // 0x3000001C  = 0x22334455; 
-                // 0x30000020  = 0x33445566; 
-                // 0x30000024  = 0x44556677; 
-                // 0x30000028 = 0x55667788; 
-                // 0x3000002C = 0x66778899; 
-
-                test_fail = 0;
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data,32'h11223344);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h22334455);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h33445566);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,read_data,32'h44556677);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,read_data,32'h55667788);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,read_data,32'h66778899);
-
+		   $display("Total Rx Char: %d Check Sum : %x ",uart_rx_nu, check_sum);
+                   // Check 
+                   // if all the 4224 byte received
+                   // if no error 
+                   if(uart_rx_nu != 4224) test_fail = 1;
+                   if(check_sum != 32'h3f01b) test_fail = 1;
+                   if(tb_uart.err_cnt != 0) test_fail = 1;
 
 	   
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
+	    	       $display("Monitor: Standalone Hello World (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
+		       $display("Monitor: Standalone Hello World (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
+	    	        $display("Monitor: Standalone Hello World (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
+		        $display("Monitor: Standalone Hello World (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
@@ -261,7 +356,7 @@
    assign io_in[32] = flash_io3;
 
    // Quard flash
-     s25fl256s #(.mem_file_name("arudino_risc_boot.ino.hex"),
+     s25fl256s #(.mem_file_name("arduino_ascii_table.ino.hex"),
 	         .otp_file_name("none"),
                  .TimingModel("S25FL512SAGMFI010_F_30pF")) 
 		 u_spi_flash_256mb (
@@ -278,6 +373,19 @@
        );
 
 
+//---------------------------
+//  UART Agent integration
+// --------------------------
+wire uart_txd,uart_rxd;
+
+assign uart_txd   = io_out[2];
+assign io_in[1]  = uart_rxd ;
+ 
+uart_agent tb_uart(
+	.mclk                (clock              ),
+	.txd                 (uart_rxd           ),
+	.rxd                 (uart_txd           )
+	);
 
 
 task wb_user_core_write;
diff --git a/verilog/dv/arduino_hello_world/Makefile b/verilog/dv/arduino_hello_world/Makefile
new file mode 100644
index 0000000..3eed1a1
--- /dev/null
+++ b/verilog/dv/arduino_hello_world/Makefile
@@ -0,0 +1,139 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+ 
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv32i/
+
+export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
+export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arduino_hello_world
+
+all:  ${PATTERN:=.vcd}
+
+
+vvp:  ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+	${GCC_PREFIX}-ar rcs core.a Print.cpp.o
+	${GCC_PREFIX}-ar rcs core.a UARTClass.cpp.o
+	${GCC_PREFIX}-ar rcs core.a WInterrupts.c.o
+	${GCC_PREFIX}-ar rcs core.a WMath.cpp.o
+	${GCC_PREFIX}-ar rcs core.a WString.cpp.o
+	${GCC_PREFIX}-ar rcs core.a abi.cpp.o
+	${GCC_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+	${GCC_PREFIX}-ar rcs core.a plic_driver.c.o
+	${GCC_PREFIX}-ar rcs core.a entry.S.o
+	${GCC_PREFIX}-ar rcs core.a hooks.c.o
+	${GCC_PREFIX}-ar rcs core.a init.S.o
+	${GCC_PREFIX}-ar rcs core.a itoa.c.o
+	${GCC_PREFIX}-ar rcs core.a main.cpp.o
+	${GCC_PREFIX}-ar rcs core.a malloc.c.o
+	${GCC_PREFIX}-ar rcs core.a new.cpp.o
+	${GCC_PREFIX}-ar rcs core.a sbrk.c.o
+	${GCC_PREFIX}-ar rcs core.a start.S.o
+	${GCC_PREFIX}-ar rcs core.a wiring.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_analog.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+	${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
+	${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
+	${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
+	${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
+	${GCC_PREFIX}-objdump -D  ${PATTERN}.ino.elf >   ${PATTERN}.ino.dump
+	rm *.o *.a
+ifeq ($(SIM),RTL)
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+   endif
+else  
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+   endif
+endif
+
+%.vcd: %.vvp
+	vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arduino_hello_world/arduino_hello_world.ino b/verilog/dv/arduino_hello_world/arduino_hello_world.ino
new file mode 100644
index 0000000..1d269b0
--- /dev/null
+++ b/verilog/dv/arduino_hello_world/arduino_hello_world.ino
@@ -0,0 +1,6 @@
+void setup() {
+   Serial.begin(230400);
+   Serial.print("Hello World!");
+}
+void loop() {
+}
diff --git a/verilog/dv/arduino_hello_world/arduino_hello_world.ino.cpp b/verilog/dv/arduino_hello_world/arduino_hello_world.ino.cpp
new file mode 100644
index 0000000..44bef6c
--- /dev/null
+++ b/verilog/dv/arduino_hello_world/arduino_hello_world.ino.cpp
@@ -0,0 +1,11 @@
+#include <Arduino.h>
+void setup();
+void loop();
+void setup() {
+   Serial.begin(230400);
+   Serial.print("Hello World!");
+}
+void loop() {
+}
+
+
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v b/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v
similarity index 66%
copy from verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
copy to verilog/dv/arduino_hello_world/arduino_hello_world_tb.v
index 96a034d..051b224 100644
--- a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
+++ b/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v
@@ -75,7 +75,9 @@
 `timescale 1 ns / 1 ns
 
 `include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
-module arudino_risc_boot_tb;
+`include "uart_agent.v"
+
+module arduino_hello_world_tb;
 	reg clock;
 	reg wb_rst_i;
 	reg power1, power2;
@@ -102,17 +104,38 @@
 	wire [7:0] mprj_io_0;
 	reg         test_fail;
 	reg [31:0] read_data;
+        //----------------------------------
+        // Uart Configuration
+        // ---------------------------------
+        reg [1:0]      uart_data_bit        ;
+        reg	       uart_stop_bits       ; // 0: 1 stop bit; 1: 2 stop bit;
+        reg	       uart_stick_parity    ; // 1: force even parity
+        reg	       uart_parity_en       ; // parity enable
+        reg	       uart_even_odd_parity ; // 0: odd parity; 1: even parity
+        
+        reg [7:0]      uart_data            ;
+        reg [15:0]     uart_divisor         ;	// divided by n * 16
+        reg [15:0]     uart_timeout         ;// wait time limit
+        
+        reg [15:0]     uart_rx_nu           ;
+        reg [15:0]     uart_tx_nu           ;
+        reg [7:0]      uart_write_data [0:39];
+        reg 	       uart_fifo_enable     ;	// fifo mode disable
+	reg            flag                 ;
+        
+	integer    d_risc_id;
+
+         integer i,j;
 
 
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
 
-	always #12.5 clock <= (clock === 1'b0);
+	// 50Mhz CLock
+	always #10 clock <= (clock === 1'b0);
 
 	initial begin
 		clock = 0;
+	        flag  = 0;
                 wbd_ext_cyc_i ='h0;  // strobe/request
                 wbd_ext_stb_i ='h0;  // strobe/request
                 wbd_ext_adr_i ='h0;  // address
@@ -124,11 +147,55 @@
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
-	   	$dumpvars(3, arudino_risc_boot_tb);
+	   	$dumpvars(3, arduino_hello_world_tb);
+	   	//$dumpvars(0, arduino_hello_world_tb.u_top.u_riscv_top.i_core_top_0);
+	   	//$dumpvars(0, arduino_hello_world_tb.u_top.u_riscv_top.u_connect);
+	   	//$dumpvars(0, arduino_hello_world_tb.u_top.u_riscv_top.u_intf);
+	   	$dumpvars(0, arduino_hello_world_tb.u_top.u_uart_i2c_usb_spi.u_uart0_core);
 	   end
        `endif
 
+       /*************************************************************************
+       * This is Baud Rate to clock divider conversion for Test Bench
+       * Note: DUT uses 16x baud clock, where are test bench uses directly
+       * baud clock, Due to 16x Baud clock requirement at RTL, there will be
+       * some resolution loss, we expect at lower baud rate this resolution
+       * loss will be less. For Quick simulation perpose higher baud rate used
+       * *************************************************************************/
+       task tb_set_uart_baud;
+       input [31:0] ref_clk;
+       input [31:0] baud_rate;
+       output [31:0] baud_div;
+       reg   [31:0] baud_div;
+       begin
+	  // for 230400 Baud = (50Mhz/230400) = 216.7
+	  baud_div = ref_clk/baud_rate; // Get the Bit Baud rate
+	  // Baud 16x = 216/16 = 13
+          baud_div = baud_div/16; // To find the RTL baud 16x div value to find similar resolution loss in test bench
+	  // Test bench baud clock , 16x of above value
+	  // 13 * 16 = 208,  
+	  // (Note if you see original value was 216, now it's 208 )
+          baud_div = baud_div * 16;
+	  // Test bench half cycle counter to toggle it 
+	  // 208/2 = 104
+           baud_div = baud_div/2;
+	  //As counter run's from 0 , substract from 1
+	   baud_div = baud_div-1;
+       end
+       endtask
+       
+
 	initial begin
+               uart_data_bit           = 2'b11;
+               uart_stop_bits          = 0; // 0: 1 stop bit; 1: 2 stop bit;
+               uart_stick_parity       = 0; // 1: force even parity
+               uart_parity_en          = 0; // parity enable
+               uart_even_odd_parity    = 1; // 0: odd parity; 1: even parity
+	       tb_set_uart_baud(50000000,230400,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
+               uart_timeout            = 2000;// wait time limit
+               uart_fifo_enable        = 0;	// fifo mode disable
+
+		$value$plusargs("risc_core_id=%d", d_risc_id);
 
 		#200; // Wait for reset removal
 	        repeat (10) @(posedge clock);
@@ -139,49 +206,78 @@
 
 	        repeat (2) @(posedge clock);
 		#1;
-		// Remove all the reset
-                wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+                // Remove all the reset
+                if(d_risc_id == 0) begin
+                     $display("STATUS: Working with Risc core 0");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+                end else if(d_risc_id == 1) begin
+                     $display("STATUS: Working with Risc core 1");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h21F);
+                end else if(d_risc_id == 2) begin
+                     $display("STATUS: Working with Risc core 2");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h41F);
+                end else if(d_risc_id == 3) begin
+                     $display("STATUS: Working with Risc core 3");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h81F);
+                end
 
+                repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
-		// Repeat cycles of 1000 clock edges as needed to complete testbench
-		repeat (30) begin
-			repeat (1000) @(posedge clock);
-			// $display("+1000 cycles");
-		end
+                tb_uart.uart_init;
+                tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
+                                               uart_stick_parity, uart_timeout, uart_divisor);
 
+                repeat (45000) @(posedge clock);  // wait for Processor Get Ready
+	        flag  = 1;
+                
+                
+                uart_write_data[0]  = "H";
+                uart_write_data[1]  = "e";
+                uart_write_data[2]  = "l";
+                uart_write_data[3]  = "l";
+                uart_write_data[4]  = "o";
+                uart_write_data[5]  = " ";
+                uart_write_data[6]  = "W";
+                uart_write_data[7]  = "o";
+                uart_write_data[8]  = "r";
+                uart_write_data[9]  = "l";
+                uart_write_data[10] = "d";
+                uart_write_data[11] = "!";
+                
+                
+                fork
+                   begin
+                      for (j=0; j<12; j=j+1)
+                      begin
+                        tb_uart.read_char_chk(uart_write_data[j]);
+                      end
+                   end
+                   join
+                
+                   #100
+                   tb_uart.report_status(uart_rx_nu, uart_tx_nu);
+                
+                   test_fail = 0;
 
-		$display("Monitor: Reading Back the expected value");
-		// User RISC core expect to write these value in global
-		// register, read back and decide on pass fail
-		// 0x30000018  = 0x11223344; 
-                // 0x3000001C  = 0x22334455; 
-                // 0x30000020  = 0x33445566; 
-                // 0x30000024  = 0x44556677; 
-                // 0x30000028 = 0x55667788; 
-                // 0x3000002C = 0x66778899; 
-
-                test_fail = 0;
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data,32'h11223344);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h22334455);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h33445566);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,read_data,32'h44556677);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,read_data,32'h55667788);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,read_data,32'h66778899);
-
+                   // Check 
+                   // if all the 12 byte received
+                   // if no error 
+                   if(uart_rx_nu != 12) test_fail = 1;
+                   if(tb_uart.err_cnt != 0) test_fail = 1;
 
 	   
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
+	    	       $display("Monitor: Standalone Hello World (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
+		       $display("Monitor: Standalone Hello World (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
+	    	        $display("Monitor: Standalone Hello World (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
+		        $display("Monitor: Standalone Hello World (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
@@ -261,7 +357,7 @@
    assign io_in[32] = flash_io3;
 
    // Quard flash
-     s25fl256s #(.mem_file_name("arudino_risc_boot.ino.hex"),
+     s25fl256s #(.mem_file_name("arduino_hello_world.ino.hex"),
 	         .otp_file_name("none"),
                  .TimingModel("S25FL512SAGMFI010_F_30pF")) 
 		 u_spi_flash_256mb (
@@ -278,6 +374,19 @@
        );
 
 
+//---------------------------
+//  UART Agent integration
+// --------------------------
+wire uart_txd,uart_rxd;
+
+assign uart_txd   = io_out[2];
+assign io_in[1]  = uart_rxd ;
+ 
+uart_agent tb_uart(
+	.mclk                (clock              ),
+	.txd                 (uart_rxd           ),
+	.rxd                 (uart_txd           )
+	);
 
 
 task wb_user_core_write;
diff --git a/verilog/dv/arduino_multi_serial/Makefile b/verilog/dv/arduino_multi_serial/Makefile
new file mode 100644
index 0000000..8c1fa01
--- /dev/null
+++ b/verilog/dv/arduino_multi_serial/Makefile
@@ -0,0 +1,140 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+ 
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv32i/
+
+export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
+export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arduino_multi_serial
+
+all:  ${PATTERN:=.vcd}
+
+
+vvp:  ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+	${GCC_PREFIX}-ar rcs core.a Print.cpp.o
+	${GCC_PREFIX}-ar rcs core.a UARTClass.cpp.o
+	${GCC_PREFIX}-ar rcs core.a WInterrupts.c.o
+	${GCC_PREFIX}-ar rcs core.a WMath.cpp.o
+	${GCC_PREFIX}-ar rcs core.a WString.cpp.o
+	${GCC_PREFIX}-ar rcs core.a abi.cpp.o
+	${GCC_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+	${GCC_PREFIX}-ar rcs core.a plic_driver.c.o
+	${GCC_PREFIX}-ar rcs core.a entry.S.o
+	${GCC_PREFIX}-ar rcs core.a hooks.c.o
+	${GCC_PREFIX}-ar rcs core.a init.S.o
+	${GCC_PREFIX}-ar rcs core.a itoa.c.o
+	${GCC_PREFIX}-ar rcs core.a main.cpp.o
+	${GCC_PREFIX}-ar rcs core.a malloc.c.o
+	${GCC_PREFIX}-ar rcs core.a new.cpp.o
+	${GCC_PREFIX}-ar rcs core.a sbrk.c.o
+	${GCC_PREFIX}-ar rcs core.a start.S.o
+	${GCC_PREFIX}-ar rcs core.a wiring.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_analog.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+	${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
+	${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
+	${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
+	${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
+	${GCC_PREFIX}-objdump -D  ${PATTERN}.ino.elf >   ${PATTERN}.ino.dump
+	rm *.o *.a
+ifeq ($(SIM),RTL)
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+   endif
+else  
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+   endif
+endif
+
+%.vcd: %.vvp
+	vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arduino_multi_serial/arduino_multi_serial.ino b/verilog/dv/arduino_multi_serial/arduino_multi_serial.ino
new file mode 100644
index 0000000..20fc441
--- /dev/null
+++ b/verilog/dv/arduino_multi_serial/arduino_multi_serial.ino
@@ -0,0 +1,43 @@
+/*
+  Multiple Serial test
+
+  Receives from the main serial port, sends to the others.
+  Receives from serial port 1, sends to the main serial (Serial 0).
+
+  This example works only with boards with more than one serial like Arduino Mega, Due, Zero etc.
+
+  The circuit:
+  - any serial device attached to Serial port 1
+  - Serial Monitor open on Serial port 0
+
+  created 30 Dec 2008
+  modified 20 May 2012
+  by Tom Igoe & Jed Roach
+  modified 27 Nov 2015
+  by Arturo Guadalupi
+
+  This example code is in the public domain.
+
+  https://www.arduino.cc/en/Tutorial/BuiltInExamples/MultiSerialMega
+*/
+
+
+void setup() {
+  // initialize both serial ports:
+  Serial.begin(9600);
+  Serial1.begin(9600);
+}
+
+void loop() {
+  // read from port 1, send to port 0:
+  if (Serial1.available()) {
+    int inByte = Serial1.read();
+    Serial.write(inByte);
+  }
+
+  // read from port 0, send to port 1:
+  if (Serial.available()) {
+    int inByte = Serial.read();
+    Serial1.write(inByte);
+  }
+}
diff --git a/verilog/dv/arduino_multi_serial/arduino_multi_serial.ino.cpp b/verilog/dv/arduino_multi_serial/arduino_multi_serial.ino.cpp
new file mode 100644
index 0000000..c857650
--- /dev/null
+++ b/verilog/dv/arduino_multi_serial/arduino_multi_serial.ino.cpp
@@ -0,0 +1,51 @@
+#include <Arduino.h>
+#line 1 "/tmp/.arduinoIDE-unsaved202266-51666-8e7jjt.yj22m/MultiSerial/MultiSerial.ino"
+/*
+  Multiple Serial test
+
+  Receives from the main serial port, sends to the others.
+  Receives from serial port 1, sends to the main serial (Serial 0).
+
+  This example works only with boards with more than one serial like Arduino Mega, Due, Zero etc.
+
+  The circuit:
+  - any serial device attached to Serial port 1
+  - Serial Monitor open on Serial port 0
+
+  created 30 Dec 2008
+  modified 20 May 2012
+  by Tom Igoe & Jed Roach
+  modified 27 Nov 2015
+  by Arturo Guadalupi
+
+  This example code is in the public domain.
+
+  https://www.arduino.cc/en/Tutorial/BuiltInExamples/MultiSerialMega
+*/
+
+
+#line 25 "/tmp/.arduinoIDE-unsaved202266-51666-8e7jjt.yj22m/MultiSerial/MultiSerial.ino"
+void setup();
+#line 31 "/tmp/.arduinoIDE-unsaved202266-51666-8e7jjt.yj22m/MultiSerial/MultiSerial.ino"
+void loop();
+#line 25 "/tmp/.arduinoIDE-unsaved202266-51666-8e7jjt.yj22m/MultiSerial/MultiSerial.ino"
+void setup() {
+  // initialize both serial ports:
+  Serial.begin(288000);
+  Serial1.begin(288000);
+}
+
+void loop() {
+  // read from port 1, send to port 0:
+  if (Serial1.available()) {
+    int inByte = Serial1.read();
+    Serial.write(inByte);
+  }
+
+  // read from port 0, send to port 1:
+  if (Serial.available()) {
+    int inByte = Serial.read();
+    Serial1.write(inByte);
+  }
+}
+
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v b/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v
similarity index 62%
copy from verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
copy to verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v
index 96a034d..f0cf862 100644
--- a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
+++ b/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v
@@ -75,7 +75,9 @@
 `timescale 1 ns / 1 ns
 
 `include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
-module arudino_risc_boot_tb;
+`include "uart_agent.v"
+
+module arduino_multi_serial_tb;
 	reg clock;
 	reg wb_rst_i;
 	reg power1, power2;
@@ -102,17 +104,41 @@
 	wire [7:0] mprj_io_0;
 	reg         test_fail;
 	reg [31:0] read_data;
+        //----------------------------------
+        // Uart Configuration
+        // ---------------------------------
+        reg [1:0]      uart_data_bit        ;
+        reg	       uart_stop_bits       ; // 0: 1 stop bit; 1: 2 stop bit;
+        reg	       uart_stick_parity    ; // 1: force even parity
+        reg	       uart_parity_en       ; // parity enable
+        reg	       uart_even_odd_parity ; // 0: odd parity; 1: even parity
+        
+        reg [7:0]      uart_data            ;
+        reg [15:0]     uart_divisor         ;	// divided by n * 16
+        reg [15:0]     uart_timeout         ;// wait time limit
+        
+        reg [15:0]     uart_rx_nu           ;
+        reg [15:0]     uart_tx_nu           ;
+        reg [7:0]      uart0_write_data [0:39];
+        reg [7:0]      uart1_write_data [0:39];
+        reg 	       uart_fifo_enable     ;	// fifo mode disable
+	reg            flag                 ;
+
+	reg [31:0]     check_sum            ;
+        
+	integer    d_risc_id;
+
+         integer i,j,k,l;
 
 
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
 
-	always #12.5 clock <= (clock === 1'b0);
+	// 50Mhz CLock
+	always #10 clock <= (clock === 1'b0);
 
 	initial begin
 		clock = 0;
+	        flag  = 0;
                 wbd_ext_cyc_i ='h0;  // strobe/request
                 wbd_ext_stb_i ='h0;  // strobe/request
                 wbd_ext_adr_i ='h0;  // address
@@ -124,11 +150,56 @@
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
-	   	$dumpvars(3, arudino_risc_boot_tb);
+	   	$dumpvars(3, arduino_multi_serial_tb);
+	   	//$dumpvars(0, arduino_multi_serial_tb.u_top.u_riscv_top.i_core_top_0);
+	   	//$dumpvars(0, arduino_multi_serial_tb.u_top.u_riscv_top.u_connect);
+	   	//$dumpvars(0, arduino_multi_serial_tb.u_top.u_riscv_top.u_intf);
+	   	$dumpvars(0, arduino_multi_serial_tb.u_top.u_uart_i2c_usb_spi.u_uart0_core);
+	   	$dumpvars(0, arduino_multi_serial_tb.u_top.u_uart_i2c_usb_spi.u_uart1_core);
 	   end
        `endif
 
+       /*************************************************************************
+       * This is Baud Rate to clock divider conversion for Test Bench
+       * Note: DUT uses 16x baud clock, where are test bench uses directly
+       * baud clock, Due to 16x Baud clock requirement at RTL, there will be
+       * some resolution loss, we expect at lower baud rate this resolution
+       * loss will be less. For Quick simulation perpose higher baud rate used
+       * *************************************************************************/
+       task tb_set_uart_baud;
+       input [31:0] ref_clk;
+       input [31:0] baud_rate;
+       output [31:0] baud_div;
+       reg   [31:0] baud_div;
+       begin
+	  // for 230400 Baud = (50Mhz/230400) = 216.7
+	  baud_div = ref_clk/baud_rate; // Get the Bit Baud rate
+	  // Baud 16x = 216/16 = 13
+          baud_div = baud_div/16; // To find the RTL baud 16x div value to find similar resolution loss in test bench
+	  // Test bench baud clock , 16x of above value
+	  // 13 * 16 = 208,  
+	  // (Note if you see original value was 216, now it's 208 )
+          baud_div = baud_div * 16;
+	  // Test bench half cycle counter to toggle it 
+	  // 208/2 = 104
+           baud_div = baud_div/2;
+	  //As counter run's from 0 , substract from 1
+	   baud_div = baud_div-1;
+       end
+       endtask
+       
+
 	initial begin
+               uart_data_bit           = 2'b11;
+               uart_stop_bits          = 0; // 0: 1 stop bit; 1: 2 stop bit;
+               uart_stick_parity       = 0; // 1: force even parity
+               uart_parity_en          = 0; // parity enable
+               uart_even_odd_parity    = 1; // 0: odd parity; 1: even parity
+	       tb_set_uart_baud(50000000,288000,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
+               uart_timeout            = 2000;// wait time limit
+               uart_fifo_enable        = 0;	// fifo mode disable
+
+		$value$plusargs("risc_core_id=%d", d_risc_id);
 
 		#200; // Wait for reset removal
 	        repeat (10) @(posedge clock);
@@ -139,49 +210,102 @@
 
 	        repeat (2) @(posedge clock);
 		#1;
-		// Remove all the reset
-                wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+                // Remove all the reset
+                if(d_risc_id == 0) begin
+                     $display("STATUS: Working with Risc core 0");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+                end else if(d_risc_id == 1) begin
+                     $display("STATUS: Working with Risc core 1");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h21F);
+                end else if(d_risc_id == 2) begin
+                     $display("STATUS: Working with Risc core 2");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h41F);
+                end else if(d_risc_id == 3) begin
+                     $display("STATUS: Working with Risc core 3");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h81F);
+                end
 
+                repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
-		// Repeat cycles of 1000 clock edges as needed to complete testbench
-		repeat (30) begin
-			repeat (1000) @(posedge clock);
-			// $display("+1000 cycles");
-		end
+	        tb_uart0.debug_mode = 1; // enable debug display
+                tb_uart0.uart_init;
+                tb_uart0.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
+                                               uart_stick_parity, uart_timeout, uart_divisor);
+	        
+		tb_uart1.debug_mode = 1; // enable debug display
+                tb_uart1.uart_init;
+                tb_uart1.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
+                                               uart_stick_parity, uart_timeout, uart_divisor);
 
+                repeat (60000) @(posedge clock);  // wait for Processor Get Ready
+	        flag  = 0;
+		check_sum = 0;
+                
+                for (i=0; i<40; i=i+1)
+                    uart0_write_data[i] = $random;
+                
+	       for (i=0; i<40; i=i+1)
+                    uart1_write_data[i] = $random;
+                
+                fork
+		   //Drive UART-0
+                   begin
+                      for (i=0; i<40; i=i+1)
+                      begin
+                        $display ("\n... UART-0 Agent Writing char %x ...", uart0_write_data[i]);
+                         tb_uart0.write_char (uart0_write_data[i]);
+                      end
+                   end
+                   
+		   //Drive UART-1
+		   begin
+                      for (j=0; j<40; j=j+1)
+                      begin
+                        $display ("\n... UART-1 Agent Writing char %x ...", uart1_write_data[j]);
+                         tb_uart1.write_char (uart1_write_data[j]);
+                      end
+                   end
+		   
+		   //Receive UART-0
+                   begin
+                      for (k=0; k<40; k=k+1)
+                      begin
+                        tb_uart0.read_char_chk(uart1_write_data[k]);
+                      end
+                   end
+		   
+		   //Receive UART-1
+                   begin
+                      for (l=0; l<40; l=l+1)
+                      begin
+                        tb_uart1.read_char_chk(uart0_write_data[l]);
+                      end
+                   end
+                   join
+                
+                   test_fail = 0;
+                   #100
+                   tb_uart0.report_status(uart_rx_nu, uart_tx_nu);
+                   if(uart_tx_nu != 40) test_fail = 1;
+                   if(uart_rx_nu != 40) test_fail = 1;
 
-		$display("Monitor: Reading Back the expected value");
-		// User RISC core expect to write these value in global
-		// register, read back and decide on pass fail
-		// 0x30000018  = 0x11223344; 
-                // 0x3000001C  = 0x22334455; 
-                // 0x30000020  = 0x33445566; 
-                // 0x30000024  = 0x44556677; 
-                // 0x30000028 = 0x55667788; 
-                // 0x3000002C = 0x66778899; 
-
-                test_fail = 0;
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data,32'h11223344);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h22334455);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h33445566);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,read_data,32'h44556677);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,read_data,32'h55667788);
-		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,read_data,32'h66778899);
-
-
+                   tb_uart1.report_status(uart_rx_nu, uart_tx_nu);
+                   if(uart_tx_nu != 40) test_fail = 1;
+                   if(uart_rx_nu != 40) test_fail = 1;
+                
 	   
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
+	    	       $display("Monitor: Standalone Multi Serial (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
+		       $display("Monitor: Standalone Multi Serial (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
+	    	        $display("Monitor: Standalone Multi Serial (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
+		        $display("Monitor: Standalone Multi Serial (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
@@ -261,7 +385,7 @@
    assign io_in[32] = flash_io3;
 
    // Quard flash
-     s25fl256s #(.mem_file_name("arudino_risc_boot.ino.hex"),
+     s25fl256s #(.mem_file_name("arduino_multi_serial.ino.hex"),
 	         .otp_file_name("none"),
                  .TimingModel("S25FL512SAGMFI010_F_30pF")) 
 		 u_spi_flash_256mb (
@@ -278,7 +402,33 @@
        );
 
 
+//---------------------------
+//  UART-0 Agent integration
+// --------------------------
+wire uart0_txd,uart0_rxd;
 
+assign uart0_txd   = io_out[2];
+assign io_in[1]  = uart0_rxd ;
+ 
+uart_agent tb_uart0(
+	.mclk                (clock              ),
+	.txd                 (uart0_rxd          ),
+	.rxd                 (uart0_txd          )
+	);
+
+//---------------------------
+//  UART Agent integration
+// --------------------------
+wire uart1_txd,uart1_rxd;
+
+assign uart1_txd   = io_out[5];
+assign io_in[3]  = uart1_rxd ;
+ 
+uart_agent tb_uart1(
+	.mclk                (clock              ),
+	.txd                 (uart1_rxd          ),
+	.rxd                 (uart1_txd          )
+	);
 
 task wb_user_core_write;
 input [31:0] address;
diff --git a/verilog/dv/arduino_risc_boot/Makefile b/verilog/dv/arduino_risc_boot/Makefile
new file mode 100644
index 0000000..5c074b3
--- /dev/null
+++ b/verilog/dv/arduino_risc_boot/Makefile
@@ -0,0 +1,140 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+ 
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv32i/
+
+export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
+export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arduino_risc_boot
+
+all:  ${PATTERN:=.vcd}
+
+
+vvp:  ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+	${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+	${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+	${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+	${GCC_PREFIX}-ar rcs core.a Print.cpp.o
+	${GCC_PREFIX}-ar rcs core.a UARTClass.cpp.o
+	${GCC_PREFIX}-ar rcs core.a WInterrupts.c.o
+	${GCC_PREFIX}-ar rcs core.a WMath.cpp.o
+	${GCC_PREFIX}-ar rcs core.a WString.cpp.o
+	${GCC_PREFIX}-ar rcs core.a abi.cpp.o
+	${GCC_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+	${GCC_PREFIX}-ar rcs core.a plic_driver.c.o
+	${GCC_PREFIX}-ar rcs core.a entry.S.o
+	${GCC_PREFIX}-ar rcs core.a hooks.c.o
+	${GCC_PREFIX}-ar rcs core.a init.S.o
+	${GCC_PREFIX}-ar rcs core.a itoa.c.o
+	${GCC_PREFIX}-ar rcs core.a main.cpp.o
+	${GCC_PREFIX}-ar rcs core.a malloc.c.o
+	${GCC_PREFIX}-ar rcs core.a new.cpp.o
+	${GCC_PREFIX}-ar rcs core.a sbrk.c.o
+	${GCC_PREFIX}-ar rcs core.a start.S.o
+	${GCC_PREFIX}-ar rcs core.a wiring.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_analog.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
+	${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+	${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
+	${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
+	${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
+	${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
+	${GCC_PREFIX}-objdump -D  ${PATTERN}.ino.elf >   ${PATTERN}.ino.dump
+	rm *.o *.a
+ifeq ($(SIM),RTL)
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+   endif
+else  
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+   endif
+endif
+
+%.vcd: %.vvp
+	vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino b/verilog/dv/arduino_risc_boot/arduino_risc_boot.ino
similarity index 100%
rename from verilog/dv/arudino_risc_boot/arudino_risc_boot.ino
rename to verilog/dv/arduino_risc_boot/arduino_risc_boot.ino
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino.cpp b/verilog/dv/arduino_risc_boot/arduino_risc_boot.ino.cpp
similarity index 100%
rename from verilog/dv/arudino_risc_boot/arudino_risc_boot.ino.cpp
rename to verilog/dv/arduino_risc_boot/arduino_risc_boot.ino.cpp
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v b/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v
similarity index 96%
rename from verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
rename to verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v
index 96a034d..c435c40 100644
--- a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
+++ b/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v
@@ -75,7 +75,7 @@
 `timescale 1 ns / 1 ns
 
 `include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
-module arudino_risc_boot_tb;
+module arduino_risc_boot_tb;
 	reg clock;
 	reg wb_rst_i;
 	reg power1, power2;
@@ -102,6 +102,7 @@
 	wire [7:0] mprj_io_0;
 	reg         test_fail;
 	reg [31:0] read_data;
+	integer    d_risc_id;
 
 
 
@@ -124,12 +125,14 @@
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
-	   	$dumpvars(3, arudino_risc_boot_tb);
+	   	$dumpvars(3, arduino_risc_boot_tb);
 	   end
        `endif
 
 	initial begin
 
+		$value$plusargs("risc_core_id=%d", d_risc_id);
+
 		#200; // Wait for reset removal
 	        repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
@@ -140,11 +143,17 @@
 	        repeat (2) @(posedge clock);
 		#1;
 		// Remove all the reset
-                wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+		if(d_risc_id == 0) begin
+		     $display("STATUS: Working with Risc core 0");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+		end else if(d_risc_id == 1) begin
+		     $display("STATUS: Working with Risc core 1");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h21F);
+		end
 
 
 		// Repeat cycles of 1000 clock edges as needed to complete testbench
-		repeat (30) begin
+		repeat (40) begin
 			repeat (1000) @(posedge clock);
 			// $display("+1000 cycles");
 		end
@@ -261,7 +270,7 @@
    assign io_in[32] = flash_io3;
 
    // Quard flash
-     s25fl256s #(.mem_file_name("arudino_risc_boot.ino.hex"),
+     s25fl256s #(.mem_file_name("arduino_risc_boot.ino.hex"),
 	         .otp_file_name("none"),
                  .TimingModel("S25FL512SAGMFI010_F_30pF")) 
 		 u_spi_flash_256mb (
diff --git a/verilog/dv/arudino_risc_boot/Makefile b/verilog/dv/arudino_risc_boot/Makefile
deleted file mode 100644
index 6e6738d..0000000
--- a/verilog/dv/arudino_risc_boot/Makefile
+++ /dev/null
@@ -1,141 +0,0 @@
-# SPDX-FileCopyrightText: 2020 Efabless Corporation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-
-
-# ---- Include Partitioned Makefiles ----
-
-CONFIG = caravel_user_project
- 
-#######################################################################
-## Caravel Verilog for Integration Tests
-#######################################################################
-
-DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
-
-export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
-export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
-## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
-GCC32_PREFIX?=riscv32-unknown-elf
-
-
-## Simulation mode: RTL/GL
-SIM?=RTL
-DUMP?=OFF
-RISC_CORE?=0
-
-### To Enable IVERILOG FST DUMP
-export IVERILOG_DUMPER = fst
-
-
-.SUFFIXES:
-
-PATTERN = arudino_risc_boot
-
-all:  ${PATTERN:=.vcd}
-
-
-vvp:  ${PATTERN:=.vvp}
-
-%.vvp: %_tb.v
-	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
-	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
-	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
-	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
-	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
-	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
-	${GCC32_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
-	${GCC32_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
-	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
-	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
-	${GCC32_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
-	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
-	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
-	${GCC32_PREFIX}-ar rcs core.a Print.cpp.o
-	${GCC32_PREFIX}-ar rcs core.a UARTClass.cpp.o
-	${GCC32_PREFIX}-ar rcs core.a WInterrupts.c.o
-	${GCC32_PREFIX}-ar rcs core.a WMath.cpp.o
-	${GCC32_PREFIX}-ar rcs core.a WString.cpp.o
-	${GCC32_PREFIX}-ar rcs core.a abi.cpp.o
-	${GCC32_PREFIX}-ar rcs core.a fe300prci_driver.c.o
-	${GCC32_PREFIX}-ar rcs core.a plic_driver.c.o
-	${GCC32_PREFIX}-ar rcs core.a entry.S.o
-	${GCC32_PREFIX}-ar rcs core.a hooks.c.o
-	${GCC32_PREFIX}-ar rcs core.a init.S.o
-	${GCC32_PREFIX}-ar rcs core.a itoa.c.o
-	${GCC32_PREFIX}-ar rcs core.a main.cpp.o
-	${GCC32_PREFIX}-ar rcs core.a malloc.c.o
-	${GCC32_PREFIX}-ar rcs core.a new.cpp.o
-	${GCC32_PREFIX}-ar rcs core.a sbrk.c.o
-	${GCC32_PREFIX}-ar rcs core.a start.S.o
-	${GCC32_PREFIX}-ar rcs core.a wiring.c.o
-	${GCC32_PREFIX}-ar rcs core.a wiring_analog.c.o
-	${GCC32_PREFIX}-ar rcs core.a wiring_digital.c.o
-	${GCC32_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
-	${GCC32_PREFIX}-ar rcs core.a wiring_shift.c.o
-	${GCC32_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
-	${GCC32_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
-	${GCC32_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
-	${GCC32_PREFIX}-objdump -D  ${PATTERN}.ino.elf >   ${PATTERN}.ino.dump
-	rm *.o *.a
-ifeq ($(SIM),RTL)
-   ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
-	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
-	$< -o $@ 
-    else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
-	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
-	$< -o $@ 
-   endif
-else  
-   ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
-	$< -o $@ 
-    else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
-	$< -o $@ 
-   endif
-endif
-
-%.vcd: %.vvp
-	vvp $< +risc_core_id=$(RISC_CORE)
-
-
-# ---- Clean ----
-
-clean:
-	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
-
-.PHONY: clean hex all
diff --git a/verilog/dv/common/riscduino_board b/verilog/dv/common/riscduino_board
index 4891de4..5888540 160000
--- a/verilog/dv/common/riscduino_board
+++ b/verilog/dv/common/riscduino_board
@@ -1 +1 @@
-Subproject commit 4891de40f4aa37d72700ae63802ee33228783866
+Subproject commit 5888540bf2ae57d8c0326778a6d0c25b6ef95d35
diff --git a/verilog/dv/risc_boot/Makefile b/verilog/dv/risc_boot/Makefile
index 8d46511..a4e04d4 100644
--- a/verilog/dv/risc_boot/Makefile
+++ b/verilog/dv/risc_boot/Makefile
@@ -23,7 +23,7 @@
 
 DESIGNS?=../../..
 CONFIG = caravel_user_project
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 ########################################################
 #include $(MCW_ROOT)/verilog/dv/make/env.makefile
@@ -51,9 +51,9 @@
 ## Compiler Information 
 #######################################################################
 
-export TOOLS     ?=  /opt/riscv64i 
+export TOOLS     ?=  /opt/riscv32i 
 export GCC_PATH  ?=  $(TOOLS)/bin
-export GCC_PREFIX?=    riscv64-unknown-linux-gnu
+export GCC_PREFIX?=    riscv32-unknown-linux-gnu
 
 
 ############## USER SPECIFIC DEFINE ##################
diff --git a/verilog/dv/riscv_regress/Makefile b/verilog/dv/riscv_regress/Makefile
index 15194cc..609b7fe 100644
--- a/verilog/dv/riscv_regress/Makefile
+++ b/verilog/dv/riscv_regress/Makefile
@@ -16,7 +16,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
@@ -158,7 +158,7 @@
 todo_list    := $(bld_dir)/todo.txt
 
 # Environment
-export CROSS_PREFIX  ?= riscv64-unknown-elf-
+export CROSS_PREFIX  ?= riscv32-unknown-elf-
 export RISCV_GCC     ?= $(CROSS_PREFIX)gcc
 export RISCV_OBJDUMP ?= $(CROSS_PREFIX)objdump -D
 export RISCV_OBJCOPY ?= $(CROSS_PREFIX)objcopy -O verilog
diff --git a/verilog/dv/user_aes/Makefile b/verilog/dv/user_aes/Makefile
index c674de1..1ba7631 100644
--- a/verilog/dv/user_aes/Makefile
+++ b/verilog/dv/user_aes/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
@@ -51,13 +51,13 @@
 vvp:  ${PATTERN:=.vvp}
 
 %.vvp: %_tb.v
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_aes.c -o user_aes.o
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  aes.c -o aes.o
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/sc_print.c -o sc_print.o
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
-	${GCC64_PREFIX}-gcc -o user_aes.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_aes.o aes.o sc_print.o crt.o -nostartfiles -lc -lgcc -march=rv32imc -mabi=ilp32 -N
-	${GCC64_PREFIX}-objcopy -O verilog user_aes.elf user_aes.hex
-	${GCC64_PREFIX}-objdump -D user_aes.elf > user_aes.dump
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_aes.c -o user_aes.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  aes.c -o aes.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/sc_print.c -o sc_print.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
+	${GCC_PREFIX}-gcc -o user_aes.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_aes.o aes.o sc_print.o crt.o -nostartfiles -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+	${GCC_PREFIX}-objcopy -O verilog user_aes.elf user_aes.hex
+	${GCC_PREFIX}-objdump -D user_aes.elf > user_aes.dump
 	rm crt.o user_aes.o
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/user_cache_bypass/Makefile b/verilog/dv/user_cache_bypass/Makefile
index eb7f108..7ecacbf 100644
--- a/verilog/dv/user_cache_bypass/Makefile
+++ b/verilog/dv/user_cache_bypass/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
@@ -51,11 +51,11 @@
 vvp:  ${PATTERN:=.vvp}
 
 %.vvp: %_tb.v
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_cache_bypass.c -o user_cache_bypass.o
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
-	${GCC64_PREFIX}-gcc -o user_cache_bypass.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_cache_bypass.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
-	${GCC64_PREFIX}-objcopy -O verilog user_cache_bypass.elf user_cache_bypass.hex
-	${GCC64_PREFIX}-objdump -D user_cache_bypass.elf > user_cache_bypass.dump
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_cache_bypass.c -o user_cache_bypass.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
+	${GCC_PREFIX}-gcc -o user_cache_bypass.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_cache_bypass.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+	${GCC_PREFIX}-objcopy -O verilog user_cache_bypass.elf user_cache_bypass.hex
+	${GCC_PREFIX}-objdump -D user_cache_bypass.elf > user_cache_bypass.dump
 	rm crt.o user_cache_bypass.o
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/user_gpio/Makefile b/verilog/dv/user_gpio/Makefile
index 6c8a24b..c5090ee 100644
--- a/verilog/dv/user_gpio/Makefile
+++ b/verilog/dv/user_gpio/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
diff --git a/verilog/dv/user_i2cm/Makefile b/verilog/dv/user_i2cm/Makefile
index f01c09d..b2bfe32 100644
--- a/verilog/dv/user_i2cm/Makefile
+++ b/verilog/dv/user_i2cm/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
diff --git a/verilog/dv/user_pwm/Makefile b/verilog/dv/user_pwm/Makefile
index c521c74..b15037f 100644
--- a/verilog/dv/user_pwm/Makefile
+++ b/verilog/dv/user_pwm/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
diff --git a/verilog/dv/user_qspi/Makefile b/verilog/dv/user_qspi/Makefile
index 6b87fce..edf4cf1 100644
--- a/verilog/dv/user_qspi/Makefile
+++ b/verilog/dv/user_qspi/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
diff --git a/verilog/dv/user_risc_boot/Makefile b/verilog/dv/user_risc_boot/Makefile
index da70cab..0417a18 100644
--- a/verilog/dv/user_risc_boot/Makefile
+++ b/verilog/dv/user_risc_boot/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
@@ -51,11 +51,11 @@
 vvp:  ${PATTERN:=.vvp}
 
 %.vvp: %_tb.v
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_risc_boot.c -o user_risc_boot.o
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
-	${GCC64_PREFIX}-gcc -o user_risc_boot.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_risc_boot.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
-	${GCC64_PREFIX}-objcopy -O verilog user_risc_boot.elf user_risc_boot.hex
-	${GCC64_PREFIX}-objdump -D user_risc_boot.elf > user_risc_boot.dump
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_risc_boot.c -o user_risc_boot.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
+	${GCC_PREFIX}-gcc -o user_risc_boot.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_risc_boot.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+	${GCC_PREFIX}-objcopy -O verilog user_risc_boot.elf user_risc_boot.hex
+	${GCC_PREFIX}-objdump -D user_risc_boot.elf > user_risc_boot.dump
 	rm crt.o user_risc_boot.o
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/user_sram_exec/Makefile b/verilog/dv/user_sram_exec/Makefile
index 44f56ab..6e2a6cd 100644
--- a/verilog/dv/user_sram_exec/Makefile
+++ b/verilog/dv/user_sram_exec/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
@@ -51,11 +51,11 @@
 vvp:  ${PATTERN:=.vvp}
 
 %.vvp: %_tb.v
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_sram_exec.c -o user_sram_exec.o
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
-	${GCC64_PREFIX}-gcc -o user_sram_exec.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_sram_exec.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
-	${GCC64_PREFIX}-objcopy -O verilog user_sram_exec.elf user_sram_exec.hex
-	${GCC64_PREFIX}-objdump -D user_sram_exec.elf > user_sram_exec.dump
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_sram_exec.c -o user_sram_exec.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
+	${GCC_PREFIX}-gcc -o user_sram_exec.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_sram_exec.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+	${GCC_PREFIX}-objcopy -O verilog user_sram_exec.elf user_sram_exec.hex
+	${GCC_PREFIX}-objdump -D user_sram_exec.elf > user_sram_exec.dump
 	rm crt.o user_sram_exec.o
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/user_sspi/Makefile b/verilog/dv/user_sspi/Makefile
index f16f2a7..ddc2549 100644
--- a/verilog/dv/user_sspi/Makefile
+++ b/verilog/dv/user_sspi/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
diff --git a/verilog/dv/user_timer/Makefile b/verilog/dv/user_timer/Makefile
index 077652a..6479120 100644
--- a/verilog/dv/user_timer/Makefile
+++ b/verilog/dv/user_timer/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
diff --git a/verilog/dv/user_uart/Makefile b/verilog/dv/user_uart/Makefile
index 0c74848..1ca5cd8 100644
--- a/verilog/dv/user_uart/Makefile
+++ b/verilog/dv/user_uart/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
@@ -51,11 +51,11 @@
 vvp:  ${PATTERN:=.vvp}
 
 %.vvp: %_tb.v
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
-	${GCC64_PREFIX}-gcc -o user_uart.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_uart.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
-	${GCC64_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
-	${GCC64_PREFIX}-objdump -D user_uart.elf > user_uart.dump
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
+	${GCC_PREFIX}-gcc -o user_uart.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_uart.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+	${GCC_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
+	${GCC_PREFIX}-objdump -D user_uart.elf > user_uart.dump
 	rm crt.o user_uart.o
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/user_uart1/Makefile b/verilog/dv/user_uart1/Makefile
index 7f299a1..c6bc358 100644
--- a/verilog/dv/user_uart1/Makefile
+++ b/verilog/dv/user_uart1/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
@@ -51,11 +51,11 @@
 vvp:  ${PATTERN:=.vvp}
 
 %.vvp: %_tb.v
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
-	${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
-	${GCC64_PREFIX}-gcc -o user_uart.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_uart.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
-	${GCC64_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
-	${GCC64_PREFIX}-objdump -D user_uart.elf > user_uart.dump
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
+	${GCC_PREFIX}-gcc -o user_uart.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_uart.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+	${GCC_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
+	${GCC_PREFIX}-objdump -D user_uart.elf > user_uart.dump
 	rm crt.o user_uart.o
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/user_uart_master/Makefile b/verilog/dv/user_uart_master/Makefile
index c1eb60e..b54f457 100644
--- a/verilog/dv/user_uart_master/Makefile
+++ b/verilog/dv/user_uart_master/Makefile
@@ -24,18 +24,16 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
 SIM?=RTL
 DUMP?=OFF
-RISC_CORE?=0
 
 ### To Enable IVERILOG FST DUMP
 export IVERILOG_DUMPER = fst
@@ -78,7 +76,8 @@
 endif
 
 %.vcd: %.vvp
-	vvp $< +risc_core_id=$(RISC_CORE)
+	vvp $<
+
 
 
 # ---- Clean ----
diff --git a/verilog/dv/user_usb/Makefile b/verilog/dv/user_usb/Makefile
index d8eee80..4422ccd 100644
--- a/verilog/dv/user_usb/Makefile
+++ b/verilog/dv/user_usb/Makefile
@@ -24,12 +24,12 @@
 #######################################################################
 
 DESIGNS?=../../..
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
 YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+GCC_PREFIX?=riscv32-unknown-elf
 
 
 ## Simulation mode: RTL/GL
diff --git a/verilog/dv/wb_port/Makefile b/verilog/dv/wb_port/Makefile
index 0a94555..5ae8623 100644
--- a/verilog/dv/wb_port/Makefile
+++ b/verilog/dv/wb_port/Makefile
@@ -23,7 +23,7 @@
 
 DESIGNS?=../../..
 CONFIG = caravel_user_project
-TOOLS?=/opt/riscv64i/
+TOOLS?=/opt/riscv32i/
 
 ########################################################
 #include $(MCW_ROOT)/verilog/dv/make/env.makefile
@@ -51,9 +51,9 @@
 ## Compiler Information 
 #######################################################################
 
-export TOOLS     ?=  /opt/riscv64i 
+export TOOLS     ?=  /opt/riscv32i 
 export GCC_PATH  ?=  $(TOOLS)/bin
-export GCC_PREFIX?=    riscv64-unknown-linux-gnu
+export GCC_PREFIX?=    riscv32-unknown-linux-gnu
 
 
 
diff --git a/verilog/rtl/uart/src/uart_core.sv b/verilog/rtl/uart/src/uart_core.sv
index 948cd35..653e285 100644
--- a/verilog/rtl/uart/src/uart_core.sv
+++ b/verilog/rtl/uart/src/uart_core.sv
@@ -185,8 +185,9 @@
 
 //##############################################################
 // 16x Baud clock generation
+//  Baud Rate config = (F_CPU / (BAUD * 16)) - 2 
 // Example: to generate 19200 Baud clock from 50Mhz Link clock
-//    50 * 1000 * 1000 / (2 + cfg_baud_16x) = 19200 * 16
+//    cfg_baud_16x = ((50 * 1000 * 1000) / (19200 * 16)) - 2
 //    cfg_baud_16x = 0xA0 (160)
 //###############################################################