//////////////////////////////////////////////////////////////////////
////                                                              ////
////  UART CORE with TX/RX 16 Byte Buffer                         ////
////                                                              ////
////  This file is part of the YIFive cores project               ////
////  http://www.opencores.org/cores/yifive/                      ////
////                                                              ////
////  Description                                                 ////
////                                                              ////
////  To Do:                                                      ////
////    nothing                                                   ////
////                                                              ////
////  Author(s):                                                  ////
////      - Dinesh Annayya, dinesha@opencores.org                 ////
////                                                              ////
////  Revision :                                                  ////
////    0.1 - 20th June 2021, Dinesh A                            ////
////        1. initial version picked from                        ////
////          http://www.opencores.org/cores/oms8051mini          ////
////    0.2 - 25th June 2021, Dinesh A                            ////
////        Pad logic moved inside core to avoid combo logic at   ////
////        soc digital core level                                ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////

module uart_core 

     (  

   input logic         arst_n  , // async reset
   input logic         app_clk ,

        // Reg Bus Interface Signal
   input logic         reg_cs,
   input logic         reg_wr,
   input logic [3:0]   reg_addr,
   input logic [7:0]   reg_wdata,
   input logic         reg_be,

        // Outputs
   output logic [7:0]  reg_rdata,
   output logic        reg_ack,

       // Pad Control
   input  logic [1:0]  io_in,
   output logic [1:0]  io_out,
   output logic [1:0]  io_oeb

     );


parameter W  = 8'd8;
parameter DP = 8'd16;
parameter AW = (DP == 2)   ? 1 : 
	       (DP == 4)   ? 2 :
               (DP == 8)   ? 3 :
               (DP == 16)  ? 4 :
               (DP == 32)  ? 5 :
               (DP == 64)  ? 6 :
               (DP == 128) ? 7 :
               (DP == 256) ? 8 : 0;


// Wire Declaration
wire            app_reset_n       ;
wire            line_reset_n      ;

wire [W-1: 0]   tx_fifo_rd_data;
wire [W-1: 0]   rx_fifo_wr_data;
wire [W-1: 0]   app_rxfifo_data;
wire [W-1: 0]   app_txfifo_data;
wire [1  : 0]   error_ind;

// Wire 
wire            cfg_tx_enable        ; // Tx Enable
wire            cfg_rx_enable        ; // Rx Enable
wire            cfg_stop_bit         ; // 0 -> 1 Stop, 1 -> 2 Stop
wire   [1:0]    cfg_pri_mod          ; // priority mode, 0 -> nop, 1 -> Even, 2 -> Odd

wire            frm_error_o          ; // framing error
wire            par_error_o          ; // par error
wire            rx_fifo_full_err_o   ; // rx fifo full error

wire   [11:0]   cfg_baud_16x         ; // 16x Baud clock generation
wire            rx_fifo_wr_full      ;
wire            tx_fifo_rd_empty     ;
wire            tx_fifo_rd           ;
wire           app_rxfifo_empty      ;
wire           app_rxfifo_rd_en      ;
wire           app_tx_fifo_full      ;
wire           rx_fifo_wr            ;
wire           tx_fifo_wr_en         ;
wire [AW:0]    tx_fifo_fspace        ; // Total Tx fifo Free Space
wire [AW:0]    rx_fifo_dval          ; // Total Rx fifo Data Available
wire           si_ss                 ;


/////////////////////////////////////////////////////////
// uart interface
///////////////////////////////////////////////////////

wire            si                  ; 
wire            so                  ;

// for uart
assign  io_oeb[0] =  1'b1; // Uart RX
assign  si        =  io_in[0];
assign  io_out[0] =  1'b0;

assign  io_oeb[1] =  1'b0; // Uart TX
assign  io_out[1]  =  so;

uart_cfg u_cfg (

             . mclk                (app_clk),
             . reset_n             (app_reset_n),

        // Reg Bus Interface Signal
             . reg_cs              (reg_cs),
             . reg_wr              (reg_wr),
             . reg_addr            (reg_addr),
             . reg_wdata           (reg_wdata),
             . reg_be              (reg_be),

            // Outputs
            . reg_rdata           (reg_rdata),
            . reg_ack             (reg_ack),


       // configuration
            . cfg_tx_enable       (cfg_tx_enable),
            . cfg_rx_enable       (cfg_rx_enable),
            . cfg_stop_bit        (cfg_stop_bit),
            . cfg_pri_mod         (cfg_pri_mod),

            . cfg_baud_16x        (cfg_baud_16x),  

            . tx_fifo_full        (app_tx_fifo_full),
             .tx_fifo_fspace      (tx_fifo_fspace ),
            . tx_fifo_wr_en       (tx_fifo_wr_en),
            . tx_fifo_data        (app_txfifo_data),

            . rx_fifo_empty       (app_rxfifo_empty),
             .rx_fifo_dval        (rx_fifo_dval   ),
            . rx_fifo_rd_en       (app_rxfifo_rd_en),
            . rx_fifo_data        (app_rxfifo_data) ,

            . frm_error_o         (frm_error_o),
            . par_error_o         (par_error_o),
            . rx_fifo_full_err_o  (rx_fifo_full_err_o)

        );


//##############################################################
// 16x Baud clock generation
// Example: to generate 19200 Baud clock from 50Mhz Link clock
//    50 * 1000 * 1000 / (2 + cfg_baud_16x) = 19200 * 16
//    cfg_baud_16x = 0xA0 (160)
//###############################################################

wire line_clk_16x;

clk_ctl #(11) u_clk_ctl (
   // Outputs
       .clk_o          (line_clk_16x),

   // Inputs
       .mclk           (app_clk),
       .reset_n        (app_reset_n), 
       .clk_div_ratio  (cfg_baud_16x)
   );

//###################################
// Application Reset Synchronization
//###################################
reset_sync  u_app_rst (
	      .scan_mode  (1'b0           ),
              .dclk       (app_clk        ), // Destination clock domain
	      .arst_n     (arst_n         ), // active low async reset
              .srst_n     (app_reset_n    )
          );

//###################################
// Line Reset Synchronization
//###################################
reset_sync  u_line_rst (
	      .scan_mode  (1'b0           ),
              .dclk       (line_clk_16x   ), // Destination clock domain
	      .arst_n     (arst_n         ), // active low async reset
              .srst_n     (line_reset_n   )
          );


uart_txfsm u_txfsm (
               .reset_n           ( line_reset_n      ),
               .baud_clk_16x      ( line_clk_16x      ),

               .cfg_tx_enable     ( cfg_tx_enable     ),
               .cfg_stop_bit      ( cfg_stop_bit      ),
               .cfg_pri_mod       ( cfg_pri_mod       ),

       // FIFO control signal
               .fifo_empty        ( tx_fifo_rd_empty  ),
               .fifo_rd           ( tx_fifo_rd        ),
               .fifo_data         ( tx_fifo_rd_data   ),

          // Line Interface
               .so                ( so                )
          );


uart_rxfsm u_rxfsm (
               .reset_n           (  line_reset_n     ),
               .baud_clk_16x      (  line_clk_16x     ) ,

               .cfg_rx_enable     (  cfg_rx_enable    ),
               .cfg_stop_bit      (  cfg_stop_bit     ),
               .cfg_pri_mod       (  cfg_pri_mod      ),

               .error_ind         (  error_ind        ),

       // FIFO control signal
               .fifo_aval        ( !rx_fifo_wr_full  ),
               .fifo_wr          ( rx_fifo_wr        ),
               .fifo_data        ( rx_fifo_wr_data   ),

          // Line Interface
               .si               (si_ss              )
          );

async_fifo_th #(W,DP,0,0) u_rxfifo (                  
               .wr_clk             (line_clk_16x       ),
               .wr_reset_n         (line_reset_n       ),
               .wr_en              (rx_fifo_wr         ),
               .wr_data            (rx_fifo_wr_data    ),
               .full               (rx_fifo_wr_full    ), // sync'ed to wr_clk
               .wr_total_free_space(                   ),

               .rd_clk             (app_clk            ),
               .rd_reset_n         (app_reset_n        ),
               .rd_en              (app_rxfifo_rd_en   ),
               .empty              (app_rxfifo_empty   ),  // sync'ed to rd_clk
               .rd_total_aval      (rx_fifo_dval        ),
               .rd_data            (app_rxfifo_data    )
                );

async_fifo_th #(W,DP,0,0) u_txfifo  (
               .wr_clk             (app_clk            ),
               .wr_reset_n         (app_reset_n        ),
               .wr_en              (tx_fifo_wr_en      ),
               .wr_data            (app_txfifo_data    ),
               .full               (app_tx_fifo_full   ), // sync'ed to wr_clk
               .wr_total_free_space(tx_fifo_fspace     ),

               .rd_clk             (line_clk_16x       ),
               .rd_reset_n         (line_reset_n       ),
               .rd_en              (tx_fifo_rd         ),
               .empty              (tx_fifo_rd_empty   ),  // sync'ed to rd_clk
               .rd_total_aval      (                   ),
               .rd_data            (tx_fifo_rd_data    )
                   );


double_sync_low   u_si_sync (
               .in_data           ( si                ),
               .out_clk           (line_clk_16x       ),
               .out_rst_n         (line_reset_n       ),
               .out_data          (si_ss              ) 
          );

wire   frm_error          = (error_ind == 2'b01);
wire   par_error          = (error_ind == 2'b10);
wire   rx_fifo_full_err   = (error_ind == 2'b11);

double_sync_low   u_frm_err (
               .in_data           ( frm_error        ),
               .out_clk           ( app_clk          ),
               .out_rst_n         ( app_reset_n      ),
               .out_data          ( frm_error_o      ) 
          );

double_sync_low   u_par_err (
               .in_data           ( par_error        ),
               .out_clk           ( app_clk          ),
               .out_rst_n         ( app_reset_n      ),
               .out_data          ( par_error_o      ) 
          );

double_sync_low   u_rxfifo_err (
               .in_data           ( rx_fifo_full_err ),
               .out_clk           ( app_clk          ),
               .out_rst_n         ( app_reset_n      ),
               .out_data          ( rx_fifo_full_err_o  ) 
          );


endmodule