diff --git a/.gitmodules b/.gitmodules
index 102aa0f..dbec024 100644
--- a/.gitmodules
+++ b/.gitmodules
@@ -4,3 +4,6 @@
 [submodule "verilog/rtl/yifive/ycr1c"]
 	path = verilog/rtl/yifive/ycr1c
 	url = https://github.com/dineshannayya/ycr1cr.git
+[submodule "verilog/dv/common/riscduino_board1"]
+	path = verilog/dv/common/riscduino_board
+	url = https://github.com/dineshannayya/riscduino_board.git
diff --git a/CHANGELOG b/CHANGELOG
new file mode 100644
index 0000000..2cc8063
--- /dev/null
+++ b/CHANGELOG
@@ -0,0 +1,177 @@
+RISCDUINO Score
+
+  4.6.1  June 24,2022, Dinesh A
+         First fully arduino compatible based verification 
+         test case arudino_risc_boot added
+  4.6    June 13 2022, Dinesh A                               
+         1. icache and dcache bypass config addded            
+  4.5    June 2 2022, Dinesh A                                
+         1. DFFRAM Replaced by SRAM                           
+  4.4    May 29 2022, Dinesh A                                
+         1. Digital PLL integrated and clock debug signal add 
+           @digitial io [33] port                             
+  4.3    May 24 2022, Dinesh A                                
+         Re targetted the design to mpw-6 tools set and risc  
+         core logic are timing optimized to 100mhz            
+  4.2    April 6 2022, Dinesh A                               
+         1. SSPI CS# increased from 1 to 4                    
+         2. uart port increase to two                         
+  3.9    Mar 16 2022, Dinesh A                                
+         1. 3 Timer added                                     
+         2. Pinmux Register address movement                  
+         3. Risc fuse_mhartid is removed and internal tied    
+            inside risc core                                  
+         4. caravel wb addressing issue restrict to 0x300FFFFF
+  3.8    Mar 10 2022, Dinesh A                                
+         1. usb chip select bug inside uart_* wrapper         
+         2. in wb_host, increased usb clk ctrl to 4 to 8 bit  
+  3.7    Mar 2 2022, Dinesh A                                 
+           1.   qspi cs# port mapping changed from io 28:25 to 25:28
+           2.   sspi, bug fix in reg access and endian support added
+           3.   Wishbone interconnect now support cross-connect     
+          feature                                             
+  3.6    Feb 19, Dinesh A                                     
+           A.  Changed Module: wb_host                            
+           wishbone slave clock generation config increase from   
+           3 to 4 bit support clock source selection              
+           B.  Changed Module: qspim                              
+            1. Bug fix in spi rise and fall pulse relation w.r.t  
+               spi_clk. Note: Previous version work only with     
+               spi clock config = 0x2                             
+            2. spi_oen generation fix for different spi mode      
+            3. spi_csn de-assertion fix for different spi clk div 
+  3.5  Feb 16, Dinesh A                                     
+           As SRAM from sky130A is not yet qualified,             
+           Following changes are done                             
+           A. riscv core cache and tcm interface changed to dffram 
+           B. removed the mbist controller + 4 SRAM               
+           C. mbist controller slave port in wb_intern removed    
+           D. Pinmux mbist port are removed                       
+           E. mbist related buffering are removed at wb_inter     
+  3.4  Feb 14, 2022, Dinesh A                               
+       burst mode supported added in imem buffer inside     
+       riscv core                                           
+          We have created seperate repo from this onwards           
+            SRAM based SOC is spin-out to                           
+            dineshannayya/riscduino_sram.git                        
+          This repo will remove mbist + SRAM and RISC SRAM will be  
+          replaced with DFRAM                                       
+  3.3  Feb 08, 2022, Dinesh A                               
+       support added spisram support in qspim ip            
+       There are 4 chip select available in qspim           
+       CS#0/CS#1 targeted for SPI FLASH                     
+       CS#2/CS#3 targeted for SPI SRAM                      
+  3.2  Feb 02, 2022, Dinesh A                               
+       Bug fix around icache/dcache and wishbone burst      
+       access clean-up                                      
+  3.1  Jan 15, 2022, Dinesh A                               
+       Major changes in qspim logic to handle special mode  
+  3.0  Jan 14, 2022, Dinesh A                               
+       Moving from riscv core from syntacore/scr1 to         
+       yfive/ycr1 on sankranti 2022 (A Hindu New Year)       
+  2.6  Jan 08, 2022, Dinesh A                               
+       Pinmux Interrupt Logic change                         
+  2.5  Jan 06, 2022, Dinesh A                               
+       TCM RAM Bug fix inside syntacore                       
+  2.4  Jan 01, 2022, Dinesh A                               
+        LA[0] is added as soft reset option at wb_port         
+  2.3  Dec 24, 2021, Dinesh A                               
+       UART Master added with message handler at wb_host       
+  2.2  Dec 20, 2021, Dinesh A                               
+       1. MBIST design issue fix for yosys                     
+       2. Full chip Timing and Transition clean-up                               
+  2.1  Dec 16, 2021, Dinesh A                               
+       1.4 MBIST controller changed to single one              
+       2.Added one more SRAM to TCM memory                     
+       3.WishBone Interconnect chang to take care mbist changes
+       4.Pinmux change to take care of mbist changes           
+  2.0  Dec 14, 2021, Dinesh A                               
+       Added two more 2K SRAM added into Wishbone Interface 
+  1.9  Dec 11, 2021, Dinesh A                               
+       2 x 2K SRAM added into Wishbone Interface            
+       Temporary ADC block removed                          
+  1.8  Nov 23, 2021, Dinesh A                               
+        Three Chip Specific Signature added at PinMux Reg   
+        reg_22,reg_23,reg_24                                
+  1.7   Nov 15, 2021, Dinesh A                              
+         Bug fix in clk_ctrl High/Low counter width         
+         Removed sram_clock                                 
+  1.6   Nov 14, 2021, Dinesh A                              
+        Major bug, clock divider inside the wb_host reset   
+        connectivity open is fixed                          
+  1.5 - 6th Nov 2021, Dinesh A                              
+        Clock Skew block moved inside respective block due  
+        to top-level power hook-up challenges for small IP  
+  1.4 - 13th Oct 2021, Dinesh A                             
+        Basic verification and Synthesis cleanup            
+  1.3 - 30th Sept 2021, Dinesh.A                            
+        2KB SRAM Interface added to RISC Core               
+  1.2 - 29th Sept 2021, Dinesh.A                            
+        1. copied the repo from yifive and renames as       
+           riscdunino                                       
+        2. Removed the SDRAM controlled                     
+        3. Added PinMux                                     
+        4. Added SAR ADC for 6 channel                      
+  1.1 - 1st Aug 2021, Dinesh A                              
+        usb1.1 host integrated part of uart_i2cm_usb module,
+        due to number of IO pin limitation,                 
+        Only UART/I2C/USB selected based on config mode     
+  1.0 - 28th July 2021, Dinesh A                            
+        i2cm integrated part of uart_i2cm module,           
+        due to number of IO pin limitation,                 
+        Only UART OR I2C selected based on config mode      
+  0.9 - 7th July 2021, Dinesh A                             
+        Removed 2 Unused port connection io_in[31:30] to    
+        spi_master to avoid lvs issue                       
+  0.8 - 6th July 2021, Dinesh A                             
+        For Better SDRAM Interface timing we have taping    
+        sdram_clock goint to io_out[29] directly from       
+        global register block, this help in better SDRAM    
+        interface timing control                            
+  0.7 - 28th June 2021, Dinesh A                            
+        wb_interconnect master port are interchanged for    
+        better physical placement.                          
+        m0 - External HOST                                  
+        m1 - RISC IMEM                                      
+        m2 - RISC DMEM                                      
+  0.6 - 27th June 2021, Dinesh A                            
+        Digital core level tie are moved inside IP to avoid 
+        power hook up at core level                         
+        u_risc_top - test_mode & test_rst_n                 
+        u_intercon - s*_wbd_err_i                           
+        unused wb_cti_i is removed from u_sdram_ctrl        
+  0.5 - 25th June 2021, Dinesh A                            
+        Since carvel gives only 16MB address space for user 
+        space, we have implemented indirect address select  
+        with 8 bit bank select given inside wb_host         
+        core Address = {Bank_Sel[7:0], Wb_Address[23:0]     
+        caravel user address space is                       
+        0x3000_0000 to 0x30FF_FFFF                          
+  0.4 - 25th June 2021, Dinesh A                            
+        Moved the pad logic inside sdram,spi,uart block to  
+        avoid logic at digital core level                   
+  0.3 - 20th June 2021, Dinesh A                            
+         1. uart core is integrated                         
+         2. 3rd Slave ported added to wishbone interconnect 
+  0.2 - 17th June 2021, Dinesh A                            
+         1. In risc core, wishbone and core domain is          
+            created                                            
+         2. cpu and rtc clock are generated in glbl reg block  
+         3. in wishbone interconnect:- Stagging flop are added 
+            at interface to break wishbone timing path         
+         4. buswidth warning are fixed inside spi_master       
+         modified rtl files are                                
+            verilog/rtl/digital_core/src/digital_core.sv       
+            verilog/rtl/digital_core/src/glbl_cfg.sv           
+            verilog/rtl/lib/wb_stagging.sv                     
+            verilog/rtl/syntacore/scr1/src/top/scr1_dmem_wb.sv 
+            verilog/rtl/syntacore/scr1/src/top/scr1_imem_wb.sv 
+            verilog/rtl/syntacore/scr1/src/top/scr1_top_wb.sv  
+            verilog/rtl/user_project_wrapper.v                 
+            verilog/rtl/wb_interconnect/src/wb_interconnect.sv 
+            verilog/rtl/spi_master/src/spim_clkgen.sv          
+            verilog/rtl/spi_master/src/spim_ctrl.sv            
+  0.1 - 16th Feb 2021, Dinesh A                             
+        Initial integration with Risc-V core +              
+        Wishbone Cross Bar + SPI  Master                    
+
diff --git a/verilog/dv/arudino_risc_boot/Makefile b/verilog/dv/arudino_risc_boot/Makefile
new file mode 100644
index 0000000..935f53e
--- /dev/null
+++ b/verilog/dv/arudino_risc_boot/Makefile
@@ -0,0 +1,140 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+ 
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv64i/
+
+export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC64_PREFIX?=riscv64-unknown-elf
+GCC32_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arudino_risc_boot
+
+all:  ${PATTERN:=.vcd}
+
+
+vvp:  ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+	${GCC32_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+	${GCC32_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+	${GCC32_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+	${GCC32_PREFIX}-ar rcs core.a Print.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a UARTClass.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a WInterrupts.c.o
+	${GCC32_PREFIX}-ar rcs core.a WMath.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a WString.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a abi.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+	${GCC32_PREFIX}-ar rcs core.a plic_driver.c.o
+	${GCC32_PREFIX}-ar rcs core.a entry.S.o
+	${GCC32_PREFIX}-ar rcs core.a hooks.c.o
+	${GCC32_PREFIX}-ar rcs core.a init.S.o
+	${GCC32_PREFIX}-ar rcs core.a itoa.c.o
+	${GCC32_PREFIX}-ar rcs core.a main.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a malloc.c.o
+	${GCC32_PREFIX}-ar rcs core.a new.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a sbrk.c.o
+	${GCC32_PREFIX}-ar rcs core.a start.S.o
+	${GCC32_PREFIX}-ar rcs core.a wiring.c.o
+	${GCC32_PREFIX}-ar rcs core.a wiring_analog.c.o
+	${GCC32_PREFIX}-ar rcs core.a wiring_digital.c.o
+	${GCC32_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a wiring_shift.c.o
+	${GCC32_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
+	${GCC32_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
+	${GCC32_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
+	${GCC32_PREFIX}-objdump -D  ${PATTERN}.ino.elf >   ${PATTERN}.ino.dump
+	rm *.o *.a
+ifeq ($(SIM),RTL)
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+   endif
+else  
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+   endif
+endif
+
+%.vcd: %.vvp
+	vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino b/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino
new file mode 100644
index 0000000..524e74d
--- /dev/null
+++ b/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino
@@ -0,0 +1,48 @@
+#define uint32_t  long
+
+#define reg_mprj_globl_reg0  (*(volatile uint32_t*)0x10020000)
+#define reg_mprj_globl_reg1  (*(volatile uint32_t*)0x10020004)
+#define reg_mprj_globl_reg2  (*(volatile uint32_t*)0x10020008)
+#define reg_mprj_globl_reg3  (*(volatile uint32_t*)0x1002000C)
+#define reg_mprj_globl_reg4  (*(volatile uint32_t*)0x10020010)
+#define reg_mprj_globl_reg5  (*(volatile uint32_t*)0x10020014)
+#define reg_mprj_globl_reg6  (*(volatile uint32_t*)0x10020018)
+#define reg_mprj_globl_reg7  (*(volatile uint32_t*)0x1002001C)
+#define reg_mprj_globl_reg8  (*(volatile uint32_t*)0x10020020)
+#define reg_mprj_globl_reg9  (*(volatile uint32_t*)0x10020024)
+#define reg_mprj_globl_reg10 (*(volatile uint32_t*)0x10020028)
+#define reg_mprj_globl_reg11 (*(volatile uint32_t*)0x1002002C)
+#define reg_mprj_globl_reg12 (*(volatile uint32_t*)0x10020030)
+#define reg_mprj_globl_reg13 (*(volatile uint32_t*)0x10020034)
+#define reg_mprj_globl_reg14 (*(volatile uint32_t*)0x10020038)
+#define reg_mprj_globl_reg15 (*(volatile uint32_t*)0x1002003C)
+#define reg_mprj_globl_reg16 (*(volatile uint32_t*)0x10020040)
+#define reg_mprj_globl_reg17 (*(volatile uint32_t*)0x10020044)
+#define reg_mprj_globl_reg18 (*(volatile uint32_t*)0x10020048)
+#define reg_mprj_globl_reg19 (*(volatile uint32_t*)0x1002004C)
+#define reg_mprj_globl_reg20 (*(volatile uint32_t*)0x10020050)
+#define reg_mprj_globl_reg21 (*(volatile uint32_t*)0x10020054)
+#define reg_mprj_globl_reg22 (*(volatile uint32_t*)0x10020058)
+#define reg_mprj_globl_reg23 (*(volatile uint32_t*)0x1002005C)
+#define reg_mprj_globl_reg24 (*(volatile uint32_t*)0x10020060)
+#define reg_mprj_globl_reg25 (*(volatile uint32_t*)0x10020064)
+#define reg_mprj_globl_reg26 (*(volatile uint32_t*)0x10020068)
+#define reg_mprj_globl_reg27 (*(volatile uint32_t*)0x1002006C)
+
+
+
+void setup() {
+  // put your setup code here, to run once:
+    reg_mprj_globl_reg22  = 0x11223344; 
+    reg_mprj_globl_reg23  = 0x22334455; 
+    reg_mprj_globl_reg24  = 0x33445566; 
+    reg_mprj_globl_reg25  = 0x44556677; 
+    reg_mprj_globl_reg26 = 0x55667788; 
+    reg_mprj_globl_reg27 = 0x66778899; 
+
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+
+}
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino.cpp b/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino.cpp
new file mode 100644
index 0000000..67dcf28
--- /dev/null
+++ b/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino.cpp
@@ -0,0 +1,53 @@
+#include <Arduino.h>
+#line 1 "/tmp/.arduinoIDE-unsaved2022521-1233968-h2rhfb.1e1mr/sketch_jun21a/sketch_jun21a.ino"
+#define uint32_t  long
+
+#define reg_mprj_globl_reg0  (*(volatile uint32_t*)0x10020000)
+#define reg_mprj_globl_reg1  (*(volatile uint32_t*)0x10020004)
+#define reg_mprj_globl_reg2  (*(volatile uint32_t*)0x10020008)
+#define reg_mprj_globl_reg3  (*(volatile uint32_t*)0x1002000C)
+#define reg_mprj_globl_reg4  (*(volatile uint32_t*)0x10020010)
+#define reg_mprj_globl_reg5  (*(volatile uint32_t*)0x10020014)
+#define reg_mprj_globl_reg6  (*(volatile uint32_t*)0x10020018)
+#define reg_mprj_globl_reg7  (*(volatile uint32_t*)0x1002001C)
+#define reg_mprj_globl_reg8  (*(volatile uint32_t*)0x10020020)
+#define reg_mprj_globl_reg9  (*(volatile uint32_t*)0x10020024)
+#define reg_mprj_globl_reg10 (*(volatile uint32_t*)0x10020028)
+#define reg_mprj_globl_reg11 (*(volatile uint32_t*)0x1002002C)
+#define reg_mprj_globl_reg12 (*(volatile uint32_t*)0x10020030)
+#define reg_mprj_globl_reg13 (*(volatile uint32_t*)0x10020034)
+#define reg_mprj_globl_reg14 (*(volatile uint32_t*)0x10020038)
+#define reg_mprj_globl_reg15 (*(volatile uint32_t*)0x1002003C)
+#define reg_mprj_globl_reg16 (*(volatile uint32_t*)0x10020040)
+#define reg_mprj_globl_reg17 (*(volatile uint32_t*)0x10020044)
+#define reg_mprj_globl_reg18 (*(volatile uint32_t*)0x10020048)
+#define reg_mprj_globl_reg19 (*(volatile uint32_t*)0x1002004C)
+#define reg_mprj_globl_reg20 (*(volatile uint32_t*)0x10020050)
+#define reg_mprj_globl_reg21 (*(volatile uint32_t*)0x10020054)
+#define reg_mprj_globl_reg22 (*(volatile uint32_t*)0x10020058)
+#define reg_mprj_globl_reg23 (*(volatile uint32_t*)0x1002005C)
+#define reg_mprj_globl_reg24 (*(volatile uint32_t*)0x10020060)
+#define reg_mprj_globl_reg25 (*(volatile uint32_t*)0x10020064)
+#define reg_mprj_globl_reg26 (*(volatile uint32_t*)0x10020068)
+#define reg_mprj_globl_reg27 (*(volatile uint32_t*)0x1002006C)
+
+
+
+void setup();
+void loop();
+void setup() {
+  // put your setup code here, to run once:
+    reg_mprj_globl_reg22  = 0x11223344; 
+    reg_mprj_globl_reg23  = 0x22334455; 
+    reg_mprj_globl_reg24  = 0x33445566; 
+    reg_mprj_globl_reg25  = 0x44556677; 
+    reg_mprj_globl_reg26 = 0x55667788; 
+    reg_mprj_globl_reg27 = 0x66778899; 
+
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+
+}
+
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v b/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
new file mode 100644
index 0000000..96a034d
--- /dev/null
+++ b/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
@@ -0,0 +1,414 @@
+////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText:  2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
+//////////////////////////////////////////////////////////////////////
+////                                                              ////
+////  Standalone User validation Test bench                       ////
+////                                                              ////
+////  This file is part of the YIFive cores project               ////
+////  https://github.com/dineshannayya/yifive_r0.git              ////
+////  http://www.opencores.org/cores/yifive/                      ////
+////                                                              ////
+////  Description                                                 ////
+////   This is a standalone test bench to validate the            ////
+////   Digital core.                                              ////
+////   1. User Risc core is booted using  compiled code of        ////
+////      user_risc_boot.c                                        ////
+////   2. User Risc core uses Serial Flash and SDRAM to boot      ////
+////   3. After successful boot, Risc core will  write signature  ////
+////      in to  user register from 0x1003_0058 to 0x1003_006C    ////
+////   4. Through the External Wishbone Interface we read back    ////
+////       from 0x3003_0058 to 0x3003_006C                        ////
+////       and validate the user register to declared pass fail   ////
+////                                                              ////
+////  To Do:                                                      ////
+////    nothing                                                   ////
+////                                                              ////
+////  Author(s):                                                  ////
+////      - Dinesh Annayya, dinesha@opencores.org                 ////
+////                                                              ////
+////  Revision :                                                  ////
+////    0.1 - 16th Feb 2021, Dinesh A                             ////
+////                                                              ////
+//////////////////////////////////////////////////////////////////////
+////                                                              ////
+//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
+////                                                              ////
+//// This source file may be used and distributed without         ////
+//// restriction provided that this copyright statement is not    ////
+//// removed from the file and that any derivative work contains  ////
+//// the original copyright notice and the associated disclaimer. ////
+////                                                              ////
+//// This source file is free software; you can redistribute it   ////
+//// and/or modify it under the terms of the GNU Lesser General   ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any   ////
+//// later version.                                               ////
+////                                                              ////
+//// This source is distributed in the hope that it will be       ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
+//// PURPOSE.  See the GNU Lesser General Public License for more ////
+//// details.                                                     ////
+////                                                              ////
+//// You should have received a copy of the GNU Lesser General    ////
+//// Public License along with this source; if not, download it   ////
+//// from http://www.opencores.org/lgpl.shtml                     ////
+////                                                              ////
+//////////////////////////////////////////////////////////////////////
+
+`default_nettype wire
+
+`timescale 1 ns / 1 ns
+
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+module arudino_risc_boot_tb;
+	reg clock;
+	reg wb_rst_i;
+	reg power1, power2;
+	reg power3, power4;
+
+        reg        wbd_ext_cyc_i;  // strobe/request
+        reg        wbd_ext_stb_i;  // strobe/request
+        reg [31:0] wbd_ext_adr_i;  // address
+        reg        wbd_ext_we_i;  // write
+        reg [31:0] wbd_ext_dat_i;  // data output
+        reg [3:0]  wbd_ext_sel_i;  // byte enable
+
+        wire [31:0] wbd_ext_dat_o;  // data input
+        wire        wbd_ext_ack_o;  // acknowlegement
+        wire        wbd_ext_err_o;  // error
+
+	// User I/O
+	wire [37:0] io_oeb;
+	wire [37:0] io_out;
+	wire [37:0] io_in;
+
+	wire gpio;
+	wire [37:0] mprj_io;
+	wire [7:0] mprj_io_0;
+	reg         test_fail;
+	reg [31:0] read_data;
+
+
+
+	// External clock is used by default.  Make this artificially fast for the
+	// simulation.  Normally this would be a slow clock and the digital PLL
+	// would be the fast clock.
+
+	always #12.5 clock <= (clock === 1'b0);
+
+	initial begin
+		clock = 0;
+                wbd_ext_cyc_i ='h0;  // strobe/request
+                wbd_ext_stb_i ='h0;  // strobe/request
+                wbd_ext_adr_i ='h0;  // address
+                wbd_ext_we_i  ='h0;  // write
+                wbd_ext_dat_i ='h0;  // data output
+                wbd_ext_sel_i ='h0;  // byte enable
+	end
+
+	`ifdef WFDUMP
+	   initial begin
+	   	$dumpfile("simx.vcd");
+	   	$dumpvars(3, arudino_risc_boot_tb);
+	   end
+       `endif
+
+	initial begin
+
+		#200; // Wait for reset removal
+	        repeat (10) @(posedge clock);
+		$display("Monitor: Standalone User Risc Boot Test Started");
+
+		// Remove Wb Reset
+		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+
+	        repeat (2) @(posedge clock);
+		#1;
+		// Remove all the reset
+                wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+
+
+		// Repeat cycles of 1000 clock edges as needed to complete testbench
+		repeat (30) begin
+			repeat (1000) @(posedge clock);
+			// $display("+1000 cycles");
+		end
+
+
+		$display("Monitor: Reading Back the expected value");
+		// User RISC core expect to write these value in global
+		// register, read back and decide on pass fail
+		// 0x30000018  = 0x11223344; 
+                // 0x3000001C  = 0x22334455; 
+                // 0x30000020  = 0x33445566; 
+                // 0x30000024  = 0x44556677; 
+                // 0x30000028 = 0x55667788; 
+                // 0x3000002C = 0x66778899; 
+
+                test_fail = 0;
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data,32'h11223344);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h22334455);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h33445566);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,read_data,32'h44556677);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,read_data,32'h55667788);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,read_data,32'h66778899);
+
+
+	   
+	    	$display("###################################################");
+          	if(test_fail == 0) begin
+		   `ifdef GL
+	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
+		   `else
+		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
+		   `endif
+	        end else begin
+		    `ifdef GL
+	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
+		    `else
+		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
+		    `endif
+		 end
+	    	$display("###################################################");
+	    $finish;
+	end
+
+	initial begin
+		wb_rst_i <= 1'b1;
+		#100;
+		wb_rst_i <= 1'b0;	    	// Release reset
+	end
+wire USER_VDD1V8 = 1'b1;
+wire VSS = 1'b0;
+
+user_project_wrapper u_top(
+`ifdef USE_POWER_PINS
+    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
+    .vssd1(VSS),	// User area 1 digital ground
+`endif
+    .wb_clk_i        (clock),  // System clock
+    .user_clock2     (1'b1),  // Real-time clock
+    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
+
+    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
+    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
+    .wbs_adr_i   (wbd_ext_adr_i),  // address
+    .wbs_we_i    (wbd_ext_we_i),  // write
+    .wbs_dat_i   (wbd_ext_dat_i),  // data output
+    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
+
+    .wbs_dat_o   (wbd_ext_dat_o),  // data input
+    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
+
+ 
+    // Logic Analyzer Signals
+    .la_data_in      ('1) ,
+    .la_data_out     (),
+    .la_oenb         ('0),
+ 
+
+    // IOs
+    .io_in          (io_in)  ,
+    .io_out         (io_out) ,
+    .io_oeb         (io_oeb) ,
+
+    .user_irq       () 
+
+);
+
+`ifndef GL // Drive Power for Hold Fix Buf
+    // All standard cell need power hook-up for functionality work
+    initial begin
+
+    end
+`endif    
+
+//------------------------------------------------------
+//  Integrate the Serial flash with qurd support to
+//  user core using the gpio pads
+//  ----------------------------------------------------
+
+   wire flash_clk = io_out[24];
+   wire flash_csb = io_out[25];
+   // Creating Pad Delay
+   wire #1 io_oeb_29 = io_oeb[29];
+   wire #1 io_oeb_30 = io_oeb[30];
+   wire #1 io_oeb_31 = io_oeb[31];
+   wire #1 io_oeb_32 = io_oeb[32];
+   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+
+   assign io_in[29] = flash_io0;
+   assign io_in[30] = flash_io1;
+   assign io_in[31] = flash_io2;
+   assign io_in[32] = flash_io3;
+
+   // Quard flash
+     s25fl256s #(.mem_file_name("arudino_risc_boot.ino.hex"),
+	         .otp_file_name("none"),
+                 .TimingModel("S25FL512SAGMFI010_F_30pF")) 
+		 u_spi_flash_256mb (
+           // Data Inputs/Outputs
+       .SI      (flash_io0),
+       .SO      (flash_io1),
+       // Controls
+       .SCK     (flash_clk),
+       .CSNeg   (flash_csb),
+       .WPNeg   (flash_io2),
+       .HOLDNeg (flash_io3),
+       .RSTNeg  (!wb_rst_i)
+
+       );
+
+
+
+
+task wb_user_core_write;
+input [31:0] address;
+input [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h1;  // write
+  wbd_ext_dat_i =data;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
+  repeat (2) @(posedge clock);
+end
+endtask
+
+task  wb_user_core_read;
+input [31:0] address;
+output [31:0] data;
+reg    [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='0;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(negedge clock);
+  data  = wbd_ext_dat_o;  
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
+  repeat (2) @(posedge clock);
+end
+endtask
+
+task  wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg    [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='0;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(negedge clock);
+  data  = wbd_ext_dat_o;  
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  if(data !== cmp_data) begin
+     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+     test_fail = 1;
+  end else begin
+     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
+  end
+  repeat (2) @(posedge clock);
+end
+endtask
+
+`ifdef GL
+
+wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
+wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
+wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
+wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
+wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
+wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
+wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
+
+wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
+wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
+wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
+wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
+wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
+wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
+wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
+
+`endif
+
+/**
+`ifdef GL
+//-----------------------------------------------------------------------------
+// RISC IMEM amd DMEM Monitoring TASK
+//-----------------------------------------------------------------------------
+
+`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
+
+always@(posedge `RISC_CORE.wb_clk) begin
+    if(`RISC_CORE.wbd_imem_ack_i)
+          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
+    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
+          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
+    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
+          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
+end
+
+`endif
+**/
+endmodule
+`include "s25fl256s.sv"
+`default_nettype wire
diff --git a/verilog/dv/common/riscduino_board b/verilog/dv/common/riscduino_board
new file mode 160000
index 0000000..4891de4
--- /dev/null
+++ b/verilog/dv/common/riscduino_board
@@ -0,0 +1 @@
+Subproject commit 4891de40f4aa37d72700ae63802ee33228783866
diff --git a/verilog/dv/firmware/ycr1_specific.h b/verilog/dv/firmware/ycr_specific.h
similarity index 100%
rename from verilog/dv/firmware/ycr1_specific.h
rename to verilog/dv/firmware/ycr_specific.h