diff --git a/gds/pinmux_top.gds.gz b/gds/pinmux_top.gds.gz
index 3aa8d8f..ad11414 100644
--- a/gds/pinmux_top.gds.gz
+++ b/gds/pinmux_top.gds.gz
Binary files differ
diff --git a/gds/uart_i2c_usb_spi_top.gds.gz b/gds/uart_i2c_usb_spi_top.gds.gz
index 910d1dd..f74cb0a 100644
--- a/gds/uart_i2c_usb_spi_top.gds.gz
+++ b/gds/uart_i2c_usb_spi_top.gds.gz
Binary files differ
diff --git a/gds/user_project_wrapper.gds.gz b/gds/user_project_wrapper.gds.gz
index 257748c..c2bf5d8 100644
--- a/gds/user_project_wrapper.gds.gz
+++ b/gds/user_project_wrapper.gds.gz
Binary files differ
diff --git a/gds/wb_host.gds.gz b/gds/wb_host.gds.gz
index 8cd28a7..d2d2fbc 100644
--- a/gds/wb_host.gds.gz
+++ b/gds/wb_host.gds.gz
Binary files differ
diff --git a/lef/pinmux_top.lef.gz b/lef/pinmux_top.lef.gz
index add8628..26303aa 100644
--- a/lef/pinmux_top.lef.gz
+++ b/lef/pinmux_top.lef.gz
Binary files differ
diff --git a/lef/uart_i2c_usb_spi_top.lef.gz b/lef/uart_i2c_usb_spi_top.lef.gz
index e29e070..b356799 100644
--- a/lef/uart_i2c_usb_spi_top.lef.gz
+++ b/lef/uart_i2c_usb_spi_top.lef.gz
Binary files differ
diff --git a/lef/user_project_wrapper.lef.gz b/lef/user_project_wrapper.lef.gz
index 9872c44..d9a659d 100644
--- a/lef/user_project_wrapper.lef.gz
+++ b/lef/user_project_wrapper.lef.gz
Binary files differ
diff --git a/lef/wb_host.lef.gz b/lef/wb_host.lef.gz
index b07139a..7b96a81 100644
--- a/lef/wb_host.lef.gz
+++ b/lef/wb_host.lef.gz
Binary files differ
diff --git a/openlane/pinmux_top/config.tcl b/openlane/pinmux_top/config.tcl
index b1bce35..243f5e5 100755
--- a/openlane/pinmux_top/config.tcl
+++ b/openlane/pinmux_top/config.tcl
@@ -98,8 +98,8 @@
 
 
 set ::env(PL_TIME_DRIVEN) 1
-set ::env(PL_TARGET_DENSITY) "0.38"
-set ::env(CELL_PAD) "4"
+set ::env(PL_TARGET_DENSITY) "0.36"
+set ::env(CELL_PAD) "8"
 #set ::env(GRT_ADJUSTMENT) {0.2}
 
 
@@ -131,13 +131,11 @@
 
 set ::env(DIODE_INSERTION_STRATEGY) 4
 
+
 #LVS Issue - DEF Base looks to having issue
 set ::env(MAGIC_EXT_USE_GDS) {1}
 
-set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) "0"
-set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) "1"
-set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) "1"
-set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) "1"
+
 set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
 set ::env(QUIT_ON_MAGIC_DRC) "1"
 set ::env(QUIT_ON_LVS_ERROR) "1"
diff --git a/openlane/pinmux_top/pin_order.cfg b/openlane/pinmux_top/pin_order.cfg
index d0074cf..e99154e 100644
--- a/openlane/pinmux_top/pin_order.cfg
+++ b/openlane/pinmux_top/pin_order.cfg
@@ -73,6 +73,8 @@
 p_reset_n
 s_reset_n
 usb_clk
+strap_uartm\[1\]
+strap_uartm\[0\]
 strap_sticky\[31\]
 strap_sticky\[30\]
 strap_sticky\[29\]
@@ -170,7 +172,7 @@
 pinmux_debug\[29\]
 pinmux_debug\[30\]
 pinmux_debug\[31\]
-dbg_clk_mon
+cpu_clk
 
 #W
 
@@ -302,7 +304,7 @@
 
 
 #N
-rtc_clk               000 0 2
+rtc_clk               000 0 4
 digital_io_oen\[37\]  
 digital_io_out\[37\]
 digital_io_in\[37\]
@@ -334,6 +336,40 @@
 digital_io_out\[28\]
 
 
+cfg_dco_mode         0200 0 2
+cfg_pll_enb
+pll_ref_clk
+cfg_pll_fed_div\[4\]
+cfg_pll_fed_div\[3\]
+cfg_pll_fed_div\[2\]
+cfg_pll_fed_div\[1\]
+cfg_pll_fed_div\[0\]
+cfg_dc_trim\[25\]
+cfg_dc_trim\[24\]
+cfg_dc_trim\[23\]
+cfg_dc_trim\[22\]
+cfg_dc_trim\[21\]
+cfg_dc_trim\[20\]
+cfg_dc_trim\[19\]
+cfg_dc_trim\[18\]
+cfg_dc_trim\[17\]
+cfg_dc_trim\[16\]
+cfg_dc_trim\[15\]
+cfg_dc_trim\[14\]
+cfg_dc_trim\[13\]
+cfg_dc_trim\[12\]
+cfg_dc_trim\[11\]
+cfg_dc_trim\[10\]
+cfg_dc_trim\[9\]
+cfg_dc_trim\[8\]
+cfg_dc_trim\[7\]
+cfg_dc_trim\[6\]
+cfg_dc_trim\[5\]
+cfg_dc_trim\[4\]
+cfg_dc_trim\[3\]
+cfg_dc_trim\[2\]
+cfg_dc_trim\[1\]
+cfg_dc_trim\[0\]
 
 digital_io_in\[28\]  0300 0 2
 digital_io_oen\[27\]
diff --git a/openlane/qspim_top/config.tcl b/openlane/qspim_top/config.tcl
index 06d3dd2..4cdf315 100755
--- a/openlane/qspim_top/config.tcl
+++ b/openlane/qspim_top/config.tcl
@@ -85,9 +85,6 @@
 # helps in anteena fix
 set ::env(USE_ARC_ANTENNA_CHECK) "0"
 
-#LVS Issue - DEF Base looks to having issue
-set ::env(MAGIC_EXT_USE_GDS) {1}
-
 #set ::env(FP_IO_VEXTEND) 4
 #set ::env(FP_IO_HEXTEND) 4
 
@@ -102,6 +99,10 @@
 set ::env(DIODE_INSERTION_STRATEGY) 4
 
 
+#LVS Issue - DEF Base looks to having issue
+set ::env(MAGIC_EXT_USE_GDS) {1}
+
+
 set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
 set ::env(QUIT_ON_MAGIC_DRC) "1"
 set ::env(QUIT_ON_LVS_ERROR) "1"
diff --git a/openlane/uart_i2cm_usb_spi_top/config.tcl b/openlane/uart_i2cm_usb_spi_top/config.tcl
index 0415b67..86a397e 100644
--- a/openlane/uart_i2cm_usb_spi_top/config.tcl
+++ b/openlane/uart_i2cm_usb_spi_top/config.tcl
@@ -105,9 +105,6 @@
 set ::env(PL_TIME_DRIVEN) 1
 set ::env(PL_TARGET_DENSITY) "0.42"
 
-#LVS Issue - DEF Base looks to having issue
-set ::env(MAGIC_EXT_USE_GDS) {1}
-
 # helps in anteena fix
 set ::env(USE_ARC_ANTENNA_CHECK) "0"
 
@@ -127,9 +124,9 @@
 set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) {1}
 set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) {1}
 
-#set ::env(GLB_RT_ADJUSTMENT) {0.25}
-#set ::env(GRT_LAYER_ADJUSTMENTS) {0.25,0,0,0,0,0}
 set ::env(CELL_PAD) {8}
+#LVS Issue - DEF Base looks to having issue
+set ::env(MAGIC_EXT_USE_GDS) {1}
 
 set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
 set ::env(QUIT_ON_MAGIC_DRC) "1"
diff --git a/openlane/user_project_wrapper/config.tcl b/openlane/user_project_wrapper/config.tcl
index ce84731..7e004cb 100644
--- a/openlane/user_project_wrapper/config.tcl
+++ b/openlane/user_project_wrapper/config.tcl
@@ -136,6 +136,7 @@
 set ::env(VDD_PIN) {vccd1}
 set ::env(GND_PIN) {vssd1}
 
+set ::env(DRT_OPT_ITERS) {32}
 
 set ::env(GRT_OBS) "                              \
 	                li1   150 130  833.1  546.54,\
diff --git a/openlane/user_project_wrapper/macro.cfg b/openlane/user_project_wrapper/macro.cfg
index 0bbe026..8c696b9 100644
--- a/openlane/user_project_wrapper/macro.cfg
+++ b/openlane/user_project_wrapper/macro.cfg
@@ -1,6 +1,7 @@
 u_qspi_master                2250             650           N
 u_uart_i2c_usb_spi           2250            1350           N
 u_pinmux                     2250            2250           N
+u_pll                        2500            3148           N
 
 u_riscv_top.i_core_top_0    75	      1400 	      N
 u_riscv_top.i_core_top_1    1200	      1400	      FN
@@ -15,4 +16,4 @@
 
 u_intercon                  1850            650             N
 u_wb_host                   1750            100             N
-u_pll                       2300            68              N
+
diff --git a/openlane/wb_host/config.tcl b/openlane/wb_host/config.tcl
index 2f1eeb6..08d18dd 100755
--- a/openlane/wb_host/config.tcl
+++ b/openlane/wb_host/config.tcl
@@ -42,7 +42,8 @@
 set ::env(VERILOG_FILES) "\
      $::env(DESIGN_DIR)/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
      $::env(DESIGN_DIR)/../../verilog/rtl/wb_host/src/wb_host.sv \
-     $::env(DESIGN_DIR)/../../verilog/rtl/wb_host/src/wb_reset_fsm.sv \
+     $::env(DESIGN_DIR)/../../verilog/rtl/wb_host/src/wbh_reset_fsm.sv \
+     $::env(DESIGN_DIR)/../../verilog/rtl/wb_host/src/wbh_reg.sv \
      $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_fifo.sv      \
      $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_wb.sv        \
      $::env(DESIGN_DIR)/../../verilog/rtl/lib/clk_ctl.v          \
@@ -85,7 +86,7 @@
 
 
 # If you're going to use multiple power domains, then keep this disabled.
-set ::env(RUN_CVC) 0
+set ::env(RUN_CVC) 1
 
 #set ::env(PDN_CFG) $script_dir/pdn.tcl
 
@@ -95,8 +96,8 @@
 
 
 
-#set ::env(FP_IO_VEXTEND) 4
-#set ::env(FP_IO_HEXTEND) 4
+set ::env(FP_IO_VEXTEND) 4
+set ::env(FP_IO_HEXTEND) 4
 
 set ::env(FP_PDN_VPITCH) 100
 set ::env(FP_PDN_HPITCH) 100
@@ -109,6 +110,7 @@
 
 set ::env(DIODE_INSERTION_STRATEGY) 4
 
+
 #LVS Issue - DEF Base looks to having issue
 set ::env(MAGIC_EXT_USE_GDS) {1}
 
diff --git a/openlane/wb_host/pin_order.cfg b/openlane/wb_host/pin_order.cfg
index 2c6a14d..26c9f8e 100644
--- a/openlane/wb_host/pin_order.cfg
+++ b/openlane/wb_host/pin_order.cfg
@@ -141,46 +141,8 @@
 la_data_in\[17\]    
 
 #E
-cfg_dc_trim\[7\]   000 0 2
-cfg_dc_trim\[8\]
-cfg_dc_trim\[9\]
-cfg_dc_trim\[10\]
-cfg_dc_trim\[11\]
-cfg_dc_trim\[12\]
-cfg_dc_trim\[13\]
-cfg_dc_trim\[14\]
-cfg_dc_trim\[15\]
-cfg_dc_trim\[16\]
-cfg_dc_trim\[17\]
-cfg_dc_trim\[18\]
-cfg_dc_trim\[19\]
 
-cfg_dc_trim\[25\]
-cfg_dc_trim\[24\]
-cfg_dc_trim\[23\]
-cfg_dc_trim\[22\]
-cfg_dc_trim\[21\]
-cfg_dc_trim\[20\]
-
-pll_clk_out\[0\]
-pll_clk_out\[1\]
-cfg_pll_fed_div\[0\]
-cfg_pll_fed_div\[1\]
-cfg_pll_fed_div\[2\]
-cfg_pll_fed_div\[3\]
-cfg_pll_fed_div\[4\]
-cfg_pll_enb
-cfg_dco_mode
-cfg_dc_trim\[0\]
-cfg_dc_trim\[1\]
-cfg_dc_trim\[2\]
-cfg_dc_trim\[3\]
-cfg_dc_trim\[4\]
-cfg_dc_trim\[5\]
-cfg_dc_trim\[6\]
-
-wbd_pll_rst_n 
-pll_ref_clk  
+wbd_pll_rst_n      000 0 2
 
 
 
@@ -193,7 +155,6 @@
 sdout_oen
 
 
-dbg_clk_mon
 
 
 #N
@@ -354,6 +315,8 @@
 p_reset_n
 s_reset_n
 xtal_clk
+strap_uartm\[1\]
+strap_uartm\[0\]
 strap_sticky\[31\]
 strap_sticky\[30\]
 strap_sticky\[29\]
diff --git a/spef/pinmux_top.spef.gz b/spef/pinmux_top.spef.gz
index 7925e43..18380a6 100644
--- a/spef/pinmux_top.spef.gz
+++ b/spef/pinmux_top.spef.gz
Binary files differ
diff --git a/spef/uart_i2c_usb_spi_top.spef.gz b/spef/uart_i2c_usb_spi_top.spef.gz
index 38da2cd..a1d7884 100644
--- a/spef/uart_i2c_usb_spi_top.spef.gz
+++ b/spef/uart_i2c_usb_spi_top.spef.gz
Binary files differ
diff --git a/spef/user_project_wrapper.spef.gz b/spef/user_project_wrapper.spef.gz
index 5cf16ca..41018c3 100644
--- a/spef/user_project_wrapper.spef.gz
+++ b/spef/user_project_wrapper.spef.gz
Binary files differ
diff --git a/spef/wb_host.spef.gz b/spef/wb_host.spef.gz
index 21c69ee..c3af1ee 100644
--- a/spef/wb_host.spef.gz
+++ b/spef/wb_host.spef.gz
Binary files differ
diff --git a/spi/lvs/user_project_wrapper.spice.gz b/spi/lvs/user_project_wrapper.spice.gz
index 81abd3e..0ac7bb9 100644
--- a/spi/lvs/user_project_wrapper.spice.gz
+++ b/spi/lvs/user_project_wrapper.spice.gz
Binary files differ
diff --git a/verilog/dv/Makefile b/verilog/dv/Makefile
index f1f0d68..238d50c 100644
--- a/verilog/dv/Makefile
+++ b/verilog/dv/Makefile
@@ -19,12 +19,15 @@
 .SUFFIXES:
 .SILENT: clean all
 
-PATTERNS = wb_port risc_boot user_risc_boot user_uart user_uart1 user_qspi user_i2cm riscv_regress user_basic user_usb user_pwm user_timer user_uart_master uart_master user_sram_exec user_cache_bypass user_gpio user_spi_isp arduino_risc_boot arduino_hello_world arduino_ascii_table arduino_multi_serial arduino_arrays arduino_switchCase2 arduino_character_analysis arduino_string arduino_digital_port_control user_sspi user_aes user_sema arduino_timer_intr user_mcore_test1 user_mcore_test2 arduino_gpio_intr arduino_i2c_scaner
+PATTERNS = user_basic user_uart user_uart1 user_risc_boot user_qspi user_sspi user_i2cm user_usb user_gpio user_aes user_spi_isp user_timer user_uart_master user_sram_exec user_cache_bypass user_pwm user_sema risc_boot uart_master wb_port arduino_arrays arduino_digital_port_control arduino_i2c_scaner arduino_risc_boot arduino_timer_intr arduino_ascii_table arduino_gpio_intr arduino_i2c_wr_rd arduino_string arduino_ws281x arduino_character_analysis arduino_hello_world arduino_multi_serial arduino_switchCase2 user_mcore_test1 user_mcore_test2 riscv_regress
 
 all:  ${PATTERNS}
+	echo "################# Test case Summary #####################" > regression.rpt
+	xterm -e /usr/bin/watch -n 25 /bin/cat regression.rpt & 
 	for i in ${PATTERNS}; do \
-		( cd $$i && make -f Makefile $${i}.vcd &> verify.log && grep Monitor verify.log) ; \
+		( cd $$i && make | tee run.log && grep Monitor run.log | grep $$i >> ../regression.rpt) ; \
 	done
+	echo "################# End of Test case Summary #####################" >> regression.rpt
 
 DV_PATTERNS = $(foreach dv, $(PATTERNS), verify-$(dv))
 $(DV_PATTERNS): verify-% : 
diff --git a/verilog/dv/agents/user_tasks.sv b/verilog/dv/agents/user_tasks.sv
deleted file mode 100644
index a6dedb0..0000000
--- a/verilog/dv/agents/user_tasks.sv
+++ /dev/null
@@ -1,201 +0,0 @@
-
-/********************
-parameter bit  [15:0] PAD_STRAP = (2'b00 << `PSTRAP_CLK_SRC             ) |
-                                  (2'b00 << `PSTRAP_CLK_DIV             ) |
-                                  (1'b1  << `PSTRAP_UARTM_CFG           ) |
-                                  (1'b1  << `PSTRAP_QSPI_SRAM           ) |
-                                  (2'b10 << `PSTRAP_QSPI_FLASH          ) |
-                                  (1'b1  << `PSTRAP_RISCV_RESET_MODE    ) |
-                                  (1'b1  << `PSTRAP_RISCV_CACHE_BYPASS  ) |
-                                  (1'b1  << `PSTRAP_RISCV_SRAM_CLK_EDGE ) |
-                                  (2'b00 << `PSTRAP_CLK_SKEW            ) |
-                                  (1'b0  << `PSTRAP_DEFAULT_VALUE       ) ;
-****/
-
-`ifdef RISC_BOOT // RISCV Based Test case
-parameter bit  [15:0] PAD_STRAP = 16'b0000_0001_1011_0000;
-`else
-parameter bit  [15:0] PAD_STRAP = 16'b0000_0000_1011_0000;
-`endif
-
-/***********************************************
-
-wire  [15:0]    strap_in;
-assign strap_in[`PSTRAP_CLK_SRC] = 2'b00;            // System Clock Source wbs/riscv: User clock1
-assign strap_in[`PSTRAP_CLK_DIV] = 2'b00;            // Clock Division for wbs/riscv : 0 Div
-assign strap_in[`PSTRAP_UARTM_CFG] = 1'b0;           // uart master config control -  constant value based on system clock selection
-assign strap_in[`PSTRAP_QSPI_SRAM] = 1'b1;           // QSPI SRAM Mode Selection - Quad 
-assign strap_in[`PSTRAP_QSPI_FLASH] = 2'b10;         // QSPI Fash Mode Selection - Quad
-assign strap_in[`PSTRAP_RISCV_RESET_MODE] = 1'b1;    // Riscv Reset control - Removed Riscv on Power On Reset
-assign strap_in[`PSTRAP_RISCV_CACHE_BYPASS] = 1'b0;  // Riscv Cache Bypass: 0 - Cache Enable
-assign strap_in[`PSTRAP_RISCV_SRAM_CLK_EDGE] = 1'b0; // Riscv SRAM clock edge selection: 0 - Normal
-assign strap_in[`PSTRAP_CLK_SKEW] = 2'b00;           // Skew selection 2'b00 - Default value
-
-assign strap_in[`PSTRAP_DEFAULT_VALUE] = 1'b0;       // 0 - Normal
-***/
-
-initial
-begin
-   // Run in Fast Sim Mode
-   `ifdef GL
-       force u_top.u_wb_host._8654_.Q= 1'b1; 
-   `else
-       force u_top.u_wb_host.u_fastsim_buf.X = 1'b1; 
-    `endif
-
-end
-task init;
-begin
-   //#1 - Apply Reset
-   #1000 wb_rst_i = 0; 
-   repeat (10) @(posedge clock);
-   #1000 wb_rst_i = 1; 
-
-   //#3 - Remove Reset
-   #1000 wb_rst_i = 0; 
-   repeat (10) @(posedge clock);
-   //#4 - Wait for Power on reset removal
-   wait(u_top.p_reset_n == 1);          
-
-   // #5 - Wait for system reset removal
-   wait(u_top.s_reset_n == 1);          // Wait for system reset removal
-   repeat (10) @(posedge clock);
-
-/****
-   //#2 - Apply Strap
-   strap_in[`PSTRAP_CLK_SRC] = 2'b00;            // System Clock Source wbs/riscv: User clock1
-   strap_in[`PSTRAP_CLK_DIV] = 2'b00;            // Clock Division for wbs/riscv : 0 Div
-   strap_in[`PSTRAP_UARTM_CFG] = 1'b0;           // uart master config control -  constant value based on system clock selection
-   strap_in[`PSTRAP_QSPI_SRAM] = 1'b1;           // QSPI SRAM Mode Selection - Quad 
-   strap_in[`PSTRAP_QSPI_FLASH] = 2'b10;         // QSPI Fash Mode Selection - Quad
-   strap_in[`PSTRAP_RISCV_RESET_MODE] = 1'b1;    // Riscv Reset control - Removed Riscv on Power On Reset
-   strap_in[`PSTRAP_RISCV_CACHE_BYPASS] = 1'b0;  // Riscv Cache Bypass: 0 - Cache Enable
-   strap_in[`PSTRAP_RISCV_SRAM_CLK_EDGE] = 1'b0; // Riscv SRAM clock edge selection: 0 - Normal
-   strap_in[`PSTRAP_CLK_SKEW] = 2'b00;           // Skew selection 2'b00 - Default value
-
-   strap_in[`PSTRAP_DEFAULT_VALUE] = 1'b0;       // 0 - Normal
-
-   force u_top.io_in[36:29] = strap_in[15:8];
-   force u_top.io_in[20:13] = strap_in[7:0];
-   repeat (10) @(posedge clock);
-   
-   //#3 - Remove Reset
-   wb_rst_i = 0; // Remove Reset
-   repeat (10) @(posedge clock);
-   //#4 - Wait for Power on reset removal
-   wait(u_top.p_reset_n == 1);          
-
-    // #5 - Release the Strap
-    release u_top.io_in[36:29];
-    release u_top.io_in[20:13];
-
-    // #6 - Wait for system reset removal
-    wait(u_top.s_reset_n == 1);          // Wait for system reset removal
-    repeat (10) @(posedge clock);
-
-***/
-  end
-endtask
-
-//-----------------------------------------------
-// Apply user defined strap at power-on
-//-----------------------------------------------
-
-task         apply_strap;
-input [15:0] strap;
-begin
-
-   repeat (10) @(posedge clock);
-   //#1 - Apply Reset
-   wb_rst_i = 1; 
-   //#2 - Apply Strap
-   force u_top.io_in[36:29] = strap[15:8];
-   force u_top.io_in[20:13] = strap[7:0];
-   repeat (10) @(posedge clock);
-    
-   //#3 - Remove Reset
-   wb_rst_i = 0; // Remove Reset
-
-   //#4 - Wait for Power on reset removal
-   wait(u_top.p_reset_n == 1);          
-
-   // #5 - Release the Strap
-   release u_top.io_in[36:29];
-   release u_top.io_in[20:13];
-
-   // #6 - Wait for system reset removal
-   wait(u_top.s_reset_n == 1);          // Wait for system reset removal
-   repeat (10) @(posedge clock);
-
-end
-endtask
-
-//---------------------------------------------------------
-// Create Pull Up/Down Based on Reset Strap Parameter
-//---------------------------------------------------------
-genvar gCnt;
-generate
- for(gCnt=0; gCnt<16; gCnt++) begin : g_strap
-    if(gCnt < 8) begin
-       if(PAD_STRAP[gCnt]) begin
-           pullup(io_in[13+gCnt]); 
-       end else begin
-           pulldown(io_in[13+gCnt]); 
-       end
-    end else begin
-       if(PAD_STRAP[gCnt]) begin
-           pullup(io_in[29+gCnt-8]); 
-       end else begin
-           pulldown(io_in[29+gCnt-8]); 
-       end
-    end
- end 
-
-`ifdef RISC_BOOT // RISCV Based Test case
-//-------------------------------------------
-task wait_riscv_boot;
-input [7:0] id;
-begin
-   // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
-   // bit[7:0]  - core-0
-   // bit[15:8]  - core-1
-   // bit[23:16] - core-2
-   // bit[31:24] - core-3
-   $display("Status:  Waiting for RISCV Core Boot ... ");
-   read_data = 0;
-   while((read_data >> (id*8)) != 8'h1) begin
-	   repeat (200) @(posedge clock);
-       wb_user_core_read(`ADDR_SPACE_GLBL+`GLBL_CFG_MAIL_BOX,read_data);
-   end
-
-   $display("Status:  RISCV Core is Booted ");
-
-end
-endtask
-
-
-task wait_riscv_exit;
-input [7:0] id;
-begin
-   // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
-   // bit[7:0]  - core-0
-   // bit[15:8]  - core-1
-   // bit[23:16] - core-2
-   // bit[31:24] - core-3
-   $display("Status:  Waiting for RISCV Core Boot ... ");
-   read_data = 0;
-   while((read_data >> (id*8)) != 8'hFF) begin
-	   repeat (200) @(posedge clock);
-       wb_user_core_read(`ADDR_SPACE_GLBL+`GLBL_CFG_MAIL_BOX,read_data);
-   end
-
-   $display("Status:  RISCV Core is Exited ");
-
-end
-endtask
-
-`endif
-
-
-endgenerate
-
diff --git a/verilog/dv/arduino_arrays/Makefile b/verilog/dv/arduino_arrays/Makefile
index 0e61c01..e6eb75d 100644
--- a/verilog/dv/arduino_arrays/Makefile
+++ b/verilog/dv/arduino_arrays/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/arduino_arrays/arduino_arrays_tb.v b/verilog/dv/arduino_arrays/arduino_arrays_tb.v
index cd671e2..f7f4808 100644
--- a/verilog/dv/arduino_arrays/arduino_arrays_tb.v
+++ b/verilog/dv/arduino_arrays/arduino_arrays_tb.v
@@ -74,32 +74,14 @@
 `define TB_HEX "arduino_arrays.hex"
 `define TB_TOP  arduino_arrays_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+parameter real CLK1_PERIOD  = 20; // 50 Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
+`include "user_tasks.sv"
 
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
 	reg            flag                 ;
 
 parameter P_FSM_C      = 4'b0000; // Command Phase Only
@@ -129,25 +111,15 @@
 parameter P_QDDR   = 2'b11;
 
         
-	integer    d_risc_id;
 
          integer i,j;
 
 
 
 
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
 
 	initial begin
-		clock = 0;
 	        flag  = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -192,7 +164,7 @@
 		$display("Monitor: Standalone User Risc Boot Test Started");
    
        init();
-       wait_riscv_boot(d_risc_id);
+       wait_riscv_boot();
 
 		// Remove Wb Reset
 		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
@@ -266,58 +238,21 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Ardunio arrays  (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Ardunio arrays (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Ardunio arrays (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Ardunio arrays (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
@@ -338,14 +273,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -397,136 +332,6 @@
 endtask
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_ascii_table/Makefile b/verilog/dv/arduino_ascii_table/Makefile
index 38987f6..8370ca4 100644
--- a/verilog/dv/arduino_ascii_table/Makefile
+++ b/verilog/dv/arduino_ascii_table/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -104,24 +104,24 @@
 	rm *.o *.a
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v b/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v
index 0927816..5152893 100644
--- a/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v
+++ b/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v
@@ -74,32 +74,14 @@
 `define TB_HEX "arduino_ascii_table.hex"
 `define TB_TOP  arduino_ascii_table_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
 
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
         //----------------------------------
         // Uart Configuration
         // ---------------------------------
@@ -121,25 +103,11 @@
 
 	reg [31:0]     check_sum            ;
         
-	integer    d_risc_id;
 
          integer i,j;
 
-
-
-
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock = 0;
 	        flag  = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -195,19 +163,22 @@
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
 
+        init();
+
+
 		#200; // Wait for reset removal
 	        repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 		// Remove Wb Reset
-		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
 	        repeat (2) @(posedge clock);
 		#1;
         // Remove all the reset
         if(d_risc_id == 0) begin
              $display("STATUS: Working with Risc core 0");
-             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+             //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
         end else if(d_risc_id == 1) begin
              $display("STATUS: Working with Risc core 1");
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -219,13 +190,15 @@
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
         end
 
+        wait_riscv_boot();
+
         repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
 	    tb_uart.debug_mode = 0; // disable debug display
         tb_uart.uart_init;
         tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, uart_stick_parity, uart_timeout, uart_divisor);
 
-        repeat (45000) @(posedge clock);  // wait for Processor Get Ready
+        repeat (1000) @(posedge clock);  // wait for Processor Get Ready
 	    flag  = 0;
 		check_sum = 0;
             
@@ -262,63 +235,21 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone Hello World (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone Hello World (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone Hello World (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone Hello World (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[0]  = 1'b1; // RESET
 assign io_in[16] = 1'b0 ; // SPIS SCK 
@@ -338,14 +269,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -398,135 +329,6 @@
 	);
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_character_analysis/Makefile b/verilog/dv/arduino_character_analysis/Makefile
index b50000c..9c24fbb 100644
--- a/verilog/dv/arduino_character_analysis/Makefile
+++ b/verilog/dv/arduino_character_analysis/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/arduino_character_analysis/arduino_character_analysis_tb.v b/verilog/dv/arduino_character_analysis/arduino_character_analysis_tb.v
index b93e319..275b18b 100644
--- a/verilog/dv/arduino_character_analysis/arduino_character_analysis_tb.v
+++ b/verilog/dv/arduino_character_analysis/arduino_character_analysis_tb.v
@@ -75,32 +75,13 @@
 `define TB_HEX "arduino_character_analysis.hex"
 `define TB_TOP  arduino_character_analysis_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
         //----------------------------------
         // Uart Configuration
         // ---------------------------------
@@ -123,7 +104,6 @@
 
 	    reg [31:0]     check_sum            ;
         
-	    integer    d_risc_id;
 
          integer i,j;
 
@@ -155,18 +135,8 @@
 
 
 
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock = 0;
 	        flag  = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -227,7 +197,7 @@
 		$display("Monitor: Standalone User Risc Boot Test Started");
    
        init();
-       wait_riscv_boot(d_risc_id);
+       wait_riscv_boot();
 
 		// Remove Wb Reset
 		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
@@ -313,63 +283,21 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	   $display("Monitor: character_analysis (GL) Passed");
+	    	   $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: character_analysis (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	   $display("Monitor: character_analysis (GL) Failed");
+	    	   $display("Monitor: %m  (GL) Failed");
 		    `else
-		       $display("Monitor: character_analysis (RTL) Failed");
+		       $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 assign io_in[21] = 1'b0; // CLOCK
@@ -449,136 +377,6 @@
 	);
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_digital_port_control/Makefile b/verilog/dv/arduino_digital_port_control/Makefile
index 7d035ec..fbdcf71 100644
--- a/verilog/dv/arduino_digital_port_control/Makefile
+++ b/verilog/dv/arduino_digital_port_control/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/arduino_digital_port_control/arduino_digital_port_control_tb.v b/verilog/dv/arduino_digital_port_control/arduino_digital_port_control_tb.v
index edd4444..eaf97d5 100644
--- a/verilog/dv/arduino_digital_port_control/arduino_digital_port_control_tb.v
+++ b/verilog/dv/arduino_digital_port_control/arduino_digital_port_control_tb.v
@@ -74,33 +74,15 @@
 `define TB_HEX "arduino_digital_port_control.hex"
 `define TB_TOP  arduino_digital_port_control_tb
 module arduino_digital_port_control_tb;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
+`include "user_tasks.sv"
 
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
-	reg            flag                 ;
+reg            flag                 ;
 
 parameter P_FSM_C      = 4'b0000; // Command Phase Only
 parameter P_FSM_CW     = 4'b0001; // Command + Write DATA Phase Only
@@ -129,7 +111,6 @@
 parameter P_QDDR   = 2'b11;
 
         
-	integer    d_risc_id;
     integer    channel,level;
 
          integer i,j;
@@ -137,18 +118,8 @@
 
 
 
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock = 0;
-	        flag  = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
+	   flag  = 0;
 	end
 
 	`ifdef WFDUMP
@@ -173,7 +144,7 @@
 		$display("Monitor: Standalone User Risc Boot Test Started");
    
        init();
-       wait_riscv_boot(d_risc_id);
+       wait_riscv_boot();
 
 		// Remove Wb Reset
 		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
@@ -238,15 +209,15 @@
 	  $display("###################################################");
       if(test_fail == 0) begin
 	    `ifdef GL
-	           $display("Monitor: Ardunio Digital Port Control  (GL) Passed");
+	           $display("Monitor: %m (GL) Passed");
 	    `else
-	       $display("Monitor: Ardunio Digital Port Control (RTL) Passed");
+	       $display("Monitor: %m (RTL) Passed");
 	    `endif
 	  end else begin
 	  `ifdef GL
-	      $display("Monitor: Ardunio Digital Port Control (GL) Failed");
+	      $display("Monitor: %m (GL) Failed");
 	  `else
-	      $display("Monitor: Ardunio Digital Port Control (RTL) Failed");
+	      $display("Monitor: %m (RTL) Failed");
 	  `endif
 	  end
 	    $display("###################################################");
@@ -254,43 +225,6 @@
 	    $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 
@@ -378,136 +312,6 @@
 
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_gpio_intr/Makefile b/verilog/dv/arduino_gpio_intr/Makefile
index 0912a65..ec277ae 100644
--- a/verilog/dv/arduino_gpio_intr/Makefile
+++ b/verilog/dv/arduino_gpio_intr/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/arduino_gpio_intr/arduino_gpio_intr_tb.v b/verilog/dv/arduino_gpio_intr/arduino_gpio_intr_tb.v
index 035faac..23e360e 100644
--- a/verilog/dv/arduino_gpio_intr/arduino_gpio_intr_tb.v
+++ b/verilog/dv/arduino_gpio_intr/arduino_gpio_intr_tb.v
@@ -75,32 +75,14 @@
 `define TB_TOP arduino_gpio_intr_tb
 
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+parameter real CLK1_PERIOD  = 20; // 50MHz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
+`include "user_tasks.sv"
 
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
     //----------------------------------
     // Uart Configuration
     // ---------------------------------
@@ -123,26 +105,15 @@
 
 	reg [31:0]     check_sum            ;
         
-	integer    d_risc_id;
 
          integer i,j;
 
 
 
 
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock = 0;
 	    flag  = 0;
         compare_start = 0;
-        wbd_ext_cyc_i ='h0;  // strobe/request
-        wbd_ext_stb_i ='h0;  // strobe/request
-        wbd_ext_adr_i ='h0;  // address
-        wbd_ext_we_i  ='h0;  // write
-        wbd_ext_dat_i ='h0;  // data output
-        wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -286,7 +257,7 @@
 		$value$plusargs("risc_core_id=%d", d_risc_id);
  
 	    init();
-       	wait_riscv_boot(d_risc_id);
+       	wait_riscv_boot();
 
 		#200; // Wait for reset removal
 	    repeat (10) @(posedge clock);
@@ -387,58 +358,21 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone String (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone String (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone String (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone String (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 //assign io_in[21] = 1'b0; // CLOCK
@@ -458,14 +392,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -518,142 +452,6 @@
 	);
 
 
-//----------------------------
-// All the task are defined here
-//----------------------------
-
-
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_hello_world/Makefile b/verilog/dv/arduino_hello_world/Makefile
index 06f0645..ef9a591 100644
--- a/verilog/dv/arduino_hello_world/Makefile
+++ b/verilog/dv/arduino_hello_world/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v b/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v
index 8fac63c..44b41db 100644
--- a/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v
+++ b/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v
@@ -75,32 +75,13 @@
 `define TB_HEX "arduino_hello_world.hex"
 `define TB_TOP  arduino_hello_world_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
         //----------------------------------
         // Uart Configuration
         // ---------------------------------
@@ -120,25 +101,14 @@
         reg 	       uart_fifo_enable     ;	// fifo mode disable
 	reg            flag                 ;
         
-	integer    d_risc_id;
 
          integer i,j;
 
 
 
 
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock = 0;
 	        flag  = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -189,7 +159,7 @@
                uart_parity_en          = 0; // parity enable
                uart_even_odd_parity    = 1; // 0: odd parity; 1: even parity
 	       tb_set_uart_baud(50000000,230400,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
-               uart_timeout            = 2000;// wait time limit
+               uart_timeout            = 500;// wait time limit
                uart_fifo_enable        = 0;	// fifo mode disable
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
@@ -199,7 +169,7 @@
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 	       init();
-	       wait_riscv_boot(d_risc_id);
+	       wait_riscv_boot();
 		// Remove Wb Reset
 		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
@@ -220,12 +190,12 @@
                      wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
                 end
 
-                repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
                 tb_uart.uart_init;
                 tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
                                                uart_stick_parity, uart_timeout, uart_divisor);
 
+                repeat (1000) @(posedge clock);  // wait for Processor Get Ready
 	        flag  = 1;
                 
                 
@@ -267,63 +237,21 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone Hello World (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone Hello World (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone Hello World (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone Hello World (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 assign io_in[21] = 1'b0; // CLOCK
@@ -343,14 +271,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -403,136 +331,6 @@
 	);
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_i2c_scaner/Makefile b/verilog/dv/arduino_i2c_scaner/Makefile
index 06dc4bd..0c8a874 100644
--- a/verilog/dv/arduino_i2c_scaner/Makefile
+++ b/verilog/dv/arduino_i2c_scaner/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -105,24 +105,24 @@
 	rm *.o *.a
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner_tb.v b/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner_tb.v
index 6cb6a4d..ace2a5b 100644
--- a/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner_tb.v
+++ b/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner_tb.v
@@ -75,32 +75,13 @@
 `define TB_HEX "arduino_i2c_scaner.hex"
 `define TB_TOP  arduino_i2c_scaner_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
     //----------------------------------
     // Uart Configuration
     // ---------------------------------
@@ -123,26 +104,14 @@
 
 	reg [31:0]     check_sum            ;
         
-	integer    d_risc_id;
 
          integer i,j;
 
 
 
-
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock = 0;
 	    flag  = 0;
         compare_start = 0;
-        wbd_ext_cyc_i ='h0;  // strobe/request
-        wbd_ext_stb_i ='h0;  // strobe/request
-        wbd_ext_adr_i ='h0;  // address
-        wbd_ext_we_i  ='h0;  // write
-        wbd_ext_dat_i ='h0;  // data output
-        wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -200,19 +169,20 @@
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
 
+       init();
 		#200; // Wait for reset removal
 	    repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 		// Remove Wb Reset
-		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
 	    repeat (2) @(posedge clock);
 		#1;
         // Remove all the reset
         if(d_risc_id == 0) begin
              $display("STATUS: Working with Risc core 0");
-             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+             //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
         end else if(d_risc_id == 1) begin
              $display("STATUS: Working with Risc core 1");
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -224,6 +194,7 @@
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
         end
 
+        wait_riscv_boot();
         repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
 	    tb_uart.debug_mode = 0; // disable debug display
@@ -237,7 +208,7 @@
          u_i2c_slave_3.debug = 0; // disable i2c bfm debug message
          u_i2c_slave_4.debug = 0; // disable i2c bfm debug message
 
-        repeat (45000) @(posedge clock);  // wait for Processor Get Ready
+        repeat (1000) @(posedge clock);  // wait for Processor Get Ready
 	    flag  = 0;
 		check_sum = 0;
         compare_start = 1;
@@ -274,66 +245,23 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone i2c scanner (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone i2c scanner (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone i2c scanner (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone i2c scanner (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK 
+assign io_in[5]  = 1'b1; // RESET
 
 //---------------------------
 // I2C
@@ -389,14 +317,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -448,136 +376,6 @@
 	.rxd                 (uart_txd           )
 	);
 
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_i2c_wr_rd/Makefile b/verilog/dv/arduino_i2c_wr_rd/Makefile
index b868513..2dc17d6 100644
--- a/verilog/dv/arduino_i2c_wr_rd/Makefile
+++ b/verilog/dv/arduino_i2c_wr_rd/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -105,24 +105,24 @@
 	rm *.o *.a
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd_tb.v b/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd_tb.v
index ee7124a..3c94c7d 100644
--- a/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd_tb.v
+++ b/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd_tb.v
@@ -75,32 +75,13 @@
 `define TB_HEX "arduino_i2c_wr_rd.hex"
 `define TB_TOP arduino_i2c_wr_rd_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
     //----------------------------------
     // Uart Configuration
     // ---------------------------------
@@ -123,26 +104,14 @@
 
 	reg [31:0]     check_sum            ;
         
-	integer    d_risc_id;
 
          integer i,j;
 
 
 
-
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock = 0;
 	    flag  = 0;
         compare_start = 0;
-        wbd_ext_cyc_i ='h0;  // strobe/request
-        wbd_ext_stb_i ='h0;  // strobe/request
-        wbd_ext_adr_i ='h0;  // address
-        wbd_ext_we_i  ='h0;  // write
-        wbd_ext_dat_i ='h0;  // data output
-        wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -200,19 +169,20 @@
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
 
+       init();
 		#200; // Wait for reset removal
 	    repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 		// Remove Wb Reset
-		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
 	    repeat (2) @(posedge clock);
 		#1;
         // Remove all the reset
         if(d_risc_id == 0) begin
              $display("STATUS: Working with Risc core 0");
-             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+             //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
         end else if(d_risc_id == 1) begin
              $display("STATUS: Working with Risc core 1");
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -224,6 +194,7 @@
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
         end
 
+        wait_riscv_boot();
         repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
 	    tb_uart.debug_mode = 0; // disable debug display
@@ -234,7 +205,7 @@
          u_i2c_slave_0.debug = 1; // disable i2c bfm debug message
          u_i2c_slave_1.debug = 1; // disable i2c bfm debug message
 
-        repeat (45000) @(posedge clock);  // wait for Processor Get Ready
+        repeat (1000) @(posedge clock);  // wait for Processor Get Ready
 	    flag  = 0;
 		check_sum = 0;
         compare_start = 1;
@@ -271,63 +242,21 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone i2c scanner (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone i2c scanner (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone i2c scanner (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone i2c scanner (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 
@@ -370,14 +299,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -415,7 +344,6 @@
            .io3    (flash_io3)
     );
 
-//-------------------------------------
 //---------------------------
 //  UART Agent integration
 // --------------------------
@@ -430,136 +358,6 @@
 	.rxd                 (uart_txd           )
 	);
 
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_multi_serial/Makefile b/verilog/dv/arduino_multi_serial/Makefile
index 2c7cd0d..42a61f3 100644
--- a/verilog/dv/arduino_multi_serial/Makefile
+++ b/verilog/dv/arduino_multi_serial/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v b/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v
index 8a969ad..fc55f4c 100644
--- a/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v
+++ b/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v
@@ -71,37 +71,17 @@
 `include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
 `include "is62wvs1288.v"
 `include "uart_agent.v"
-`include "user_params.svh"
 
 `define TB_HEX "arduino_multi_serial.hex"
 `define TB_TOP  arduino_multi_serial_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
         //----------------------------------
         // Uart Configuration
         // ---------------------------------
@@ -124,27 +104,11 @@
 
 	reg [31:0]     check_sum            ;
         
-	integer    d_risc_id;
 
          integer i,j,k,l;
 
 
 
-
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-	        flag  = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
-
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
@@ -188,19 +152,18 @@
        
 
 	initial begin
-        uart_data_bit           = 2'b11;
-        uart_stop_bits          = 0; // 0: 1 stop bit; 1: 2 stop bit;
-        uart_stick_parity       = 0; // 1: force even parity
-        uart_parity_en          = 0; // parity enable
-        uart_even_odd_parity    = 1; // 0: odd parity; 1: even parity
-	    tb_set_uart_baud(50000000,288000,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
-        uart_timeout            = 2000;// wait time limit
-        uart_fifo_enable        = 0;	// fifo mode disable
+               uart_data_bit           = 2'b11;
+               uart_stop_bits          = 0; // 0: 1 stop bit; 1: 2 stop bit;
+               uart_stick_parity       = 0; // 1: force even parity
+               uart_parity_en          = 0; // parity enable
+               uart_even_odd_parity    = 1; // 0: odd parity; 1: even parity
+	       tb_set_uart_baud(50000000,288000,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
+               uart_timeout            = 2000;// wait time limit
+               uart_fifo_enable        = 0;	// fifo mode disable
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
+        init();
 
-	   init();
-	   wait_riscv_boot(d_risc_id);
 
 		#200; // Wait for reset removal
 	        repeat (10) @(posedge clock);
@@ -211,155 +174,114 @@
 
 	        repeat (2) @(posedge clock);
 		#1;
-        // Remove all the reset
-        if(d_risc_id == 0) begin
-             $display("STATUS: Working with Risc core 0");
-             //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
-        end else if(d_risc_id == 1) begin
-             $display("STATUS: Working with Risc core 1");
-             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
-        end else if(d_risc_id == 2) begin
-             $display("STATUS: Working with Risc core 2");
-             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h41F);
-        end else if(d_risc_id == 3) begin
-             $display("STATUS: Working with Risc core 3");
-             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
-        end
+                // Remove all the reset
+                if(d_risc_id == 0) begin
+                     $display("STATUS: Working with Risc core 0");
+                     //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+                end else if(d_risc_id == 1) begin
+                     $display("STATUS: Working with Risc core 1");
+                     wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
+                end else if(d_risc_id == 2) begin
+                     $display("STATUS: Working with Risc core 2");
+                     wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h41F);
+                end else if(d_risc_id == 3) begin
+                     $display("STATUS: Working with Risc core 3");
+                     wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
+                end
 
-        repeat (100) @(posedge clock);  // wait for Processor Get Ready
+                wait_riscv_boot();
 
-	    tb_uart0.debug_mode = 1; // enable debug display
-        tb_uart0.uart_init;
-        tb_uart0.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
+                repeat (100) @(posedge clock);  // wait for Processor Get Ready
+
+	            tb_uart0.debug_mode = 1; // enable debug display
+                tb_uart0.uart_init;
+                tb_uart0.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
                                                uart_stick_parity, uart_timeout, uart_divisor);
 	        
-		tb_uart1.debug_mode = 1; // enable debug display
-        tb_uart1.uart_init;
-        tb_uart1.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
+		        tb_uart1.debug_mode = 1; // enable debug display
+                tb_uart1.uart_init;
+                tb_uart1.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
                                                uart_stick_parity, uart_timeout, uart_divisor);
 
-        repeat (5000) @(posedge clock);  // wait for Processor Get Ready
-	    flag  = 0;
-		check_sum = 0;
+                repeat (10000) @(posedge clock);  // wait for Processor Get Ready
+	            flag  = 0;
+		        check_sum = 0;
                 
-        for (i=0; i<40; i=i+1)
-            uart0_write_data[i] = $random;
+                for (i=0; i<40; i=i+1)
+                    uart0_write_data[i] = $random;
                 
-	    for (i=0; i<40; i=i+1)
-            uart1_write_data[i] = $random;
+	            for (i=0; i<40; i=i+1)
+                    uart1_write_data[i] = $random;
                 
-        fork
-		//Drive UART-0
-        begin
-           for (i=0; i<40; i=i+1)
-           begin
-              $display ("\n... UART-0 Agent Writing char %x ...", uart0_write_data[i]);
-              tb_uart0.write_char (uart0_write_data[i]);
-           end
-        end
+                fork
+		   //Drive UART-0
+                   begin
+                      for (i=0; i<40; i=i+1)
+                      begin
+                        $display ("\n... UART-0 Agent Writing char %x ...", uart0_write_data[i]);
+                         tb_uart0.write_char (uart0_write_data[i]);
+                      end
+                   end
                    
-		//Drive UART-1
-		begin
-           for (j=0; j<40; j=j+1)
-           begin
-              $display ("\n... UART-1 Agent Writing char %x ...", uart1_write_data[j]);
-              tb_uart1.write_char (uart1_write_data[j]);
-           end
-        end
+		   //Drive UART-1
+		   begin
+                      for (j=0; j<40; j=j+1)
+                      begin
+                        $display ("\n... UART-1 Agent Writing char %x ...", uart1_write_data[j]);
+                         tb_uart1.write_char (uart1_write_data[j]);
+                      end
+                   end
 		   
-		//Receive UART-0
-        begin
-           for (k=0; k<40; k=k+1)
-           begin
-              tb_uart0.read_char_chk(uart1_write_data[k]);
-           end
-        end
+		   //Receive UART-0
+                   begin
+                      for (k=0; k<40; k=k+1)
+                      begin
+                        tb_uart0.read_char_chk(uart1_write_data[k]);
+                      end
+                   end
 		   
-		//Receive UART-1
-        begin
-           for (l=0; l<40; l=l+1)
-           begin
-              tb_uart1.read_char_chk(uart0_write_data[l]);
-           end
-        end
-        join
+		   //Receive UART-1
+                   begin
+                      for (l=0; l<40; l=l+1)
+                      begin
+                        tb_uart1.read_char_chk(uart0_write_data[l]);
+                      end
+                   end
+                   join
                 
-        test_fail = 0;
-        #100
-           tb_uart0.report_status(uart_rx_nu, uart_tx_nu);
-           if(uart_tx_nu != 40) test_fail = 1;
-           if(uart_rx_nu != 40) test_fail = 1;
+                   test_fail = 0;
+                   #100
+                   tb_uart0.report_status(uart_rx_nu, uart_tx_nu);
+                   if(uart_tx_nu != 40) test_fail = 1;
+                   if(uart_rx_nu != 40) test_fail = 1;
 
-           tb_uart1.report_status(uart_rx_nu, uart_tx_nu);
-           if(uart_tx_nu != 40) test_fail = 1;
-           if(uart_rx_nu != 40) test_fail = 1;
+                   tb_uart1.report_status(uart_rx_nu, uart_tx_nu);
+                   if(uart_tx_nu != 40) test_fail = 1;
+                   if(uart_rx_nu != 40) test_fail = 1;
                 
 	   
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone Multi Serial (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone Multi Serial (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone Multi Serial (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone Multi Serial (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 assign io_in[21] = 1'b0 ; // SPIS SCK 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
@@ -369,14 +291,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -441,136 +363,6 @@
 	.rxd                 (uart1_txd          )
 	);
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_risc_boot/Makefile b/verilog/dv/arduino_risc_boot/Makefile
index 68dd9fc..7437a10 100644
--- a/verilog/dv/arduino_risc_boot/Makefile
+++ b/verilog/dv/arduino_risc_boot/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -104,24 +104,24 @@
 	rm *.o *.a
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/arduino_risc_boot/arduino_risc_boot.ino.cpp b/verilog/dv/arduino_risc_boot/arduino_risc_boot.ino.cpp
index c663a26..9ee2dfb 100644
--- a/verilog/dv/arduino_risc_boot/arduino_risc_boot.ino.cpp
+++ b/verilog/dv/arduino_risc_boot/arduino_risc_boot.ino.cpp
@@ -1,31 +1,16 @@
 #include <Arduino.h>
 #define uint32_t  long
 
-#define reg_mprj_globl_reg0   (*(volatile uint32_t*)0x10020000) // Chip ID
-#define reg_mprj_globl_reg1   (*(volatile uint32_t*)0x10020004) // Global Config-0
-#define reg_mprj_globl_reg2   (*(volatile uint32_t*)0x10020008) // Global Config-1
-#define reg_mprj_globl_reg3   (*(volatile uint32_t*)0x1002000C) // Global Interrupt Mask
-#define reg_mprj_globl_reg4   (*(volatile uint32_t*)0x10020010) // Global Interrupt
-#define reg_mprj_globl_reg5   (*(volatile uint32_t*)0x10020014) // Multi functional sel
-#define reg_mprj_globl_soft0  (*(volatile uint32_t*)0x10020018) // Sof Register-0
-#define reg_mprj_globl_soft1  (*(volatile uint32_t*)0x1002001C) // Sof Register-1
-#define reg_mprj_globl_soft2  (*(volatile uint32_t*)0x10020020) // Sof Register-2
-#define reg_mprj_globl_soft3  (*(volatile uint32_t*)0x10020024) // Sof Register-3
-#define reg_mprj_globl_soft4  (*(volatile uint32_t*)0x10020028) // Sof Register-4
-#define reg_mprj_globl_soft5  (*(volatile uint32_t*)0x1002002C) // Sof Register-5
-
-
-
 void setup();
 void loop();
 void setup() {
   // put your setup code here, to run once:
-    reg_mprj_globl_soft0  = 0x11223344; 
-    reg_mprj_globl_soft1  = 0x22334455; 
-    reg_mprj_globl_soft2  = 0x33445566; 
-    reg_mprj_globl_soft3  = 0x44556677; 
-    reg_mprj_globl_soft4  = 0x55667788; 
-    reg_mprj_globl_soft5  = 0x66778899; 
+    GLBL_REG(GLBL_SOFT_REG0)  = 0x11223344; 
+    GLBL_REG(GLBL_SOFT_REG1)  = 0x22334455; 
+    GLBL_REG(GLBL_SOFT_REG2)  = 0x33445566; 
+    GLBL_REG(GLBL_SOFT_REG3)  = 0x44556677; 
+    GLBL_REG(GLBL_SOFT_REG4)  = 0x55667788; 
+    GLBL_REG(GLBL_SOFT_REG5)  = 0x66778899; 
 
 }
 
diff --git a/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v b/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v
index eb4d0d0..c4b21ff 100644
--- a/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v
+++ b/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v
@@ -73,52 +73,15 @@
 `define TB_TOP  arduino_risc_boot_tb
 
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20;
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
-
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
-	integer    d_risc_id;
+`include "user_tasks.sv"
 
 
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
-
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
@@ -130,43 +93,42 @@
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
 
+        init();
+
 		#200; // Wait for reset removal
-	        repeat (10) @(posedge clock);
+	     repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 		// Remove Wb Reset
 		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
-	        repeat (2) @(posedge clock);
+	    repeat (2) @(posedge clock);
 		#1;
 		// Remove all the reset
 		if(d_risc_id == 0) begin
 		     $display("STATUS: Working with Risc core 0");
-                     wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+             //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
 		end else if(d_risc_id == 1) begin
 		     $display("STATUS: Working with Risc core 1");
-                     wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
+             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
 		end
 
+        wait_riscv_boot();
 
-		// Repeat cycles of 1000 clock edges as needed to complete testbench
-		repeat (40) begin
-			repeat (1000) @(posedge clock);
-			// $display("+1000 cycles");
-		end
+        repeat (10000) @(posedge clock);  // wait for Processor Get Ready
 
 
 		$display("Monitor: Reading Back the expected value");
 		// User RISC core expect to write these value in global
 		// register, read back and decide on pass fail
 		// 0x30000018  = 0x11223344; 
-                // 0x3000001C  = 0x22334455; 
-                // 0x30000020  = 0x33445566; 
-                // 0x30000024  = 0x44556677; 
-                // 0x30000028 = 0x55667788; 
-                // 0x3000002C = 0x66778899; 
+        // 0x3000001C  = 0x22334455; 
+        // 0x30000020  = 0x33445566; 
+        // 0x30000024  = 0x44556677; 
+        // 0x30000028 = 0x55667788; 
+        // 0x3000002C = 0x66778899; 
 
-                test_fail = 0;
+        test_fail = 0;
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_0,read_data,32'h11223344);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_1,read_data,32'h22334455);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_2,read_data,32'h33445566);
@@ -179,63 +141,21 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[0]  = 1'b1; // RESET
 assign io_in[16] = 1'b0 ; // SPIS SCK 
@@ -303,137 +223,6 @@
 //-------------------------------------
 
 
-
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_string/Makefile b/verilog/dv/arduino_string/Makefile
index bf750df..a0279dd 100644
--- a/verilog/dv/arduino_string/Makefile
+++ b/verilog/dv/arduino_string/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -104,24 +104,24 @@
 	rm *.o *.a
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/arduino_string/arduino_string_tb.v b/verilog/dv/arduino_string/arduino_string_tb.v
index f57b93f..a02727a 100644
--- a/verilog/dv/arduino_string/arduino_string_tb.v
+++ b/verilog/dv/arduino_string/arduino_string_tb.v
@@ -74,32 +74,13 @@
 `define TB_HEX "arduino_string.hex"
 `define TB_TOP  arduino_string_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
     //----------------------------------
     // Uart Configuration
     // ---------------------------------
@@ -122,26 +103,15 @@
 
 	reg [31:0]     check_sum            ;
         
-	integer    d_risc_id;
 
          integer i,j;
 
 
 
 
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock = 0;
 	    flag  = 0;
         compare_start = 0;
-        wbd_ext_cyc_i ='h0;  // strobe/request
-        wbd_ext_stb_i ='h0;  // strobe/request
-        wbd_ext_adr_i ='h0;  // address
-        wbd_ext_we_i  ='h0;  // write
-        wbd_ext_dat_i ='h0;  // data output
-        wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -196,20 +166,21 @@
         uart_fifo_enable        = 0;	// fifo mode disable
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
+        init();
 
 		#200; // Wait for reset removal
 	    repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 		// Remove Wb Reset
-		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
 	    repeat (2) @(posedge clock);
 		#1;
         // Remove all the reset
         if(d_risc_id == 0) begin
              $display("STATUS: Working with Risc core 0");
-             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+             //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
         end else if(d_risc_id == 1) begin
              $display("STATUS: Working with Risc core 1");
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -221,6 +192,7 @@
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
         end
 
+        wait_riscv_boot();
         repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
 	    tb_uart.debug_mode = 0; // disable debug display
@@ -228,7 +200,7 @@
         tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
                                        uart_stick_parity, uart_timeout, uart_divisor);
 
-        repeat (60000) @(posedge clock);  // wait for Processor Get Ready
+        repeat (20000) @(posedge clock);  // wait for Processor Get Ready
 	    flag  = 0;
 		check_sum = 0;
         compare_start = 1;
@@ -266,73 +238,23 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone String (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone String (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone String (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone String (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
-
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
-
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
+assign io_in[5]  = 1'b1; // RESET
 
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
@@ -342,14 +264,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -402,135 +324,6 @@
 	);
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_switchCase2/Makefile b/verilog/dv/arduino_switchCase2/Makefile
index 6470aef..0263e17 100644
--- a/verilog/dv/arduino_switchCase2/Makefile
+++ b/verilog/dv/arduino_switchCase2/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -104,24 +104,24 @@
 	rm *.o *.a
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/arduino_switchCase2/arduino_switchCase2_tb.v b/verilog/dv/arduino_switchCase2/arduino_switchCase2_tb.v
index 8a3a7d8..3432fca 100644
--- a/verilog/dv/arduino_switchCase2/arduino_switchCase2_tb.v
+++ b/verilog/dv/arduino_switchCase2/arduino_switchCase2_tb.v
@@ -73,32 +73,15 @@
 `define TB_HEX "arduino_switchCase2.hex"
 `define TB_TOP  arduino_switchCase2_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
 
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
 
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
         //----------------------------------
         // Uart Configuration
         // ---------------------------------
@@ -120,7 +103,6 @@
 
 	reg [31:0]     check_sum            ;
         
-	integer    d_risc_id;
 
          integer i,j;
 
@@ -152,18 +134,9 @@
 
 
 
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
 
 	initial begin
-		clock = 0;
 	        flag  = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -239,29 +212,30 @@
                uart_fifo_enable        = 0;	// fifo mode disable
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
+        init();
 
 		#200; // Wait for reset removal
 	        repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 		// Remove Wb Reset
-		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
 	    repeat (2) @(posedge clock);
 		#1;
         // Remove WB and SPI Reset, Keep SDARM and CORE under Reset
-        wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
+        //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
 
-		// QSPI SRAM:CS#2 Switch to QSPI Mode
-        wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
-		wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL1,{16'h0,1'b0,1'b0,4'b0000,P_MODE_SWITCH_IDLE,P_SINGLE,P_SINGLE,4'b0100});
-		wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL2,{8'h0,2'b00,2'b00,P_FSM_C,8'h00,8'h38});
-		wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_WDATA,32'h0);
+		//// QSPI SRAM:CS#2 Switch to QSPI Mode
+        ////wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
+		//wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL1,{16'h0,1'b0,1'b0,4'b0000,P_MODE_SWITCH_IDLE,P_SINGLE,P_SINGLE,4'b0100});
+		//wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL2,{8'h0,2'b00,2'b00,P_FSM_C,8'h00,8'h38});
+		//wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_WDATA,32'h0);
 
         // Remove all the reset
         if(d_risc_id == 0) begin
            $display("STATUS: Working with Risc core 0");
-           wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+           //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
         end else if(d_risc_id == 1) begin
            $display("STATUS: Working with Risc core 1");
            wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -273,6 +247,8 @@
            wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
         end
 
+        wait_riscv_boot();
+
         repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
 	    tb_uart.debug_mode = 0; // disable debug display
@@ -280,7 +256,7 @@
         tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
                                uart_stick_parity, uart_timeout, uart_divisor);
 
-        repeat (45000) @(posedge clock);  // wait for Processor Get Ready
+        repeat (10000) @(posedge clock);  // wait for Processor Get Ready
 	    flag  = 1;
 		check_sum = 0;
         fork
@@ -322,73 +298,26 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: arduino_switchCase2 (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: arduino_switchCase2 (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: arduino_switchCase2 (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: arduino_switchCase2 (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
 
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK 
+assign io_in[5]  = 1'b1; // RESET
+assign io_in[21] = 1'b0 ; // SPIS SCK 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
@@ -398,14 +327,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -456,136 +385,6 @@
 	.rxd                 (uart_txd           )
 	);
 
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_timer_intr/Makefile b/verilog/dv/arduino_timer_intr/Makefile
index 4a23ffa..aec2931 100644
--- a/verilog/dv/arduino_timer_intr/Makefile
+++ b/verilog/dv/arduino_timer_intr/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -108,24 +108,24 @@
 	rm *.o *.a
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/arduino_timer_intr/arduino_timer_intr_tb.v b/verilog/dv/arduino_timer_intr/arduino_timer_intr_tb.v
index 4107a97..ace0ce7 100644
--- a/verilog/dv/arduino_timer_intr/arduino_timer_intr_tb.v
+++ b/verilog/dv/arduino_timer_intr/arduino_timer_intr_tb.v
@@ -74,32 +74,13 @@
 `define TB_TOP arduino_timer_intr_tb
 
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20;
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
     //----------------------------------
     // Uart Configuration
     // ---------------------------------
@@ -122,26 +103,14 @@
 
 	reg [31:0]     check_sum            ;
         
-	integer    d_risc_id;
 
          integer i,j;
 
 
 
-
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock = 0;
 	    flag  = 0;
         compare_start = 0;
-        wbd_ext_cyc_i ='h0;  // strobe/request
-        wbd_ext_stb_i ='h0;  // strobe/request
-        wbd_ext_adr_i ='h0;  // address
-        wbd_ext_we_i  ='h0;  // write
-        wbd_ext_dat_i ='h0;  // data output
-        wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -204,19 +173,22 @@
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
 
+        init();
+
+
 		#200; // Wait for reset removal
 	    repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 		// Remove Wb Reset
-		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
 	    repeat (2) @(posedge clock);
 		#1;
         // Remove all the reset
         if(d_risc_id == 0) begin
              $display("STATUS: Working with Risc core 0");
-             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+             //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
         end else if(d_risc_id == 1) begin
              $display("STATUS: Working with Risc core 1");
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -228,6 +200,7 @@
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
         end
 
+        wait_riscv_boot();
         repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
 	    tb_uart.debug_mode = 0; // disable debug display
@@ -235,7 +208,7 @@
         tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, 
                                        uart_stick_parity, uart_timeout, uart_divisor);
 
-        repeat (55000) @(posedge clock);  // wait for Processor Get Ready
+        repeat (1000) @(posedge clock);  // wait for Processor Get Ready
 	    flag  = 0;
 		check_sum = 0;
         compare_start = 1;
@@ -253,7 +226,7 @@
               end
            end
            begin
-              repeat (510000) @(posedge clock);  // wait for Processor Get Ready
+              repeat (600000) @(posedge clock);  // wait for Processor Get Ready
            end
            join_any
         
@@ -274,63 +247,21 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone String (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone String (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone String (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone String (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 //assign io_in[16] = 1'b0 ; // SPIS SCK 
@@ -350,14 +281,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -409,141 +340,7 @@
 	);
 
 
-//----------------------------
-// All the task are defined here
-//----------------------------
 
-
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/arduino_ws281x/Makefile b/verilog/dv/arduino_ws281x/Makefile
index 0a22bf8..7d2330e 100644
--- a/verilog/dv/arduino_ws281x/Makefile
+++ b/verilog/dv/arduino_ws281x/Makefile
@@ -29,7 +29,7 @@
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -108,24 +108,24 @@
 	rm *.o *.a
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/arduino_ws281x/arduino_ws281x.ino.cpp b/verilog/dv/arduino_ws281x/arduino_ws281x.ino.cpp
index db5dc4a..a2e3dbf 100644
--- a/verilog/dv/arduino_ws281x/arduino_ws281x.ino.cpp
+++ b/verilog/dv/arduino_ws281x/arduino_ws281x.ino.cpp
@@ -36,7 +36,11 @@
 #include"WS281X.h"
 // These constants won't change. They're used to give names to the pins used:
 
-
+//-------------------
+// We have only 2 WS281X port
+// Port 2 will using port-0 data
+// Port 3 will using port-1 data
+//------------------------
 int port0 = 2;
 int port1 = 3;
 int port2 = 5;
@@ -51,6 +55,7 @@
 
   // Enable WS_281X PORT-0
   ws281x.enable(port0);
+  ws281x.enable(port2);
   ws281x.write(port0, 0x112233);
   ws281x.write(port0, 0x223344);
   ws281x.write(port0, 0x334455);
@@ -70,6 +75,7 @@
   
 // Enable WS_281X PORT-1
   ws281x.enable(port1);
+  ws281x.enable(port3);
   ws281x.write(port1, 0x010203);
   ws281x.write(port1, 0x020304);
   ws281x.write(port1, 0x030405);
@@ -87,43 +93,6 @@
   ws281x.write(port1, 0x0F0001);
   ws281x.write(port1, 0x000102);
 
-// Enable WS_281X PORT-2
-  ws281x.enable(port2);
-  ws281x.write(port2, 0x102030);
-  ws281x.write(port2, 0x203040);
-  ws281x.write(port2, 0x304050);
-  ws281x.write(port2, 0x405060);
-  ws281x.write(port2, 0x506070);
-  ws281x.write(port2, 0x607080);
-  ws281x.write(port2, 0x708090);
-  ws281x.write(port2, 0x8090A0);
-  ws281x.write(port2, 0x90A0B0);
-  ws281x.write(port2, 0xA0B0C0);
-  ws281x.write(port2, 0xB0C0D0);
-  ws281x.write(port2, 0xC0D0E0);
-  ws281x.write(port2, 0xD0E0F0);
-  ws281x.write(port2, 0xE0F000);
-  ws281x.write(port2, 0xF00010);
-  ws281x.write(port2, 0x001020);
-  
-// Enable WS_281X PORT-3
-  ws281x.enable(port3);
-  ws281x.write(port3, 0x012345);
-  ws281x.write(port3, 0x123456);
-  ws281x.write(port3, 0x234567);
-  ws281x.write(port3, 0x345678);
-  ws281x.write(port3, 0x456789);
-  ws281x.write(port3, 0x56789A);
-  ws281x.write(port3, 0x6789AB);
-  ws281x.write(port3, 0x789ABC);
-  ws281x.write(port3, 0x89ABCD);
-  ws281x.write(port3, 0x9ABCDE);
-  ws281x.write(port3, 0xABCDEF);
-  ws281x.write(port3, 0xBCDEF0);
-  ws281x.write(port3, 0xCDEF01);
-  ws281x.write(port3, 0xDEF012);
-  ws281x.write(port3, 0xEF0123);
-  ws281x.write(port3, 0xF01234);
 }
 
 void loop() {
diff --git a/verilog/dv/arduino_ws281x/arduino_ws281x_tb.v b/verilog/dv/arduino_ws281x/arduino_ws281x_tb.v
index a6cc886..43929a1 100644
--- a/verilog/dv/arduino_ws281x/arduino_ws281x_tb.v
+++ b/verilog/dv/arduino_ws281x/arduino_ws281x_tb.v
@@ -75,39 +75,19 @@
 `define TB_TOP arduino_ws281x_tb
 
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
 	reg            flag                 ;
     reg            compare_start        ; // User Need to make sure that compare start match with RiscV core completing initial booting
 
 	reg [31:0]     rx_wcnt              ;
 	reg [31:0]     check_sum            ;
         
-	integer    d_risc_id;
 
          integer i,j;
 
@@ -167,14 +147,14 @@
 *   Pin-8                       GND                  -
 *   Pin-9         20            PB6/WS[1]/XTAL1/TOSC1           digital_io[11]
 *   Pin-10        21            PB7/WS[1]/XTAL2/TOSC2           digital_io[12]
-*   Pin-11        5             PD5/WS[2]/SS[3]/OC0B(PWM1)/T1   digital_io[13]
-*   Pin-12        6             PD6/WS[2]/SS[2]/OC0A(PWM2)/AIN0 digital_io[14]/analog_io[2]
-*   Pin-13        7             PD7/WS[2]/A1N1                  digital_io[15]/analog_io[3]
-*   Pin-14        8             PB0/WS[2]/CLKO/ICP1             digital_io[16]
-*   Pin-15        9             PB1/WS[3]/SS[1]OC1A(PWM3)       digital_io[17]
-*   Pin-16        10            PB2/WS[3]/SS[0]/OC1B(PWM4)      digital_io[18]
-*   Pin-17        11            PB3/WS[3]/MOSI/OC2A(PWM5)       digital_io[19]
-*   Pin-18        12            PB4/WS[3]/MISO                  digital_io[20]
+*   Pin-11        5             PD5/WS[0]/SS[3]/OC0B(PWM1)/T1   digital_io[13]
+*   Pin-12        6             PD6/WS[0]/SS[2]/OC0A(PWM2)/AIN0 digital_io[14]/analog_io[2]
+*   Pin-13        7             PD7/WS[0]/A1N1                  digital_io[15]/analog_io[3]
+*   Pin-14        8             PB0/WS[0]/CLKO/ICP1             digital_io[16]
+*   Pin-15        9             PB1/WS[1]/SS[1]OC1A(PWM3)       digital_io[17]
+*   Pin-16        10            PB2/WS[1]/SS[0]/OC1B(PWM4)      digital_io[18]
+*   Pin-17        11            PB3/WS[1]/MOSI/OC2A(PWM5)       digital_io[19]
+*   Pin-18        12            PB4/WS[1]/MISO                  digital_io[20]
 *   Pin-19        13            PB5/SCK                         digital_io[21]
 *   Pin-20                      AVCC                -
 *   Pin-21                      AREF                            analog_io[10]
@@ -193,20 +173,22 @@
         ws281x_enb              = 0;
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
+        init();
+
 
 		#200; // Wait for reset removal
 	    repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 		// Remove Wb Reset
-		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
 	    repeat (2) @(posedge clock);
 		#1;
         // Remove all the reset
         if(d_risc_id == 0) begin
              $display("STATUS: Working with Risc core 0");
-             wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+             //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
         end else if(d_risc_id == 1) begin
              $display("STATUS: Working with Risc core 1");
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -218,10 +200,11 @@
              wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
         end
 
+        wait_riscv_boot();
         repeat (100) @(posedge clock);  // wait for Processor Get Ready
 
 
-        repeat (40000) @(posedge clock);  // wait for Processor Get Ready
+        repeat (1000) @(posedge clock);  // wait for Processor Get Ready
         ws281x_enb = 1;
 	    flag  = 0;
 		check_sum = 0;
@@ -250,71 +233,29 @@
            // if all the 102 byte received
            // if no error 
            if(rx_wcnt != 64) test_fail = 1;
-           if(check_sum != 32'h2ffe8) test_fail = 1;
+           if(check_sum != 32'h2f0e0) test_fail = 1;
 
 	   
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone String (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone String (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone String (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone String (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
+assign io_in[5]  = 1'b1; // RESET
 //assign io_in[16] = 1'b0 ; // SPIS SCK 
 
 `ifndef GL // Drive Power for Hold Fix Buf
@@ -332,14 +273,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -432,141 +373,6 @@
                   .enb       (ws281x_enb    ),
                   .rxd       (ws281x_port[3])
                );
-//----------------------------
-// All the task are defined here
-//----------------------------
-
-
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/c_func/inc/pwm.h b/verilog/dv/c_func/inc/pwm.h
deleted file mode 100644
index 580a9a8..0000000
--- a/verilog/dv/c_func/inc/pwm.h
+++ /dev/null
@@ -1,8 +0,0 @@
-
-void	InitTimers         ();
-void	InitTimersSafe     ();     //doesn't init timers responsible for time keeping functions
-void	pwmWrite           (uint8_t pin, uint8_t val);
-void	pwmWriteHR         (uint8_t pin, uint16_t val);   //accepts a 16 bit value and maps it down to the timer for maximum resolution
-bool	SetPinFrequency    (int8_t pin, uint32_t frequency);
-bool	SetPinFrequencySafe(int8_t pin, uint32_t frequency);	//does not set timers responsible for time keeping functions
-float	GetPinResolution(uint8_t pin);  //gets the PWM resolution of a pin in base 2, 0 is returned if the pin is not connected to a timer
diff --git a/verilog/dv/agents/caravel_task.sv b/verilog/dv/common/agents/caravel_task.sv
similarity index 97%
rename from verilog/dv/agents/caravel_task.sv
rename to verilog/dv/common/agents/caravel_task.sv
index 8ce81ef..83a9c70 100644
--- a/verilog/dv/agents/caravel_task.sv
+++ b/verilog/dv/common/agents/caravel_task.sv
@@ -38,9 +38,9 @@
 begin
    // Run in Fast Sim Mode
    `ifdef GL
-       force u_top.mprj.u_wb_host._8654_.Q= 1'b1; 
+       force u_top.mprj.u_wb_host.u_reg._8654_.Q= 1'b1; 
    `else
-       force u_top.mprj.u_wb_host.u_fastsim_buf.X = 1'b1; 
+       force u_top.mprj.u_wb_host.u_reg.u_fastsim_buf.X = 1'b1; 
     `endif
 
 end
diff --git a/verilog/dv/agents/test_control.v b/verilog/dv/common/agents/test_control.v
similarity index 100%
rename from verilog/dv/agents/test_control.v
rename to verilog/dv/common/agents/test_control.v
diff --git a/verilog/dv/agents/uart_agent.v b/verilog/dv/common/agents/uart_agent.v
similarity index 100%
rename from verilog/dv/agents/uart_agent.v
rename to verilog/dv/common/agents/uart_agent.v
diff --git a/verilog/dv/agents/uart_master_tasks.sv b/verilog/dv/common/agents/uart_master_tasks.sv
similarity index 100%
rename from verilog/dv/agents/uart_master_tasks.sv
rename to verilog/dv/common/agents/uart_master_tasks.sv
diff --git a/verilog/dv/agents/usb_agents.v b/verilog/dv/common/agents/usb_agents.v
similarity index 100%
rename from verilog/dv/agents/usb_agents.v
rename to verilog/dv/common/agents/usb_agents.v
diff --git a/verilog/dv/common/agents/user_tasks.sv b/verilog/dv/common/agents/user_tasks.sv
new file mode 100644
index 0000000..8365b6b
--- /dev/null
+++ b/verilog/dv/common/agents/user_tasks.sv
@@ -0,0 +1,444 @@
+
+/***********************************************
+
+wire  [15:0]    strap_in;
+assign strap_in[`PSTRAP_CLK_SRC] = 2'b00;            // System Clock Source wbs/riscv: User clock1
+assign strap_in[`PSTRAP_CLK_DIV] = 2'b00;            // Clock Division for wbs/riscv : 0 Div
+assign strap_in[`PSTRAP_UARTM_CFG] = 2'b0;           // uart master config control -  constant value based on system clock selection
+assign strap_in[`PSTRAP_QSPI_SRAM] = 1'b1;           // QSPI SRAM Mode Selection - Quad 
+assign strap_in[`PSTRAP_QSPI_FLASH] = 2'b10;         // QSPI Fash Mode Selection - Quad
+assign strap_in[`PSTRAP_RISCV_RESET_MODE] = 1'b1;    // Riscv Reset control - Removed Riscv on Power On Reset
+assign strap_in[`PSTRAP_RISCV_CACHE_BYPASS] = 1'b0;  // Riscv Cache Bypass: 0 - Cache Enable
+assign strap_in[`PSTRAP_RISCV_SRAM_CLK_EDGE] = 1'b0; // Riscv SRAM clock edge selection: 0 - Normal
+assign strap_in[`PSTRAP_CLK_SKEW] = 2'b00;           // Skew selection 2'b00 - Default value
+
+assign strap_in[`PSTRAP_DEFAULT_VALUE] = 1'b0;       // 0 - Normal
+parameter bit  [15:0] PAD_STRAP = (2'b00 << `PSTRAP_CLK_SRC             ) |
+                                  (2'b00 << `PSTRAP_CLK_DIV             ) |
+                                  (1'b1  << `PSTRAP_UARTM_CFG           ) |
+                                  (1'b1  << `PSTRAP_QSPI_SRAM           ) |
+                                  (2'b10 << `PSTRAP_QSPI_FLASH          ) |
+                                  (1'b1  << `PSTRAP_RISCV_RESET_MODE    ) |
+                                  (1'b1  << `PSTRAP_RISCV_CACHE_BYPASS  ) |
+                                  (1'b1  << `PSTRAP_RISCV_SRAM_CLK_EDGE ) |
+                                  (2'b00 << `PSTRAP_CLK_SKEW            ) |
+                                  (1'b0  << `PSTRAP_DEFAULT_VALUE       ) ;
+****/
+
+//--------------------------------------------------------
+// Pad Pull-up/down initialization based on Boot Mode
+//---------------------------------------------------------
+
+`ifdef RISC_BOOT // RISCV Based Test case
+parameter bit  [15:0] PAD_STRAP = 16'b0000_0001_1010_0000;
+`else
+parameter bit  [15:0] PAD_STRAP = 16'b0000_0000_1010_0000;
+`endif
+
+//-------------------------------------------------------------
+// Variable Decleration
+//-------------------------------------------------------------
+
+reg            clock         ;
+reg            clock2        ;
+reg            xtal_clk      ;
+reg            wb_rst_i      ;
+
+reg            power1, power2;
+reg            power3, power4;
+
+// Wishbone Interface
+reg            wbd_ext_cyc_i ;  // strobe/request
+reg            wbd_ext_stb_i ;  // strobe/request
+reg [31:0]     wbd_ext_adr_i ;  // address
+reg            wbd_ext_we_i  ;  // write
+reg [31:0]     wbd_ext_dat_i ;  // data output
+reg [3:0]      wbd_ext_sel_i ;  // byte enable
+
+wire [31:0]    wbd_ext_dat_o ;  // data input
+wire           wbd_ext_ack_o ;  // acknowlegement
+wire           wbd_ext_err_o ;  // error
+
+// User I/O
+wire [37:0]    io_oeb        ;
+wire [37:0]    io_out        ;
+wire [37:0]    io_in         ;
+reg  [127:0]   la_data_in;
+
+reg            test_fail     ;
+reg [31:0]     write_data    ;
+reg [31:0]     read_data     ;
+integer    d_risc_id;
+
+
+wire USER_VDD1V8 = 1'b1;
+wire VSS = 1'b0;
+
+//-----------------------------------------
+// Clock Decleration
+//-----------------------------------------
+
+always #(CLK1_PERIOD/2) clock  <= (clock === 1'b0);
+always #(CLK2_PERIOD/2) clock2 <= (clock2 === 1'b0);
+always #(XTAL_PERIOD/2) xtal_clk <= (xtal_clk === 1'b0);
+
+
+//-----------------------------------------
+// Variable Initiatlization
+//-----------------------------------------
+initial
+begin
+   // Run in Fast Sim Mode
+   `ifdef GL
+       force u_top.u_wb_host.u_reg._8654_.Q= 1'b1; 
+   `else
+       force u_top.u_wb_host.u_reg.u_fastsim_buf.X = 1'b1; 
+    `endif
+
+    clock = 0;
+    clock2 = 0;
+    xtal_clk = 0;
+    test_fail = 0;
+    wbd_ext_cyc_i ='h0;  // strobe/request
+    wbd_ext_stb_i ='h0;  // strobe/request
+    wbd_ext_adr_i ='h0;  // address
+    wbd_ext_we_i  ='h0;  // write
+    wbd_ext_dat_i ='h0;  // data output
+    wbd_ext_sel_i ='h0;  // byte enable
+	la_data_in = 1;
+end
+//-----------------------------------------
+// DUT Instatiation
+//-----------------------------------------
+user_project_wrapper u_top(
+`ifdef USE_POWER_PINS
+    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
+    .vssd1(VSS),	// User area 1 digital ground
+`endif
+    .wb_clk_i        (clock),  // System clock
+    .user_clock2     (clock2),  // Real-time clock
+    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
+
+    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
+    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
+    .wbs_adr_i   (wbd_ext_adr_i),  // address
+    .wbs_we_i    (wbd_ext_we_i),  // write
+    .wbs_dat_i   (wbd_ext_dat_i),  // data output
+    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
+
+    .wbs_dat_o   (wbd_ext_dat_o),  // data input
+    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
+
+ 
+    // Logic Analyzer Signals
+    .la_data_in      (la_data_in) ,
+    .la_data_out     (),
+    .la_oenb         ('0),
+ 
+
+    // IOs
+    .io_in          (io_in )  ,
+    .io_out         (io_out) ,
+    .io_oeb         (io_oeb) ,
+
+    .user_irq       () 
+
+);
+
+//--------------------------------------------------------
+// Apply Reset Sequence and wait for reset completion
+//-------------------------------------------------------
+
+task init;
+begin
+   //#1 - Apply Reset
+   #1000 wb_rst_i = 0; 
+   repeat (10) @(posedge clock);
+   #1000 wb_rst_i = 1; 
+
+   //#3 - Remove Reset
+   #1000 wb_rst_i = 0; 
+   repeat (10) @(posedge clock);
+   //#4 - Wait for Power on reset removal
+   wait(u_top.p_reset_n == 1);          
+
+   // #5 - Wait for system reset removal
+   wait(u_top.s_reset_n == 1);          // Wait for system reset removal
+   repeat (10) @(posedge clock);
+
+  end
+endtask
+
+//-----------------------------------------------
+// Apply user defined strap at power-on
+//-----------------------------------------------
+
+task         apply_strap;
+input [15:0] strap;
+begin
+
+   repeat (10) @(posedge clock);
+   //#1 - Apply Reset
+   wb_rst_i = 1; 
+   //#2 - Apply Strap
+   force u_top.io_in[36:29] = strap[15:8];
+   force u_top.io_in[20:13] = strap[7:0];
+   repeat (10) @(posedge clock);
+    
+   //#3 - Remove Reset
+   wb_rst_i = 0; // Remove Reset
+
+   //#4 - Wait for Power on reset removal
+   wait(u_top.p_reset_n == 1);          
+
+   // #5 - Release the Strap
+   release u_top.io_in[36:29];
+   release u_top.io_in[20:13];
+
+   // #6 - Wait for system reset removal
+   wait(u_top.s_reset_n == 1);          // Wait for system reset removal
+   repeat (10) @(posedge clock);
+
+end
+endtask
+
+//---------------------------------------------------------
+// Create Pull Up/Down Based on Reset Strap Parameter
+//---------------------------------------------------------
+genvar gCnt;
+generate
+ for(gCnt=0; gCnt<16; gCnt++) begin : g_strap
+    if(gCnt < 8) begin
+       if(PAD_STRAP[gCnt]) begin
+           pullup(io_in[13+gCnt]); 
+       end else begin
+           pulldown(io_in[13+gCnt]); 
+       end
+    end else begin
+       if(PAD_STRAP[gCnt]) begin
+           pullup(io_in[29+gCnt-8]); 
+       end else begin
+           pulldown(io_in[29+gCnt-8]); 
+       end
+    end
+ end 
+endgenerate
+
+`ifdef RISC_BOOT // RISCV Based Test case
+//-------------------------------------------
+task wait_riscv_boot;
+begin
+   // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+   // bit[7:0]  - core-0
+   // bit[15:8]  - core-1
+   // bit[23:16] - core-2
+   // bit[31:24] - core-3
+   $display("Status:  Waiting for RISCV Core Boot ... ");
+   read_data = 0;
+   //while((read_data >> (d_risc_id*8)) != 8'h1) begin
+   while(read_data  != 8'h1) begin // Temp fix - Hardcoded to risc_id = 0
+       wb_user_core_read(`ADDR_SPACE_GLBL+`GLBL_CFG_MAIL_BOX,read_data);
+	    repeat (100) @(posedge clock);
+   end
+
+   $display("Status:  RISCV Core is Booted ");
+
+end
+endtask
+
+task wait_riscv_exit;
+begin
+   // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+   // bit[7:0]  - core-0
+   // bit[15:8]  - core-1
+   // bit[23:16] - core-2
+   // bit[31:24] - core-3
+   $display("Status:  Waiting for RISCV Core Boot ... ");
+   read_data = 0;
+   //while((read_data >> (d_risc_id*8)) != 8'hFF) begin
+   while(read_data != 8'hFF) begin
+       wb_user_core_read(`ADDR_SPACE_GLBL+`GLBL_CFG_MAIL_BOX,read_data);
+	    repeat (1000) @(posedge clock);
+   end
+
+   $display("Status:  RISCV Core is Booted ");
+
+end
+endtask
+
+//-----------------------
+// Set TB ready indication
+//-----------------------
+task set_tb_ready;
+begin
+   // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+   // bit[7:0]  - core-0
+   // bit[15:8]  - core-1
+   // bit[23:16] - core-2
+   // bit[31:24] - core-3
+   wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MAIL_BOX,32'h81818181);
+
+   $display("Status:  Set TB Ready Indication");
+
+end
+endtask
+
+`endif
+
+//-------------------------------
+// Wishbone Write
+//-------------------------------
+task wb_user_core_write;
+input [31:0] address;
+input [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h1;  // write
+  wbd_ext_dat_i =data;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
+  repeat (2) @(posedge clock);
+end
+endtask
+
+
+//--------------------------------------
+// Wishbone Read
+//--------------------------------------
+task  wb_user_core_read;
+input [31:0] address;
+output [31:0] data;
+reg    [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='0;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(negedge clock);
+  data  = wbd_ext_dat_o;  
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
+  repeat (2) @(posedge clock);
+end
+endtask
+
+
+//--------------------------------------
+// Wishbone Read and compare
+//--------------------------------------
+task  wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg    [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='0;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(negedge clock);
+  data  = wbd_ext_dat_o;  
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  if(data !== cmp_data) begin
+     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+     test_fail = 1;
+  end else begin
+     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
+  end
+  repeat (2) @(posedge clock);
+end
+endtask
+
+
+task  wb_user_core_read_cmp;
+input [31:0] address;
+input [31:0] cmp_data;
+reg    [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='0;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(negedge clock);
+  data  = wbd_ext_dat_o;  
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  if(data !== cmp_data) begin
+     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+     test_fail = 1;
+  end else begin
+     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
+  end
+  repeat (2) @(posedge clock);
+end
+endtask
+
+
+/**
+`ifdef GL
+//-----------------------------------------------------------------------------
+// RISC IMEM amd DMEM Monitoring TASK
+//-----------------------------------------------------------------------------
+
+`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
+
+always@(posedge `RISC_CORE.wb_clk) begin
+    if(`RISC_CORE.wbd_imem_ack_i)
+          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
+    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
+          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
+    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
+          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
+end
+
+`endif
+**/
+
diff --git a/verilog/dv/bfm/bfm_ad5205.sv b/verilog/dv/common/bfm/bfm_ad5205.sv
similarity index 100%
rename from verilog/dv/bfm/bfm_ad5205.sv
rename to verilog/dv/common/bfm/bfm_ad5205.sv
diff --git a/verilog/dv/bfm/bfm_spim.v b/verilog/dv/common/bfm/bfm_spim.v
similarity index 100%
rename from verilog/dv/bfm/bfm_spim.v
rename to verilog/dv/common/bfm/bfm_spim.v
diff --git a/verilog/dv/bfm/bfm_ws281x.sv b/verilog/dv/common/bfm/bfm_ws281x.sv
similarity index 100%
rename from verilog/dv/bfm/bfm_ws281x.sv
rename to verilog/dv/common/bfm/bfm_ws281x.sv
diff --git a/verilog/dv/bfm/usb1d_defines.v b/verilog/dv/common/bfm/usb1d_defines.v
similarity index 100%
rename from verilog/dv/bfm/usb1d_defines.v
rename to verilog/dv/common/bfm/usb1d_defines.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_core.v b/verilog/dv/common/bfm/usb_device/core/usb1d_core.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_core.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_core.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_crc16.v b/verilog/dv/common/bfm/usb_device/core/usb1d_crc16.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_crc16.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_crc16.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_crc5.v b/verilog/dv/common/bfm/usb_device/core/usb1d_crc5.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_crc5.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_crc5.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_ctrl.v b/verilog/dv/common/bfm/usb_device/core/usb1d_ctrl.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_ctrl.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_ctrl.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_fifo2.v b/verilog/dv/common/bfm/usb_device/core/usb1d_fifo2.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_fifo2.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_fifo2.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_generic_dpram.v b/verilog/dv/common/bfm/usb_device/core/usb1d_generic_dpram.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_generic_dpram.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_generic_dpram.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_generic_fifo.v b/verilog/dv/common/bfm/usb_device/core/usb1d_generic_fifo.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_generic_fifo.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_generic_fifo.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_idma.v b/verilog/dv/common/bfm/usb_device/core/usb1d_idma.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_idma.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_idma.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_pa.v b/verilog/dv/common/bfm/usb_device/core/usb1d_pa.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_pa.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_pa.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_pd.v b/verilog/dv/common/bfm/usb_device/core/usb1d_pd.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_pd.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_pd.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_pe.v b/verilog/dv/common/bfm/usb_device/core/usb1d_pe.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_pe.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_pe.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_pl.v b/verilog/dv/common/bfm/usb_device/core/usb1d_pl.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_pl.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_pl.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_rom1.v b/verilog/dv/common/bfm/usb_device/core/usb1d_rom1.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_rom1.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_rom1.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_sync_fifo.v b/verilog/dv/common/bfm/usb_device/core/usb1d_sync_fifo.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_sync_fifo.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_sync_fifo.v
diff --git a/verilog/dv/bfm/usb_device/core/usb1d_utmi_if.v b/verilog/dv/common/bfm/usb_device/core/usb1d_utmi_if.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/core/usb1d_utmi_if.v
rename to verilog/dv/common/bfm/usb_device/core/usb1d_utmi_if.v
diff --git a/verilog/dv/bfm/usb_device/phy/usb1d_phy.v b/verilog/dv/common/bfm/usb_device/phy/usb1d_phy.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/phy/usb1d_phy.v
rename to verilog/dv/common/bfm/usb_device/phy/usb1d_phy.v
diff --git a/verilog/dv/bfm/usb_device/phy/usb1d_rx_phy.v b/verilog/dv/common/bfm/usb_device/phy/usb1d_rx_phy.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/phy/usb1d_rx_phy.v
rename to verilog/dv/common/bfm/usb_device/phy/usb1d_rx_phy.v
diff --git a/verilog/dv/bfm/usb_device/phy/usb1d_tx_phy.v b/verilog/dv/common/bfm/usb_device/phy/usb1d_tx_phy.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/phy/usb1d_tx_phy.v
rename to verilog/dv/common/bfm/usb_device/phy/usb1d_tx_phy.v
diff --git a/verilog/dv/bfm/usb_device/top/usb1d_top.v b/verilog/dv/common/bfm/usb_device/top/usb1d_top.v
similarity index 100%
rename from verilog/dv/bfm/usb_device/top/usb1d_top.v
rename to verilog/dv/common/bfm/usb_device/top/usb1d_top.v
diff --git a/verilog/dv/bfm/usbd_files.v b/verilog/dv/common/bfm/usbd_files.v
similarity index 100%
rename from verilog/dv/bfm/usbd_files.v
rename to verilog/dv/common/bfm/usbd_files.v
diff --git a/verilog/dv/firmware/LICENSE b/verilog/dv/common/firmware/LICENSE
similarity index 100%
rename from verilog/dv/firmware/LICENSE
rename to verilog/dv/common/firmware/LICENSE
diff --git a/verilog/dv/firmware/common.mk b/verilog/dv/common/firmware/common.mk
similarity index 100%
rename from verilog/dv/firmware/common.mk
rename to verilog/dv/common/firmware/common.mk
diff --git a/verilog/dv/firmware/common_bthread.c b/verilog/dv/common/firmware/common_bthread.c
similarity index 100%
rename from verilog/dv/firmware/common_bthread.c
rename to verilog/dv/common/firmware/common_bthread.c
diff --git a/verilog/dv/firmware/common_bthread.h b/verilog/dv/common/firmware/common_bthread.h
similarity index 100%
rename from verilog/dv/firmware/common_bthread.h
rename to verilog/dv/common/firmware/common_bthread.h
diff --git a/verilog/dv/firmware/common_misc.h b/verilog/dv/common/firmware/common_misc.h
similarity index 100%
rename from verilog/dv/firmware/common_misc.h
rename to verilog/dv/common/firmware/common_misc.h
diff --git a/verilog/dv/firmware/crt.S b/verilog/dv/common/firmware/crt.S
similarity index 100%
rename from verilog/dv/firmware/crt.S
rename to verilog/dv/common/firmware/crt.S
diff --git a/verilog/dv/firmware/crt_tcm.S b/verilog/dv/common/firmware/crt_tcm.S
similarity index 100%
rename from verilog/dv/firmware/crt_tcm.S
rename to verilog/dv/common/firmware/crt_tcm.S
diff --git a/verilog/dv/firmware/csr.h b/verilog/dv/common/firmware/csr.h
similarity index 100%
rename from verilog/dv/firmware/csr.h
rename to verilog/dv/common/firmware/csr.h
diff --git a/verilog/dv/c_func/inc/ext_reg_map.h b/verilog/dv/common/firmware/ext_reg_map.h
similarity index 89%
rename from verilog/dv/c_func/inc/ext_reg_map.h
rename to verilog/dv/common/firmware/ext_reg_map.h
index c5a46c0..7be283e 100644
--- a/verilog/dv/c_func/inc/ext_reg_map.h
+++ b/verilog/dv/common/firmware/ext_reg_map.h
@@ -16,6 +16,14 @@
 #define reg_glbl_strap_sticky  (*(volatile uint32_t*)0x30020034)  // reg_6 -  RTC/USB Clock control
 #define reg_glbl_system_strap  (*(volatile uint32_t*)0x30020038)  // reg_6 -  RTC/USB Clock control
 #define reg_glbl_mail_box      (*(volatile uint32_t*)0x3002003C)  // reg_15 - Mail Box
+#define reg_glbl_soft_reg_0    (*(volatile uint32_t*)0x30020040)  // reg_16 - Soft Register-0
+#define reg_glbl_soft_reg_1    (*(volatile uint32_t*)0x30020044)  // reg_17 - Soft Register-1
+#define reg_glbl_soft_reg_2    (*(volatile uint32_t*)0x30020048)  // reg_18 - Soft Register-2
+#define reg_glbl_soft_reg_3    (*(volatile uint32_t*)0x3002004C)  // reg_19 - Soft Register-3
+#define reg_glbl_soft_reg_4    (*(volatile uint32_t*)0x30020050)  // reg_20 - Soft Register-4
+#define reg_glbl_soft_reg_5    (*(volatile uint32_t*)0x30020054)  // reg_21 - Soft Register-5
+#define reg_glbl_soft_reg_6    (*(volatile uint32_t*)0x30020058)  // reg_22 - Soft Register-6
+#define reg_glbl_soft_reg_7    (*(volatile uint32_t*)0x3002005C)  // reg_23 - Soft Register-7
 
 #define reg_gpio_dsel         (*(volatile uint32_t*)0x30020080)  // reg_0  - GPIO Direction Select
 #define reg_gpio_type         (*(volatile uint32_t*)0x30020084)  // reg_1  - GPIO TYPE - Static/Waveform
diff --git a/verilog/dv/c_func/inc/int_reg_map.h b/verilog/dv/common/firmware/int_reg_map.h
similarity index 95%
rename from verilog/dv/c_func/inc/int_reg_map.h
rename to verilog/dv/common/firmware/int_reg_map.h
index 3e38aed..fa79ec1 100644
--- a/verilog/dv/c_func/inc/int_reg_map.h
+++ b/verilog/dv/common/firmware/int_reg_map.h
@@ -12,9 +12,11 @@
 #define reg_glbl_intr          (*(volatile uint32_t*)0x10020010)  // reg_4  - Global Interrupt
 #define reg_glbl_multi_func    (*(volatile uint32_t*)0x10020014)  // reg_5 -  GPIO Multi Function
 #define reg_glbl_clk_ctrl      (*(volatile uint32_t*)0x10020018)  // reg_6 -  RTC/USB Clock control
-#define reg_glbl_pad_strap     (*(volatile uint32_t*)0x10020030)  // reg_6 -  RTC/USB Clock control
-#define reg_glbl_strap_sticky  (*(volatile uint32_t*)0x10020034)  // reg_6 -  RTC/USB Clock control
-#define reg_glbl_system_strap  (*(volatile uint32_t*)0x10020038)  // reg_6 -  RTC/USB Clock control
+#define reg_glbl_pll_ctrl1     (*(volatile uint32_t*)0x1002001C)  // reg_7 -  PLL Control-1
+#define reg_glbl_pll_ctrl2     (*(volatile uint32_t*)0x10020020)  // reg_8 -  PLL Control-2
+#define reg_glbl_pad_strap     (*(volatile uint32_t*)0x10020030)  // reg_12 - Pad Strap
+#define reg_glbl_strap_sticky  (*(volatile uint32_t*)0x10020034)  // reg_13 - Strap Sticky
+#define reg_glbl_system_strap  (*(volatile uint32_t*)0x10020038)  // reg_14 - System Strap
 #define reg_glbl_mail_box      (*(volatile uint32_t*)0x1002003C)  // reg_15 - Mail Box
 #define reg_glbl_soft_reg_0    (*(volatile uint32_t*)0x10020040)  // reg_16 - Soft Register-0
 #define reg_glbl_soft_reg_1    (*(volatile uint32_t*)0x10020044)  // reg_17 - Soft Register-1
diff --git a/verilog/dv/firmware/link.ld b/verilog/dv/common/firmware/link.ld
similarity index 100%
rename from verilog/dv/firmware/link.ld
rename to verilog/dv/common/firmware/link.ld
diff --git a/verilog/dv/firmware/link_tcm.ld b/verilog/dv/common/firmware/link_tcm.ld
similarity index 100%
rename from verilog/dv/firmware/link_tcm.ld
rename to verilog/dv/common/firmware/link_tcm.ld
diff --git a/verilog/dv/firmware/reloc.h b/verilog/dv/common/firmware/reloc.h
similarity index 100%
rename from verilog/dv/firmware/reloc.h
rename to verilog/dv/common/firmware/reloc.h
diff --git a/verilog/dv/firmware/riscv_csr_encoding.h b/verilog/dv/common/firmware/riscv_csr_encoding.h
similarity index 100%
rename from verilog/dv/firmware/riscv_csr_encoding.h
rename to verilog/dv/common/firmware/riscv_csr_encoding.h
diff --git a/verilog/dv/firmware/riscv_macros.h b/verilog/dv/common/firmware/riscv_macros.h
similarity index 100%
rename from verilog/dv/firmware/riscv_macros.h
rename to verilog/dv/common/firmware/riscv_macros.h
diff --git a/verilog/dv/firmware/sc_print.c b/verilog/dv/common/firmware/sc_print.c
similarity index 100%
rename from verilog/dv/firmware/sc_print.c
rename to verilog/dv/common/firmware/sc_print.c
diff --git a/verilog/dv/firmware/sc_print.h b/verilog/dv/common/firmware/sc_print.h
similarity index 100%
rename from verilog/dv/firmware/sc_print.h
rename to verilog/dv/common/firmware/sc_print.h
diff --git a/verilog/dv/firmware/sc_test.h b/verilog/dv/common/firmware/sc_test.h
similarity index 100%
rename from verilog/dv/firmware/sc_test.h
rename to verilog/dv/common/firmware/sc_test.h
diff --git a/verilog/dv/firmware/ycr_specific.h b/verilog/dv/common/firmware/ycr_specific.h
similarity index 100%
rename from verilog/dv/firmware/ycr_specific.h
rename to verilog/dv/common/firmware/ycr_specific.h
diff --git a/verilog/dv/model/i2c_slave_model.v b/verilog/dv/common/model/i2c_slave_model.v
similarity index 100%
rename from verilog/dv/model/i2c_slave_model.v
rename to verilog/dv/common/model/i2c_slave_model.v
diff --git a/verilog/dv/model/is62wvs1288.v b/verilog/dv/common/model/is62wvs1288.v
similarity index 100%
rename from verilog/dv/model/is62wvs1288.v
rename to verilog/dv/common/model/is62wvs1288.v
diff --git a/verilog/dv/model/mt48lc8m8a2.v b/verilog/dv/common/model/mt48lc8m8a2.v
similarity index 100%
rename from verilog/dv/model/mt48lc8m8a2.v
rename to verilog/dv/common/model/mt48lc8m8a2.v
diff --git a/verilog/dv/model/s25fl256s.sv b/verilog/dv/common/model/s25fl256s.sv
similarity index 100%
rename from verilog/dv/model/s25fl256s.sv
rename to verilog/dv/common/model/s25fl256s.sv
diff --git a/verilog/dv/model/spiram.v b/verilog/dv/common/model/spiram.v
similarity index 100%
rename from verilog/dv/model/spiram.v
rename to verilog/dv/common/model/spiram.v
diff --git a/verilog/dv/common/riscduino_board b/verilog/dv/common/riscduino_board
index ec9ef12..f0e1866 160000
--- a/verilog/dv/common/riscduino_board
+++ b/verilog/dv/common/riscduino_board
@@ -1 +1 @@
-Subproject commit ec9ef12933c2435d28bb91d4f653bfc99377f151
+Subproject commit f0e1866cea67544ef6a71839ddb50a806979d1a4
diff --git a/verilog/dv/vpi/system/system.c b/verilog/dv/common/vpi/system/system.c
similarity index 100%
rename from verilog/dv/vpi/system/system.c
rename to verilog/dv/common/vpi/system/system.c
diff --git a/verilog/dv/risc_boot/Makefile b/verilog/dv/risc_boot/Makefile
index f9bb9f4..db9d549 100644
--- a/verilog/dv/risc_boot/Makefile
+++ b/verilog/dv/risc_boot/Makefile
@@ -58,7 +58,7 @@
 
 ############## USER SPECIFIC DEFINE ##################
 
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 
 ######################################################
 
diff --git a/verilog/dv/risc_boot/risc_boot_tb.v b/verilog/dv/risc_boot/risc_boot_tb.v
index ee52d59..51bde45 100644
--- a/verilog/dv/risc_boot/risc_boot_tb.v
+++ b/verilog/dv/risc_boot/risc_boot_tb.v
@@ -132,7 +132,7 @@
            $dumpfile("simx.vcd");
            $dumpvars(1,risc_boot_tb);
            //$dumpvars(1,risc_boot_tb.u_spi_flash_256mb);
-           //$dumpvars(2,risc_boot_tb.u_top);
+           $dumpvars(2,risc_boot_tb.u_top);
            $dumpvars(1,risc_boot_tb.u_top.mprj);
            $dumpvars(0,risc_boot_tb.u_top.mprj.u_wb_host);
            //$dumpvars(0,risc_boot_tb.tb_uart);
@@ -151,9 +151,9 @@
 		$display("%c[1;31m",27);
 		$display ("##########################################################");
 		`ifdef GL
-			$display ("Monitor: Timeout, Test Risc Boot (GL) Failed");
+			$display ("Monitor: Timeout, %m (GL) Failed");
 		`else
-			$display ("Monitor: Timeout, Test Risc Boot (RTL) Failed");
+			$display ("Monitor: Timeout, %m (RTL) Failed");
 		`endif
 		$display ("##########################################################");
 		$display("%c[0m",27);
@@ -186,7 +186,7 @@
 					     uart_stick_parity, uart_timeout, uart_divisor);
 
 
-                wait_riscv_boot(d_risc_id);
+                wait_riscv_boot();
 		repeat (50000) @(posedge clock);  
 
 		for (i=0; i<40; i=i+1)
@@ -228,15 +228,15 @@
               $display("###################################################");
               if(test_fail == 0) begin
                  `ifdef GL
-                     $display("Monitor: Standalone User Risc Boot Test (GL) Passed");
+                     $display("Monitor: %m (GL) Passed");
                  `else
-                     $display("Monitor: Standalone User Risc Boot Test (RTL) Passed");
+                     $display("Monitor: %m (RTL) Passed");
                  `endif
               end else begin
                   `ifdef GL
-                      $display("Monitor: Standalone User Risc Boot Test (GL) Failed");
+                      $display("Monitor: %m (GL) Failed");
                   `else
-                      $display("Monitor: Standalone User Risc Boot Test (RTL) Failed");
+                      $display("Monitor: %m (RTL) Failed");
                   `endif
                end
               $display("###################################################");
diff --git a/verilog/dv/risc_boot/user_uart.c b/verilog/dv/risc_boot/user_uart.c
index b19a157..c9f5dd3 100644
--- a/verilog/dv/risc_boot/user_uart.c
+++ b/verilog/dv/risc_boot/user_uart.c
@@ -16,7 +16,7 @@
 // SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
 // //////////////////////////////////////////////////////////////////////////
 #define SC_SIM_OUTPORT (0xf0000000)
-#include "../c_func/inc/int_reg_map.h"
+#include "int_reg_map.h"
 #include "common_misc.h"
 #include "common_bthread.h"
 
diff --git a/verilog/dv/uart_master/uart_master.c b/verilog/dv/uart_master/uart_master.c
index e1a4bf0..991bdc5 100644
--- a/verilog/dv/uart_master/uart_master.c
+++ b/verilog/dv/uart_master/uart_master.c
@@ -18,7 +18,6 @@
 // This include is relative to $CARAVEL_PATH (see Makefile)
 #include <defs.h>
 #include <stub.c>
-#include "../c_func/inc/ext_reg_map.h"
 
 // User Project Slaves (0x3000_0000)
 
diff --git a/verilog/dv/uart_master/uart_master_tb.v b/verilog/dv/uart_master/uart_master_tb.v
index ea30b91..2a99ff7 100644
--- a/verilog/dv/uart_master/uart_master_tb.v
+++ b/verilog/dv/uart_master/uart_master_tb.v
@@ -53,6 +53,7 @@
 reg [31:0]     read_data     ;
 reg            flag;
 reg            test_fail     ;
+reg  [15:0]    strap_in;
 
 
 	assign checkbits = mprj_io[31:16];
@@ -74,9 +75,9 @@
 		$dumpfile("simx.vcd");
 		$dumpvars(2, `TB_TOP);
 		$dumpvars(0, `TB_TOP.tb_master_uart);
-		$dumpvars(0, `TB_TOP.uut.mprj.u_wb_host.u_uart2wb);
+		$dumpvars(0, `TB_TOP.u_top.mprj.u_wb_host.u_uart2wb);
 		$dumpvars(1, `TB_TOP.tb_master_uart);
-		$dumpvars(0, `TB_TOP.uut.mprj.u_pinmux);
+		$dumpvars(0, `TB_TOP.u_top.mprj.u_pinmux);
 	end
        `endif
 
@@ -90,9 +91,9 @@
 		$display("%c[1;31m",27);
 		$display ("##########################################################");
 		`ifdef GL
-		   $display ("Monitor: Timeout, Test UART Master (GL) Failed");
+		   $display ("Monitor: Timeout, %m (GL) Failed");
 		`else
-		   $display ("Monitor: Timeout, Test UART Master (RTL) Failed");
+		   $display ("Monitor: Timeout, %m (RTL) Failed");
 		`endif
 		$display ("##########################################################");
 		$display("%c[0m",27);
@@ -100,6 +101,11 @@
 	end
 
 	initial begin
+
+            strap_in = 0;
+            strap_in[`PSTRAP_UARTM_CFG] = 0; // uart master config control - load from LA
+            apply_strap(strap_in);
+
             uart_data_bit           = 2'b11;
             uart_stop_bits          = 0; // 0: 1 stop bit; 1: 2 stop bit;
             uart_stick_parity       = 0; // 1: force even parity
@@ -156,15 +162,15 @@
            $display("###################################################");
            if(test_fail == 0) begin
               `ifdef GL
-                  $display("Monitor: Standalone User UART Master (GL) Passed");
+                  $display("Monitor: %m (GL) Passed");
               `else
-                  $display("Monitor: Standalone User Uart Master (RTL) Passed");
+                  $display("Monitor: %m (RTL) Passed");
               `endif
            end else begin
                `ifdef GL
-                   $display("Monitor: Standalone User Uart Master (GL) Failed");
+                   $display("Monitor: %m (GL) Failed");
                `else
-                   $display("Monitor: Standalone User Uart Master (RTL) Failed");
+                   $display("Monitor: %m (RTL) Failed");
                `endif
             end
            $display("###################################################");
@@ -212,7 +218,7 @@
 	wire USER_VDD1V8 = power4;
 	wire VSS = 1'b0;
 
-	caravel uut (
+	caravel u_top (
 		.vddio	  (VDD3V3),
 		.vssio	  (VSS),
 		.vdda	  (VDD3V3),
@@ -263,8 +269,8 @@
 // --------------------------
 wire uart_txd,uart_rxd;
 
-assign uart_txd   = mprj_io[23];
-assign mprj_io[22]  = uart_rxd ;
+assign uart_txd   = mprj_io[7];
+assign mprj_io[6]  = uart_rxd ;
  
 uart_agent tb_master_uart(
 	.mclk                (clock              ),
@@ -273,6 +279,7 @@
 	);
 
 
+`include "caravel_task.sv"
 `include "uart_master_tasks.sv"
 
 endmodule
diff --git a/verilog/dv/user_aes/Makefile b/verilog/dv/user_aes/Makefile
index 1ba7631..c68a4d1 100644
--- a/verilog/dv/user_aes/Makefile
+++ b/verilog/dv/user_aes/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -61,24 +61,24 @@
 	rm crt.o user_aes.o
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/user_aes/user_aes.c b/verilog/dv/user_aes/user_aes.c
index cd1bfec..2830ebe 100644
--- a/verilog/dv/user_aes/user_aes.c
+++ b/verilog/dv/user_aes/user_aes.c
@@ -29,6 +29,9 @@
 #define ECB 1
 
 #include "aes.h"
+#include "int_reg_map.h"
+#include "common_misc.h"
+#include "common_bthread.h"
 
 
 static void phex(uint8_t* str);
@@ -40,21 +43,6 @@
 static int test_decrypt_ecb(void);
 static void test_encrypt_ecb_verbose(void);
 
-#define reg_mprj_globl_reg0  (*(volatile uint32_t*)0x10020000) // Chip ID
-#define reg_mprj_globl_reg1  (*(volatile uint32_t*)0x10020004) // Global Config-0
-#define reg_mprj_globl_reg2  (*(volatile uint32_t*)0x10020008) // Global Config-1
-#define reg_mprj_globl_reg3  (*(volatile uint32_t*)0x1002000C) // Global Interrupt Mask
-#define reg_mprj_globl_reg4  (*(volatile uint32_t*)0x10020010) // Global Interrupt
-#define reg_mprj_globl_reg5  (*(volatile uint32_t*)0x10020014) // Multi functional sel
-#define reg_mprj_globl_soft0  (*(volatile uint32_t*)0x10020018) // Sof Register-0
-#define reg_mprj_globl_soft1  (*(volatile uint32_t*)0x1002001C) // Sof Register-1
-#define reg_mprj_globl_soft2  (*(volatile uint32_t*)0x10020020) // Sof Register-2
-#define reg_mprj_globl_soft3  (*(volatile uint32_t*)0x10020024) // Sof Register-3
-#define reg_mprj_globl_soft4 (*(volatile uint32_t*)0x10020028) // Sof Register-4
-#define reg_mprj_globl_soft5 (*(volatile uint32_t*)0x1002002C) // Sof Register-5
-
-#define reg_mprg_gpio_odata (*(volatile uint32_t*)0x1002004C)
-
 int main(void)
 {
     int exit;
@@ -69,35 +57,46 @@
     //printf("You need to specify a symbol between AES128, AES192 or AES256. Exiting");
     return 0;
 #endif
+   reg_glbl_cfg0 |= 0x1F;       // Remove Reset for UART
+   reg_glbl_multi_func &=0x7FFFFFFF; // Disable UART Master Bit[31] = 0
+   reg_glbl_multi_func |=0x100; // Enable UART Multi func
+   reg_uart0_ctrl = 0x07;       // Enable Uart Access {3'h0,2'b00,1'b1,1'b1,1'b1}
+   // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+   // bit[7:0]   - core-0
+   // bit[15:8]  - core-1
+   // bit[23:16] - core-2
+   // bit[31:24] - core-3
 
-    reg_mprg_gpio_odata  = 0x00000100; 
-    reg_mprj_globl_soft0  = 0x00000000; 
+   reg_glbl_mail_box = 0x1 << (bthread_get_core_id() * 8); // Start of Main 
+
+    reg_gpio_odata  = 0x00000100; 
+    reg_glbl_soft_reg_0  = 0x00000000; 
     exit = test_encrypt_cbc();
-    reg_mprg_gpio_odata  = 0x00000200; 
-    reg_mprj_globl_soft0  = exit;
+    reg_gpio_odata  = 0x00000200; 
+    reg_glbl_soft_reg_0  = exit;
     exit += test_decrypt_cbc();
-    reg_mprg_gpio_odata  = 0x00000300; 
-    reg_mprj_globl_soft0  = exit;
+    reg_gpio_odata  = 0x00000300; 
+    reg_glbl_soft_reg_0  = exit;
     exit += test_encrypt_ctr();
-    reg_mprg_gpio_odata  = 0x00000400; 
-    reg_mprj_globl_soft0  = exit;
+    reg_gpio_odata  = 0x00000400; 
+    reg_glbl_soft_reg_0  = exit;
     exit += test_decrypt_ctr();
-    reg_mprg_gpio_odata  = 0x00000500; 
-    reg_mprj_globl_soft0  = exit;
+    reg_gpio_odata  = 0x00000500; 
+    reg_glbl_soft_reg_0  = exit;
     exit += test_decrypt_ecb();
-    reg_mprg_gpio_odata  = 0x00000600; 
-    reg_mprj_globl_soft0  = exit;
+    reg_gpio_odata  = 0x00000600; 
+    reg_glbl_soft_reg_0  = exit;
     exit += test_encrypt_ecb();
-    reg_mprg_gpio_odata  = 0x00000700; 
-    reg_mprj_globl_soft0  = exit;
+    reg_gpio_odata  = 0x00000700; 
+    reg_glbl_soft_reg_0  = exit;
     test_encrypt_ecb_verbose();
-    reg_mprg_gpio_odata  = 0x00000800; 
-    reg_mprj_globl_soft0  = exit;
+    reg_gpio_odata  = 0x00000800; 
+    reg_glbl_soft_reg_0  = exit;
 
     if(exit == 0) {
-        reg_mprg_gpio_odata  = 0x00001800; 
+        reg_gpio_odata  = 0x00001800; 
     } else {
-        reg_mprg_gpio_odata  = 0x0000A800; 
+        reg_gpio_odata  = 0x0000A800; 
     }
 
     return exit;
diff --git a/verilog/dv/user_aes/user_aes_tb.v b/verilog/dv/user_aes/user_aes_tb.v
index 769596e..3d47bd3 100644
--- a/verilog/dv/user_aes/user_aes_tb.v
+++ b/verilog/dv/user_aes/user_aes_tb.v
@@ -69,33 +69,13 @@
 `include "uart_agent.v"
 module user_aes_tb;
 
-reg clock;
-reg wb_rst_i;
-reg power1, power2;
-reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-reg        wbd_ext_cyc_i;  // strobe/request
-reg        wbd_ext_stb_i;  // strobe/request
-reg [31:0] wbd_ext_adr_i;  // address
-reg        wbd_ext_we_i;  // write
-reg [31:0] wbd_ext_dat_i;  // data output
-reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-wire [31:0] wbd_ext_dat_o;  // data input
-wire        wbd_ext_ack_o;  // acknowlegement
-wire        wbd_ext_err_o;  // error
-
-// User I/O
-wire [37:0] io_oeb;
-wire [37:0] io_out;
-wire [37:0] io_in;
-
-wire gpio;
-wire [37:0] mprj_io;
-wire [7:0] mprj_io_0;
-reg         test_fail;
-reg [31:0] read_data;
-integer    d_risc_id;
 
 //----------------------------------
 // Uart Configuration
@@ -116,11 +96,6 @@
 reg 	       uart_fifo_enable     ;	// fifo mode disable
 
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
 
      /************* Port-B Mapping **********************************
      *   Pin-14       PB0/CLKO/ICP1             digital_io[11]
@@ -144,7 +119,6 @@
 			     };
 	initial begin
 		test_fail = 0;
-		clock = 0;
                 wbd_ext_cyc_i ='h0;  // strobe/request
                 wbd_ext_stb_i ='h0;  // strobe/request
                 wbd_ext_adr_i ='h0;  // address
@@ -165,6 +139,7 @@
 	initial begin
 
 	       $value$plusargs("risc_core_id=%d", d_risc_id);
+           init();
 
                uart_data_bit           = 2'b11;
                uart_stop_bits          = 0; // 0: 1 stop bit; 1: 2 stop bit;
@@ -180,17 +155,18 @@
                $display("Monitor: Standalone User Uart Test Started");
                
                // Remove Wb Reset
-               wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+               //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
                // Enable UART Multi Functional Ports
                wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h100);
                
+                wait_riscv_boot();
                repeat (2) @(posedge clock);
                #1;
 		// Remove all the reset
 		if(d_risc_id == 0) begin
 		     $display("STATUS: Working with Risc core 0");
-                     wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+                   //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
 		end else if(d_risc_id == 1) begin
 		     $display("STATUS: Working with Risc core 1");
                      wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -214,13 +190,19 @@
 		// Set the GPIO Output data: 0x00000000
                 wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_ODATA,'h0000000);
    
-               fork
+              fork
 	          begin
                      repeat (1400000) @(posedge clock); 
 	          end
 	          begin
                      wait(port_b_in == 8'h18);
 	          end
+	          begin
+                     while(1) begin
+                        wb_user_core_read(`ADDR_SPACE_GPIO+`GPIO_CFG_ODATA,read_data);
+                        repeat (1000) @(posedge clock); 
+                     end
+	          end
                join_any
 	
 	       wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_0,read_data,32'h00000000);
@@ -228,15 +210,15 @@
                $display("###################################################");
                if(test_fail == 0) begin
                   `ifdef GL
-                      $display("Monitor: Standalone User AES Test (GL) Passed");
+                      $display("Monitor: %m (GL) Passed");
                   `else
-                      $display("Monitor: Standalone User AES Test (RTL) Passed");
+                      $display("Monitor: %m (RTL) Passed");
                   `endif
                end else begin
                    `ifdef GL
-                       $display("Monitor: Standalone User AES Test (GL) Failed");
+                       $display("Monitor: %m (GL) Failed");
                    `else
-                       $display("Monitor: Standalone User AES Test (RTL) Failed");
+                       $display("Monitor: %m (RTL) Failed");
                    `endif
                 end
                $display("###################################################");
@@ -245,80 +227,34 @@
 
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
 
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
 
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK 
+assign io_in[5]  = 1'b1; // RESET
+assign io_in[21] = 1'b0 ; // SPIS SCK 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
 //  user core using the gpio pads
 //  ----------------------------------------------------
 
-   wire flash_clk = io_out[24];
-   wire flash_csb = io_out[25];
+   wire flash_clk = io_out[28];
+   wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[29];
-   wire #1 io_oeb_30 = io_oeb[30];
-   wire #1 io_oeb_31 = io_oeb[31];
-   wire #1 io_oeb_32 = io_oeb[32];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+   wire #1 io_oeb_29 = io_oeb[33];
+   wire #1 io_oeb_30 = io_oeb[34];
+   wire #1 io_oeb_31 = io_oeb[35];
+   wire #1 io_oeb_32 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
 
-   assign io_in[29] = flash_io0;
-   assign io_in[30] = flash_io1;
-   assign io_in[31] = flash_io2;
-   assign io_in[32] = flash_io3;
+   assign io_in[33] = flash_io0;
+   assign io_in[34] = flash_io1;
+   assign io_in[35] = flash_io2;
+   assign io_in[36] = flash_io3;
 
    // Quard flash
      s25fl256s #(.mem_file_name("user_aes.hex"),
@@ -343,8 +279,8 @@
 // --------------------------
 wire uart_txd,uart_rxd;
 
-assign uart_txd   = io_out[2];
-assign io_in[1]  = uart_rxd ;
+assign uart_txd   = io_out[7];
+assign io_in[6]  = uart_rxd ;
  
 uart_agent tb_uart(
 	.mclk                (clock              ),
@@ -353,135 +289,7 @@
 	);
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
 
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/user_basic/Makefile b/verilog/dv/user_basic/Makefile
index c1ad8ae..1067943 100644
--- a/verilog/dv/user_basic/Makefile
+++ b/verilog/dv/user_basic/Makefile
@@ -73,7 +73,7 @@
 endif
 
 %.vcd: %.vvp
-	vvp $<
+	vvp $< 
 
 
 # ---- Clean ----
diff --git a/verilog/dv/user_basic/user_basic_tb.v b/verilog/dv/user_basic/user_basic_tb.v
index 3317eab..2a1858d 100644
--- a/verilog/dv/user_basic/user_basic_tb.v
+++ b/verilog/dv/user_basic/user_basic_tb.v
@@ -76,48 +76,23 @@
 `include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
 `include "user_params.svh"
 
-module user_basic_tb;
-parameter CLK1_PERIOD = 10;
-parameter CLK2_PERIOD = 2.5;
-parameter IPLL_PERIOD = 5.008;
-parameter XTAL_PERIOD = 6;
+`define TB_TOP user_basic_tb
 
-reg            clock         ;
-reg            clock2        ;
-reg            xtal_clk      ;
-reg            wb_rst_i      ;
-reg            power1, power2;
-reg            power3, power4;
+module `TB_TOP;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-reg            wbd_ext_cyc_i;  // strobe/request
-reg            wbd_ext_stb_i;  // strobe/request
-reg [31:0]     wbd_ext_adr_i;  // address
-reg            wbd_ext_we_i;  // write
-reg [31:0]     wbd_ext_dat_i;  // data output
-reg [3:0]      wbd_ext_sel_i;  // byte enable
-
-wire [31:0]    wbd_ext_dat_o;  // data input
-wire           wbd_ext_ack_o;  // acknowlegement
-wire           wbd_ext_err_o;  // error
-
-// User I/O
-wire [37:0]    io_oeb        ;
-wire [37:0]    io_out        ;
-wire [37:0]    io_in         ;
-
-wire [37:0]    mprj_io       ;
-wire [7:0]     mprj_io_0     ;
-reg            test_fail     ;
-reg [31:0]     write_data     ;
-reg [31:0]     read_data     ;
+`include "user_tasks.sv"
 //----------------------------------
 // Uart Configuration
 // ---------------------------------
 reg [1:0]      uart_data_bit        ;
-reg	       uart_stop_bits       ; // 0: 1 stop bit; 1: 2 stop bit;
-reg	       uart_stick_parity    ; // 1: force even parity
-reg	       uart_parity_en       ; // parity enable
-reg	       uart_even_odd_parity ; // 0: odd parity; 1: even parity
+reg	           uart_stop_bits       ; // 0: 1 stop bit; 1: 2 stop bit;
+reg	           uart_stick_parity    ; // 1: force even parity
+reg	           uart_parity_en       ; // parity enable
+reg	           uart_even_odd_parity ; // 0: odd parity; 1: even parity
 
 reg [7:0]      uart_data            ;
 reg [15:0]     uart_divisor         ;	// divided by n * 16
@@ -133,6 +108,7 @@
 reg  [15:0]    strap_in;
 wire [31:0]    strap_sticky;
 reg  [7:0]     test_id;
+reg  [25:0]    bcount;
 
 assign io_in = {26'h0,xtal_clk,11'h0};
 
@@ -208,51 +184,29 @@
 
 integer i,j;
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
 
-	always #(CLK1_PERIOD/2) clock  <= (clock === 1'b0);
-	always #(CLK2_PERIOD/2) clock2 <= (clock2 === 1'b0);
-	always #(XTAL_PERIOD/2) xtal_clk <= (xtal_clk === 1'b0);
-
-	initial begin
-		test_step = 0;
-		clock = 0;
-		clock2 = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
+initial begin
+   test_step = 0;
+end
 
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
-	   	$dumpvars(1, user_basic_tb);
-	   	$dumpvars(1, user_basic_tb.u_top);
-	   	//$dumpvars(0, user_basic_tb.u_top.u_pll);
-	   	$dumpvars(0, user_basic_tb.u_top.u_wb_host);
-	   	//$dumpvars(0, user_basic_tb.u_top.u_intercon);
-	   	//$dumpvars(1, user_basic_tb.u_top.u_intercon);
-	   	$dumpvars(0, user_basic_tb.u_top.u_pinmux);
+	   	$dumpvars(0, `TB_TOP);
+	   	$dumpvars(1, `TB_TOP.u_top);
+	   	$dumpvars(0, `TB_TOP.u_top.u_pll);
+	   	$dumpvars(0, `TB_TOP.u_top.u_wb_host);
+	   	//$dumpvars(0, `TB_TOP.u_top.u_intercon);
+	   	//$dumpvars(1, `TB_TOP.u_top.u_intercon);
+	   	$dumpvars(0, `TB_TOP.u_top.u_pinmux);
 	   end
        `endif
 
-	initial begin
-		wb_rst_i <= 1'b0;
-		#1000;
-		wb_rst_i <= 1'b1;
-		#1000;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-
-
 initial
 begin
 
+   init();
+
    #200; // Wait for reset removal
    repeat (10) @(posedge clock);
    $display("Monitor: Standalone User Basic Test Started");
@@ -260,7 +214,6 @@
    repeat (2) @(posedge clock);
 
    test_fail=0;
-
    fork
    begin
        $display("##########################################################");
@@ -359,14 +312,15 @@
        end else begin
           $display("STATUS: Step-4, Checking the soft reboot sequence - PASSED");
        end
+
        $display("##########################################################");
-       /****
        $display("Step-5, Checking the uart Master baud-16x clock is 9600* 16");
        test_id = 5;
 
        apply_strap(16'h10); // [4] -  // uart master config control - constant value based on system clock selection
 
-       uartm_clock_monitor(6510); // 1/(9600*16) = 6510 ns
+       repeat (10) @(posedge clock);
+       uartm_clock_monitor(6510); // 1/(9600*16) = 6510 ns, Assumption is user_clock1 = 40Mhz
 
        if(test_fail == 1) begin
           $display("ERROR: Step-5,  Checking the uart Master baud-16x clock - FAILED");
@@ -374,53 +328,68 @@
           $display("STATUS: Step-5,  Checking the uart Master baud-16x clock - PASSED");
        end
        $display("##########################################################");
-       ***/
-       /*** 
+
+
+        
        `ifndef GL  
        $display("###################################################");
        $display("Step-5,Monitor: Checking the PLL:");
        $display("###################################################");
        test_id = 5;
        // Set PLL enable, no DCO mode ; Set PLL output divider to 0x03
-       wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b100,4'b0000,8'h2});
-       wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b0,5'h3,26'h00000});
-       repeat (100) @(posedge clock);
-       pll_clock_monitor(5.101);
-
+       // Checking the expression
+       //   Internal PLL delay = 1.168 + 0.012 * $itor(bcount)
+       //   Actual PLL Clock Period = delay * 4
+            
+       wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_PLL_CTRL1,{24'h0,1'b1,3'b000});
+       bcount =0; 
+       for(i = 0; i < 26; i = i+1) begin
+           wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_PLL_CTRL2,{1'b1,5'h0,bcount[25:0]});
+           repeat (10) @(posedge clock);
+           pll_clock_monitor((1.168 + (0.012 *i)) * 4);
+           //$display("i: %d bcount: %x Clk Period : %f",i,bcount,(1.168 + (0.012 *i)) * 4);
+           bcount = bcount | (1 << i ); 
+        end
+       /***
        test_step = 12;
-       // Set PLL enable, DCO mode ; Set PLL output divider to 0x01
-       wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b000,4'b0000,8'h2});
-       wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b1,5'h0,26'h0000});
-       repeat (100) @(posedge clock);
-       pll_clock_monitor(4.080);
-
+       // Set PLL enable, DCO mode ; Set PLL output divider to 0x05
+       // Input Ref Clock Divider - 0 , Means Div-2, So Osc clock = 40Mhz/2 = 20Mhz = 50ns
+       // Since PLL has divider by 4, Efectivly PLL Output Fequency = 20Mhz * 5 = 100Mhz
+       wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b010,4'b0000,8'h3});
+       wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b0,5'd10,26'h0000});
+       repeat (10000) @(posedge clock);
+       pll_clock_monitor(5);
+       */
        if(test_fail == 1) begin
           $display("ERROR: Step-5, Checking the PLL - FAILED");
        end else begin
           $display("STATUS: Step-5, Checking the PLL - PASSED");
        end
        $display("##########################################################");
-
+       
+       
        $display("###################################################");
        $display("Step-6,Monitor: PLL Monitor Clock output:");
        $display("###################################################");
        $display("Monitor: CPU: CLOCK2/(2+3), USB: CLOCK2/(2+9), RTC: CLOCK2/(2+255), WBS:CLOCK2/(2+4)");
        test_id = 6;
        test_step = 13;
-       wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h63,8'h69,8'hFF,8'h64});
+       init();
+       repeat (10) @(posedge clock);
+       // Configured the PLL to highest frequency, 5.008ns
+       //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_PLL_CTRL1,{24'h0,1'b1,3'b000});
+       //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_PLL_CTRL2,{1'b1,5'h0,26'h0});
 
-       // Set PLL enable, DCO mode ; Set PLL output divider to 0x01
-       wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b000,4'b0000,8'h2});
-       wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b1,5'h0,26'h0000});
-       dbg_clk_monitor(79,60,5*CLK2_PERIOD,11*CLK2_PERIOD,257*CLK2_PERIOD,6*CLK2_PERIOD);
-       `endif
+       // Monitor user_clock1 at debug Mon
+       dbg_clk_monitor();
           
        if(test_fail == 1) begin
           $display("ERROR: Step-6, PLL Monitor Clock output - FAILED");
        end else begin
           $display("STATUS: Step-6, PLL Monitor Clock output - PASSED");
        end
-      ****/
+      
+       `endif
        $display("##########################################################");
         $display("Step-7,Monitor: Checking the chip signature :");
         $display("###################################################");
@@ -430,8 +399,8 @@
         wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
          wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_0,read_data,32'h8273_8343);
-         wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_1,read_data,32'h0309_2022);
-         wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_2,read_data,32'h0005_3000);
+         wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_1,read_data,32'h0709_2022);
+         wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_2,read_data,32'h0005_4000);
          if(test_fail == 1) begin
             $display("ERROR: Step-7,Monitor: Checking the chip signature - FAILED");
          end else begin
@@ -453,15 +422,15 @@
       $display("###################################################");
       if(test_fail == 0) begin
          `ifdef GL
-             $display("Monitor: Standalone User UART Test (GL) Passed");
+             $display("Monitor: %m (GL) Passed");
          `else
-             $display("Monitor: Standalone User UART Test (RTL) Passed");
+             $display("Monitor: %m (RTL) Passed");
          `endif
       end else begin
           `ifdef GL
-              $display("Monitor: Standalone User UART Test (GL) Failed");
+              $display("Monitor: %m (GL) Failed");
           `else
-              $display("Monitor: Standalone User UART Test (RTL) Failed");
+              $display("Monitor: %m (RTL) Failed");
           `endif
        end
       $display("###################################################");
@@ -470,53 +439,6 @@
 end
 
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (clock2),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in )  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
-
-
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-
-    end
-`endif    
 
 task clock_monitor2;
 input [3:0] cpu_cfg;
@@ -601,7 +523,8 @@
    `ifdef GL
       force clock_mon = u_top.u_wb_host.pll_clk_out[0];
     `else
-      force clock_mon = u_top.u_wb_host.u_clkbuf_pll.X;
+      force clock_mon = u_top.u_wb_host.int_pll_clock;
+
     `endif
    check_clock_period("PLL CLock",exp_period);
    release clock_mon;
@@ -618,35 +541,38 @@
 endtask
 
 
-wire dbg_clk_mon = io_out[33];
+wire dbg_clk_mon = io_out[37];
+
+//assign dbg_clk_ref  =    (cfg_mon_sel == 4'b000) ? user_clock1    :
+//	                       (cfg_mon_sel == 4'b001) ? user_clock2    :
+//	                       (cfg_mon_sel == 4'b010) ? xtal_clk     :
+//	                       (cfg_mon_sel == 4'b011) ? int_pll_clock: 
+//	                       (cfg_mon_sel == 4'b100) ? mclk         : 
+//	                       (cfg_mon_sel == 4'b101) ? cpu_clk      : 
+//	                       (cfg_mon_sel == 4'b110) ? usb_clk      : 
+//	                       (cfg_mon_sel == 4'b111) ? rtc_clk      : 1'b0;
 
 task dbg_clk_monitor;
-input [15:0] exp_pll_div16_period;
-input [15:0] exp_pll_ref_period;
-input [15:0] exp_cpu_period;
-input [15:0] exp_usb_period;
-input [15:0] exp_rtc_period;
-input [15:0] exp_wbs_period;
 begin
    force clock_mon = dbg_clk_mon;
 
-   wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b100,4'b0000,8'h2});
-   check_clock_period("PLL CLock",exp_pll_div16_period);
+   wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG1,{16'h0,4'b0000,4'b0000});
+   check_clock_period("USER CLOCK1",CLK1_PERIOD*16);
 
-   wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b100,4'b0001,8'h2});
-   check_clock_period("PLL REF Clock",exp_pll_ref_period);
+   wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG1,{16'h0,4'b0001,4'b0000});
+   check_clock_period("USER CLOCK2",CLK2_PERIOD*16);
 
-   wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b100,4'b0010,8'h2});
-   check_clock_period("WBS Clock",exp_wbs_period);
+   wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG1,{16'h0,4'b0010,4'b0000});
+   check_clock_period("XTAL CLOCK2",XTAL_PERIOD*16);
 
-   wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b100,4'b0011,8'h2});
-   check_clock_period("CPU CLock",exp_cpu_period);
+   wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG1,{16'h0,4'b0011,4'b0000});
+   check_clock_period("INTERNAL PLL",IPLL_PERIOD*16);
+   
+   wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG1,{16'h0,4'b0100,4'b0000});
+   check_clock_period("WBS CLOCK",CLK1_PERIOD*16);
 
-   wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b100,4'b0100,8'h2});
-   check_clock_period("RTC Clock",exp_rtc_period);
-
-   wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b100,4'b0101,8'h2});
-   check_clock_period("USB Clock",exp_usb_period);
+   wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG1,{16'h0,4'b0101,4'b0000});
+   check_clock_period("CPU CLOCK",CLK1_PERIOD*16);
    release clock_mon;
 end
 endtask
@@ -670,15 +596,15 @@
    repeat(1) @(posedge clock_mon);
    repeat(1) @(posedge clock_mon);
    edge1  = $realtime;
-   repeat(100) @(posedge clock_mon);
+   repeat(10) @(posedge clock_mon);
    edge2  = $realtime;
-   clock_period = (edge2-edge1)/100;
+   clock_period = (edge2-edge1)/10;
 
    if ( clock_period > max_period ) begin
-       $display("STATUS: FAIL => %s clock is too fast => Exp: %.3fns Rxd: %.3fns",clk_name,clock_period,max_period);
+       $display("STATUS: FAIL => %s clock is too fast => Rxp: %.3fns Exd: %.3fns",clk_name,clock_period,max_period);
        test_fail = 1;
    end else if ( clock_period < min_period ) begin
-       $display("STATUS: FAIL => %s clock is too slow => Exp: %.3fns Rxd: %.3fns",clk_name,clock_period,min_period);
+       $display("STATUS: FAIL => %s clock is too slow => Rxp: %.3fns Exd: %.3fns",clk_name,clock_period,min_period);
        test_fail = 1;
    end else begin
        $display("STATUS: PASS => %s  Period: %.3fns ",clk_name,period);
@@ -689,137 +615,5 @@
 
 
 
-
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/user_cache_bypass/Makefile b/verilog/dv/user_cache_bypass/Makefile
index 7ecacbf..ec06c1f 100644
--- a/verilog/dv/user_cache_bypass/Makefile
+++ b/verilog/dv/user_cache_bypass/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -51,32 +51,32 @@
 vvp:  ${PATTERN:=.vvp}
 
 %.vvp: %_tb.v
-	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_cache_bypass.c -o user_cache_bypass.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH) ${PATTERN}.c -o ${PATTERN}.o
 	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
-	${GCC_PREFIX}-gcc -o user_cache_bypass.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_cache_bypass.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
-	${GCC_PREFIX}-objcopy -O verilog user_cache_bypass.elf user_cache_bypass.hex
-	${GCC_PREFIX}-objdump -D user_cache_bypass.elf > user_cache_bypass.dump
-	rm crt.o user_cache_bypass.o
+	${GCC_PREFIX}-gcc -o ${PATTERN}.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld ${PATTERN}.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+	${GCC_PREFIX}-objcopy -O verilog ${PATTERN}.elf ${PATTERN}.hex
+	${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
+	rm crt.o ${PATTERN}.o
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/user_cache_bypass/user_cache_bypass.c b/verilog/dv/user_cache_bypass/user_cache_bypass.c
index a3e9b0d..bd8ee6a 100644
--- a/verilog/dv/user_cache_bypass/user_cache_bypass.c
+++ b/verilog/dv/user_cache_bypass/user_cache_bypass.c
@@ -16,21 +16,9 @@
 // SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
 // //////////////////////////////////////////////////////////////////////////
 #define SC_SIM_OUTPORT (0xf0000000)
-#define uint32_t  long
-#define uint16_t  int
-
-#define reg_mprj_globl_reg0  (*(volatile uint32_t*)0x10020000) // Chip ID
-#define reg_mprj_globl_reg1  (*(volatile uint32_t*)0x10020004) // Global Config-0
-#define reg_mprj_globl_reg2  (*(volatile uint32_t*)0x10020008) // Global Config-1
-#define reg_mprj_globl_reg3  (*(volatile uint32_t*)0x1002000C) // Global Interrupt Mask
-#define reg_mprj_globl_reg4  (*(volatile uint32_t*)0x10020010) // Global Interrupt
-#define reg_mprj_globl_reg5  (*(volatile uint32_t*)0x10020014) // Multi functional sel
-#define reg_mprj_globl_soft0  (*(volatile uint32_t*)0x10020018) // Sof Register-0
-#define reg_mprj_globl_soft1  (*(volatile uint32_t*)0x1002001C) // Sof Register-1
-#define reg_mprj_globl_soft2  (*(volatile uint32_t*)0x10020020) // Sof Register-2
-#define reg_mprj_globl_soft3  (*(volatile uint32_t*)0x10020024) // Sof Register-3
-#define reg_mprj_globl_soft4 (*(volatile uint32_t*)0x10020028) // Sof Register-4
-#define reg_mprj_globl_soft5 (*(volatile uint32_t*)0x1002002C) // Sof Register-5
+#include "int_reg_map.h"
+#include "common_misc.h"
+#include "common_bthread.h"
 
 
 // -------------------------------------------------------------------------
@@ -39,8 +27,8 @@
 
 void test_function()
 {
-    reg_mprj_globl_soft2  = 0x33445566;  // Sig-2
-    reg_mprj_globl_soft3  = 0x44556677;  // Sig-3
+    reg_glbl_soft_reg_2  = 0x33445566;  // Sig-2
+    reg_glbl_soft_reg_3  = 0x44556677;  // Sig-3
 
     return;
 }
@@ -51,23 +39,37 @@
     uint16_t *src_ptr;
     uint16_t *dst_ptr;
 
+    // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+    // bit[7:0]   - core-0
+    // bit[15:8]  - core-1
+    // bit[23:16] - core-2
+    // bit[31:24] - core-3
+
+    reg_glbl_mail_box = 0x1 << (bthread_get_core_id() * 8); // Start of Main 
 
     src_ptr = &test_function;
     dst_ptr = func;
 
-    reg_mprj_globl_soft0  = 0x11223344;  // Sig-0
+    reg_glbl_soft_reg_0  = 0x11223344;  // Sig-0
     while (src_ptr < &main) {
 	*(dst_ptr++) = *(src_ptr++);
     }
 
     // Call the routine in SRAM
-    reg_mprj_globl_soft1  = 0x22334455;  // Sig-1
+    reg_glbl_soft_reg_1  = 0x22334455;  // Sig-1
     
     ((void(*)())func)();
 
-    reg_mprj_globl_soft4 = 0x55667788; 
-    reg_mprj_globl_soft5 = 0x66778899; 
+    reg_glbl_soft_reg_4 = 0x55667788; 
+    reg_glbl_soft_reg_5 = 0x66778899; 
 
     // Signal end of test
+    // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+    // bit[7:0]   - core-0
+    // bit[15:8]  - core-1
+    // bit[23:16] - core-2
+    // bit[31:24] - core-3
+
+    reg_glbl_mail_box = 0xff << (bthread_get_core_id() * 8); // Start of Main 
 }
 
diff --git a/verilog/dv/user_cache_bypass/user_cache_bypass_tb.v b/verilog/dv/user_cache_bypass/user_cache_bypass_tb.v
index 28c8f2c..b8909fa 100644
--- a/verilog/dv/user_cache_bypass/user_cache_bypass_tb.v
+++ b/verilog/dv/user_cache_bypass/user_cache_bypass_tb.v
@@ -67,51 +67,15 @@
 
 `include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
 module user_cache_bypass_tb;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 25;
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
-
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
-	integer    d_risc_id;
+`include "user_tasks.sv"
 
 
-
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
+reg  [15:0]    strap_in;
 
 	`ifdef WFDUMP
 	   initial begin
@@ -125,46 +89,35 @@
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
 
-		#200; // Wait for reset removal
-	        repeat (10) @(posedge clock);
+        strap_in = PAD_STRAP;
+        strap_in[`PSTRAP_RISCV_CACHE_BYPASS] = 1'b1;
+        // Aplly the Strap
+        apply_strap(strap_in);
+
+        // Cross-check if the icache/dcache bypass flag is set
+        wait(u_top.u_riscv_top.cfg_bypass_icache == 1'b1);
+        wait(u_top.u_riscv_top.cfg_bypass_dcache == 1'b1);
+
+	    repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
-		// Remove Wb Reset
-		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+        // wait for risc execution started 
+        wait_riscv_boot();
+		$display("Monitor: RISCV execution started");
 
-	        repeat (2) @(posedge clock);
-		#1;
-		// Set the icahce and dcache bypass
-                wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG1,{4'b0,2'b11,2'b00,8'b0,16'b0});
-
-		// Remove all the reset
-		if(d_risc_id == 0) begin
-		     $display("STATUS: Working with Risc core 0");
-                     wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
-		end else begin
-		     $display("STATUS: Working with Risc core 1");
-                     wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
-		end
-
-
-		// Repeat cycles of 1000 clock edges as needed to complete testbench
-		repeat (30) begin
-			repeat (1000) @(posedge clock);
-			// $display("+1000 cycles");
-		end
-
-
-		$display("Monitor: Reading Back the expected value");
+        // wait for risc execution Completed 
+        wait_riscv_exit();
+		$display("Monitor: RISCV execution completed");
 		// User RISC core expect to write these value in global
 		// register, read back and decide on pass fail
 		// 0x30000018  = 0x11223344; 
-                // 0x3000001C  = 0x22334455; 
-                // 0x30000020  = 0x33445566; 
-                // 0x30000024  = 0x44556677; 
-                // 0x30000028 = 0x55667788; 
-                // 0x3000002C = 0x66778899; 
+        // 0x3000001C  = 0x22334455; 
+        // 0x30000020  = 0x33445566; 
+        // 0x30000024  = 0x44556677; 
+        // 0x30000028 = 0x55667788; 
+        // 0x3000002C = 0x66778899; 
 
-                test_fail = 0;
+        test_fail = 0;
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_0,read_data,32'h11223344);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_1,read_data,32'h22334455);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_2,read_data,32'h33445566);
@@ -177,95 +130,47 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK 
+assign io_in[5]  = 1'b1; // RESET
+assign io_in[21] = 1'b0 ; // SPIS SCK 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
 //  user core using the gpio pads
 //  ----------------------------------------------------
 
-   wire flash_clk = io_out[24];
-   wire flash_csb = io_out[25];
+   wire flash_clk = io_out[28];
+   wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[29];
-   wire #1 io_oeb_30 = io_oeb[30];
-   wire #1 io_oeb_31 = io_oeb[31];
-   wire #1 io_oeb_32 = io_oeb[32];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+   wire #1 io_oeb_29 = io_oeb[33];
+   wire #1 io_oeb_30 = io_oeb[34];
+   wire #1 io_oeb_31 = io_oeb[35];
+   wire #1 io_oeb_32 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
 
-   assign io_in[29] = flash_io0;
-   assign io_in[30] = flash_io1;
-   assign io_in[31] = flash_io2;
-   assign io_in[32] = flash_io3;
+   assign io_in[33] = flash_io0;
+   assign io_in[34] = flash_io1;
+   assign io_in[35] = flash_io2;
+   assign io_in[36] = flash_io3;
 
    // Quard flash
      s25fl256s #(.mem_file_name("user_cache_bypass.hex"),
@@ -286,136 +191,6 @@
 
 
 
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/user_gpio/Makefile b/verilog/dv/user_gpio/Makefile
index 28bcc52..d53c0a4 100644
--- a/verilog/dv/user_gpio/Makefile
+++ b/verilog/dv/user_gpio/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_gpio/user_gpio_tb.v b/verilog/dv/user_gpio/user_gpio_tb.v
index a0ab607..0efe8fe 100644
--- a/verilog/dv/user_gpio/user_gpio_tb.v
+++ b/verilog/dv/user_gpio/user_gpio_tb.v
@@ -74,46 +74,19 @@
 `define TB_GLBL user_gpio_tb
 
 module user_gpio_tb;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
-
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
+`include "user_tasks.sv"
 
 
-	reg [1:0] spi_chip_no;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg        test_fail;
-	reg [31:0] read_data;
     reg        test_start;
     integer    test_step;
     wire       clock_mon;
 
-	integer    d_risc_id;
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
 
 
      /************* Port-A Mapping **********************************
@@ -241,15 +214,6 @@
 
 	wire [31:0] irq_lines = u_top.u_pinmux.u_glbl_reg.irq_lines;
 
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
 
 	`ifdef WFDUMP
 	   initial begin
@@ -368,67 +332,21 @@
 
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: GPIO Mode (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: GPIO Mode (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: GPIO Mode (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: GPIO Mode (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	        $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
-
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
-
 
 //----------------------------------------------------
 //  Task
@@ -625,137 +543,6 @@
 end
 endtask
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("STATUS: WB USER ACCESS WRITE Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
 
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  //$display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     `TB_GLBL.test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_spi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_spi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_spi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_spi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_spi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_spi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_spi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb.reg_wr;
-wire [7:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-
-`include "user_tasks.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/user_i2cm/Makefile b/verilog/dv/user_i2cm/Makefile
index b2bfe32..57d15a4 100644
--- a/verilog/dv/user_i2cm/Makefile
+++ b/verilog/dv/user_i2cm/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_i2cm/user_i2cm_tb.v b/verilog/dv/user_i2cm/user_i2cm_tb.v
index a343366..0547990 100644
--- a/verilog/dv/user_i2cm/user_i2cm_tb.v
+++ b/verilog/dv/user_i2cm/user_i2cm_tb.v
@@ -69,53 +69,20 @@
 `include "i2c_slave_model.v"
 
 module tb_top;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-reg            clock         ;
-reg            wb_rst_i      ;
-reg            power1, power2;
-reg            power3, power4;
+`include "user_tasks.sv"
 
-reg            wbd_ext_cyc_i;  // strobe/request
-reg            wbd_ext_stb_i;  // strobe/request
-reg [31:0]     wbd_ext_adr_i;  // address
-reg            wbd_ext_we_i;  // write
-reg [31:0]     wbd_ext_dat_i;  // data output
-reg [3:0]      wbd_ext_sel_i;  // byte enable
 
-wire [31:0]    wbd_ext_dat_o;  // data input
-wire           wbd_ext_ack_o;  // acknowlegement
-wire           wbd_ext_err_o;  // error
-
-// User I/O
-wire [37:0]    io_oeb        ;
-wire [37:0]    io_out        ;
-wire [37:0]    io_in         ;
-
-wire [37:0]    mprj_io       ;
-wire [7:0]     mprj_io_0     ;
-reg            test_fail     ;
-reg [31:0]     read_data     ;
 //----------------------------------
 // Uart Configuration
 // ---------------------------------
 
 integer i,j;
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
 
 	`ifdef WFDUMP
 	   initial begin
@@ -127,7 +94,7 @@
 initial
 begin
    test_fail = 0;
-           init();
+   init();
     
    #200; // Wait for reset removal
    repeat (10) @(posedge clock);
@@ -278,15 +245,15 @@
      $display("###################################################");
      if(test_fail == 0) begin
         `ifdef GL
-            $display("Monitor: Standalone User I2M Test (GL) Passed");
+            $display("Monitor: %m (GL) Passed");
         `else
-            $display("Monitor: Standalone User I2M Test (RTL) Passed");
+            $display("Monitor: %m (RTL) Passed");
         `endif
      end else begin
          `ifdef GL
-             $display("Monitor: Standalone User I2M Test (GL) Failed");
+             $display("Monitor: %m (GL) Failed");
          `else
-             $display("Monitor: Standalone User I2M Test (RTL) Failed");
+             $display("Monitor: %m (RTL) Failed");
          `endif
       end
      $display("###################################################");
@@ -294,54 +261,9 @@
      $finish;
 end
 
-
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
+assign io_in[5]  = 1'b1; // RESET
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 //---------------------------
 // I2C
@@ -363,134 +285,6 @@
        );
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("STATUS: WB USER ACCESS WRITE Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
 
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  //$display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_cmp;
-input [31:0] address;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/user_mcore_test1/Makefile b/verilog/dv/user_mcore_test1/Makefile
index 376195f..f995178 100644
--- a/verilog/dv/user_mcore_test1/Makefile
+++ b/verilog/dv/user_mcore_test1/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_mcore_test1/user_mcore_test1.c b/verilog/dv/user_mcore_test1/user_mcore_test1.c
index a74159f..45136a5 100644
--- a/verilog/dv/user_mcore_test1/user_mcore_test1.c
+++ b/verilog/dv/user_mcore_test1/user_mcore_test1.c
@@ -16,7 +16,7 @@
  */
 
 
-#include "../c_func/inc/int_reg_map.h"
+#include "int_reg_map.h"
 #include "common_misc.h"
 #include "common_bthread.h"
 
@@ -29,23 +29,23 @@
 // Multi-core test, Two Array is filled with below data, destination hold sum
 //      source           result            remark
 //   src0    src1        dest              
-//   0x0000    0x00000000      0x00000000            updated by core-0
-//   0x1111    0x11110000      0x11111111            updated by core-0
-//   0x2222    0x22220000      0x22222222            updated by core-0
-//   0x3333    0x33330000      0x33333333            updated by core-0
-//   0x4444    0x44440000      0x44444444            updated by core-1
-//   0x5555    0x55550000      0x55555555            updated by core-1
-//   0x6666    0x66660000      0x66666666            updated by core-1
-//   0x7777    0x77770000      0x77777777            updated by core-1
-//                                   
-//   0x8888    0x88880000      0x88888888            updated by core-2
-//   0x9999    0x99990000      0x99999999            updated by core-2
-//   0xAAAA    0xAAAA0000      0xAAAAAAAA            updated by core-2
-//   0xBBBB    0xBBBB0000      0xBBBBBBBB            updated by core-2
-//   0xCCCC    0xCCCC0000      0xCCCCCCCC            updated by core-3
-//   0xDDDD    0xDDDD0000      0xDDDDDDDD            updated by core-3
-//   0xEEEE    0xEEEE0000      0xEEEEEEEE            updated by core-3
-//   0xFFFF    0xFFFF0000      0xFFFFFFFF            updated by core-3
+//   0x00    0x0000      0x0000            updated by core-0
+//   0x11    0x1100      0x1111            updated by core-0
+//   0x22    0x2200      0x2222            updated by core-0
+//   0x33    0x3300      0x3333            updated by core-0
+//   0x44    0x4400      0x4444            updated by core-0
+//   0x55    0x5500      0x5555            updated by core-0
+//   0x66    0x6600      0x6666            updated by core-0
+//   0x77    0x7700      0x7777            updated by core-0
+//
+//   0x88    0x8800      0x8888            updated by core-1
+//   0x99    0x9900      0x9999            updated by core-1
+//   0xAA    0xAA00      0xAAAA            updated by core-1
+//   0xBB    0xBB00      0xBBBB            updated by core-1
+//   0xCC    0xCC00      0xCCCC            updated by core-1
+//   0xDD    0xDD00      0xDDDD            updated by core-1
+//   0xEE    0xEE00      0xEEEE            updated by core-1
+//   0xFF    0xFF00      0xFFFF            updated by core-1
 //
 // -------------------------------------------------------------------------
 
@@ -103,10 +103,8 @@
 
        // Create two argument structures that include the array pointers and
        // what elements each core should process.
-       arg_t arg0 = { dest, src0, src1, 0, buf_size/4 };
-       arg_t arg1 = { dest, src0, src1, buf_size/4, buf_size/2 };
-       arg_t arg2 = { dest, src0, src1, buf_size/2, (3*buf_size)/4 };
-       arg_t arg3 = { dest, src0, src1, (3*buf_size)/4, buf_size };
+       arg_t arg0 = { dest, src0, src1, 0, buf_size/2 };
+       arg_t arg1 = { dest, src0, src1, buf_size/2, buf_size };
 
        reg_glbl_soft_reg_0  = 0x11223344;  // Sig-0
        // Initialize bare threads (bthread).
@@ -120,8 +118,6 @@
 
        // Spawn work onto core 1
        bthread_spawn( 1, &vvadd_mt, &arg1 );
-       bthread_spawn( 2, &vvadd_mt, &arg2 );
-       bthread_spawn( 3, &vvadd_mt, &arg3 );
       
        reg_glbl_soft_reg_2  = 0x33445566;  // Sig-2
        // Have core 0 also do some work.
@@ -130,8 +126,6 @@
        reg_glbl_soft_reg_3  = 0x44556677;  // Sig-3
        // Wait for core 1 to finish.
        bthread_join(1);
-       bthread_join(2);
-       bthread_join(3);
 
 
        // Stop counting stats
diff --git a/verilog/dv/user_mcore_test1/user_mcore_test1_tb.v b/verilog/dv/user_mcore_test1/user_mcore_test1_tb.v
index 1c6b6a2..d272b22 100644
--- a/verilog/dv/user_mcore_test1/user_mcore_test1_tb.v
+++ b/verilog/dv/user_mcore_test1/user_mcore_test1_tb.v
@@ -70,51 +70,12 @@
 `define TB_TOP    user_mcore_test1_tb
 
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
-
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
-	integer    d_risc_id;
-
-
-
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
+`include "user_tasks.sv"
 
 	`ifdef WFDUMP
 	   initial begin
@@ -140,25 +101,25 @@
 	        repeat (2) @(posedge clock);
 		#1;
 		// Remove all the reset
-		$display("STATUS: Working with Both core Risc core 0/1/2/3 ");
-        wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'hF1F);
+		$display("STATUS: Working with Both core Risc core 0 & 1 ");
+        wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h31F);
 
 
-        wait_riscv_boot(0);
+        wait_riscv_boot();
 
-        wait_riscv_exit(0);
+        wait_riscv_exit();
 
 		$display("Monitor: Reading Back the expected value");
 		// User RISC core expect to write these value in global
 		// register, read back and decide on pass fail
 		// 0x30000018  = 0x11223344; 
-                // 0x3000001C  = 0x22334455; 
-                // 0x30000020  = 0x33445566; 
-                // 0x30000024  = 0x44556677; 
-                // 0x30000028 = 0x55667788; 
-                // 0x3000002C = 0x66778899; 
+        // 0x3000001C  = 0x22334455; 
+        // 0x30000020  = 0x33445566; 
+        // 0x30000024  = 0x44556677; 
+        // 0x30000028 = 0x55667788; 
+        // 0x3000002C = 0x66778899; 
 
-                test_fail = 0;
+        test_fail = 0;
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_0,read_data,32'h11223344);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_1,read_data,32'h22334455);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_2,read_data,32'h33445566);
@@ -168,72 +129,29 @@
 
 
 	   
-	    	$display("###################################################");
-          	if(test_fail == 0) begin
-		   `ifdef GL
-	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
+	    $display("###################################################");
+        if(test_fail == 0) begin
+		`ifdef GL
+	    	$display("Monitor: %m (GL) Passed");
+		`else
+		    $display("Monitor: %m (RTL) Passed");
+		`endif
+	    end else begin
+		  `ifdef GL
+	    	   $display("Monitor: %m (GL) Failed");
 		   `else
-		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
+		       $display("Monitor: %m (RTL) Failed");
 		   `endif
-	        end else begin
-		    `ifdef GL
-	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
-		    `else
-		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
-		    `endif
-		 end
-	    	$display("###################################################");
+		end
+	    $display("###################################################");
 	    $finish;
 	end
 
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 assign io_in[21] = 1'b0 ; // SPIS SCK 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
@@ -243,14 +161,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -277,136 +195,6 @@
 
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/user_mcore_test2/Makefile b/verilog/dv/user_mcore_test2/Makefile
index 8054ca6..2975493 100644
--- a/verilog/dv/user_mcore_test2/Makefile
+++ b/verilog/dv/user_mcore_test2/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_mcore_test2/user_mcore_test2.c b/verilog/dv/user_mcore_test2/user_mcore_test2.c
index b2a53c8..5628795 100644
--- a/verilog/dv/user_mcore_test2/user_mcore_test2.c
+++ b/verilog/dv/user_mcore_test2/user_mcore_test2.c
@@ -18,7 +18,7 @@
 
 #include "common_misc.h"
 #include "common_bthread.h"
-#include "../c_func/inc/int_reg_map.h"
+#include "int_reg_map.h"
 
 #define SC_SIM_OUTPORT (0xf0000000)
 #define uint32_t  long
@@ -74,6 +74,7 @@
        }
        // Core 0 thread
        if ( bthread_get_core_id() == 0 ) {
+         while((reg_glbl_mail_box >> (bthread_get_core_id() *8) & 0xFF) != 0x81); // wait for test start
          print_message("UART command-0 from core-0\n");
          print_message("UART command-1 from core-0\n");
          print_message("UART command-2 from core-0\n");
@@ -83,7 +84,7 @@
        // Core 1 thread
        if ( bthread_get_core_id() == 1 ) {
 
-         while((reg_glbl_mail_box & 0x1) == 0x0); // wait for test start
+         while((reg_glbl_mail_box >> (bthread_get_core_id() *8) & 0xFF) != 0x81); // wait for test start
          print_message("UART command-0 from core-1\n");
          print_message("UART command-1 from core-1\n");
          print_message("UART command-2 from core-1\n");
@@ -92,7 +93,7 @@
        }
        // Core 2 thread
        if ( bthread_get_core_id() == 2 ) {
-         while((reg_glbl_mail_box & 0x1) == 0x0); // wait for test start
+         while((reg_glbl_mail_box >> (bthread_get_core_id() *8) & 0xFF) != 0x81); // wait for test start
          print_message("UART command-0 from core-2\n");
          print_message("UART command-1 from core-2\n");
          print_message("UART command-2 from core-2\n");
@@ -101,7 +102,7 @@
        }
        // Core 3 thread
        if ( bthread_get_core_id() == 3 ) {
-         while((reg_glbl_mail_box & 0x1) == 0x0); // wait for test start
+         while((reg_glbl_mail_box >> (bthread_get_core_id() *8) & 0xFF) != 0x81); // wait for test start
          print_message("UART command-0 from core-3\n");
          print_message("UART command-1 from core-3\n");
          print_message("UART command-2 from core-3\n");
diff --git a/verilog/dv/user_mcore_test2/user_mcore_test2_tb.v b/verilog/dv/user_mcore_test2/user_mcore_test2_tb.v
index 6082305..c6f6181 100644
--- a/verilog/dv/user_mcore_test2/user_mcore_test2_tb.v
+++ b/verilog/dv/user_mcore_test2/user_mcore_test2_tb.v
@@ -71,34 +71,13 @@
 `define TB_TOP    user_mcore_test2_tb
 
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg        test_fail;
-	reg        test_start;
-	reg [31:0] read_data;
-        //----------------------------------
         // Uart Configuration
         // ---------------------------------
         reg [1:0]      uart_data_bit        ;
@@ -118,30 +97,12 @@
 	reg            flag                 ;
 
 	reg [31:0]     check_sum            ;
-        
-	integer    d_risc_id;
+    reg [7:0]      test_start           ;
 
          integer i,j;
-
-
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-
-	// 50Mhz CLock
-	always #10 clock <= (clock === 1'b0);
-
 	initial begin
-		clock         = 0;
         test_start    = 0;
 	    flag          = 0;
-        wbd_ext_cyc_i ='h0;  // strobe/request
-        wbd_ext_stb_i ='h0;  // strobe/request
-        wbd_ext_adr_i ='h0;  // address
-        wbd_ext_we_i  ='h0;  // write
-        wbd_ext_dat_i ='h0;  // data output
-        wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -212,15 +173,16 @@
 	        repeat (2) @(posedge clock);
 		#1;
 		// Remove all the reset
-		$display("STATUS: Working with Both core Risc core 0,1,2,3 ");
-        wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'hF1F);
+		$display("STATUS: Working with Both core Risc core 0 & 1 ");
+        wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h31F);
 
 
 	    tb_uart.debug_mode = 0; // disable debug display
         tb_uart.uart_init;
         tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity, uart_stick_parity, uart_timeout, uart_divisor);
 
-        wait_riscv_boot(0);
+        wait_riscv_boot();
+        set_tb_ready();
 
 
 	    flag  = 0;
@@ -252,76 +214,34 @@
              // Check 
              // if all the 4224 byte received
              // if no error 
-             if(uart_rx_nu != 432) test_fail = 1;
-             if(check_sum != 32'h89f0) test_fail = 1;
+             if(uart_rx_nu != 216) test_fail = 1;
+             if(check_sum != 32'h44f0) test_fail = 1;
              if(tb_uart.err_cnt != 0) test_fail = 1;
 
 	   
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: multi core test (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: multi core test (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: multi core test (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: multi core test (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
 
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 assign io_in[21] = 1'b0 ; // SPIS SCK 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
@@ -331,14 +251,14 @@
    wire flash_clk = io_out[28];
    wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[33];
-   wire #1 io_oeb_30 = io_oeb[34];
-   wire #1 io_oeb_31 = io_oeb[35];
-   wire #1 io_oeb_32 = io_oeb[36];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+   wire #1 io_oeb_33 = io_oeb[33];
+   wire #1 io_oeb_34 = io_oeb[34];
+   wire #1 io_oeb_35 = io_oeb[35];
+   wire #1 io_oeb_36 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_33== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_34== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_35== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_36== 1'b0) ? io_out[36] : 1'bz;
 
    assign io_in[33] = flash_io0;
    assign io_in[34] = flash_io1;
@@ -377,137 +297,6 @@
 	.rxd                 (uart_txd           )
 	);
 
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/user_pwm/Makefile b/verilog/dv/user_pwm/Makefile
index b15037f..0d09337 100644
--- a/verilog/dv/user_pwm/Makefile
+++ b/verilog/dv/user_pwm/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_pwm/user_pwm_tb.v b/verilog/dv/user_pwm/user_pwm_tb.v
index 32b5b69..8d7a20a 100644
--- a/verilog/dv/user_pwm/user_pwm_tb.v
+++ b/verilog/dv/user_pwm/user_pwm_tb.v
@@ -72,55 +72,22 @@
 
 
 module user_pwm_tb;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 25;
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
-
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
+`include "user_tasks.sv"
 
 
-	reg [1:0] spi_chip_no;
 
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg        test_fail;
-	reg [31:0] read_data;
 	reg [31:0] OneMsPeriod;
-        integer    test_step;
-        wire       clock_mon;
+    integer    test_step;
+    wire       clock_mon;
 
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
 	initial begin
 		OneMsPeriod = 1000;
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -176,23 +143,21 @@
 
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: PWM Mode (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: PWM Mode (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: PWM Mode (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: PWM Mode (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	        $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
 
 wire pwm0 = io_out[9];
 wire pwm1 = io_out[13];
@@ -262,49 +227,9 @@
 end
 endtask
 
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
+assign io_in[5]  = 1'b1; // RESET
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 
 
@@ -317,137 +242,5 @@
 end
 endtask
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("STATUS: WB USER ACCESS WRITE Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  //$display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     `TB_GLBL.test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-
-`include "user_tasks.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/user_qspi/Makefile b/verilog/dv/user_qspi/Makefile
index edf4cf1..6d60a89 100644
--- a/verilog/dv/user_qspi/Makefile
+++ b/verilog/dv/user_qspi/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_qspi/user_qspi_tb.v b/verilog/dv/user_qspi/user_qspi_tb.v
index e4785b1..9801bdd 100644
--- a/verilog/dv/user_qspi/user_qspi_tb.v
+++ b/verilog/dv/user_qspi/user_qspi_tb.v
@@ -83,32 +83,12 @@
 `include "is62wvs1288.v"
 
 module user_qspi_tb;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
-
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg        test_fail;
-	reg [31:0] read_data;
+`include "user_tasks.sv"
 
 /*************************************************************
 *  SPI FSM State Control
@@ -167,21 +147,6 @@
 parameter P_QUAD   = 2'b10;
 parameter P_QDDR   = 2'b11;
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
 
 	`ifdef WFDUMP
 	   initial begin
@@ -1146,59 +1111,21 @@
 
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: SPI Master Mode (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: SPI Master Mode (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: SPI Master Mode (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: SPI Master Mode (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	        $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
-
 // SSPI Slave I/F
 assign io_in[0]  = 1'b1; // RESET
 
@@ -1264,137 +1191,6 @@
     );
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("STATUS: WB USER ACCESS WRITE Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     user_qspi_tb.test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/user_risc_boot/Makefile b/verilog/dv/user_risc_boot/Makefile
index d83adcc..c070ca5 100644
--- a/verilog/dv/user_risc_boot/Makefile
+++ b/verilog/dv/user_risc_boot/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_risc_boot/user_risc_boot.c b/verilog/dv/user_risc_boot/user_risc_boot.c
index 923dba7..0fb79f9 100644
--- a/verilog/dv/user_risc_boot/user_risc_boot.c
+++ b/verilog/dv/user_risc_boot/user_risc_boot.c
@@ -16,7 +16,7 @@
 // SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
 // //////////////////////////////////////////////////////////////////////////
 #define SC_SIM_OUTPORT (0xf0000000)
-#include "../c_func/inc/int_reg_map.h"
+#include "int_reg_map.h"
 #include "common_misc.h"
 #include "common_bthread.h"
 
diff --git a/verilog/dv/user_risc_boot/user_risc_boot_tb.v b/verilog/dv/user_risc_boot/user_risc_boot_tb.v
index 62a6c21..0901b82 100644
--- a/verilog/dv/user_risc_boot/user_risc_boot_tb.v
+++ b/verilog/dv/user_risc_boot/user_risc_boot_tb.v
@@ -79,52 +79,16 @@
 `define TB_HEX "user_risc_boot.hex"
 `define TB_TOP  user_risc_boot_tb
 module `TB_TOP;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+parameter real CLK1_PERIOD  = 20; // %0Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
-	integer    d_risc_id;
+`include "user_tasks.sv"
 
 
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
-
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
@@ -155,19 +119,19 @@
                      wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
 		end
 
-        wait_riscv_boot(d_risc_id);
+        wait_riscv_boot();
 
 		$display("Monitor: Reading Back the expected value");
 		// User RISC core expect to write these value in global
 		// register, read back and decide on pass fail
 		// 0x30000018  = 0x11223344; 
-                // 0x3000001C  = 0x22334455; 
-                // 0x30000020  = 0x33445566; 
-                // 0x30000024  = 0x44556677; 
-                // 0x30000028 = 0x55667788; 
-                // 0x3000002C = 0x66778899; 
+        // 0x3000001C  = 0x22334455; 
+        // 0x30000020  = 0x33445566; 
+        // 0x30000024  = 0x44556677; 
+        // 0x30000028 = 0x55667788; 
+        // 0x3000002C = 0x66778899; 
 
-                test_fail = 0;
+        test_fail = 0;
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_0,read_data,32'h11223344);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_1,read_data,32'h22334455);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_2,read_data,32'h33445566);
@@ -180,70 +144,26 @@
 	    	$display("###################################################");
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
+	    	   $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
+	    	    $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	    $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
-
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 assign io_in[21] = 1'b0; // CLOCK
 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
@@ -288,137 +208,6 @@
 
 
 
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/user_sema/user_sema_tb.v b/verilog/dv/user_sema/user_sema_tb.v
index a4e08a2..fa2b8a8 100644
--- a/verilog/dv/user_sema/user_sema_tb.v
+++ b/verilog/dv/user_sema/user_sema_tb.v
@@ -70,35 +70,14 @@
 `define TOP  user_sema_tb
 
 module `TOP;
-parameter CLK1_PERIOD = 10;
-parameter CLK2_PERIOD = 2;
+parameter real CLK1_PERIOD  = 25;
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-reg            clock         ;
-reg            clock2        ;
-reg            wb_rst_i      ;
-reg            power1, power2;
-reg            power3, power4;
+`include "user_tasks.sv"
 
-reg            wbd_ext_cyc_i;  // strobe/request
-reg            wbd_ext_stb_i;  // strobe/request
-reg [31:0]     wbd_ext_adr_i;  // address
-reg            wbd_ext_we_i;  // write
-reg [31:0]     wbd_ext_dat_i;  // data output
-reg [3:0]      wbd_ext_sel_i;  // byte enable
 
-wire [31:0]    wbd_ext_dat_o;  // data input
-wire           wbd_ext_ack_o;  // acknowlegement
-wire           wbd_ext_err_o;  // error
-
-// User I/O
-wire [37:0]    io_oeb        ;
-wire [37:0]    io_out        ;
-wire [37:0]    io_in         ;
-
-wire [37:0]    mprj_io       ;
-wire [7:0]     mprj_io_0     ;
-reg            test_fail     ;
-reg [31:0]     read_data     ;
 reg [31:0]     exp_data     ;
 //----------------------------------
 // Uart Configuration
@@ -107,23 +86,9 @@
 
 integer i,j;
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #(CLK1_PERIOD/2) clock  <= (clock === 1'b0);
-	always #(CLK2_PERIOD/2) clock2 <= (clock2 === 1'b0);
 
 	initial begin
 		test_step = 0;
-		clock = 0;
-		clock2 = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -139,16 +104,11 @@
 	   end
        `endif
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-
 
 initial
 begin
 
+   init();
    #200; // Wait for reset removal
    repeat (10) @(posedge clock);
    $display("Monitor: Standalone User Basic Test Started");
@@ -158,8 +118,6 @@
    test_fail=0;
    fork
       begin
-         // Remove Wb/PinMux Reset
-         wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
          // Setting Lock Bit Individually and clearing it imediatly
          for(i=0; i < 15; i = i+1) begin
@@ -214,15 +172,15 @@
       $display("###################################################");
       if(test_fail == 0) begin
          `ifdef GL
-             $display("Monitor: Semaphore Test (GL) Passed");
+             $display("Monitor: %m (GL) Passed");
          `else
-             $display("Monitor: Semaphore Test (RTL) Passed");
+             $display("Monitor: %m (RTL) Passed");
          `endif
       end else begin
           `ifdef GL
-              $display("Monitor: Semaphore Test (GL) Failed");
+              $display("Monitor: %m (GL) Failed");
           `else
-              $display("Monitor: Semaphore Test (RTL) Failed");
+              $display("Monitor: %m (RTL) Failed");
           `endif
        end
       $display("###################################################");
@@ -231,189 +189,9 @@
 end
 
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (clock2),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK 
+assign io_in[5]  = 1'b1; // RESET
+assign io_in[21] = 1'b0 ; // SPIS SCK 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-
-    end
-`endif    
-
-
-
-
-
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/user_spi_isp/Makefile b/verilog/dv/user_spi_isp/Makefile
index f655404..b4b9118 100644
--- a/verilog/dv/user_spi_isp/Makefile
+++ b/verilog/dv/user_spi_isp/Makefile
@@ -27,7 +27,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_spi_isp/user_spi_isp_tb.v b/verilog/dv/user_spi_isp/user_spi_isp_tb.v
index 7d78ef2..bc6a80c 100644
--- a/verilog/dv/user_spi_isp/user_spi_isp_tb.v
+++ b/verilog/dv/user_spi_isp/user_spi_isp_tb.v
@@ -70,33 +70,15 @@
 
 module user_spi_isp_tb;
 
-reg            clock         ;
-reg            wb_rst_i      ;
-reg            power1, power2;
-reg            power3, power4;
+parameter real CLK1_PERIOD  = 25;
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-reg            wbd_ext_cyc_i;  // strobe/request
-reg            wbd_ext_stb_i;  // strobe/request
-reg [31:0]     wbd_ext_adr_i;  // address
-reg            wbd_ext_we_i;  // write
-reg [31:0]     wbd_ext_dat_i;  // data output
-reg [3:0]      wbd_ext_sel_i;  // byte enable
+`include "user_tasks.sv"
 
-wire [31:0]    wbd_ext_dat_o;  // data input
-wire           wbd_ext_ack_o;  // acknowlegement
-wire           wbd_ext_err_o;  // error
 
-// User I/O
-wire [37:0]    io_oeb        ;
-wire [37:0]    io_out        ;
-wire [37:0]    io_in         ;
 
-wire [37:0]    mprj_io       ;
-wire [7:0]     mprj_io_0     ;
-reg            test_fail     ;
-reg [31:0]     read_data     ;
-
-reg  [127:0]   la_data_in;
 reg       flag;
 
 // SCLK
@@ -108,16 +90,6 @@
 
 integer i,j;
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-		la_data_in = 1;
-	end
 
 	`ifdef WFDUMP
 	   initial begin
@@ -126,15 +98,6 @@
 	   end
        `endif
 
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
 initial
 begin
 
@@ -171,15 +134,15 @@
    $display("###################################################");
    if(u_spim.err_cnt == 0) begin
       `ifdef GL
-          $display("Monitor: Standalone User SPI ISP (GL) Passed");
+          $display("Monitor: %m (GL) Passed");
       `else
-          $display("Monitor: Standalone User SPI ISP (RTL) Passed");
+          $display("Monitor: %m (RTL) Passed");
       `endif
    end else begin
        `ifdef GL
-           $display("Monitor: Standalone User SPI ISP (GL) Failed");
+           $display("Monitor: %m (GL) Failed");
        `else
-           $display("Monitor: Standalone User SPI ISP (RTL) Failed");
+           $display("Monitor: %m (RTL) Failed");
        `endif
     end
    $display("###################################################");
@@ -188,52 +151,6 @@
 end
 
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      (la_data_in) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
-
-// SSPI Slave I/F
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-    end
-`endif    
-
 assign io_in[5]  = 1'b0;
 assign io_in[21] = sclk;
 assign io_in[20] = sdi;
@@ -249,6 +166,5 @@
                 );
 
 
-`include "user_tasks.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/user_sram_exec/Makefile b/verilog/dv/user_sram_exec/Makefile
index 6e2a6cd..a43d3d7 100644
--- a/verilog/dv/user_sram_exec/Makefile
+++ b/verilog/dv/user_sram_exec/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -51,32 +51,32 @@
 vvp:  ${PATTERN:=.vvp}
 
 %.vvp: %_tb.v
-	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  user_sram_exec.c -o user_sram_exec.o
+	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -c -I./ -I$(YIFIVE_FIRMWARE_PATH) ${PATTERN}.c -o ${PATTERN}.o
 	${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las  -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\"  -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH)  $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
-	${GCC_PREFIX}-gcc -o user_sram_exec.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_sram_exec.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
-	${GCC_PREFIX}-objcopy -O verilog user_sram_exec.elf user_sram_exec.hex
-	${GCC_PREFIX}-objdump -D user_sram_exec.elf > user_sram_exec.dump
-	rm crt.o user_sram_exec.o
+	${GCC_PREFIX}-gcc -o ${PATTERN}.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld ${PATTERN}.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+	${GCC_PREFIX}-objcopy -O verilog ${PATTERN}.elf ${PATTERN}.hex
+	${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
+	rm crt.o ${PATTERN}.o
 ifeq ($(SIM),RTL)
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
 	$< -o $@ 
    endif
 else  
    ifeq ($(DUMP),OFF)
-	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
     else  
-	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
 	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
 	$< -o $@ 
diff --git a/verilog/dv/user_sram_exec/user_sram_exec.c b/verilog/dv/user_sram_exec/user_sram_exec.c
index 3f36137..0f0fa12 100644
--- a/verilog/dv/user_sram_exec/user_sram_exec.c
+++ b/verilog/dv/user_sram_exec/user_sram_exec.c
@@ -17,29 +17,18 @@
 
 
 #define SC_SIM_OUTPORT (0xf0000000)
-#define uint32_t  long
-#define uint16_t  int
+#include "int_reg_map.h"
+#include "common_misc.h"
+#include "common_bthread.h"
 
-#define reg_mprj_globl_reg0  (*(volatile uint32_t*)0x10020000) // Chip ID
-#define reg_mprj_globl_reg1  (*(volatile uint32_t*)0x10020004) // Global Config-0
-#define reg_mprj_globl_reg2  (*(volatile uint32_t*)0x10020008) // Global Config-1
-#define reg_mprj_globl_reg3  (*(volatile uint32_t*)0x1002000C) // Global Interrupt Mask
-#define reg_mprj_globl_reg4  (*(volatile uint32_t*)0x10020010) // Global Interrupt
-#define reg_mprj_globl_reg5  (*(volatile uint32_t*)0x10020014) // Multi functional sel
-#define reg_mprj_globl_soft0  (*(volatile uint32_t*)0x10020018) // Sof Register-0
-#define reg_mprj_globl_soft1  (*(volatile uint32_t*)0x1002001C) // Sof Register-1
-#define reg_mprj_globl_soft2  (*(volatile uint32_t*)0x10020020) // Sof Register-2
-#define reg_mprj_globl_soft3  (*(volatile uint32_t*)0x10020024) // Sof Register-3
-#define reg_mprj_globl_soft4 (*(volatile uint32_t*)0x10020028) // Sof Register-4
-#define reg_mprj_globl_soft5 (*(volatile uint32_t*)0x1002002C) // Sof Register-5
 // -------------------------------------------------------------------------
 // Test copying code into SRAM and running it from there.
 // -------------------------------------------------------------------------
 
 void test_function()
 {
-    reg_mprj_globl_soft2  = 0x33445566;  // Sig-2
-    reg_mprj_globl_soft3  = 0x44556677;  // Sig-3
+    reg_glbl_soft_reg_2  = 0x33445566;  // Sig-2
+    reg_glbl_soft_reg_3  = 0x44556677;  // Sig-3
 
     return;
 }
@@ -50,23 +39,31 @@
     uint16_t *src_ptr;
     uint16_t *dst_ptr;
 
+   // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+   // bit[7:0]   - core-0
+   // bit[15:8]  - core-1
+   // bit[23:16] - core-2
+   // bit[31:24] - core-3
+
+   reg_glbl_mail_box = 0x1 << (bthread_get_core_id() * 8); // Start of Main 
 
     src_ptr = &test_function;
     dst_ptr = func;
 
-    reg_mprj_globl_soft0  = 0x11223344;  // Sig-0
+    reg_glbl_soft_reg_0  = 0x11223344;  // Sig-0
     while (src_ptr < &main) {
 	*(dst_ptr++) = *(src_ptr++);
     }
 
     // Call the routine in SRAM
-    reg_mprj_globl_soft1  = 0x22334455;  // Sig-1
+    reg_glbl_soft_reg_1  = 0x22334455;  // Sig-1
     
     ((void(*)())func)();
 
-    reg_mprj_globl_soft4 = 0x55667788; // Sig-4
-    reg_mprj_globl_soft5 = 0x66778899; // Sig-5
+    reg_glbl_soft_reg_4 = 0x55667788; // Sig-4
+    reg_glbl_soft_reg_5 = 0x66778899; // Sig-5
 
     // Signal end of test
+   reg_glbl_mail_box = 0xff << (bthread_get_core_id() * 8); // Start of Main 
 }
 
diff --git a/verilog/dv/user_sram_exec/user_sram_exec_tb.v b/verilog/dv/user_sram_exec/user_sram_exec_tb.v
index 555fc4b..6e2bcf4 100644
--- a/verilog/dv/user_sram_exec/user_sram_exec_tb.v
+++ b/verilog/dv/user_sram_exec/user_sram_exec_tb.v
@@ -65,79 +65,45 @@
 `timescale 1 ns / 1 ns
 
 `include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
-module user_sram_exec_tb;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
+`define TB_HEX "user_sram_exec.hex"
+`define TB_TOP  user_sram_exec_tb
+module `TB_TOP;
 
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
+parameter real CLK1_PERIOD  = 25;
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg         test_fail;
-	reg [31:0] read_data;
-	integer    d_risc_id;
-
-
-
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
+`include "user_tasks.sv"
 
 	`ifdef WFDUMP
 	   initial begin
 	   	$dumpfile("simx.vcd");
-	   	$dumpvars(1, user_sram_exec_tb);
-	   	$dumpvars(1, user_sram_exec_tb.u_top);
-	   	$dumpvars(0, user_sram_exec_tb.u_top.u_riscv_top);
+	   	$dumpvars(1, `TB_TOP);
+	   	$dumpvars(1, `TB_TOP.u_top);
+	   	$dumpvars(0, `TB_TOP.u_top.u_riscv_top);
 	   end
        `endif
 
 	initial begin
 
 		$value$plusargs("risc_core_id=%d", d_risc_id);
+        init();
 
 		#200; // Wait for reset removal
 	        repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
 
 		// Remove Wb Reset
-		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+		//wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
 	        repeat (2) @(posedge clock);
 		#1;
 		// Remove all the reset
 		if(d_risc_id == 0) begin
 		     $display("STATUS: Working with Risc core 0");
-                     wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+             //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
 		end else if(d_risc_id == 1) begin
 		     $display("STATUS: Working with Risc core 1");
                      wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -150,24 +116,21 @@
 		end
 
 
-		// Repeat cycles of 1000 clock edges as needed to complete testbench
-		repeat (30) begin
-			repeat (1000) @(posedge clock);
-			// $display("+1000 cycles");
-		end
 
+        wait_riscv_boot();
+        wait_riscv_exit();
 
 		$display("Monitor: Reading Back the expected value");
 		// User RISC core expect to write these value in global
 		// register, read back and decide on pass fail
 		// 0x30000018  = 0x11223344; 
-                // 0x3000001C  = 0x22334455; 
-                // 0x30000020  = 0x33445566; 
-                // 0x30000024  = 0x44556677; 
-                // 0x30000028 = 0x55667788; 
-                // 0x3000002C = 0x66778899; 
+        // 0x3000001C  = 0x22334455; 
+        // 0x30000020  = 0x33445566; 
+        // 0x30000024  = 0x44556677; 
+        // 0x30000028 = 0x55667788; 
+        // 0x3000002C = 0x66778899; 
 
-                test_fail = 0;
+        test_fail = 0;
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_0,read_data,32'h11223344);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_1,read_data,32'h22334455);
 		wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_2,read_data,32'h33445566);
@@ -177,101 +140,53 @@
 
 
 	   
-	    	$display("###################################################");
-          	if(test_fail == 0) begin
-		   `ifdef GL
-	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
-		   `else
-		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
-		   `endif
-	        end else begin
-		    `ifdef GL
-	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
-		    `else
-		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
-		    `endif
+	    $display("###################################################");
+        if(test_fail == 0) begin
+		`ifdef GL
+	    	$display("Monitor: %m (GL) Passed");
+		`else
+		    $display("Monitor: %m (RTL) Passed");
+		`endif
+	    end else begin
+		`ifdef GL
+	       $display("Monitor: %m (GL) Failed");
+		`else
+		   $display("Monitor: %m (RTL) Failed");
+		`endif
 		 end
-	    	$display("###################################################");
+	   	 $display("###################################################");
 	    $finish;
 	end
 
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK 
+assign io_in[5]  = 1'b1; // RESET
+assign io_in[21] = 1'b0 ; // SPIS SCK 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
 
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
 //  user core using the gpio pads
 //  ----------------------------------------------------
 
-   wire flash_clk = io_out[24];
-   wire flash_csb = io_out[25];
+   wire flash_clk = io_out[28];
+   wire flash_csb = io_out[29];
    // Creating Pad Delay
-   wire #1 io_oeb_29 = io_oeb[29];
-   wire #1 io_oeb_30 = io_oeb[30];
-   wire #1 io_oeb_31 = io_oeb[31];
-   wire #1 io_oeb_32 = io_oeb[32];
-   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
-   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
-   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
-   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+   wire #1 io_oeb_29 = io_oeb[33];
+   wire #1 io_oeb_30 = io_oeb[34];
+   wire #1 io_oeb_31 = io_oeb[35];
+   wire #1 io_oeb_32 = io_oeb[36];
+   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
 
-   assign io_in[29] = flash_io0;
-   assign io_in[30] = flash_io1;
-   assign io_in[31] = flash_io2;
-   assign io_in[32] = flash_io3;
+   assign io_in[33] = flash_io0;
+   assign io_in[34] = flash_io1;
+   assign io_in[35] = flash_io2;
+   assign io_in[36] = flash_io3;
 
    // Quard flash
-     s25fl256s #(.mem_file_name("user_sram_exec.hex"),
+     s25fl256s #(.mem_file_name(`TB_HEX),
 	         .otp_file_name("none"),
                  .TimingModel("S25FL512SAGMFI010_F_30pF")) 
 		 u_spi_flash_256mb (
@@ -288,137 +203,6 @@
        );
 
 
-
-
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/user_sspi/Makefile b/verilog/dv/user_sspi/Makefile
index ddc2549..9aa2e3c 100644
--- a/verilog/dv/user_sspi/Makefile
+++ b/verilog/dv/user_sspi/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_sspi/user_sspi_tb.v b/verilog/dv/user_sspi/user_sspi_tb.v
index 11f2901..1650d50 100644
--- a/verilog/dv/user_sspi/user_sspi_tb.v
+++ b/verilog/dv/user_sspi/user_sspi_tb.v
@@ -71,56 +71,17 @@
 
 `define TB_GLBL    user_sspi_tb
 
-
-
-
 module user_sspi_tb;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
-
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
+`include "user_tasks.sv"
 
 
 	reg [1:0] spi_chip_no;
 
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg        test_fail;
-	reg [31:0] read_data;
-
-
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
 
 	`ifdef WFDUMP
 	   initial begin
@@ -391,61 +352,23 @@
 
         if(test_fail == 0) begin
 		`ifdef GL
-	    	$display("Monitor: SPI Master Mode (GL) Passed");
+	    	$display("Monitor: %m (GL) Passed");
 		`else
-		    $display("Monitor: SPI Master Mode (RTL) Passed");
+		    $display("Monitor: %m (RTL) Passed");
 		`endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: SPI Master Mode (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: SPI Master Mode (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	        $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
-
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
+assign io_in[5]  = 1'b1; // RESET
 
 
 `ifndef GL // Drive Power for Hold Fix Buf
@@ -529,137 +452,6 @@
 end
 endtask
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("STATUS: WB USER ACCESS WRITE Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  //$display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     user_sspi_tb.test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 `include "sspi_task.v"
-`include "user_tasks.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/user_timer/Makefile b/verilog/dv/user_timer/Makefile
index 6479120..0bf3da4 100644
--- a/verilog/dv/user_timer/Makefile
+++ b/verilog/dv/user_timer/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_timer/user_timer_tb.v b/verilog/dv/user_timer/user_timer_tb.v
index d39122d..62aa667 100644
--- a/verilog/dv/user_timer/user_timer_tb.v
+++ b/verilog/dv/user_timer/user_timer_tb.v
@@ -72,55 +72,22 @@
 
 
 module user_timer_tb;
-	reg clock;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+parameter real CLK1_PERIOD  = 25;
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
-
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
+`include "user_tasks.sv"
 
 
-	reg [1:0] spi_chip_no;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg        test_fail;
-	reg [31:0] read_data;
 	reg [31:0] OneUsPeriod;
-        integer    test_step;
-        wire       clock_mon;
+    integer    test_step;
+    wire       clock_mon;
 
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
 
 	initial begin
 		OneUsPeriod = 1;
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
 	end
 
 	`ifdef WFDUMP
@@ -145,36 +112,36 @@
 	        repeat (2) @(posedge clock);
 		#1;
 
-                // Remove the reset
+        // Remove the reset
 		// Remove WB and SPI/UART Reset, Keep CORE under Reset
-                //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
+        //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
 
 		// config 1us based on system clock - 1000/25ns = 40 
-                wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_GLBL,39);
+        wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_GLBL,39);
 
 		// Enable Timer Interrupt
-                wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_MSK,'h007);
+        wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_MSK,'h007);
 
 		test_fail = 0;
-	        repeat (200) @(posedge clock);
-                wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 10
+	    repeat (200) @(posedge clock);
+        wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 10
 
-	        $display("Step-1, Timer-0: 1us * 100 = 100us; Timer-1: 200us; Timer-2: 300us");
-	        test_step = 1;
-                wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_0,'h0001_0063);
-                wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_1,'h0001_00C7);
-                wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_2,'h0001_012B);
-	        timer_monitor(OneUsPeriod*100,OneUsPeriod*200,OneUsPeriod*300);
+	    $display("Step-1, Timer-0: 1us * 100 = 100us; Timer-1: 200us; Timer-2: 300us");
+	    test_step = 1;
+        wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_0,'h0001_0063);
+        wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_1,'h0001_00C7);
+        wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_2,'h0001_012B);
+	    timer_monitor(OneUsPeriod*100,OneUsPeriod*200,OneUsPeriod*300);
 
 		$display("Checking the Timer Interrupt generation and clearing");
 
 		// Disable the Timer - To avoid multiple interrupt generation
 		// during status check and interrupt clearing
-                wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_0,'h0000_0063);
-                wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_1,'h0000_00C7);
-                wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_2,'h0000_012B);
+        wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_0,'h0000_0063);
+        wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_1,'h0000_00C7);
+        wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_2,'h0000_012B);
 
-                wb_user_core_read(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_STAT,read_data);
+        wb_user_core_read(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_STAT,read_data);
 		if((u_top.u_pinmux.irq_lines[2:0] == 3'b111) && (read_data[2:0] == 3'b111)) begin
 		    $display("STATUS: Timer Interrupt detected ");
 		    // Clearing the Timer Interrupt
@@ -228,23 +195,21 @@
 
           	if(test_fail == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: Timer Mode (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: Timer Mode (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: Timer Mode (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: Timer Mode (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	        $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
 
 wire timer_intr0 = u_top.u_pinmux.timer_intr[0];
 wire timer_intr1 = u_top.u_pinmux.timer_intr[1];
@@ -297,49 +262,8 @@
 end
 endtask
 
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
-
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif    
+assign io_in[5]  = 1'b1; // RESET
 
 
 
@@ -352,137 +276,5 @@
 end
 endtask
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("STATUS: WB USER ACCESS WRITE Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  //$display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     `TB_GLBL.test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-
-`include "user_tasks.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/user_uart/Makefile b/verilog/dv/user_uart/Makefile
index fc9b113..70af457 100644
--- a/verilog/dv/user_uart/Makefile
+++ b/verilog/dv/user_uart/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
@@ -90,6 +90,6 @@
 # ---- Clean ----
 
 clean:
-	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.o *.dump
 
 .PHONY: clean hex all
diff --git a/verilog/dv/user_uart/user_uart.c b/verilog/dv/user_uart/user_uart.c
index b19a157..c9f5dd3 100644
--- a/verilog/dv/user_uart/user_uart.c
+++ b/verilog/dv/user_uart/user_uart.c
@@ -16,7 +16,7 @@
 // SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
 // //////////////////////////////////////////////////////////////////////////
 #define SC_SIM_OUTPORT (0xf0000000)
-#include "../c_func/inc/int_reg_map.h"
+#include "int_reg_map.h"
 #include "common_misc.h"
 #include "common_bthread.h"
 
diff --git a/verilog/dv/user_uart/user_uart_tb.v b/verilog/dv/user_uart/user_uart_tb.v
index e1db54f..8029645 100644
--- a/verilog/dv/user_uart/user_uart_tb.v
+++ b/verilog/dv/user_uart/user_uart_tb.v
@@ -82,33 +82,13 @@
 `define TB_HEX "user_uart.hex"
 `define TB_TOP  user_uart_tb
 module `TB_TOP;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
+`include "user_tasks.sv"
 
-reg            clock         ;
-reg            wb_rst_i      ;
-reg            power1, power2;
-reg            power3, power4;
-
-reg            wbd_ext_cyc_i;  // strobe/request
-reg            wbd_ext_stb_i;  // strobe/request
-reg [31:0]     wbd_ext_adr_i;  // address
-reg            wbd_ext_we_i;  // write
-reg [31:0]     wbd_ext_dat_i;  // data output
-reg [3:0]      wbd_ext_sel_i;  // byte enable
-
-wire [31:0]    wbd_ext_dat_o;  // data input
-wire           wbd_ext_ack_o;  // acknowlegement
-wire           wbd_ext_err_o;  // error
-
-// User I/O
-wire [37:0]    io_oeb        ;
-wire [37:0]    io_out        ;
-wire [37:0]    io_in         ;
-
-wire [37:0]    mprj_io       ;
-wire [7:0]     mprj_io_0     ;
-reg            test_fail     ;
-reg [31:0]     read_data     ;
 //----------------------------------
 // Uart Configuration
 // ---------------------------------
@@ -127,25 +107,10 @@
 reg [7:0]      uart_write_data [0:39];
 reg 	       uart_fifo_enable     ;	// fifo mode disable
 
-	integer    d_risc_id;
 
 integer i,j;
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
 
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
 
 	`ifdef WFDUMP
 	   initial begin
@@ -211,7 +176,7 @@
 	                          uart_stick_parity, uart_timeout, uart_divisor);
 
 
-    wait_riscv_boot(d_risc_id);
+    wait_riscv_boot();
    
    
    for (i=0; i<40; i=i+1)
@@ -252,15 +217,15 @@
       $display("###################################################");
       if(test_fail == 0) begin
          `ifdef GL
-             $display("Monitor: Standalone User UART Test (GL) Passed");
+             $display("Monitor: %m (GL) Passed");
          `else
-             $display("Monitor: Standalone User UART Test (RTL) Passed");
+             $display("Monitor: %m (RTL) Passed");
          `endif
       end else begin
           `ifdef GL
-              $display("Monitor: Standalone User UART Test (GL) Failed");
+              $display("Monitor: %m (GL) Failed");
           `else
-              $display("Monitor: Standalone User UART Test (RTL) Failed");
+              $display("Monitor: %m (RTL) Failed");
           `endif
        end
       $display("###################################################");
@@ -269,57 +234,12 @@
 end
 
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 assign io_in[21] = 1'b0; // CLOCK
 
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-    end
-`endif    
-
-
 //------------------------------------------------------
 //  Integrate the Serial flash with qurd support to
 //  user core using the gpio pads
@@ -377,135 +297,6 @@
 	);
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     `TB_TOP.test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/user_uart1/Makefile b/verilog/dv/user_uart1/Makefile
index 280fed2..0b2add5 100644
--- a/verilog/dv/user_uart1/Makefile
+++ b/verilog/dv/user_uart1/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_uart1/user_uart1.c b/verilog/dv/user_uart1/user_uart1.c
index e680062..c06b431 100644
--- a/verilog/dv/user_uart1/user_uart1.c
+++ b/verilog/dv/user_uart1/user_uart1.c
@@ -16,7 +16,7 @@
 // SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
 // //////////////////////////////////////////////////////////////////////////
 #define SC_SIM_OUTPORT (0xf0000000)
-#include "../c_func/inc/int_reg_map.h"
+#include "int_reg_map.h"
 #include "common_misc.h"
 #include "common_bthread.h"
 
diff --git a/verilog/dv/user_uart1/user_uart1_tb.v b/verilog/dv/user_uart1/user_uart1_tb.v
index cab2731..2d1c2b2 100644
--- a/verilog/dv/user_uart1/user_uart1_tb.v
+++ b/verilog/dv/user_uart1/user_uart1_tb.v
@@ -81,36 +81,17 @@
 `define TB_HEX "user_uart1.hex"
 `define TB_TOP  user_uart1_tb
 module `TB_TOP;
+parameter real CLK1_PERIOD  = 20; // 50Mhz
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-reg            clock         ;
-reg            wb_rst_i      ;
-reg            power1, power2;
-reg            power3, power4;
+`include "user_tasks.sv"
 
-reg            wbd_ext_cyc_i;  // strobe/request
-reg            wbd_ext_stb_i;  // strobe/request
-reg [31:0]     wbd_ext_adr_i;  // address
-reg            wbd_ext_we_i;  // write
-reg [31:0]     wbd_ext_dat_i;  // data output
-reg [3:0]      wbd_ext_sel_i;  // byte enable
-
-wire [31:0]    wbd_ext_dat_o;  // data input
-wire           wbd_ext_ack_o;  // acknowlegement
-wire           wbd_ext_err_o;  // error
-
-// User I/O
-wire [37:0]    io_oeb        ;
-wire [37:0]    io_out        ;
-wire [37:0]    io_in         ;
-
-wire [37:0]    mprj_io       ;
-wire [7:0]     mprj_io_0     ;
-reg            test_fail     ;
-reg [31:0]     read_data     ;
 //----------------------------------
 // Uart Configuration
 // ---------------------------------
-reg [1:0]      uart_data_bit        ;
+reg [1:0]  uart_data_bit        ;
 reg	       uart_stop_bits       ; // 0: 1 stop bit; 1: 2 stop bit;
 reg	       uart_stick_parity    ; // 1: force even parity
 reg	       uart_parity_en       ; // parity enable
@@ -125,25 +106,9 @@
 reg [7:0]      uart_write_data [0:39];
 reg 	       uart_fifo_enable     ;	// fifo mode disable
 
-	integer    d_risc_id;
 
 integer i,j;
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
-
-	always #12.5 clock <= (clock === 1'b0);
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
 
 	`ifdef WFDUMP
 	   initial begin
@@ -207,7 +172,7 @@
 	                          uart_stick_parity, uart_timeout, uart_divisor);
 
 
-    wait_riscv_boot(d_risc_id);
+    wait_riscv_boot();
    
    
    for (i=0; i<40; i=i+1)
@@ -248,15 +213,15 @@
       $display("###################################################");
       if(test_fail == 0) begin
          `ifdef GL
-             $display("Monitor: Standalone User UART Test (GL) Passed");
+             $display("Monitor: %m (GL) Passed");
          `else
-             $display("Monitor: Standalone User UART Test (RTL) Passed");
+             $display("Monitor: %m (RTL) Passed");
          `endif
       end else begin
           `ifdef GL
-              $display("Monitor: Standalone User UART Test (GL) Failed");
+              $display("Monitor: %m (GL) Failed");
           `else
-              $display("Monitor: Standalone User UART Test (RTL) Failed");
+              $display("Monitor: %m (RTL) Failed");
           `endif
        end
       $display("###################################################");
@@ -265,45 +230,6 @@
 end
 
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
-
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 assign io_in[21] = 1'b0; // CLOCK
@@ -373,135 +299,6 @@
 	);
 
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     `TB_TOP.test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
-`include "user_tasks.sv"
 endmodule
 `include "s25fl256s.sv"
 `default_nettype wire
diff --git a/verilog/dv/user_uart_master/Makefile b/verilog/dv/user_uart_master/Makefile
index b54f457..f325cea 100644
--- a/verilog/dv/user_uart_master/Makefile
+++ b/verilog/dv/user_uart_master/Makefile
@@ -27,7 +27,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_uart_master/user_uart_master_tb.v b/verilog/dv/user_uart_master/user_uart_master_tb.v
index 2d909f4..33277cb 100644
--- a/verilog/dv/user_uart_master/user_uart_master_tb.v
+++ b/verilog/dv/user_uart_master/user_uart_master_tb.v
@@ -70,33 +70,17 @@
 `include "uart_agent.v"
 `include "user_params.svh"
 
-module user_uart_master_tb;
+`define TB_TOP  user_uart_master_tb
 
-reg            clock         ;
-reg            wb_rst_i      ;
-reg            power1, power2;
-reg            power3, power4;
+module `TB_TOP;
 
-reg            wbd_ext_cyc_i;  // strobe/request
-reg            wbd_ext_stb_i;  // strobe/request
-reg [31:0]     wbd_ext_adr_i;  // address
-reg            wbd_ext_we_i;  // write
-reg [31:0]     wbd_ext_dat_i;  // data output
-reg [3:0]      wbd_ext_sel_i;  // byte enable
+parameter real CLK1_PERIOD  = 25;
+parameter real CLK2_PERIOD = 2.5;
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-wire [31:0]    wbd_ext_dat_o;  // data input
-wire           wbd_ext_ack_o;  // acknowlegement
-wire           wbd_ext_err_o;  // error
+`include "user_tasks.sv"
 
-// User I/O
-wire [37:0]    io_oeb        ;
-wire [37:0]    io_out        ;
-wire [37:0]    io_in         ;
-
-wire [37:0]    mprj_io       ;
-wire [7:0]     mprj_io_0     ;
-reg            test_fail     ;
-reg [31:0]     read_data     ;
 //----------------------------------
 // Uart Configuration
 // ---------------------------------
@@ -115,44 +99,24 @@
 reg [7:0]      uart_write_data [0:39];
 reg 	       uart_fifo_enable     ;	// fifo mode disable
 
-reg  [127:0]   la_data_in;
 reg            flag;
 reg  [15:0]    strap_in;
 
 
 integer i,j;
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
 
-	always #12.5 clock <= (clock === 1'b0);
+`ifdef WFDUMP
+initial begin
+   $dumpfile("risc_boot.vcd");
+   $dumpvars(0, `TB_TOP);
+end
+`endif
 
-	initial begin
-		clock = 0;
-		la_data_in = 1;
-	end
-
-	`ifdef WFDUMP
-	   initial begin
-	   	$dumpfile("risc_boot.vcd");
-	   	$dumpvars(0, user_uart_master_tb);
-	   end
-       `endif
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
 initial
 begin
    strap_in = 0;
-   strap_in[`PSTRAP_UARTM_CFG] = 0; // uart master config control - load from LA
+   strap_in[`PSTRAP_UARTM_CFG] = 2'b11; // uart master config control - load from LA
    apply_strap(strap_in);
 
    uart_data_bit           = 2'b11;
@@ -189,9 +153,8 @@
    end
 
 
-
    // Remove Wb Reset
-   uartm_reg_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+   //uartm_reg_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
 
    repeat (2) @(posedge clock);
    #1;
@@ -218,15 +181,15 @@
    $display("###################################################");
    if(test_fail == 0) begin
       `ifdef GL
-          $display("Monitor: Standalone User UART Master (GL) Passed");
+          $display("Monitor: %m (GL) Passed");
       `else
-          $display("Monitor: Standalone User Uart Master (RTL) Passed");
+          $display("Monitor: %m (RTL) Passed");
       `endif
    end else begin
        `ifdef GL
-           $display("Monitor: Standalone User Uart Master (GL) Failed");
+           $display("Monitor: %m (GL) Failed");
        `else
-           $display("Monitor: Standalone User Uart Master (RTL) Failed");
+           $display("Monitor: %m (RTL) Failed");
        `endif
     end
    $display("###################################################");
@@ -235,54 +198,10 @@
 end
 
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i        (clock),  // System clock
-    .user_clock2     (1'b1),  // Real-time clock
-    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      (la_data_in) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
 assign io_in[5]  = 1'b1; // RESET
 assign io_in[21] = 1'b0; // CLOCK
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-    end
-`endif    
-
 
 //---------------------------
 //  UART Agent integration
@@ -301,6 +220,5 @@
 
 
 `include "uart_master_tasks.sv"
-`include "user_tasks.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/user_usb/Makefile b/verilog/dv/user_usb/Makefile
index 4422ccd..8ed7903 100644
--- a/verilog/dv/user_usb/Makefile
+++ b/verilog/dv/user_usb/Makefile
@@ -28,7 +28,7 @@
 
 export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
 ## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/common/firmware
 GCC_PREFIX?=riscv32-unknown-elf
 
 
diff --git a/verilog/dv/user_usb/user_usb_tb.v b/verilog/dv/user_usb/user_usb_tb.v
index b63b948..7c0dac5 100644
--- a/verilog/dv/user_usb/user_usb_tb.v
+++ b/verilog/dv/user_usb/user_usb_tb.v
@@ -52,40 +52,14 @@
 
 module user_usb_tb;
 
-parameter  USB_HPER   = 10.4167; // 48Mhz Half cycle
-parameter  USER2_HPER = 2.7777; // 180Mhz Half cycle
+parameter  CLK1_PERIOD   = 10.4167; // 48Mhz Half cycle
+parameter  CLK2_PERIOD = 2.7777; // 180Mhz Half cycle
+parameter real IPLL_PERIOD = 5.008;
+parameter real XTAL_PERIOD = 6;
 
-	reg clock;
-	reg user_clock2;
-	reg usb_48mhz_clk;
-	reg wb_rst_i;
-	reg power1, power2;
-	reg power3, power4;
+`include "user_tasks.sv"
 
-        reg        wbd_ext_cyc_i;  // strobe/request
-        reg        wbd_ext_stb_i;  // strobe/request
-        reg [31:0] wbd_ext_adr_i;  // address
-        reg        wbd_ext_we_i;  // write
-        reg [31:0] wbd_ext_dat_i;  // data output
-        reg [3:0]  wbd_ext_sel_i;  // byte enable
-
-        wire [31:0] wbd_ext_dat_o;  // data input
-        wire        wbd_ext_ack_o;  // acknowlegement
-        wire        wbd_ext_err_o;  // error
-
-	// User I/O
-	wire [37:0] io_oeb;
-	wire [37:0] io_out;
-	wire [37:0] io_in;
-
-
-	reg [1:0] spi_chip_no;
-
-	wire gpio;
-	wire [37:0] mprj_io;
-	wire [7:0] mprj_io_0;
-	reg        test_fail;
-	reg [31:0] read_data;
+    wire usb_48mhz_clk;
 
         //-----------------------------------
         // Register Interface
@@ -99,38 +73,8 @@
 
 	reg  [31:0]   RegBank [0:15];
 
-	// External clock is used by default.  Make this artificially fast for the
-	// simulation.  Normally this would be a slow clock and the digital PLL
-	// would be the fast clock.
 
-	always #12.5 clock <= (clock === 1'b0);
-
-	// 48Mhz clock generation
-	always begin
-          #USB_HPER     usb_48mhz_clk = 1'b0;
-          #USB_HPER     usb_48mhz_clk = 1'b1;
-        end
-
-	// USER Clock generation
-	always begin
-          #USER2_HPER     user_clock2 = 1'b0;
-          #USER2_HPER     user_clock2 = 1'b1;
-        end
-
-	initial begin
-		clock = 0;
-                wbd_ext_cyc_i ='h0;  // strobe/request
-                wbd_ext_stb_i ='h0;  // strobe/request
-                wbd_ext_adr_i ='h0;  // address
-                wbd_ext_we_i  ='h0;  // write
-                wbd_ext_dat_i ='h0;  // data output
-                wbd_ext_sel_i ='h0;  // byte enable
-	end
-	initial begin
-		wb_rst_i <= 1'b1;
-		#100;
-		wb_rst_i <= 1'b0;	    	// Release reset
-	end
+    assign usb_48mhz_clk = clock;
 
 	`ifdef WFDUMP
 	   initial begin
@@ -144,7 +88,7 @@
 	   end
        `endif
 
-        always@(posedge wb_rst_i  or posedge usb_48mhz_clk)
+        always@(posedge wb_rst_i  or posedge clock)
 	begin
 	   if(wb_rst_i == 1'b1) begin
               usbd_reg_rdata = 'h0;
@@ -166,7 +110,7 @@
 
 	initial begin
 		$dumpon;
-                        init();
+         init();
 		#200; // Wait for reset removal
 	        repeat (10) @(posedge clock);
 		$display("Monitor: Standalone User Risc Boot Test Started");
@@ -201,73 +145,29 @@
 
           	if(test_control.error_count == 0) begin
 		   `ifdef GL
-	    	       $display("Monitor: USB Mode (GL) Passed");
+	    	       $display("Monitor: %m (GL) Passed");
 		   `else
-		       $display("Monitor: USB Mode (RTL) Passed");
+		       $display("Monitor: %m (RTL) Passed");
 		   `endif
 	        end else begin
 		    `ifdef GL
-	    	        $display("Monitor: USB Mode (GL) Failed");
+	    	        $display("Monitor: %m (GL) Failed");
 		    `else
-		        $display("Monitor: USB Mode (RTL) Failed");
+		        $display("Monitor: %m (RTL) Failed");
 		    `endif
 		 end
 	    	$display("###################################################");
 	        $finish;
 	end
 
-wire USER_VDD1V8 = 1'b1;
-wire VSS = 1'b0;
-
-user_project_wrapper u_top(
-`ifdef USE_POWER_PINS
-    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
-    .vssd1(VSS),	// User area 1 digital ground
-`endif
-    .wb_clk_i    (clock       ),  // System clock
-    .user_clock2 (user_clock2 ),  // Real-time clock
-    .wb_rst_i    (wb_rst_i    ),  // Regular Reset signal
-
-    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
-    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
-    .wbs_adr_i   (wbd_ext_adr_i),  // address
-    .wbs_we_i    (wbd_ext_we_i),  // write
-    .wbs_dat_i   (wbd_ext_dat_i),  // data output
-    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
-
-    .wbs_dat_o   (wbd_ext_dat_o),  // data input
-    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
-
- 
-    // Logic Analyzer Signals
-    .la_data_in      ('1) ,
-    .la_data_out     (),
-    .la_oenb         ('0),
- 
-
-    // IOs
-    .io_in          (io_in)  ,
-    .io_out         (io_out) ,
-    .io_oeb         (io_oeb) ,
-
-    .user_irq       () 
-
-);
 // SSPI Slave I/F
-assign io_in[0]  = 1'b1; // RESET
+assign io_in[5]  = 1'b1; // RESET
 
 
 
     usb_agent u_usb_agent();
     test_control test_control();
 
-`ifndef GL // Drive Power for Hold Fix Buf
-    // All standard cell need power hook-up for functionality work
-    initial begin
-
-    end
-`endif  
-
 // Drive USB Pads
 //
 tri usbd_txdp = (io_oeb[24] == 1'b0) ? io_out[24] : 1'bz;
@@ -283,7 +183,7 @@
 
 usb1d_top u_usb_top(
 
-	.clk_i           (usb_48mhz_clk), 
+	.clk_i           (clock), 
 	.rstn_i          (!wb_rst_i),
  
 		// USB PHY Interface
@@ -421,137 +321,7 @@
 end
 endtask
 
-task wb_user_core_write;
-input [31:0] address;
-input [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h1;  // write
-  wbd_ext_dat_i =data;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  $display("STATUS: WB USER ACCESS WRITE Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read;
-input [31:0] address;
-output [31:0] data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  repeat (1) @(negedge clock);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  //$display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  repeat (2) @(posedge clock);
-end
-endtask
-
-task  wb_user_core_read_check;
-input [31:0] address;
-output [31:0] data;
-input [31:0] cmp_data;
-reg    [31:0] data;
-begin
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_adr_i =address;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='0;  // data output
-  wbd_ext_sel_i ='hF;  // byte enable
-  wbd_ext_cyc_i ='h1;  // strobe/request
-  wbd_ext_stb_i ='h1;  // strobe/request
-  wait(wbd_ext_ack_o == 1);
-  data  = wbd_ext_dat_o;  
-  repeat (1) @(posedge clock);
-  #1;
-  wbd_ext_cyc_i ='h0;  // strobe/request
-  wbd_ext_stb_i ='h0;  // strobe/request
-  wbd_ext_adr_i ='h0;  // address
-  wbd_ext_we_i  ='h0;  // write
-  wbd_ext_dat_i ='h0;  // data output
-  wbd_ext_sel_i ='h0;  // byte enable
-  if(data !== cmp_data) begin
-     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
-     user_usb_tb.test_fail = 1;
-  end else begin
-     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
-  end
-  repeat (2) @(posedge clock);
-end
-endtask
-
-
-`ifdef GL
-
-wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
-wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
-wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
-wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
-
-wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
-wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
-wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
-wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
-wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
-wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
-wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
-
-`endif
-
-/**
-`ifdef GL
-//-----------------------------------------------------------------------------
-// RISC IMEM amd DMEM Monitoring TASK
-//-----------------------------------------------------------------------------
-
-`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
-
-always@(posedge `RISC_CORE.wb_clk) begin
-    if(`RISC_CORE.wbd_imem_ack_i)
-          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
-    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
-    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
-          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
-end
-
-`endif
-**/
 `include "tests/usb_test1.v"
 `include "tests/usb_test2.v"
-`include "user_tasks.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/dv/wb_port/Makefile b/verilog/dv/wb_port/Makefile
index 3ec839e..c617d00 100644
--- a/verilog/dv/wb_port/Makefile
+++ b/verilog/dv/wb_port/Makefile
@@ -25,6 +25,7 @@
 CONFIG = caravel_user_project
 TOOLS?=/opt/riscv32i/
 
+export USER_FIRMWARE_PATH = $(DESIGNS)/verilog/dv/common/firmware
 ########################################################
 #include $(MCW_ROOT)/verilog/dv/make/env.makefile
 ########################################################
@@ -129,6 +130,7 @@
 	-I$(VERILOG_PATH)/dv/generated \
 	-I$(VERILOG_PATH)/dv/ \
 	-I$(VERILOG_PATH)/common \
+	-I$(USER_FIRMWARE_PATH) \
 	  $(CPUFLAGS) \
 	-Wl,-Bstatic,-T,$(LINKER_SCRIPT),--strip-debug \
 	-ffreestanding -nostdlib -o $@ $(SOURCE_FILES) $<
diff --git a/verilog/dv/wb_port/wb_port.c b/verilog/dv/wb_port/wb_port.c
index 303eb20..4c7a868 100644
--- a/verilog/dv/wb_port/wb_port.c
+++ b/verilog/dv/wb_port/wb_port.c
@@ -18,7 +18,7 @@
 // This include is relative to $CARAVEL_PATH (see Makefile)
 #include <defs.h>
 #include <stub.c>
-#include "../c_func/inc/ext_reg_map.h"
+#include "ext_reg_map.h"
 
 
 
@@ -97,7 +97,7 @@
     // Remove Reset
     reg_glbl_cfg0 = 0x01f;
 
-    if (reg_glbl_chip_id != 0x82681501) bFail = 1;
+    if (reg_glbl_chip_id != 0x82684501) bFail = 1;
     if (bFail == 1) reg_mprj_datal = 0xAB610000;
 
     // write software write & read Register
diff --git a/verilog/dv/wb_port/wb_port_tb.v b/verilog/dv/wb_port/wb_port_tb.v
index ba2cae8..271e092 100644
--- a/verilog/dv/wb_port/wb_port_tb.v
+++ b/verilog/dv/wb_port/wb_port_tb.v
@@ -49,15 +49,15 @@
 	initial begin
 		$dumpfile("simx.vcd");
 		$dumpvars(1, wb_port_tb);
-		$dumpvars(1, wb_port_tb.uut);
-		$dumpvars(1, wb_port_tb.uut.mgmt_buffers);
-		$dumpvars(1, wb_port_tb.uut.housekeeping);
-		$dumpvars(1, wb_port_tb.uut.pll);
-		$dumpvars(1, wb_port_tb.uut.soc);
-		$dumpvars(1, wb_port_tb.uut.soc.core);
-		$dumpvars(1, wb_port_tb.uut.mprj);
-		$dumpvars(1, wb_port_tb.uut.mprj.u_wb_host);
-		//$dumpvars(2, wb_port_tb.uut.mprj.u_pinmux);
+		$dumpvars(1, wb_port_tb.u_top);
+		$dumpvars(1, wb_port_tb.u_top.mgmt_buffers);
+		$dumpvars(1, wb_port_tb.u_top.housekeeping);
+		$dumpvars(1, wb_port_tb.u_top.pll);
+		$dumpvars(1, wb_port_tb.u_top.soc);
+		$dumpvars(1, wb_port_tb.u_top.soc.core);
+		$dumpvars(1, wb_port_tb.u_top.mprj);
+		$dumpvars(1, wb_port_tb.u_top.mprj.u_wb_host);
+		//$dumpvars(2, wb_port_tb.u_top.mprj.u_pinmux);
 	end
        `endif
 
@@ -71,9 +71,9 @@
 		$display("%c[1;31m",27);
 		$display ("##########################################################");
 		`ifdef GL
-			$display ("Monitor: Timeout, Test Mega-Project WB Port (GL) Failed");
+			$display ("Monitor: Timeout, %m (GL) Failed");
 		`else
-			$display ("Monitor: Timeout, Test Mega-Project WB Port (RTL) Failed");
+			$display ("Monitor: Timeout, %m (RTL) Failed");
 		`endif
 		$display ("##########################################################");
 		$display("%c[0m",27);
@@ -81,24 +81,23 @@
 	end
 
 	initial begin
+       init();
 	   wait(checkbits == 16'h AB60);
 		$display("Monitor: MPRJ-Logic WB Started");
 		wait(checkbits == 16'h AB6A);
 		$display ("##########################################################");
 		`ifdef GL
-	    	$display("Monitor: Mega-Project WB (GL) Passed");
+	    	$display("Monitor: %m (GL) Passed");
 		`else
-		    $display("Monitor: Mega-Project WB (RTL) Passed");
+		    $display("Monitor: %m (RTL) Passed");
 		`endif
 		$display ("##########################################################");
 	    $finish;
 	end
 
 	initial begin
-		RSTB <= 1'b0;
 		CSB  <= 1'b1;		// Force CSB high
 		#2000;
-		RSTB <= 1'b1;	    	// Release reset
 		#170000;
 		CSB = 1'b0;		// CSB can be released
 	end
@@ -133,7 +132,7 @@
 	wire USER_VDD1V8 = power4;
 	wire VSS = 1'b0;
 
-	caravel uut (
+	caravel u_top (
 		.vddio	  (VDD3V3),
 		.vssio	  (VSS),
 		.vdda	  (VDD3V3),
@@ -174,5 +173,7 @@
     initial begin
     end
 `endif    
+
+`include "caravel_task.sv"
 endmodule
 `default_nettype wire
diff --git a/verilog/gl/pinmux_top.v.gz b/verilog/gl/pinmux_top.v.gz
index 72c7b5e..bcb11f4 100644
--- a/verilog/gl/pinmux_top.v.gz
+++ b/verilog/gl/pinmux_top.v.gz
Binary files differ
diff --git a/verilog/gl/uart_i2c_usb_spi_top.v.gz b/verilog/gl/uart_i2c_usb_spi_top.v.gz
index 592081c..f7ca1de 100644
--- a/verilog/gl/uart_i2c_usb_spi_top.v.gz
+++ b/verilog/gl/uart_i2c_usb_spi_top.v.gz
Binary files differ
diff --git a/verilog/gl/user_project_wrapper.v.gz b/verilog/gl/user_project_wrapper.v.gz
index 3bc912f..b39bb63 100644
--- a/verilog/gl/user_project_wrapper.v.gz
+++ b/verilog/gl/user_project_wrapper.v.gz
Binary files differ
diff --git a/verilog/gl/wb_host.v.gz b/verilog/gl/wb_host.v.gz
index e7d0074..782aa97 100644
--- a/verilog/gl/wb_host.v.gz
+++ b/verilog/gl/wb_host.v.gz
Binary files differ
diff --git a/verilog/includes/includes.rtl.caravel_user_project b/verilog/includes/includes.rtl.caravel_user_project
index 90cefb2..1779d63 100644
--- a/verilog/includes/includes.rtl.caravel_user_project
+++ b/verilog/includes/includes.rtl.caravel_user_project
@@ -3,9 +3,9 @@
 +incdir+$(USER_PROJECT_VERILOG)/rtl/i2cm/src/includes
 +incdir+$(USER_PROJECT_VERILOG)/rtl/usb1_host/src/includes
 +incdir+$(USER_PROJECT_VERILOG)/rtl/yifive/ycr4c/src/includes
-+incdir+$(USER_PROJECT_VERILOG)/dv/bfm
-+incdir+$(USER_PROJECT_VERILOG)/dv/model
-+incdir+$(USER_PROJECT_VERILOG)/dv/agents
++incdir+$(USER_PROJECT_VERILOG)/dv/common/bfm
++incdir+$(USER_PROJECT_VERILOG)/dv/common/model
++incdir+$(USER_PROJECT_VERILOG)/dv/common/agents
 $(USER_PROJECT_VERILOG)/rtl/user_reg_map.v
 -v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/pinmux_top.sv
 -v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/pinmux.sv
@@ -68,7 +68,8 @@
 -v $(USER_PROJECT_VERILOG)/rtl/lib/ser_shift.sv
 -v $(USER_PROJECT_VERILOG)/rtl/digital_core/src/glbl_cfg.sv
 -v $(USER_PROJECT_VERILOG)/rtl/wb_host/src/wb_host.sv
--v $(USER_PROJECT_VERILOG)/rtl/wb_host/src/wb_reset_fsm.sv
+-v $(USER_PROJECT_VERILOG)/rtl/wb_host/src/wbh_reset_fsm.sv
+-v $(USER_PROJECT_VERILOG)/rtl/wb_host/src/wbh_reg.sv
 -v $(USER_PROJECT_VERILOG)/rtl/sspis/src/sspis_top.sv
 -v $(USER_PROJECT_VERILOG)/rtl/sspis/src/sspis_if.sv
 -v $(USER_PROJECT_VERILOG)/rtl/sspis/src/spi2wb.sv
@@ -78,7 +79,6 @@
 -v $(USER_PROJECT_VERILOG)/rtl/wb_interconnect/src/wb_arb.sv
 -v $(USER_PROJECT_VERILOG)/rtl/wb_interconnect/src/wb_slave_port.sv
 -v $(USER_PROJECT_VERILOG)/rtl/wb_interconnect/src/wb_interconnect.sv
-
 -v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_hdu.sv
 -v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_tdu.sv
 -v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr4c/src/core/pipeline/ycr_ipic.sv
diff --git a/verilog/rtl/digital_pll/src/digital_pll.v b/verilog/rtl/digital_pll/src/digital_pll.v
index a4f189b..79cb52e 100644
--- a/verilog/rtl/digital_pll/src/digital_pll.v
+++ b/verilog/rtl/digital_pll/src/digital_pll.v
@@ -15,8 +15,12 @@
 
 
 /*****************************************************************
+Formula clock period: 1.168 + (bcount * 0.012)
 
-Offset	bcount	4x clock period	clock period (ns)	clock (Mhz)
+Example for bcount: 10
+        clock period = 1.168 + (10 *0.012) = 1.288
+
+Offset	bcount	clock period	 4xclock period (ns)	clock (Mhz)
 1.168	0	    1.168	            4.672	        214.041095890411
 1.168	1	    1.18	            4.72	        211.864406779661
 1.168	2	    1.192	            4.768	        209.731543624161
diff --git a/verilog/rtl/digital_pll/src/digital_pll_controller.v b/verilog/rtl/digital_pll/src/digital_pll_controller.v
index ae13d9d..73b5d05 100644
--- a/verilog/rtl/digital_pll/src/digital_pll_controller.v
+++ b/verilog/rtl/digital_pll/src/digital_pll_controller.v
@@ -97,40 +97,43 @@
           (tint == 5'd25) ? 26'b1111101111111_1111111111111 :
                     26'b1111111111111_1111111111111;
    
-    always @(posedge clock or posedge reset) begin
-    if (reset == 1'b1) begin
+    always @(posedge clock or posedge reset) begin // {
+    if (reset == 1'b1) begin // {
         tval <= 7'd0;	// Note:  trim[0] must be zero for startup to work.
         oscbuf <= 3'd0;
         prep <= 3'd0;
         count0 <= 5'd0;
         count1 <= 5'd0;
 
-    end else begin
+    end  // }
+    else begin // {
         oscbuf <= {oscbuf[1:0], osc};
 
-        if (oscbuf[2] != oscbuf[1]) begin
-        count1 <= count0;
-        count0 <= 5'b00001;
-        prep <= {prep[1:0], 1'b1};
+        if (oscbuf[2] != oscbuf[1]) begin // {
+             count1 <= count0;
+             count0 <= 5'b00001;
+             prep   <= {prep[1:0], 1'b1};
 
-        if (prep == 3'b111) begin
-            if (sum > div) begin
-		if (tval < 127) begin
-            	    tval <= tval + 1;
-		end
-            end else if (sum < div) begin
-		if (tval > 0) begin
-            	    tval <= tval - 1;
-		end
-            end
-        end
-        end else begin
-        if (count0 != 5'b11111) begin
-                count0 <= count0 + 1;
-        end
-        end
-    end
-    end
+             if (prep == 3'b111) begin // {
+                if (sum > div) begin  // {
+		           if (tval < 127) begin // {
+                      tval <= tval + 1;
+		           end // }
+                end  // }
+                else if (sum < div) begin // {
+		           if (tval > 0) begin // {
+                      tval <= tval - 1;
+		           end // }
+                end // }
+             end  // }
+           end // } 
+           else begin  // {
+               if (count0 != 5'b11111) begin // {
+                 count0 <= count0 + 1;
+             end // }
+           end // }
+       end // }
+    end // }
 
 endmodule	// digital_pll_controller
 `default_nettype wire
diff --git a/verilog/rtl/lib/async_fifo.sv b/verilog/rtl/lib/async_fifo.sv
index cedffdb..fb29f42 100755
--- a/verilog/rtl/lib/async_fifo.sv
+++ b/verilog/rtl/lib/async_fifo.sv
@@ -58,7 +58,6 @@
 //-------------------------------------------
 // async FIFO
 //-----------------------------------------------
-`timescale  1ns/1ps
 
 module async_fifo (wr_clk,
                    wr_reset_n,
@@ -78,7 +77,7 @@
    parameter WR_FAST = 1'b1;
    parameter RD_FAST = 1'b1;
    parameter FULL_DP = DP;
-   parameter EMPTY_DP = 1'b0;
+   parameter EMPTY_DP = 'b0;
 
    parameter AW = (DP == 2)   ? 1 : 
 		  (DP == 4)   ? 2 :
@@ -154,7 +153,7 @@
     end
 
     wire [AW:0] grey_rd_ptr_dly ;
-    assign #1 grey_rd_ptr_dly = grey_rd_ptr;
+    assign grey_rd_ptr_dly = grey_rd_ptr;
 
     // read pointer synchronizer
     always @(posedge wr_clk or negedge wr_reset_n) begin
@@ -218,7 +217,7 @@
    assign rd_data  = (RD_FAST == 1) ? rd_data_c : rd_data_q;
 
     wire [AW:0] grey_wr_ptr_dly ;
-    assign #1 grey_wr_ptr_dly =  grey_wr_ptr;
+    assign grey_wr_ptr_dly =  grey_wr_ptr;
 
     // write pointer synchronizer
     always @(posedge rd_clk or negedge rd_reset_n) begin
diff --git a/verilog/rtl/lib/clk_ctl.v b/verilog/rtl/lib/clk_ctl.v
index 7e4478b..5851850 100644
--- a/verilog/rtl/lib/clk_ctl.v
+++ b/verilog/rtl/lib/clk_ctl.v
@@ -135,7 +135,7 @@
       end   // }
       else
       begin // {
-         high_count    <= clk_div_ratio[WD:1] + clk_div_ratio[0];
+         high_count    <= clk_div_ratio[WD:1] + {{WD-1{1'b0}},clk_div_ratio[0]};
          low_count     <= clk_div_ratio[WD:1] + 1;
          mclk_div      <= ~mclk_div;
       end   // }
diff --git a/verilog/rtl/pinmux/src/glbl_reg.sv b/verilog/rtl/pinmux/src/glbl_reg.sv
index b1266b7..5dffbf8 100644
--- a/verilog/rtl/pinmux/src/glbl_reg.sv
+++ b/verilog/rtl/pinmux/src/glbl_reg.sv
@@ -53,6 +53,7 @@
                        input logic            user_clock1            ,
                        input logic            user_clock2            ,
                        input logic            int_pll_clock          ,
+                       input logic            cpu_clk                ,
                        input logic            xtal_clk               ,
 
                        output logic            usb_clk                ,
@@ -61,6 +62,7 @@
                        // to/from Global Reset FSM
 	                    input  logic [31:0]    system_strap           ,
 	                    output logic [31:0]    strap_sticky           ,
+	                    output logic [1:0]     strap_uartm            ,
                        
 
                        // Global Reset control
@@ -97,7 +99,16 @@
                         
 
 		               input   logic [2:0]      timer_intr            ,
-		               input   logic [31:0]     gpio_intr             
+		               input   logic [31:0]     gpio_intr             ,
+
+                       // Digital PLL I/F
+                       output logic          cfg_pll_enb        , // Enable PLL
+                       output logic[4:0]     cfg_pll_fed_div    , // PLL feedback division ratio
+                       output logic          cfg_dco_mode       , // Run PLL in DCO mode
+                       output logic[25:0]    cfg_dc_trim        , // External trim for DCO mode
+                       output logic          pll_ref_clk        , // Input oscillator to match
+
+                       output logic          dbg_clk_mon
    ); 
 
 
@@ -149,7 +160,7 @@
 logic [31:0]   reg_31;  // Reserved
 
 logic           cs_int;
-
+logic [3:0]     cfg_mon_sel;
 
 assign       sw_addr       = reg_addr ;
 assign       sw_rd_en      = reg_cs & !reg_wr;
@@ -298,7 +309,6 @@
 
 glbl_rst_reg  #(32'h0) u_reg_1	(
 	      //List of Inputs
-          .e_reset_n  (e_reset_n     ),
 	      .s_reset_n  (s_reset_n     ),
           .rst_in     (rst_in        ),
 	      .clk        (mclk          ),
@@ -338,6 +348,7 @@
 	      .data_out   (reg_2         )
 	      );
 
+assign  cfg_mon_sel   = reg_2[7:4];
 assign  soft_irq      = reg_2[3]; 
 assign  user_irq      = reg_2[2:0]; 
 assign cfg_riscv_ctrl = reg_2[31:16];
@@ -423,6 +434,48 @@
 wire [7:0] cfg_rtc_clk_ctrl     = reg_6[7:0];
 wire [7:0] cfg_usb_clk_ctrl     = reg_6[15:8];
 
+//-----------------------------------------
+// Reg-7: PLL Control-1
+// PLL register we don't want to reset during system reboot
+// ----------------------------------------
+gen_32b_reg  #(32'h8) u_reg_7	(
+	      //List of Inputs
+	      .reset_n    (p_reset_n     ),
+	      .clk        (mclk          ),
+	      .cs         (sw_wr_en_7   ),
+	      .we         (wr_be         ),		 
+	      .data_in    (sw_reg_wdata  ),
+	      
+	      //List of Outs
+	      .data_out   (reg_7       )
+	      );
+
+assign     cfg_pll_enb         = reg_7[3];
+wire [2:0] cfg_ref_pll_div     = reg_7[2:0];
+//-----------------------------------------
+// Reg-2: PLL Control-2
+// PLL register we don't want to reset during system reboot
+// ----------------------------------------
+gen_32b_reg  #({1'b1,5'b00000,26'b0000000000000_1010101101001} ) u_reg_8	(
+	      //List of Inputs
+	      .reset_n    (p_reset_n     ),
+	      .clk        (mclk          ),
+	      .cs         (sw_wr_en_8   ),
+	      .we         (wr_be         ),		 
+	      .data_in    (sw_reg_wdata  ),
+	      
+	      //List of Outs
+	      .data_out   (reg_8       )
+	      );
+
+//------------------------------------------
+// PLL Trim Value
+//-----------------------------------------
+assign    cfg_dco_mode     = reg_8[31];
+assign    cfg_pll_fed_div  = reg_8[30:26];
+assign    cfg_dc_trim      = reg_8[25:0];
+
+
 
 //-------------------------------------------------
 // Strap control
@@ -441,7 +494,8 @@
 	      
 	      //List of Outs
            .strap_latch         (strap_latch ),
-	       .strap_sticky        (strap_sticky) 
+	       .strap_sticky        (strap_sticky),
+	       .strap_uartm         (strap_uartm) 
          );
 
 
@@ -693,4 +747,38 @@
        .clk_div_ratio (cfg_usb_clk_ratio)
    );
 
+// PLL Ref CLock
+
+clk_ctl #(2) u_pll_ref_clk (
+   // Outputs
+       .clk_o         (pll_ref_clk      ),
+   // Inputs
+       .mclk          (user_clock1      ),
+       .reset_n       (e_reset_n        ), 
+       .clk_div_ratio (cfg_ref_pll_div  )
+   );
+
+// Debug clock monitor optin
+assign dbg_clk_ref       = (cfg_mon_sel == 4'b000) ? user_clock1    :
+	                       (cfg_mon_sel == 4'b001) ? user_clock2    :
+	                       (cfg_mon_sel == 4'b010) ? xtal_clk     :
+	                       (cfg_mon_sel == 4'b011) ? int_pll_clock: 
+	                       (cfg_mon_sel == 4'b100) ? mclk         : 
+	                       (cfg_mon_sel == 4'b101) ? cpu_clk      : 
+	                       (cfg_mon_sel == 4'b110) ? usb_clk      : 
+	                       (cfg_mon_sel == 4'b111) ? rtc_clk      : 1'b0;
+
+//  DIv16 to debug monitor purpose
+
+clk_ctl #(3) u_dbgclk (
+   // Outputs
+       .clk_o         (dbg_clk_div16    ),
+   // Inputs
+       .mclk          (dbg_clk_ref      ),
+       .reset_n       (e_reset_n        ), 
+       .clk_div_ratio (4'hE             )
+   );
+
+ctech_clk_buf u_clkbuf_dbg (.A (dbg_clk_div16), . X(dbg_clk_mon));
+
 endmodule                       
diff --git a/verilog/rtl/pinmux/src/glbl_rst_reg.sv b/verilog/rtl/pinmux/src/glbl_rst_reg.sv
index cca7d0b..c0f8019 100644
--- a/verilog/rtl/pinmux/src/glbl_rst_reg.sv
+++ b/verilog/rtl/pinmux/src/glbl_rst_reg.sv
@@ -26,7 +26,6 @@
 **********************************************************************************/
 
 module  glbl_rst_reg	(
-	      input logic        e_reset_n,
 	      input logic        s_reset_n,
 	      //List of Inputs
           input logic [31:0] rst_in,
@@ -41,22 +40,23 @@
 
   parameter   RESET_DEFAULT    = 32'h0;  
 
-logic [31:0] data_out_l;
 
-always @ (posedge clk or negedge e_reset_n) begin 
-  if (e_reset_n == 1'b0) begin
+logic flag;
+always @ (posedge clk or negedge s_reset_n) begin 
+  if (s_reset_n == 1'b0) begin
     data_out       <= RESET_DEFAULT ;
-    data_out_l     <= 'h0 ;
-  end else if (s_reset_n == 1'b0) begin
-    data_out       <= RESET_DEFAULT ;
-    data_out_l     <= rst_in ;
+    flag           <= 1'b1;
   end else begin
-    data_out  <= data_out_l;
-    if(cs && we[0]) data_out_l[7:0]   <= data_in[7:0];
-    if(cs && we[1]) data_out_l[15:8]  <= data_in[15:8];
-    if(cs && we[2]) data_out_l[23:16] <= data_in[23:16];
-    if(cs && we[3]) data_out_l[31:24] <= data_in[31:24];
-  end
+      flag         <= 1'b0;
+      if (flag == 1'b1) begin
+        data_out    <= rst_in ;
+      end else begin
+        if(cs && we[0]) data_out[7:0]   <= data_in[7:0];
+        if(cs && we[1]) data_out[15:8]  <= data_in[15:8];
+        if(cs && we[2]) data_out[23:16] <= data_in[23:16];
+        if(cs && we[3]) data_out[31:24] <= data_in[31:24];
+      end
+   end
 end
 
 
diff --git a/verilog/rtl/pinmux/src/pinmux_top.sv b/verilog/rtl/pinmux/src/pinmux_top.sv
index 0de5eff..0b3121f 100755
--- a/verilog/rtl/pinmux/src/pinmux_top.sv
+++ b/verilog/rtl/pinmux/src/pinmux_top.sv
@@ -94,10 +94,12 @@
                         input  logic           cfg_strap_pad_ctrl     ,
 	                    input  logic [31:0]    system_strap           ,
 	                    output logic [31:0]    strap_sticky           ,
+                        output logic [1:0]     strap_uartm            ,
 
                         input logic            user_clock1            ,
                         input logic            user_clock2            ,
                         input logic            int_pll_clock          ,
+                        input logic            cpu_clk                ,
                         output logic           xtal_clk               ,
 
                         output logic           usb_clk                ,
@@ -182,14 +184,20 @@
 		       input    logic           spis_miso,
 		       output   logic           spis_mosi,
 
-                       // UART MASTER I/F
-                       output  logic            uartm_rxd ,
-                       input logic              uartm_txd  ,       
+               // UART MASTER I/F
+               output  logic            uartm_rxd ,
+               input logic              uartm_txd  ,       
 
-		               output  logic           pulse1m_mclk,
-	                   output  logic [31:0]    pinmux_debug,
+		       output  logic           pulse1m_mclk,
+	           output  logic [31:0]    pinmux_debug,
 
-		               input   logic           dbg_clk_mon
+               // Digital PLL I/F
+               output logic            cfg_pll_enb        , // Enable PLL
+               output logic[4:0]       cfg_pll_fed_div    , // PLL feedback division ratio
+               output logic            cfg_dco_mode       , // Run PLL in DCO mode
+               output logic[25:0]      cfg_dc_trim        , // External trim for DCO mode
+               output logic            pll_ref_clk         // Input oscillator to match
+
 
    ); 
 
@@ -198,6 +206,7 @@
 logic         s_reset_ssn;  // Sync Reset
 logic         p_reset_ssn;  // Sync Reset
 logic [15:0]  pad_strap_in;
+logic           dbg_clk_mon;
    
 /* clock pulse */
 //********************************************************
@@ -344,10 +353,12 @@
           .pad_strap_in                 (pad_strap_in            ),
           .system_strap                 (system_strap            ),
           .strap_sticky                 (strap_sticky            ),
+          .strap_uartm                  (strap_uartm             ),
 
           .user_clock1                  (user_clock1             ),
           .user_clock2                  (user_clock2             ),
           .int_pll_clock                (int_pll_clock           ),
+          .cpu_clk                      (cpu_clk                 ),
           .xtal_clk                     (xtal_clk                ),
 
           .usb_clk                      (usb_clk                 ),
@@ -387,7 +398,17 @@
 
 
           .timer_intr                   (timer_intr             ),
-          .gpio_intr                    (gpio_intr              )
+          .gpio_intr                    (gpio_intr              ),
+
+         // Digital PLL I/F
+         .cfg_pll_enb                   (cfg_pll_enb            ), // Enable PLL
+         .cfg_pll_fed_div               (cfg_pll_fed_div        ), // PLL feedback division ratio
+         .cfg_dco_mode                  (cfg_dco_mode           ), // Run PLL in DCO mode
+         .cfg_dc_trim                   (cfg_dc_trim            ), // External trim for DCO mode
+         .pll_ref_clk                   (pll_ref_clk            ), // Input oscillator to match
+
+         .dbg_clk_mon                   (dbg_clk_mon            )
+
 
 
    ); 
diff --git a/verilog/rtl/pinmux/src/strap_ctrl.sv b/verilog/rtl/pinmux/src/strap_ctrl.sv
index 643a6de..c0405b0 100644
--- a/verilog/rtl/pinmux/src/strap_ctrl.sv
+++ b/verilog/rtl/pinmux/src/strap_ctrl.sv
@@ -68,16 +68,14 @@
                  01 - 2 Div
                  10 - 4 Div
                  11 - 8 Div
-     bit [4]   - uart master config control
-                 0   - load from LA
-                 1   - constant value based on system clock selection (Default)
+     bit [4]   - Reserved
      bit [5]   - QSPI SRAM Mode Selection
-                 1'b0 - Single (Default)
-                 1'b1 - Quad
+                 1'b0 - Single 
+                 1'b1 - Quad   (Default)
      bit [7:6] - QSPI Fash Mode Selection
-                 2'b00 - Single (Default)
+                 2'b00 - Single 
                  2'b01 - Double
-                 2'b10 - Quad
+                 2'b10 - Quad   (Default)
                  2'b11 - QDDR
      bit [8]   - Riscv Reset control
                  0 - Keep Riscv on Reset
@@ -93,6 +91,11 @@
                  2'b01 - Default value + 2               
                  2'b10 - Default value + 4               
                  2'b11 - Default value - 4 
+     bit [4:13]   - uart master config control
+                 2'b00   - constant value based on system clock-50Mhz (Default)
+                 2'b01   - constant value based on system clock-40Mhz 
+                 2'b10   - constant value based on system clock-60Mhz (USB Ref Clock)
+                 2'b11   - load from LA
      bit [14:13] - Reserved
      bit [15]    - Strap Mode
                    0 - Normal
@@ -165,7 +168,8 @@
 	         
 	         //List of Outs
              output logic [15:0] strap_latch         ,
-	         output logic [31:0] strap_sticky 
+	         output logic [31:0] strap_sticky        ,
+             output logic [1:0]  strap_uartm           // Uart Master Strap Config
 
          );
 
@@ -195,13 +199,16 @@
                    pstrap_select[8]     , // bit[12]      - Riscv Reset control
                    pstrap_select[7:6]   , // bit[11:10]   - QSPI FLASH Mode Selection CS#0
                    pstrap_select[5]     , // bit[9]       - QSPI SRAM Mode Selection CS#2
-                   pstrap_select[4]     , // bit[8]       - uart master config control
+                   pstrap_select[4]     , // bit[8]       - Reserved
                    pstrap_select[3:2]   , // bit[7:6]     - riscv clock div
                    pstrap_select[1:0]   , // bit[5:4]     - riscv clock source sel
                    pstrap_select[3:2]   , // bit[3:2]     - wbs clock division
                    pstrap_select[1:0]     // bit[1:0]     - wbs clock source sel
                    };
 
+
+assign strap_uartm = strap_latch[`PSTRAP_UARTM_CFG];
+
 //------------------------------------
 // Generating strap latch
 //------------------------------------
diff --git a/verilog/rtl/sspis/src/sspis_if.sv b/verilog/rtl/sspis/src/sspis_if.sv
index 10a5d1d..0a1c4c5 100644
--- a/verilog/rtl/sspis/src/sspis_if.sv
+++ b/verilog/rtl/sspis/src/sspis_if.sv
@@ -100,8 +100,8 @@
 // sclk pos and ned edge generation
 logic     sck_l0,sck_l1,sck_l2;
 
-assign sck_pdetect = (!sck_l2 && sck_l1) ? 1'b1: 1'b0;
-assign sck_ndetect = (sck_l2 && !sck_l1) ? 1'b1: 1'b0;
+wire sck_pdetect = (!sck_l2 && sck_l1) ? 1'b1: 1'b0;
+wire sck_ndetect = (sck_l2 && !sck_l1) ? 1'b1: 1'b0;
 
 always @ (posedge sys_clk or negedge rst_n) begin
 if (!rst_n) begin
diff --git a/verilog/rtl/uart2wb/src/uart_msg_handler.v b/verilog/rtl/uart2wb/src/uart_msg_handler.v
index 471ff88..e6436e5 100755
--- a/verilog/rtl/uart2wb/src/uart_msg_handler.v
+++ b/verilog/rtl/uart2wb/src/uart_msg_handler.v
@@ -316,6 +316,11 @@
               TxMsgSize     <= TxMsgSize -1;
            end
         end
+      default: begin
+           State         <= `IDLE;
+           NextState     <= `IDLE;
+      end
+
    endcase
    end
 end
diff --git a/verilog/rtl/user_params.svh b/verilog/rtl/user_params.svh
index 7664338..a8b8341 100644
--- a/verilog/rtl/user_params.svh
+++ b/verilog/rtl/user_params.svh
@@ -4,13 +4,13 @@
 // ASCI Representation of RISC = 32'h8273_8343
 parameter CHIP_SIGNATURE = 32'h8273_8343;
 // Software Reg-1, Release date: <DAY><MONTH><YEAR>
-parameter CHIP_RELEASE_DATE = 32'h0309_2022;
+parameter CHIP_RELEASE_DATE = 32'h0709_2022;
 // Software Reg-2: Poject Revison 5.1 = 0005200
-parameter CHIP_REVISION   = 32'h0005_3000;
+parameter CHIP_REVISION   = 32'h0005_4000;
 
 parameter SKEW_RESET_VAL = 32'b0000_0000_1000_0111_1001_1000_1001_1000;
 
-parameter PSTRAP_DEFAULT_VALUE = 15'b000_0111_1011_0000;
+parameter PSTRAP_DEFAULT_VALUE = 15'b000_0111_1010_0000;
 
 /*****************************************************
 pad_strap_in decoding
@@ -24,10 +24,7 @@
                  01 - 2 Div       
                  10 - 4 Div
                  11 - 8 Div
-     bit [4]   - uart master config control
-                 0   - load from LA
-                 1   - constant value based 
-                       on system clock selection  (Default)
+     bit [4]   - Reserved
      bit [5]   - QSPI SRAM Mode Selection
                  1'b0 - Single    
                  1'b1 - Quad      (Default)
@@ -50,6 +47,11 @@
                  2'b01 - Default value + 2               
                  2'b10 - Default value + 4               
                  2'b11 - Default value - 4 
+     bit [4:13]   - uart master config control
+                 2'b00   - constant value based on system clock-50Mhz (Default)
+                 2'b01   - constant value based on system clock-40Mhz 
+                 2'b10   - constant value based on system clock-60Mhz (USB Ref Clock)
+                 2'b11   - load from LA
 
      bit[15]   - Strap Mode
                 0 - [14:0] loaded from pad
@@ -66,6 +68,7 @@
 `define PSTRAP_RISCV_CACHE_BYPASS  9
 `define PSTRAP_RISCV_SRAM_CLK_EDGE 10
 `define PSTRAP_CLK_SKEW            12:11
+`define PSTRAP_UARTM_CFG           14:13
 
 `define PSTRAP_DEFAULT_VALUE       15
 
diff --git a/verilog/rtl/user_project_wrapper.v b/verilog/rtl/user_project_wrapper.v
index e7c6c8a..0373cc9 100644
--- a/verilog/rtl/user_project_wrapper.v
+++ b/verilog/rtl/user_project_wrapper.v
@@ -182,7 +182,7 @@
 ////       wishbone slave clock generation config increase from   ////
 ////       3 to 4 bit support clock source selection              ////
 ////       B.  Changed Module: qspim                              ////
-//////      1. Bug fix in spi rise and fall pulse relation w.r.t  ////
+////        1. Bug fix in spi rise and fall pulse relation w.r.t  ////
 ////           spi_clk. Note: Previous version work only with     ////
 ////           spi clock config = 0x2                             ////
 ////        2. spi_oen generation fix for different spi mode      ////
@@ -261,6 +261,16 @@
 ////          D. reset fsm is implementation with soft reboot     ////
 ////             option                                           ////
 ////          E. strap based booting option added for qspi        ////
+////    5.4  Sept 7 2022, Dinesh A                                ////
+////          A. PLL configuration are moved from wb_host to      ////
+////          pinmux to help risc core to do pll config and reboot////
+////          B. PLL configuration are kept in p_reset_n to avoid ////
+////           initialized on soft reboot.                        ////
+////          C. Master Uart has two strap bit to control the     ////
+////          boot up config                                      ////
+////          2'b00 - 50Mhz, 2'b01 - 40Mhz, 2'b10 - 50Mhz,        ////
+////          2'b11 - LA control                                  ////
+////                                                              ////
 ////                                                              ////
 //////////////////////////////////////////////////////////////////////
 ////                                                              ////
@@ -743,6 +753,7 @@
 //---------------------------------------------------------------------
 wire [31:0]                    system_strap                           ;
 wire [31:0]                    strap_sticky                           ;
+wire [1:0]                     strap_uartm                            ;
 wire [1:0]  strap_qspi_flash       = system_strap[`STRAP_QSPI_FLASH];
 wire        strap_qspi_sram        = system_strap[`STRAP_QSPI_SRAM];
 wire        strap_qspi_pre_sram    = system_strap[`STRAP_QSPI_PRE_SRAM];
@@ -774,6 +785,8 @@
 
 assign la_data_out[127:0]    = {pinmux_debug,spi_debug,riscv_debug};
 
+wire   int_pll_clock       = pll_clk_out[0];
+
 
 wb_host u_wb_host(
 `ifdef USE_POWER_PINS
@@ -782,7 +795,7 @@
 `endif
           .user_clock1             (wb_clk_i                ),
           .user_clock2             (user_clock2             ),
-          .int_pll_clock           (int_pll_clock             ),
+          .int_pll_clock           (int_pll_clock           ),
 
           .cpu_clk                 (cpu_clk                 ),
 
@@ -794,6 +807,7 @@
           .cfg_strap_pad_ctrl      (cfg_strap_pad_ctrl      ),
 	      .system_strap            (system_strap            ),
 	      .strap_sticky            (strap_sticky            ),
+	      .strap_uartm             (strap_uartm             ),
 
           .wbd_int_rst_n           (wbd_int_rst_n           ),
           .wbd_pll_rst_n           (wbd_pll_rst_n           ),
@@ -831,13 +845,6 @@
 
           .cfg_clk_ctrl1           (cfg_clk_ctrl1           ),
 
-          .cfg_pll_enb             (cfg_pll_enb             ), 
-          .cfg_pll_fed_div         (cfg_pll_fed_div         ), 
-          .cfg_dco_mode            (cfg_dco_mode            ), 
-          .cfg_dc_trim             (cfg_dc_trim             ),
-          .pll_ref_clk             (pll_ref_clk             ), 
-          .pll_clk_out             (pll_clk_out             ), 
-
           .la_data_in              (la_data_in[17:0]        ),
 
           .uartm_rxd               (uartm_rxd               ),
@@ -847,9 +854,8 @@
           .ssn                     (sspis_ssn               ),
           .sdin                    (sspis_si                ),
           .sdout                   (sspis_so                ),
-          .sdout_oen               (                        ),
+          .sdout_oen               (                        )
 
-	  .dbg_clk_mon             (dbg_clk_mon             )
 
 
     );
@@ -1376,11 +1382,13 @@
           .cfg_strap_pad_ctrl      (cfg_strap_pad_ctrl      ),
           .system_strap            (system_strap            ),
           .strap_sticky            (strap_sticky            ),
+	      .strap_uartm             (strap_uartm             ),
 
           .user_clock1             (wb_clk_i                ),
           .user_clock2             (user_clock2             ),
           .int_pll_clock           (int_pll_clock           ),
           .xtal_clk                (xtal_clk                ),
+          .cpu_clk                 (cpu_clk                 ),
 
 
           .rtc_clk                 (rtc_clk                 ),
@@ -1468,8 +1476,12 @@
 
 	  .pinmux_debug            (pinmux_debug            ),
 
-	  .dbg_clk_mon             (dbg_clk_mon             )
 
+       .cfg_pll_enb            (cfg_pll_enb             ), 
+       .cfg_pll_fed_div        (cfg_pll_fed_div         ), 
+       .cfg_dco_mode           (cfg_dco_mode            ), 
+       .cfg_dc_trim            (cfg_dc_trim             ),
+       .pll_ref_clk            (pll_ref_clk             )
 
 
    ); 
diff --git a/verilog/rtl/user_reg_map.v b/verilog/rtl/user_reg_map.v
index 80de782..ff6a316 100644
--- a/verilog/rtl/user_reg_map.v
+++ b/verilog/rtl/user_reg_map.v
@@ -14,6 +14,7 @@
 `define ADDR_SPACE_PWM     32'h3002_0100
 `define ADDR_SPACE_TIMER   32'h3002_0180
 `define ADDR_SPACE_SEMA    32'h3002_0200
+`define ADDR_SPACE_WS281X  32'h3002_0280
 `define ADDR_SPACE_WBHOST  32'h3008_0000
 
 //--------------------------------------------------
@@ -23,7 +24,6 @@
 `define WBHOST_BANK_SEL           8'h04  // reg_1  - Bank Select
 `define WBHOST_CLK_CTRL1          8'h08  // reg_2  - Clock Control-1
 `define WBHOST_CLK_CTRL2          8'h0C  // reg_3  - Clock Control-2
-`define WBHOST_PLL_CTRL           8'h10  // reg_4  - PLL Control
 
 //--------------------------------------------------
 // GLOBAL Register
@@ -35,6 +35,8 @@
 `define GLBL_CFG_INTR_STAT     8'h10  // reg_4  - Global Interrupt
 `define GLBL_CFG_MUTI_FUNC     8'h14  // reg_5  - Multi functional sel
 `define GLBL_CFG_CLK_CTRL      8'h18  // reg_6  - RTC/USB CLK CTRL
+`define GLBL_CFG_PLL_CTRL1     8'h1C  // reg_7  - PLL Control-1
+`define GLBL_CFG_PLL_CTRL2     8'h20  // reg_8  - PLL Control-2
 `define GLBL_CFG_PAD_STRAP     8'h30  // Strap as seen in Pad
 `define GLBL_CFG_STRAP_STICKY  8'h34  // Sticky Strap used in next soft boot
 `define GLBL_CFG_SYSTEM_STRAP  8'h38  // Current System Strap
diff --git a/verilog/rtl/wb_host/src/wb_host.sv b/verilog/rtl/wb_host/src/wb_host.sv
index df3c656..e35f5cb 100644
--- a/verilog/rtl/wb_host/src/wb_host.sv
+++ b/verilog/rtl/wb_host/src/wb_host.sv
@@ -100,7 +100,7 @@
 
 
        // to/from Pinmux
-        output  logic              int_pll_clock     ,
+        input  logic               int_pll_clock     ,
         input   logic              xtal_clk          ,
 	    output  logic              e_reset_n         ,  // external reset
 	    output  logic              p_reset_n         ,  // power-on reset
@@ -108,6 +108,7 @@
         output  logic              cfg_strap_pad_ctrl,
 	    output  logic [31:0]       system_strap      ,
 	    input   logic [31:0]       strap_sticky      ,
+	    input   logic [1:0]        strap_uartm       ,
 
 
     // Master Port
@@ -142,13 +143,6 @@
        input   logic               wbs_err_i        ,  // error
 
        output logic [31:0]         cfg_clk_ctrl1    ,
-       // Digital PLL I/F
-       output logic                cfg_pll_enb      , // Enable PLL
-       output logic[4:0]           cfg_pll_fed_div  , // PLL feedback division ratio
-       output logic                cfg_dco_mode     , // Run PLL in DCO mode
-       output logic[25:0]          cfg_dc_trim      , // External trim for DCO mode
-       output logic                pll_ref_clk      , // Input oscillator to match
-       input  logic [1:0]          pll_clk_out      , // Two 90 degree clock phases
 
        input  logic [17:0]         la_data_in       ,
 
@@ -159,9 +153,8 @@
        input  logic                ssn              ,
        input  logic                sdin             ,
        output logic                sdout            ,
-       output logic                sdout_oen        ,
+       output logic                sdout_oen        
 
-       output logic                dbg_clk_mon
 
     );
 
@@ -174,27 +167,10 @@
 logic               wbs_rst_n;
 
 logic               reg_sel    ;
-logic [2:0]         sw_addr    ;
-logic               sw_rd_en   ;
-logic               sw_wr_en   ;
 logic [31:0]        reg_rdata  ;
-logic [31:0]        reg_out    ;
 logic               reg_ack    ;
-logic [7:0]         config_reg ;    
-logic [31:0]        clk_ctrl1 ;    
-logic [31:0]        clk_ctrl2 ;    
-logic               sw_wr_en_0;
-logic               sw_wr_en_1;
-logic               sw_wr_en_2;
-logic               sw_wr_en_3;
 logic [15:0]        cfg_bank_sel;
-logic [31:0]        reg_0;  // Software_Reg_0
-logic [8:0]         cfg_clk_ctrl2;
 
-logic  [31:0]       cfg_pll_ctrl; 
-logic  [3:0]        cfg_wb_clk_ctrl;
-logic  [3:0]        cfg_cpu_clk_ctrl;
-logic  [31:0]       cfg_glb_ctrl;
 
 
 // uart Master Port
@@ -235,10 +211,7 @@
 logic               wb_ack_int            ; // acknowlegement
 logic               wb_err_int            ; // error
 
-logic [3:0]         cfg_mon_sel           ;
-logic               pll_clk_div16         ;
-logic               pll_clk_div16_buf     ;
-logic [2:0]         cfg_ref_pll_div       ;
+logic               cfg_fast_sim          ;
 logic               arst_n                ;
 logic               soft_reboot           ;
 logic               clk_enb               ;
@@ -249,27 +222,6 @@
 wire      soft_boot_req     = strap_sticky[`STRAP_SOFT_REBOOT_REQ];
 
 
-//------------------------------------------
-// PLL Trim Value
-//-----------------------------------------
-assign    cfg_dco_mode     = cfg_pll_ctrl[31];
-assign    cfg_pll_fed_div  = cfg_pll_ctrl[30:26];
-assign    cfg_dc_trim      = cfg_pll_ctrl[25:0];
-
-//assign   int_pll_clock    = pll_clk_out[0];
-ctech_clk_buf u_clkbuf_pll     (.A (pll_clk_out[0]), . X(int_pll_clock));
-ctech_clk_buf u_clkbuf_pll_div (.A (pll_clk_div16), . X(pll_clk_div16_buf));
-
-
-// Debug clock monitor optin
-assign dbg_clk_mon  = (cfg_mon_sel == 4'b000) ? pll_clk_div16_buf:
-	                  (cfg_mon_sel == 4'b001) ? pll_ref_clk  :
-	                  (cfg_mon_sel == 4'b010) ? wbs_clk_out  :
-	                  (cfg_mon_sel == 4'b011) ? cpu_clk_int  : 1'b0;
-
-
-
-
 //--------------------------------------------------------------------------------
 // Look like wishbone reset removed early than user Power up sequence
 // To control the reset phase, we have added additional control through la[0]
@@ -294,7 +246,7 @@
 //------------------------------------------
 // Keep WBS in Ref clock during initial boot to strap loading 
 logic force_refclk;
-wb_reset_fsm u_reset_fsm (
+wbh_reset_fsm u_reset_fsm (
 	      .clk                 (wbm_clk_i   ),
 	      .e_reset_n           (e_reset_n   ),  // external reset
           .cfg_fast_sim        (cfg_fast_sim),
@@ -312,19 +264,29 @@
 //-------------------------------------------------
 // UART2WB HOST
 //    Uart Baud-16x computation
-//      Assumption is default wb clock is 40Mhz 
+//      Assumption is default wb clock is 50Mhz 
 //      For 9600 Baud
-//        40,000,000/(9600*16) = 260;
-//      Configured Value = 260-1 = 259
+//        50,000,000/(9600*16) = 324;
+//      Configured Value = 325-2 = 324
+//      Internally we have used pos and neg counter
+//      it has additional 1 cycle additional count,
+//      so we are subtracting desired count by 2
+// strap_uartm
+//     2'b00 - 50Mhz - 324
+//     2'b01 - 40Mhz - 258
+//     2'b10 - 60Mhz - 389
+//     2'b11 - Load from LA
 //-------------------------------------------------
 
-wire strap_uart_cfg_mode = system_strap[`STRAP_UARTM_CFG];
 
-wire       cfg_uartm_tx_enable   = (strap_uart_cfg_mode==0) ? la_data_in[1]     : 1'b1;
-wire       cfg_uartm_rx_enable   = (strap_uart_cfg_mode==0) ? la_data_in[2]     : 1'b1;
-wire       cfg_uartm_stop_bit    = (strap_uart_cfg_mode==0) ? la_data_in[3]     : 1'b1;
-wire [11:0]cfg_uart_baud_16x     = (strap_uart_cfg_mode==0) ? la_data_in[15:4]  : 258;
-wire [1:0] cfg_uartm_cfg_pri_mod = (strap_uart_cfg_mode==0) ? la_data_in[17:16] : 2'b0;
+wire       cfg_uartm_tx_enable   = (strap_uartm==2'b11) ? la_data_in[1]     : 1'b1;
+wire       cfg_uartm_rx_enable   = (strap_uartm==2'b11) ? la_data_in[2]     : 1'b1;
+wire       cfg_uartm_stop_bit    = (strap_uartm==2'b11) ? la_data_in[3]     : 1'b1;
+wire [1:0] cfg_uartm_cfg_pri_mod = (strap_uartm==2'b11) ? la_data_in[17:16] : 2'b0;
+
+wire [11:0]cfg_uart_baud_16x     = (strap_uartm==2'b00) ? 324:
+                                   (strap_uartm==2'b01) ? 258:
+                                   (strap_uartm==2'b10) ? 389: la_data_in[15:4];
 
 
 // UART Master
@@ -450,10 +412,10 @@
 ctech_delay_buf u_delay2_stb2 (.X(wb_stb_d3),.A(wb_stb_d2));
 always_ff @(negedge s_reset_n or posedge wbm_clk_i) begin
     if ( s_reset_n == 1'b0 ) begin
-        wb_req    <= '0;
-	wb_dat_o <= '0;
-	wb_ack_o <= '0;
-	wb_err_o <= '0;
+       wb_req    <= '0;
+	   wb_dat_o <= '0;
+	   wb_ack_o <= '0;
+	   wb_err_o <= '0;
    end else begin
        wb_req   <= wb_stb_d3 && ((wb_ack_o == 0) && (wb_ack_o1 == 0)) ;
        wb_ack_o <= wb_ack_o1;
@@ -479,199 +441,58 @@
 // ---------------------------------------------------------------------
 assign reg_sel       = wb_req & (wb_adr_i[19] == 1'b1);
 
-assign sw_addr       = wb_adr_i [4:2];
-assign sw_rd_en      = reg_sel & !wb_we_i;
-assign sw_wr_en      = reg_sel & wb_we_i;
+wbh_reg  u_reg (
+               // System Signals
+               // Inputs
+		       .mclk               (wbm_clk_i      ),
+	           .e_reset_n          (e_reset_n      ),  // external reset
+	           .p_reset_n          (p_reset_n      ),  // power-on reset
+               .s_reset_n          (s_reset_n      ),  // soft reset
+               .int_pll_clock      (int_pll_clock  ),
 
-assign  sw_wr_en_0 = sw_wr_en && (sw_addr==0);
-assign  sw_wr_en_1 = sw_wr_en && (sw_addr==1);
-assign  sw_wr_en_2 = sw_wr_en && (sw_addr==2);
-assign  sw_wr_en_3 = sw_wr_en && (sw_addr==3);
-assign  sw_wr_en_4 = sw_wr_en && (sw_addr==4);
-assign  sw_wr_en_5 = sw_wr_en && (sw_addr==5);
+               .clk_enb            (clk_enb     ),
+               .force_refclk       (force_refclk   ),
+               .soft_reboot        (soft_reboot    ),
+	           .system_strap       (system_strap   ),
+	           .strap_sticky       (strap_sticky   ),
+      
+               .user_clock1        (user_clock1    ),
+               .user_clock2        (user_clock2    ),
+               .xtal_clk           (xtal_clk       ),
 
-always @ (posedge wbm_clk_i or negedge s_reset_n)
-begin : preg_out_Seq
-   if (s_reset_n == 1'b0)
-   begin
-      reg_rdata  <= 'h0;
-      reg_ack    <= 1'b0;
-   end
-   else if (sw_rd_en && !reg_ack) 
-   begin
-      reg_rdata <= reg_out ;
-      reg_ack   <= 1'b1;
-   end
-   else if (sw_wr_en && !reg_ack) 
-      reg_ack          <= 1'b1;
-   else
-   begin
-      reg_ack        <= 1'b0;
-   end
-end
+		       // Reg Bus Interface Signal
+               .reg_cs             (reg_sel        ),
+               .reg_wr             (wb_we_i        ),
+               .reg_addr           (wb_adr_i[4:2]  ),
+               .reg_wdata          (wb_dat_i       ),
+               .reg_be             (wb_sel_i       ),
+
+               // Outputs
+               .reg_rdata          (reg_rdata      ),
+               .reg_ack            (reg_ack        ),
 
 
-//-------------------------------------
-// Global + Clock Control
-// -------------------------------------
-assign cfg_glb_ctrl     = reg_0[31:0];
-// Reset control
-// On Power-up wb & pll power default enabled
-ctech_buf u_buf_wb_rst        (.A(cfg_glb_ctrl[0] & s_reset_n),.X(wbd_int_rst_n));
-ctech_buf u_buf_pll_rst       (.A(cfg_glb_ctrl[1] & s_reset_n),.X(wbd_pll_rst_n));
+               // Global Reset control
+               .wbd_int_rst_n      (wbd_int_rst_n  ),
+               .wbd_pll_rst_n      (wbd_pll_rst_n  ),
 
-//assign cfg_fast_sim        = cfg_glb_ctrl[8]; 
-ctech_clk_buf u_fastsim_buf (.A (cfg_glb_ctrl[8]), . X(cfg_fast_sim)); // To Bypass Reset FSM initial wait time
+               // CPU Clock and Reset
+               .cpu_clk            (cpu_clk        ),
 
-assign cfg_pll_enb         = cfg_glb_ctrl[15];
-assign cfg_ref_pll_div     = cfg_glb_ctrl[14:12];
-assign cfg_mon_sel         = cfg_glb_ctrl[11:8];
+               // WishBone Slave Clkout/in
+               .wbs_clk_out        (wbs_clk_out    ),  // System clock
 
+               .cfg_bank_sel       (cfg_bank_sel  ),
+               .cfg_clk_ctrl1      (cfg_clk_ctrl1  ),
 
-assign cfg_wb_clk_ctrl      = cfg_clk_ctrl2[3:0];
-assign cfg_cpu_clk_ctrl     = cfg_clk_ctrl2[7:4];
-
-
-always @( *)
-begin 
-  reg_out [31:0] = 8'd0;
-
-  case (sw_addr [1:0])
-    3'b000 :   reg_out [31:0] = reg_0;
-    3'b001 :   reg_out [31:0] = {16'h0,cfg_bank_sel [15:0]};     
-    3'b010 :   reg_out [31:0] = cfg_clk_ctrl1 [31:0];    
-    3'b011 :   reg_out [31:0] = {24'h0,cfg_clk_ctrl2 [7:0]};    
-    3'b100 :   reg_out [31:0] = cfg_pll_ctrl [31:0];     
-    3'b101 :   reg_out [31:0] = system_strap [31:0];     
-    default : reg_out [31:0] = 'h0;
-  endcase
-end
+               .cfg_fast_sim       (cfg_fast_sim   )
+    );
 
 
 
-generic_register #(32,32'h8003  ) u_glb_ctrl (
-	      .we            ({32{sw_wr_en_0}}   ),		 
-	      .data_in       (wb_dat_i[31:0]    ),
-	      .reset_n       (e_reset_n         ),
-	      .clk           (wbm_clk_i         ),
-	      
-	      //List of Outs
-	      .data_out      (reg_0[31:0])
-          );
-
-generic_register #(16,16'h1000 ) u_bank_sel (
-	      .we            ({16{sw_wr_en_1}}   ),		 
-	      .data_in       (wb_dat_i[15:0]    ),
-	      .reset_n       (e_reset_n         ),
-	      .clk           (wbm_clk_i         ),
-	      
-	      //List of Outs
-	      .data_out      (cfg_bank_sel[15:0] )
-          );
-
-//-----------------------------------------------
-// clock control-1
-//----------------------------------------------
-
-wire [31:0] rst_clk_ctrl1;
-
-assign rst_clk_ctrl1[3:0]   = (strap_sticky[`STRAP_CLK_SKEW_WI] == 2'b00) ?  SKEW_RESET_VAL[3:0] :
-                              (strap_sticky[`STRAP_CLK_SKEW_WI] == 2'b01) ?  SKEW_RESET_VAL[3:0] + 2 :
-                              (strap_sticky[`STRAP_CLK_SKEW_WI] == 2'b10) ?  SKEW_RESET_VAL[3:0] + 4 : SKEW_RESET_VAL[3:0]-4;
-
-assign rst_clk_ctrl1[7:4]   = (strap_sticky[`STRAP_CLK_SKEW_WH] == 2'b00) ?  SKEW_RESET_VAL[7:4]  :
-                              (strap_sticky[`STRAP_CLK_SKEW_WH] == 2'b01) ?  SKEW_RESET_VAL[7:4] + 2 :
-                              (strap_sticky[`STRAP_CLK_SKEW_WH] == 2'b10) ?  SKEW_RESET_VAL[7:4] + 4 : SKEW_RESET_VAL[7:4]-4;
-
-assign rst_clk_ctrl1[11:8]  = (strap_sticky[`STRAP_CLK_SKEW_RISCV] == 2'b00) ?  SKEW_RESET_VAL[11:8]  :
-                              (strap_sticky[`STRAP_CLK_SKEW_RISCV] == 2'b01) ?  SKEW_RESET_VAL[11:8] + 2 :
-                              (strap_sticky[`STRAP_CLK_SKEW_RISCV] == 2'b10) ?  SKEW_RESET_VAL[11:8] + 4 : SKEW_RESET_VAL[11:8]-4;
-
-assign rst_clk_ctrl1[15:12] = (strap_sticky[`STRAP_CLK_SKEW_QSPI] == 2'b00) ?  SKEW_RESET_VAL[15:12]  :
-                              (strap_sticky[`STRAP_CLK_SKEW_QSPI] == 2'b01) ?  SKEW_RESET_VAL[15:12] + 2 :
-                              (strap_sticky[`STRAP_CLK_SKEW_QSPI] == 2'b10) ?  SKEW_RESET_VAL[15:12] + 4 : SKEW_RESET_VAL[15:12]-4;
-
-assign rst_clk_ctrl1[19:16] = (strap_sticky[`STRAP_CLK_SKEW_UART] == 2'b00) ?  SKEW_RESET_VAL[19:16]  :
-                              (strap_sticky[`STRAP_CLK_SKEW_UART] == 2'b01) ?  SKEW_RESET_VAL[19:16] + 2 :
-                              (strap_sticky[`STRAP_CLK_SKEW_UART] == 2'b10) ?  SKEW_RESET_VAL[19:16] + 4 : SKEW_RESET_VAL[19:16]-4;
-
-assign rst_clk_ctrl1[23:20] = (strap_sticky[`STRAP_CLK_SKEW_PINMUX] == 2'b00) ?  SKEW_RESET_VAL[23:20]  :
-                              (strap_sticky[`STRAP_CLK_SKEW_PINMUX] == 2'b01) ?  SKEW_RESET_VAL[23:20] + 2 :
-                              (strap_sticky[`STRAP_CLK_SKEW_PINMUX] == 2'b10) ?  SKEW_RESET_VAL[23:20] + 4 : SKEW_RESET_VAL[23:20]-4;
-
-assign rst_clk_ctrl1[27:24] = (strap_sticky[`STRAP_CLK_SKEW_QSPI_CO] == 2'b00) ?  SKEW_RESET_VAL[27:24] :
-                              (strap_sticky[`STRAP_CLK_SKEW_QSPI_CO] == 2'b01) ?  SKEW_RESET_VAL[27:24] + 2 :
-                              (strap_sticky[`STRAP_CLK_SKEW_QSPI_CO] == 2'b10) ?  SKEW_RESET_VAL[27:24] + 4 : SKEW_RESET_VAL[27:24]-4;
-
-assign rst_clk_ctrl1[31:28] = 4'b0;
-
-
-always @ (posedge wbm_clk_i ) begin 
-  if (p_reset_n == 1'b0) begin
-     cfg_clk_ctrl1  <= rst_clk_ctrl1 ;
-  end
-  else begin 
-     if(sw_wr_en_2 ) 
-       cfg_clk_ctrl1   <= wb_dat_i[31:0];
-  end
-end
-
-//--------------------------------
-// clock control-2
-//--------------------------------
-always @ (posedge wbm_clk_i) begin 
-  if (p_reset_n == 1'b0) begin
-     cfg_clk_ctrl2  <= strap_sticky[7:0] ;
-  end
-  else begin 
-     if(sw_wr_en_3 ) 
-       cfg_clk_ctrl2   <= wb_dat_i[7:0];
-  end
-end
-//--------------------------------
-// Pll Control
-//--------------------------------
-// PLL clock : 199.680 Mhz Period: 5.008 & bcount: 7, period
-// cfg_dc_trim = 26'b0000000000000_1010101101001
-// cfg_pll_fed_div = 5'b00000
-// cfg_dco_mode    = 1'b1
-
-generic_register #(32,{1'b1,5'b00000,26'b0000000000000_1010101101001} ) u_pll_ctrl (
-	      .we            ({32{sw_wr_en_4}}  ),		 
-	      .data_in       (wb_dat_i[31:0]   ),
-	      .reset_n       (e_reset_n         ),
-	      .clk           (wbm_clk_i         ),
-	      
-	      //List of Outs
-	      .data_out      (cfg_pll_ctrl[31:0])
-          );
-
-
-always @ (posedge wbm_clk_i ) begin 
-  if (p_reset_n == 1'b0) begin
-     cfg_clk_ctrl2  <= strap_sticky[7:0] ;
-  end
-  else begin 
-     if(sw_wr_en_3 ) 
-       cfg_clk_ctrl2   <= wb_dat_i[7:0];
-  end
-end
-//-------------------------------------------------------------
-// Note: system_strap reset (p_reset_n) will be released
-//     eariler than s_reset_n to take care of strap loading
-//--------------------------------------------------------------
-always @ (posedge wbm_clk_i) begin 
-  if (s_reset_n == 1'b0) begin
-     system_strap  <= {soft_reboot,strap_sticky[30:0]};
-  end
-  else if(sw_wr_en_5 ) begin
-       system_strap   <= wb_dat_i;
-  end
-end
-
-
-//--------------------- End of Register Bank  ------------------------
-
+//-----------------------------------------------------------------
+//  Wishbone Slave Interface Logic starts here
+//-----------------------------------------------------------------
 
 assign wb_stb_int = wb_req & !reg_sel;
 
@@ -708,93 +529,4 @@
 
     );
 
-// PLL Ref CLock
-
-clk_ctl #(2) u_pll_ref_clk (
-   // Outputs
-       .clk_o         (pll_ref_clk      ),
-   // Inputs
-       .mclk          (user_clock1      ),
-       .reset_n       (e_reset_n        ), 
-       .clk_div_ratio (cfg_ref_pll_div  )
-   );
-
-// PLL DIv16 to debug monitor purpose
-
-clk_ctl #(3) u_pllclk (
-   // Outputs
-       .clk_o         (pll_clk_div16    ),
-   // Inputs
-       .mclk          (int_pll_clock    ),
-       .reset_n       (e_reset_n        ), 
-       .clk_div_ratio (4'hF )
-   );
-
-//----------------------------------
-// Generate Internal WishBone Clock
-//----------------------------------
-logic         wb_clk_div;
-logic         wbs_ref_clk_int;
-logic         wbs_ref_clk;
-
-wire  [1:0]   cfg_wb_clk_src_sel   =  cfg_wb_clk_ctrl[1:0];
-wire  [1:0]   cfg_wb_clk_ratio     =  cfg_wb_clk_ctrl[3:2];
-
- // Keep WBS in Ref clock during initial boot to strap loading 
-assign wbs_ref_clk_int = (cfg_wb_clk_src_sel ==2'b00) ? user_clock1 :
-                         (cfg_wb_clk_src_sel ==2'b01) ? user_clock2 :	
-                         (cfg_wb_clk_src_sel ==2'b10) ? int_pll_clock :	xtal_clk;
-
-ctech_clk_buf u_wbs_ref_clkbuf (.A (wbs_ref_clk_int), . X(wbs_ref_clk));
-ctech_clk_gate u_clkgate_wbs (.GATE (clk_enb), . CLK(wbs_clk_div), .GCLK(wbs_clk_out));
-
-assign wbs_clk_div   =(force_refclk)             ? user_clock1 :
-                      (cfg_wb_clk_ratio == 2'b00) ? wbs_ref_clk :
-                      (cfg_wb_clk_ratio == 2'b01) ? wbs_ref_clk_div_2 :
-                      (cfg_wb_clk_ratio == 2'b10) ? wbs_ref_clk_div_4 : wbs_ref_clk_div_8;
-
-clk_div8  u_wbclk (
-   // Outputs
-       .clk_div_8     (wbs_ref_clk_div_8      ),
-       .clk_div_4     (wbs_ref_clk_div_4      ),
-       .clk_div_2     (wbs_ref_clk_div_2      ),
-   // Inputs
-       .mclk          (wbs_ref_clk            ),
-       .reset_n       (p_reset_n              ) 
-   );
-
-
-//----------------------------------
-// Generate CORE Clock Generation
-//----------------------------------
-wire   cpu_clk_div;
-wire   cpu_ref_clk_int;
-wire   cpu_ref_clk;
-wire   cpu_clk_int;
-
-wire [1:0] cfg_cpu_clk_src_sel   = cfg_cpu_clk_ctrl[1:0];
-wire [1:0] cfg_cpu_clk_ratio     = cfg_cpu_clk_ctrl[3:2];
-
-assign cpu_ref_clk_int = (cfg_cpu_clk_src_sel ==2'b00) ? user_clock1 :
-                         (cfg_cpu_clk_src_sel ==2'b01) ? user_clock2 :	
-                         (cfg_cpu_clk_src_sel ==2'b10) ? int_pll_clock : xtal_clk;	
-
-ctech_clk_buf u_cpu_ref_clkbuf (.A (cpu_ref_clk_int), . X(cpu_ref_clk));
-
-ctech_clk_gate u_clkgate_cpu (.GATE (clk_enb), . CLK(cpu_clk_div), .GCLK(cpu_clk));
-
-assign cpu_clk_div   = (cfg_wb_clk_ratio == 2'b00) ? cpu_ref_clk :
-                       (cfg_wb_clk_ratio == 2'b01) ? cpu_ref_clk_div_2 :
-                       (cfg_wb_clk_ratio == 2'b10) ? cpu_ref_clk_div_4 : cpu_ref_clk_div_8;
-
-
-clk_div8 u_cpuclk (
-   // Outputs
-       .clk_div_8     (cpu_ref_clk_div_8      ),
-       .clk_div_4     (cpu_ref_clk_div_4      ),
-       .clk_div_2     (cpu_ref_clk_div_2      ),
-   // Inputs
-       .mclk          (cpu_ref_clk            ),
-       .reset_n       (p_reset_n              )
-   );
 endmodule
diff --git a/verilog/rtl/wb_host/src/wbh_reg.sv b/verilog/rtl/wb_host/src/wbh_reg.sv
new file mode 100644
index 0000000..5985135
--- /dev/null
+++ b/verilog/rtl/wb_host/src/wbh_reg.sv
@@ -0,0 +1,337 @@
+//////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya                          
+// 
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Created by Dinesh Annayya <dinesh.annayya@gmail.com>
+//
+//////////////////////////////////////////////////////////////////////
+
+`include "user_params.svh"
+module wbh_reg  (
+                       // System Signals
+                       // Inputs
+		               input logic           mclk               ,
+	                   input logic          e_reset_n          ,  // external reset
+	                   input logic          p_reset_n          ,  // power-on reset
+                       input logic          s_reset_n          ,  // soft reset
+                       input logic          int_pll_clock      ,
+
+                       input   logic         clk_enb            ,
+                       input   logic         force_refclk       ,
+                       input   logic         soft_reboot        ,
+	                   output  logic [31:0]  system_strap       ,
+	                   input   logic [31:0]  strap_sticky       ,
+      
+                       input logic           user_clock1        ,
+                       input logic           user_clock2        ,
+                       input   logic         xtal_clk           ,
+
+		               // Reg Bus Interface Signal
+                       input logic           reg_cs             ,
+                       input logic           reg_wr             ,
+                       input logic [2:0]     reg_addr           ,
+                       input logic [31:0]    reg_wdata          ,
+                       input logic [3:0]     reg_be             ,
+
+                       // Outputs
+                       output logic [31:0]   reg_rdata          ,
+                       output logic          reg_ack            ,
+
+
+                       // Global Reset control
+                       output logic          wbd_int_rst_n      ,
+                       output logic          wbd_pll_rst_n      ,
+
+                       // CPU Clock and Reset
+                       output logic          cpu_clk            ,
+
+                       // WishBone Slave Clkout/in
+                       output  logic         wbs_clk_out        ,  // System clock
+
+              
+                       output  logic [15:0]  cfg_bank_sel       ,
+                       output logic [31:0]   cfg_clk_ctrl1      ,
+
+                       output logic          cfg_fast_sim       
+    );
+
+logic [2:0]         sw_addr               ;
+logic               sw_rd_en              ;
+logic               sw_wr_en              ;
+logic               sw_wr_en_0            ;
+logic               sw_wr_en_1            ;
+logic               sw_wr_en_2            ;
+logic               sw_wr_en_3            ;
+logic               sw_wr_en_4            ;
+logic               sw_wr_en_5            ;
+logic [31:0]        reg_out               ;
+
+logic [31:0]        reg_0                 ;  // Software_Reg_0
+logic [7:0]         cfg_clk_ctrl2         ;
+logic  [3:0]        cfg_wb_clk_ctrl       ;
+logic  [3:0]        cfg_cpu_clk_ctrl      ;
+logic  [31:0]       cfg_glb_ctrl          ;
+logic               wbs_clk_div           ;
+logic               wbs_ref_clk_div_2     ;
+logic               wbs_ref_clk_div_4     ;
+logic               wbs_ref_clk_div_8     ;
+
+
+assign  sw_addr       = reg_addr ;
+assign  sw_rd_en      = reg_cs & !reg_wr;
+assign  sw_wr_en      = reg_cs & reg_wr;
+
+assign  sw_wr_en_0 = sw_wr_en && (sw_addr==0);
+assign  sw_wr_en_1 = sw_wr_en && (sw_addr==1);
+assign  sw_wr_en_2 = sw_wr_en && (sw_addr==2);
+assign  sw_wr_en_3 = sw_wr_en && (sw_addr==3);
+assign  sw_wr_en_4 = sw_wr_en && (sw_addr==4);
+assign  sw_wr_en_5 = sw_wr_en && (sw_addr==5);
+
+always @ (posedge mclk or negedge p_reset_n)
+begin : preg_out_Seq
+   if (p_reset_n == 1'b0)
+   begin
+      reg_rdata  <= 'h0;
+      reg_ack    <= 1'b0;
+   end
+   else if (sw_rd_en && !reg_ack) 
+   begin
+      reg_rdata <= reg_out ;
+      reg_ack   <= 1'b1;
+   end
+   else if (sw_wr_en && !reg_ack) 
+      reg_ack          <= 1'b1;
+   else
+   begin
+      reg_ack        <= 1'b0;
+   end
+end
+
+
+//-------------------------------------
+// Global + Clock Control
+// -------------------------------------
+assign cfg_glb_ctrl     = reg_0[31:0];
+// Reset control
+// On Power-up wb & pll power default enabled
+ctech_buf u_buf_wb_rst        (.A(cfg_glb_ctrl[0] & s_reset_n),.X(wbd_int_rst_n));
+// Change to p_reset to avoid pll reset on every system reset
+ctech_buf u_buf_pll_rst       (.A(cfg_glb_ctrl[1] & p_reset_n),.X(wbd_pll_rst_n)); 
+
+//assign cfg_fast_sim        = cfg_glb_ctrl[8]; 
+ctech_clk_buf u_fastsim_buf (.A (cfg_glb_ctrl[8]), . X(cfg_fast_sim)); // To Bypass Reset FSM initial wait time
+
+
+assign cfg_wb_clk_ctrl      = cfg_clk_ctrl2[3:0];
+assign cfg_cpu_clk_ctrl     = cfg_clk_ctrl2[7:4];
+
+
+always @( *)
+begin 
+  reg_out [31:0] = 'h0;
+
+  case (sw_addr [2:0])
+    3'b000 :   reg_out [31:0] = reg_0;
+    3'b001 :   reg_out [31:0] = {16'h0,cfg_bank_sel [15:0]};     
+    3'b010 :   reg_out [31:0] = cfg_clk_ctrl1 [31:0];    
+    3'b011 :   reg_out [31:0] = {24'h0,cfg_clk_ctrl2 [7:0]};    
+    3'b101 :   reg_out [31:0] = system_strap [31:0];     
+    default : reg_out [31:0] = 'h0;
+  endcase
+end
+
+
+
+generic_register #(32,32'h3  ) u_glb_ctrl (
+	      .we            ({32{sw_wr_en_0}}   ),		 
+	      .data_in       (reg_wdata[31:0]    ),
+	      .reset_n       (e_reset_n         ),
+	      .clk           (mclk         ),
+	      
+	      //List of Outs
+	      .data_out      (reg_0[31:0])
+          );
+
+generic_register #(16,16'h1000 ) u_bank_sel (
+	      .we            ({16{sw_wr_en_1}}   ),		 
+	      .data_in       (reg_wdata[15:0]    ),
+	      .reset_n       (e_reset_n         ),
+	      .clk           (mclk         ),
+	      
+	      //List of Outs
+	      .data_out      (cfg_bank_sel[15:0] )
+          );
+
+//-----------------------------------------------
+// clock control-1
+//----------------------------------------------
+
+wire [31:0] rst_clk_ctrl1;
+
+assign rst_clk_ctrl1[3:0]   = (strap_sticky[`STRAP_CLK_SKEW_WI] == 2'b00) ?  SKEW_RESET_VAL[3:0] :
+                              (strap_sticky[`STRAP_CLK_SKEW_WI] == 2'b01) ?  SKEW_RESET_VAL[3:0] + 2 :
+                              (strap_sticky[`STRAP_CLK_SKEW_WI] == 2'b10) ?  SKEW_RESET_VAL[3:0] + 4 : SKEW_RESET_VAL[3:0]-4;
+
+assign rst_clk_ctrl1[7:4]   = (strap_sticky[`STRAP_CLK_SKEW_WH] == 2'b00) ?  SKEW_RESET_VAL[7:4]  :
+                              (strap_sticky[`STRAP_CLK_SKEW_WH] == 2'b01) ?  SKEW_RESET_VAL[7:4] + 2 :
+                              (strap_sticky[`STRAP_CLK_SKEW_WH] == 2'b10) ?  SKEW_RESET_VAL[7:4] + 4 : SKEW_RESET_VAL[7:4]-4;
+
+assign rst_clk_ctrl1[11:8]  = (strap_sticky[`STRAP_CLK_SKEW_RISCV] == 2'b00) ?  SKEW_RESET_VAL[11:8]  :
+                              (strap_sticky[`STRAP_CLK_SKEW_RISCV] == 2'b01) ?  SKEW_RESET_VAL[11:8] + 2 :
+                              (strap_sticky[`STRAP_CLK_SKEW_RISCV] == 2'b10) ?  SKEW_RESET_VAL[11:8] + 4 : SKEW_RESET_VAL[11:8]-4;
+
+assign rst_clk_ctrl1[15:12] = (strap_sticky[`STRAP_CLK_SKEW_QSPI] == 2'b00) ?  SKEW_RESET_VAL[15:12]  :
+                              (strap_sticky[`STRAP_CLK_SKEW_QSPI] == 2'b01) ?  SKEW_RESET_VAL[15:12] + 2 :
+                              (strap_sticky[`STRAP_CLK_SKEW_QSPI] == 2'b10) ?  SKEW_RESET_VAL[15:12] + 4 : SKEW_RESET_VAL[15:12]-4;
+
+assign rst_clk_ctrl1[19:16] = (strap_sticky[`STRAP_CLK_SKEW_UART] == 2'b00) ?  SKEW_RESET_VAL[19:16]  :
+                              (strap_sticky[`STRAP_CLK_SKEW_UART] == 2'b01) ?  SKEW_RESET_VAL[19:16] + 2 :
+                              (strap_sticky[`STRAP_CLK_SKEW_UART] == 2'b10) ?  SKEW_RESET_VAL[19:16] + 4 : SKEW_RESET_VAL[19:16]-4;
+
+assign rst_clk_ctrl1[23:20] = (strap_sticky[`STRAP_CLK_SKEW_PINMUX] == 2'b00) ?  SKEW_RESET_VAL[23:20]  :
+                              (strap_sticky[`STRAP_CLK_SKEW_PINMUX] == 2'b01) ?  SKEW_RESET_VAL[23:20] + 2 :
+                              (strap_sticky[`STRAP_CLK_SKEW_PINMUX] == 2'b10) ?  SKEW_RESET_VAL[23:20] + 4 : SKEW_RESET_VAL[23:20]-4;
+
+assign rst_clk_ctrl1[27:24] = (strap_sticky[`STRAP_CLK_SKEW_QSPI_CO] == 2'b00) ?  SKEW_RESET_VAL[27:24] :
+                              (strap_sticky[`STRAP_CLK_SKEW_QSPI_CO] == 2'b01) ?  SKEW_RESET_VAL[27:24] + 2 :
+                              (strap_sticky[`STRAP_CLK_SKEW_QSPI_CO] == 2'b10) ?  SKEW_RESET_VAL[27:24] + 4 : SKEW_RESET_VAL[27:24]-4;
+
+assign rst_clk_ctrl1[31:28] = 4'b0;
+
+
+always @ (posedge mclk ) begin 
+  if (p_reset_n == 1'b0) begin
+     cfg_clk_ctrl1  <= rst_clk_ctrl1 ;
+  end
+  else begin 
+     if(sw_wr_en_2 ) 
+       cfg_clk_ctrl1   <= reg_wdata[31:0];
+  end
+end
+
+//--------------------------------
+// clock control-2
+//--------------------------------
+always @ (posedge mclk) begin 
+  if (p_reset_n == 1'b0) begin
+     cfg_clk_ctrl2  <= strap_sticky[7:0] ;
+  end
+  else begin 
+     if(sw_wr_en_3 ) 
+       cfg_clk_ctrl2   <= reg_wdata[7:0];
+  end
+end
+
+
+always @ (posedge mclk ) begin 
+  if (p_reset_n == 1'b0) begin
+     cfg_clk_ctrl2  <= strap_sticky[7:0] ;
+  end
+  else begin 
+     if(sw_wr_en_3 ) 
+       cfg_clk_ctrl2   <= reg_wdata[7:0];
+  end
+end
+//-------------------------------------------------------------
+// Note: system_strap reset (p_reset_n) will be released
+//     eariler than s_reset_n to take care of strap loading
+//--------------------------------------------------------------
+always @ (posedge mclk) begin 
+  if (s_reset_n == 1'b0) begin
+     system_strap  <= {soft_reboot,strap_sticky[30:0]};
+  end
+  else if(sw_wr_en_5 ) begin
+       system_strap   <= reg_wdata;
+  end
+end
+
+
+
+//----------------------------------
+// Generate Internal WishBone Clock
+//----------------------------------
+logic         wb_clk_div;
+logic         wbs_ref_clk_int;
+logic         wbs_ref_clk;
+
+wire  [1:0]   cfg_wb_clk_src_sel   =  cfg_wb_clk_ctrl[1:0];
+wire  [1:0]   cfg_wb_clk_ratio     =  cfg_wb_clk_ctrl[3:2];
+
+ // Keep WBS in Ref clock during initial boot to strap loading 
+assign wbs_ref_clk_int = (cfg_wb_clk_src_sel ==2'b00) ? user_clock1 :
+                         (cfg_wb_clk_src_sel ==2'b01) ? user_clock2 :	
+                         (cfg_wb_clk_src_sel ==2'b10) ? int_pll_clock :	xtal_clk;
+
+ctech_clk_buf u_wbs_ref_clkbuf (.A (wbs_ref_clk_int), . X(wbs_ref_clk));
+ctech_clk_gate u_clkgate_wbs (.GATE (clk_enb), . CLK(wbs_clk_div), .GCLK(wbs_clk_out));
+
+assign wbs_clk_div   =(force_refclk)             ? user_clock1 :
+                      (cfg_wb_clk_ratio == 2'b00) ? wbs_ref_clk :
+                      (cfg_wb_clk_ratio == 2'b01) ? wbs_ref_clk_div_2 :
+                      (cfg_wb_clk_ratio == 2'b10) ? wbs_ref_clk_div_4 : wbs_ref_clk_div_8;
+
+clk_div8  u_wbclk (
+   // Outputs
+       .clk_div_8     (wbs_ref_clk_div_8      ),
+       .clk_div_4     (wbs_ref_clk_div_4      ),
+       .clk_div_2     (wbs_ref_clk_div_2      ),
+   // Inputs
+       .mclk          (wbs_ref_clk            ),
+       .reset_n       (p_reset_n              ) 
+   );
+
+
+//----------------------------------
+// Generate CORE Clock Generation
+//----------------------------------
+wire   cpu_clk_div;
+wire   cpu_ref_clk_int;
+wire   cpu_ref_clk;
+wire   cpu_clk_int;
+wire   cpu_ref_clk_div_2;
+wire   cpu_ref_clk_div_4;
+wire   cpu_ref_clk_div_8;
+
+wire [1:0] cfg_cpu_clk_src_sel   = cfg_cpu_clk_ctrl[1:0];
+wire [1:0] cfg_cpu_clk_ratio     = cfg_cpu_clk_ctrl[3:2];
+
+assign cpu_ref_clk_int = (cfg_cpu_clk_src_sel ==2'b00) ? user_clock1 :
+                         (cfg_cpu_clk_src_sel ==2'b01) ? user_clock2 :	
+                         (cfg_cpu_clk_src_sel ==2'b10) ? int_pll_clock : xtal_clk;	
+
+ctech_clk_buf u_cpu_ref_clkbuf (.A (cpu_ref_clk_int), . X(cpu_ref_clk));
+
+ctech_clk_gate u_clkgate_cpu (.GATE (clk_enb), . CLK(cpu_clk_div), .GCLK(cpu_clk));
+
+assign cpu_clk_div   = (cfg_wb_clk_ratio == 2'b00) ? cpu_ref_clk :
+                       (cfg_wb_clk_ratio == 2'b01) ? cpu_ref_clk_div_2 :
+                       (cfg_wb_clk_ratio == 2'b10) ? cpu_ref_clk_div_4 : cpu_ref_clk_div_8;
+
+
+clk_div8 u_cpuclk (
+   // Outputs
+       .clk_div_8     (cpu_ref_clk_div_8      ),
+       .clk_div_4     (cpu_ref_clk_div_4      ),
+       .clk_div_2     (cpu_ref_clk_div_2      ),
+   // Inputs
+       .mclk          (cpu_ref_clk            ),
+       .reset_n       (p_reset_n              )
+   );
+
+
+
+
+
+endmodule
diff --git a/verilog/rtl/wb_host/src/wb_reset_fsm.sv b/verilog/rtl/wb_host/src/wbh_reset_fsm.sv
similarity index 83%
rename from verilog/rtl/wb_host/src/wb_reset_fsm.sv
rename to verilog/rtl/wb_host/src/wbh_reset_fsm.sv
index 23fd015..9a53d75 100644
--- a/verilog/rtl/wb_host/src/wb_reset_fsm.sv
+++ b/verilog/rtl/wb_host/src/wbh_reset_fsm.sv
@@ -1,4 +1,21 @@
-
+//////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya                          
+// 
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Created by Dinesh Annayya <dinesh.annayya@gmail.com>
+//
+//////////////////////////////////////////////////////////////////////
 /*************************************************************************
   This block control the reset sequence
 
@@ -23,7 +40,7 @@
 
 ************************************************************************************************************/
 
-module wb_reset_fsm (
+module wbh_reset_fsm (
 	      input  logic    clk                 ,
 	      input  logic    e_reset_n           ,  // external reset
           input  logic    cfg_fast_sim        ,
@@ -135,6 +152,7 @@
                    clk_cnt   <= clk_cnt + 1;
                 end
              end
+        default : state         <= FSM_POWER_UP;
 
       endcase
 
diff --git a/verilog/rtl/wb_interconnect/src/wb_arb.sv b/verilog/rtl/wb_interconnect/src/wb_arb.sv
index aefac4a..a67047b 100644
--- a/verilog/rtl/wb_interconnect/src/wb_arb.sv
+++ b/verilog/rtl/wb_interconnect/src/wb_arb.sv
@@ -78,10 +78,10 @@
 
 
 parameter	[1:0]
-                grant0 = 3'h0,
-                grant1 = 3'h1,
-                grant2 = 3'h2,
-                grant3 = 3'h3;
+                grant0 = 2'h0,
+                grant1 = 2'h1,
+                grant2 = 2'h2,
+                grant3 = 2'h3;
 
 ///////////////////////////////////////////////////////////////////////
 // Local Registers and Wires