| #include <Arduino.h> |
| #define uint32_t long |
| |
| #define reg_mprj_globl_reg0 (*(volatile uint32_t*)0x10020000) // Chip ID |
| #define reg_mprj_globl_reg1 (*(volatile uint32_t*)0x10020004) // Global Config-0 |
| #define reg_mprj_globl_reg2 (*(volatile uint32_t*)0x10020008) // Global Config-1 |
| #define reg_mprj_globl_reg3 (*(volatile uint32_t*)0x1002000C) // Global Interrupt Mask |
| #define reg_mprj_globl_reg4 (*(volatile uint32_t*)0x10020010) // Global Interrupt |
| #define reg_mprj_globl_reg5 (*(volatile uint32_t*)0x10020014) // Multi functional sel |
| #define reg_mprj_globl_soft0 (*(volatile uint32_t*)0x10020018) // Sof Register-0 |
| #define reg_mprj_globl_soft1 (*(volatile uint32_t*)0x1002001C) // Sof Register-1 |
| #define reg_mprj_globl_soft2 (*(volatile uint32_t*)0x10020020) // Sof Register-2 |
| #define reg_mprj_globl_soft3 (*(volatile uint32_t*)0x10020024) // Sof Register-3 |
| #define reg_mprj_globl_soft4 (*(volatile uint32_t*)0x10020028) // Sof Register-4 |
| #define reg_mprj_globl_soft5 (*(volatile uint32_t*)0x1002002C) // Sof Register-5 |
| |
| |
| |
| void setup(); |
| void loop(); |
| void setup() { |
| // put your setup code here, to run once: |
| reg_mprj_globl_soft0 = 0x11223344; |
| reg_mprj_globl_soft1 = 0x22334455; |
| reg_mprj_globl_soft2 = 0x33445566; |
| reg_mprj_globl_soft3 = 0x44556677; |
| reg_mprj_globl_soft4 = 0x55667788; |
| reg_mprj_globl_soft5 = 0x66778899; |
| |
| } |
| |
| void loop() { |
| // put your main code here, to run repeatedly: |
| |
| } |
| |
