| #include <Arduino.h> |
| #line 1 "/tmp/.arduinoIDE-unsaved202266-51666-8e7jjt.yj22m/MultiSerial/MultiSerial.ino" |
| /* |
| Multiple Serial test |
| |
| Receives from the main serial port, sends to the others. |
| Receives from serial port 1, sends to the main serial (Serial 0). |
| |
| This example works only with boards with more than one serial like Arduino Mega, Due, Zero etc. |
| |
| The circuit: |
| - any serial device attached to Serial port 1 |
| - Serial Monitor open on Serial port 0 |
| |
| created 30 Dec 2008 |
| modified 20 May 2012 |
| by Tom Igoe & Jed Roach |
| modified 27 Nov 2015 |
| by Arturo Guadalupi |
| |
| This example code is in the public domain. |
| |
| https://www.arduino.cc/en/Tutorial/BuiltInExamples/MultiSerialMega |
| */ |
| |
| |
| #line 25 "/tmp/.arduinoIDE-unsaved202266-51666-8e7jjt.yj22m/MultiSerial/MultiSerial.ino" |
| void setup(); |
| #line 31 "/tmp/.arduinoIDE-unsaved202266-51666-8e7jjt.yj22m/MultiSerial/MultiSerial.ino" |
| void loop(); |
| #line 25 "/tmp/.arduinoIDE-unsaved202266-51666-8e7jjt.yj22m/MultiSerial/MultiSerial.ino" |
| void setup() { |
| // initialize both serial ports: |
| Serial.begin(288000); |
| Serial1.begin(288000); |
| } |
| |
| void loop() { |
| // read from port 1, send to port 0: |
| if (Serial1.available()) { |
| int inByte = Serial1.read(); |
| Serial.write(inByte); |
| } |
| |
| // read from port 0, send to port 1: |
| if (Serial.available()) { |
| int inByte = Serial.read(); |
| Serial1.write(inByte); |
| } |
| } |
| |