diff --git a/.gitmodules b/.gitmodules
index 57ae809..916c6dd 100644
--- a/.gitmodules
+++ b/.gitmodules
@@ -4,3 +4,6 @@
 [submodule "verilog/rtl/qspim"]
 	path = verilog/rtl/qspim
 	url = https://github.com/dineshannayya/qspim.git
+[submodule "verilog/dv/common/riscduino_board"]
+	path = verilog/dv/common/riscduino_board
+	url = https://github.com/dineshannayya/riscduino_board.git
diff --git a/README.md b/README.md
index e8233a8..34bdf01 100644
--- a/README.md
+++ b/README.md
@@ -580,81 +580,135 @@
    sudo usermod -aG docker <your user name>
    # Reboot the system to enable the docker setup
 ```
-##  Step-2: Update the Submodule, To to project area
+##  Step-2: Clone , update the Submodule, unzip the content
 ```bash
+   git clone https://github.com/dineshannayya/riscduino.git
+   cd riscduino
    git submodule init
    git submodule update
-```
-## Step-3: clone Openlane scripts under workarea
-```bash
-   git clone https://github.com/The-OpenROAD-Project/OpenLane.git
+   make unzip
 ```
 
-## Step-4: add Environment setting
+## Note-1: RTL to GDS Docker
+    - Required openlane and pdk are moved inside the riscduino docker to avoid the external dependency. 
+    - flow automatically pull the required docker based on MPW version.
+    - RTL to gds docker is hardcoded inside File: openlane/Makefile
 ```bash
-    export CARAVEL_ROOT=<Carvel Installed Path>
-    export OPENLANE_ROOT=<OpenLane Installed Path>
-    export OPENLANE_IMAGE_NAME=efabless/openlane:latest
-    export PDK_ROOT=<PDK Installed PATH>
-    export PDK_PATH=<PDK Install Path>/sky130A
+     OPENLANE_TAG = mpw6
+     OPENLANE_IMAGE_NAME = riscduino/openlane:$(OPENLANE_TAG)
 ```
-## Step-5: To install the PDK
+## Note-1.1: View the RTL to GDS Docker content
+    - for MPW-6 caravel pdk and openlane avaible inside riscduino/openlane:mpw6 docker 
+    - caravel, openlane and pdk envionment are automatically pointed to internal docker pointer
+    - To view the docker contents
 ```bash
-   source ~/.bashrc
-   cd OpenLane
-   make pdk
+    docker run -ti --rm riscduino/openlane:mpw6  bash
+    cd /opt/pdk_mpw6     -  pdk folder
+    cd /opt/caravel      -  caravel folder 
+    cd /openlane         -  openlane folder
+    env   - Show the internally defined env's
+        CARAVEL_ROOT=/opt/caravel
+        PDK_ROOT=/opt/pdk_mpw6
+```
+
+## Note-2: RTL Simulation Docker
+    - Required caravel and pdk are moved inside the riscduino docker to avoid the external dependency. 
+    - flow automatically pull the required docker based on MPW version.
+    - To view the docker contents
+    - RTL simulation docker hardcoded inside File: Makefile
+        simenv:
+	    docker pull riscduino/dv_setup:mpw6
+
+## Note-2.1: View the RTL Simulation Docker content
+    - for MPW-6 caravel and pdk avaible inside riscduino/dv_setup:mpw6 docker this is used for RTL to gds flows
+    - caravel and pdk envionment are automatically pointed to internal docker pointer
+    - To view the docker contents
+```bash
+    docker run -ti --rm riscduino/dv_setup:mpw6  bash
+    cd /opt/pdk_mpw6     -  pdk folder
+    cd /opt/caravel      -  caravel folder 
+    env   - Show the internally defined env's
+        CARAVEL_ROOT=/opt/caravel
+        PDK_ROOT=/opt/pdk_mpw6
 ```
 
 # Tests preparation
 
 The simulation package includes the following tests:
 
-* **risc_boot**           - Simple User Risc core boot 
-* **wb_port**             - User Wishbone validation
+* **risc_boot**           - Complete caravel User Risc core boot 
+* **wb_port**             - Complete caravel User Wishbone validation
+* **uart_master**         - complete caravel user uart master test
 * **user_risc_boot**      - Standalone User Risc core boot
-* **user_mbist_test1**    - Standalone MBIST test
+* **user_sspi**           - Standalone SSPI test
+* **user_qspi**           - Standalone Quad SPI test
 * **user_spi**            - Standalone SPI test
 * **user_i2c**            - Standalone I2C test
-* **user_risc_soft_boot** - Standalone Risc with SRAM as Boot
+* **user_usb**            - Standalone USB Host test
+* **user_risc_boot**      - Standalone Risc Boot test
+* **user_uart**           - Standalone Risc with UART-0 Test
+* **user_uart1**          - Standalone Risc with UART-1 Test
+* **user_gpio**           - Standalone GPIO Test
+* **user_pwm**            - Standalone pwm Test
+* **user_timer**          - Standalone timer Test
+* **user_uart_master**    - Standalone uart master test
+* **riscv_regress**       - Standalone riscv compliance and regression test suite
+
 
 
 # Running Simulation
 
 Examples:
 ``` sh
-    make verify-wb_port  
-    make verify-risc_boot
-    make verify-uart_master
-    make verify-user_basic
-    make verify-user_uart
-    make verify-user_uart1
-    make verify-user_sspi
-    make verify-user_i2cm
-    make verify-user_risc_boot
-    make verify-user_pwm
-    make verify-user_timer
-    make verify-user_sspi
-    make verify-user_qspi
-    make verify-user_usb
-    make verify-user_uart_master
-    make verify-wb_port SIM=RTL DUMP=OFF
-    make verify-wb_port SIM=RTL DUMP=ON
-    make verify-riscv_regress
-    make verify-wb_port  SIM=GL
-    make verify-risc_boot SIM=GL
-    make verify-uart_master SIM=GL
-    make verify-user_basic SIM=GL
-    make verify-user_uart SIM=GL
-    make verify-user_uart1 SIM=GL
-    make verify-user_sspi SIM=GL
-    make verify-user_i2cm SIM=GL
-    make verify-user_risc_boot SIM=GL
-    make verify-user_pwm SIM=GL
-    make verify-user_timer SIM=GL
-    make verify-user_sspi SIM=GL
-    make verify-user_qspi SIM=GL
-    make verify-user_usb SIM=GL
-    make verify-user_uart_master
+    make verify-wb_port                        - User Wishbone Test from caravel
+    make verify-risc_boot                      - User Risc core test from caravel
+    make verify-uart_master                    - User uart master test from caravel
+    make verify-user_basic                     - Standalone Basic signal and clock divider test
+    make verify-user_uart                      - Standalone user uart-0 test using user risc core
+    make verify-user_uart1                     - Standalone user uart-0 test using user risc core
+    make verify-user_i2cm                      - Standalone user i2c test
+    make verify-user_risc_boot                 - standalone user risc core-0 boot test
+    make verify-user_pwm                       - standalone user pwm test
+    make verify-user_timer                     - standalone user timer test
+    make verify-user_sspi                      - standalone user spi test
+    make verify-user_qspi                      - standalone user quad spi test
+    make verify-user_usb                       - standalone user usb host test
+    make verify-user_gpio                      - standalone user gpio test
+    make verify-user_aes                       - standalone aes test with risc core-0
+    make verify-user_cache_bypass              - standalone icache and dcache bypass test with risc core-0
+    make verify-user_uart_master               - standalone user uart master test
+    make verify-user_sram_exec                 - standalone riscv core-0 test with executing code from data memory
+    make verify-riscv_regress                  - standalone riscv compliance test suite
+    make verify-arudino_risc_boot              - standalone riscv core-0 boot using arduino tool set
+    make verify-user_mcore                     - standalone riscv multi-core test
+    make verify-user_sram_exec RISC_CORE=1     - standalone riscv core-1 test with executing code from data memory
+    make verify-user_risc_boot RISC_CORE=1     - standalone user risc core-1 boot test
+    make verify-user_uart RISC_CORE=1          - Standalone user uart test using user risc core-1
+    make verify-user_uart1 RISC_CORE=1         - Standalone user uart test using user risc core-1
+    make verify-user_aes  RISC_CORE=1          - standalone aes test with risc core-1
+    make verify-user_cache_bypass RISC_CORE=1  - standalone icache and dcache bypass test with risc core-1
+    make verify-arudino_risc_boot RISC_CORE=1  - standalone riscv core-1 boot using arduino tool set
+    
+    make verify-user_uart SIM=RTL DUMP=OFF     - Standalone user uart-0 test using user risc core with waveform dump off
+    make verify-user_uart SIM=RTL DUMP=ON      - Standalone user uart-0 test using user risc core with waveform dump on
+    make verify-user_uart SIM=GL DUMP=OFF      - Standalone user uart-0 test using user risc core with gatelevel netlist
+    make verify-user_uart SIM=GL DUMP=ON       - Standalone user uart-0 test using user risc core with gatelevel netlist and waveform on
+
+```
+# Running RTL to GDS flows
+   - First run the individual macro file
+   - Last run the user_project_wrapper
+``` sh
+   cd openlane
+   make pinmux
+   make qspim_top
+   make uart_i2cm_usb_spi_top
+   make wb_host
+   make wb_interconnect
+   make ycr_intf
+   make ycr_core_top
+   make ycr_iconnect
+   make user_project_wrapper
 ```
 
 # Tool Sets
@@ -691,6 +745,11 @@
     3. `Netgen` - Performs LVS Checks
     4. `CVC` - Performs Circuit Validity Checks
 
+# Riscduino documentation
+    Riscduino documentation available at <https://riscduino.readthedocs.io/en/latest/>
+
+# Arduino ide integration
+    We are in initial phase of Riscduino board integration into arduino and integration details are available at <https://github.com/dineshannayya/riscduino_board/>
 
 # News
 * **Riscduino Aim** - https://www.youtube.com/watch?v=lFVnicPhTI0
diff --git a/verilog/dv/arudino_risc_boot/Makefile b/verilog/dv/arudino_risc_boot/Makefile
new file mode 100644
index 0000000..6e6738d
--- /dev/null
+++ b/verilog/dv/arudino_risc_boot/Makefile
@@ -0,0 +1,141 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+ 
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv64i/
+
+export USER_PROJECT_VERILOG ?=  $(DESIGNS)/verilog
+export RISCDUINO_BOARD ?=  $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC64_PREFIX?=riscv64-unknown-elf
+GCC32_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arudino_risc_boot
+
+all:  ${PATTERN:=.vcd}
+
+
+vvp:  ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+	${GCC32_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+	${GCC32_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+	${GCC32_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+	${GCC32_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+	${GCC32_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=65000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+	${GCC32_PREFIX}-ar rcs core.a Print.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a UARTClass.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a WInterrupts.c.o
+	${GCC32_PREFIX}-ar rcs core.a WMath.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a WString.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a abi.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+	${GCC32_PREFIX}-ar rcs core.a plic_driver.c.o
+	${GCC32_PREFIX}-ar rcs core.a entry.S.o
+	${GCC32_PREFIX}-ar rcs core.a hooks.c.o
+	${GCC32_PREFIX}-ar rcs core.a init.S.o
+	${GCC32_PREFIX}-ar rcs core.a itoa.c.o
+	${GCC32_PREFIX}-ar rcs core.a main.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a malloc.c.o
+	${GCC32_PREFIX}-ar rcs core.a new.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a sbrk.c.o
+	${GCC32_PREFIX}-ar rcs core.a start.S.o
+	${GCC32_PREFIX}-ar rcs core.a wiring.c.o
+	${GCC32_PREFIX}-ar rcs core.a wiring_analog.c.o
+	${GCC32_PREFIX}-ar rcs core.a wiring_digital.c.o
+	${GCC32_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+	${GCC32_PREFIX}-ar rcs core.a wiring_shift.c.o
+	${GCC32_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
+	${GCC32_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
+	${GCC32_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
+	${GCC32_PREFIX}-objdump -D  ${PATTERN}.ino.elf >   ${PATTERN}.ino.dump
+	rm *.o *.a
+ifeq ($(SIM),RTL)
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib  \
+	$< -o $@ 
+   endif
+else  
+   ifeq ($(DUMP),OFF)
+	iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+    else  
+	iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+	-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+	$< -o $@ 
+   endif
+endif
+
+%.vcd: %.vvp
+	vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino b/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino
new file mode 100644
index 0000000..524e74d
--- /dev/null
+++ b/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino
@@ -0,0 +1,48 @@
+#define uint32_t  long
+
+#define reg_mprj_globl_reg0  (*(volatile uint32_t*)0x10020000)
+#define reg_mprj_globl_reg1  (*(volatile uint32_t*)0x10020004)
+#define reg_mprj_globl_reg2  (*(volatile uint32_t*)0x10020008)
+#define reg_mprj_globl_reg3  (*(volatile uint32_t*)0x1002000C)
+#define reg_mprj_globl_reg4  (*(volatile uint32_t*)0x10020010)
+#define reg_mprj_globl_reg5  (*(volatile uint32_t*)0x10020014)
+#define reg_mprj_globl_reg6  (*(volatile uint32_t*)0x10020018)
+#define reg_mprj_globl_reg7  (*(volatile uint32_t*)0x1002001C)
+#define reg_mprj_globl_reg8  (*(volatile uint32_t*)0x10020020)
+#define reg_mprj_globl_reg9  (*(volatile uint32_t*)0x10020024)
+#define reg_mprj_globl_reg10 (*(volatile uint32_t*)0x10020028)
+#define reg_mprj_globl_reg11 (*(volatile uint32_t*)0x1002002C)
+#define reg_mprj_globl_reg12 (*(volatile uint32_t*)0x10020030)
+#define reg_mprj_globl_reg13 (*(volatile uint32_t*)0x10020034)
+#define reg_mprj_globl_reg14 (*(volatile uint32_t*)0x10020038)
+#define reg_mprj_globl_reg15 (*(volatile uint32_t*)0x1002003C)
+#define reg_mprj_globl_reg16 (*(volatile uint32_t*)0x10020040)
+#define reg_mprj_globl_reg17 (*(volatile uint32_t*)0x10020044)
+#define reg_mprj_globl_reg18 (*(volatile uint32_t*)0x10020048)
+#define reg_mprj_globl_reg19 (*(volatile uint32_t*)0x1002004C)
+#define reg_mprj_globl_reg20 (*(volatile uint32_t*)0x10020050)
+#define reg_mprj_globl_reg21 (*(volatile uint32_t*)0x10020054)
+#define reg_mprj_globl_reg22 (*(volatile uint32_t*)0x10020058)
+#define reg_mprj_globl_reg23 (*(volatile uint32_t*)0x1002005C)
+#define reg_mprj_globl_reg24 (*(volatile uint32_t*)0x10020060)
+#define reg_mprj_globl_reg25 (*(volatile uint32_t*)0x10020064)
+#define reg_mprj_globl_reg26 (*(volatile uint32_t*)0x10020068)
+#define reg_mprj_globl_reg27 (*(volatile uint32_t*)0x1002006C)
+
+
+
+void setup() {
+  // put your setup code here, to run once:
+    reg_mprj_globl_reg22  = 0x11223344; 
+    reg_mprj_globl_reg23  = 0x22334455; 
+    reg_mprj_globl_reg24  = 0x33445566; 
+    reg_mprj_globl_reg25  = 0x44556677; 
+    reg_mprj_globl_reg26 = 0x55667788; 
+    reg_mprj_globl_reg27 = 0x66778899; 
+
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+
+}
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino.cpp b/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino.cpp
new file mode 100644
index 0000000..ca5efa0
--- /dev/null
+++ b/verilog/dv/arudino_risc_boot/arudino_risc_boot.ino.cpp
@@ -0,0 +1,52 @@
+#include <Arduino.h>
+#define uint32_t  long
+
+#define reg_mprj_globl_reg0  (*(volatile uint32_t*)0x10020000)
+#define reg_mprj_globl_reg1  (*(volatile uint32_t*)0x10020004)
+#define reg_mprj_globl_reg2  (*(volatile uint32_t*)0x10020008)
+#define reg_mprj_globl_reg3  (*(volatile uint32_t*)0x1002000C)
+#define reg_mprj_globl_reg4  (*(volatile uint32_t*)0x10020010)
+#define reg_mprj_globl_reg5  (*(volatile uint32_t*)0x10020014)
+#define reg_mprj_globl_reg6  (*(volatile uint32_t*)0x10020018)
+#define reg_mprj_globl_reg7  (*(volatile uint32_t*)0x1002001C)
+#define reg_mprj_globl_reg8  (*(volatile uint32_t*)0x10020020)
+#define reg_mprj_globl_reg9  (*(volatile uint32_t*)0x10020024)
+#define reg_mprj_globl_reg10 (*(volatile uint32_t*)0x10020028)
+#define reg_mprj_globl_reg11 (*(volatile uint32_t*)0x1002002C)
+#define reg_mprj_globl_reg12 (*(volatile uint32_t*)0x10020030)
+#define reg_mprj_globl_reg13 (*(volatile uint32_t*)0x10020034)
+#define reg_mprj_globl_reg14 (*(volatile uint32_t*)0x10020038)
+#define reg_mprj_globl_reg15 (*(volatile uint32_t*)0x1002003C)
+#define reg_mprj_globl_reg16 (*(volatile uint32_t*)0x10020040)
+#define reg_mprj_globl_reg17 (*(volatile uint32_t*)0x10020044)
+#define reg_mprj_globl_reg18 (*(volatile uint32_t*)0x10020048)
+#define reg_mprj_globl_reg19 (*(volatile uint32_t*)0x1002004C)
+#define reg_mprj_globl_reg20 (*(volatile uint32_t*)0x10020050)
+#define reg_mprj_globl_reg21 (*(volatile uint32_t*)0x10020054)
+#define reg_mprj_globl_reg22 (*(volatile uint32_t*)0x10020058)
+#define reg_mprj_globl_reg23 (*(volatile uint32_t*)0x1002005C)
+#define reg_mprj_globl_reg24 (*(volatile uint32_t*)0x10020060)
+#define reg_mprj_globl_reg25 (*(volatile uint32_t*)0x10020064)
+#define reg_mprj_globl_reg26 (*(volatile uint32_t*)0x10020068)
+#define reg_mprj_globl_reg27 (*(volatile uint32_t*)0x1002006C)
+
+
+
+void setup();
+void loop();
+void setup() {
+  // put your setup code here, to run once:
+    reg_mprj_globl_reg22  = 0x11223344; 
+    reg_mprj_globl_reg23  = 0x22334455; 
+    reg_mprj_globl_reg24  = 0x33445566; 
+    reg_mprj_globl_reg25  = 0x44556677; 
+    reg_mprj_globl_reg26 = 0x55667788; 
+    reg_mprj_globl_reg27 = 0x66778899; 
+
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+
+}
+
diff --git a/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v b/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
new file mode 100644
index 0000000..d6362c1
--- /dev/null
+++ b/verilog/dv/arudino_risc_boot/arudino_risc_boot_tb.v
@@ -0,0 +1,423 @@
+////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText:  2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
+//////////////////////////////////////////////////////////////////////
+////                                                              ////
+////  Standalone User validation Test bench                       ////
+////                                                              ////
+////  This file is part of the YIFive cores project               ////
+////  https://github.com/dineshannayya/yifive_r0.git              ////
+////  http://www.opencores.org/cores/yifive/                      ////
+////                                                              ////
+////  Description                                                 ////
+////   This is a standalone test bench to validate the            ////
+////   Digital core.                                              ////
+////   1. User Risc core is booted using  compiled code of        ////
+////      user_risc_boot.c                                        ////
+////   2. User Risc core uses Serial Flash and SDRAM to boot      ////
+////   3. After successful boot, Risc core will  write signature  ////
+////      in to  user register from 0x1003_0058 to 0x1003_006C    ////
+////   4. Through the External Wishbone Interface we read back    ////
+////       from 0x3003_0058 to 0x3003_006C                        ////
+////       and validate the user register to declared pass fail   ////
+////                                                              ////
+////  To Do:                                                      ////
+////    nothing                                                   ////
+////                                                              ////
+////  Author(s):                                                  ////
+////      - Dinesh Annayya, dinesha@opencores.org                 ////
+////                                                              ////
+////  Revision :                                                  ////
+////    0.1 - 16th Feb 2021, Dinesh A                             ////
+////                                                              ////
+//////////////////////////////////////////////////////////////////////
+////                                                              ////
+//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
+////                                                              ////
+//// This source file may be used and distributed without         ////
+//// restriction provided that this copyright statement is not    ////
+//// removed from the file and that any derivative work contains  ////
+//// the original copyright notice and the associated disclaimer. ////
+////                                                              ////
+//// This source file is free software; you can redistribute it   ////
+//// and/or modify it under the terms of the GNU Lesser General   ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any   ////
+//// later version.                                               ////
+////                                                              ////
+//// This source is distributed in the hope that it will be       ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
+//// PURPOSE.  See the GNU Lesser General Public License for more ////
+//// details.                                                     ////
+////                                                              ////
+//// You should have received a copy of the GNU Lesser General    ////
+//// Public License along with this source; if not, download it   ////
+//// from http://www.opencores.org/lgpl.shtml                     ////
+////                                                              ////
+//////////////////////////////////////////////////////////////////////
+
+`default_nettype wire
+
+`timescale 1 ns / 1 ns
+
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+module arudino_risc_boot_tb;
+	reg clock;
+	reg wb_rst_i;
+	reg power1, power2;
+	reg power3, power4;
+
+        reg        wbd_ext_cyc_i;  // strobe/request
+        reg        wbd_ext_stb_i;  // strobe/request
+        reg [31:0] wbd_ext_adr_i;  // address
+        reg        wbd_ext_we_i;  // write
+        reg [31:0] wbd_ext_dat_i;  // data output
+        reg [3:0]  wbd_ext_sel_i;  // byte enable
+
+        wire [31:0] wbd_ext_dat_o;  // data input
+        wire        wbd_ext_ack_o;  // acknowlegement
+        wire        wbd_ext_err_o;  // error
+
+	// User I/O
+	wire [37:0] io_oeb;
+	wire [37:0] io_out;
+	wire [37:0] io_in;
+
+	wire gpio;
+	wire [37:0] mprj_io;
+	wire [7:0] mprj_io_0;
+	reg         test_fail;
+	reg [31:0] read_data;
+	integer    d_risc_id;
+
+
+
+	// External clock is used by default.  Make this artificially fast for the
+	// simulation.  Normally this would be a slow clock and the digital PLL
+	// would be the fast clock.
+
+	always #12.5 clock <= (clock === 1'b0);
+
+	initial begin
+		clock = 0;
+                wbd_ext_cyc_i ='h0;  // strobe/request
+                wbd_ext_stb_i ='h0;  // strobe/request
+                wbd_ext_adr_i ='h0;  // address
+                wbd_ext_we_i  ='h0;  // write
+                wbd_ext_dat_i ='h0;  // data output
+                wbd_ext_sel_i ='h0;  // byte enable
+	end
+
+	`ifdef WFDUMP
+	   initial begin
+	   	$dumpfile("simx.vcd");
+	   	$dumpvars(3, arudino_risc_boot_tb);
+	   end
+       `endif
+
+	initial begin
+
+		$value$plusargs("risc_core_id=%d", d_risc_id);
+
+		#200; // Wait for reset removal
+	        repeat (10) @(posedge clock);
+		$display("Monitor: Standalone User Risc Boot Test Started");
+
+		// Remove Wb Reset
+		wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+
+	        repeat (2) @(posedge clock);
+		#1;
+		// Remove all the reset
+		if(d_risc_id == 0) begin
+		     $display("STATUS: Working with Risc core 0");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+		end else if(d_risc_id == 1) begin
+		     $display("STATUS: Working with Risc core 1");
+                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h21F);
+		end
+
+
+		// Repeat cycles of 1000 clock edges as needed to complete testbench
+		repeat (30) begin
+			repeat (1000) @(posedge clock);
+			// $display("+1000 cycles");
+		end
+
+
+		$display("Monitor: Reading Back the expected value");
+		// User RISC core expect to write these value in global
+		// register, read back and decide on pass fail
+		// 0x30000018  = 0x11223344; 
+                // 0x3000001C  = 0x22334455; 
+                // 0x30000020  = 0x33445566; 
+                // 0x30000024  = 0x44556677; 
+                // 0x30000028 = 0x55667788; 
+                // 0x3000002C = 0x66778899; 
+
+                test_fail = 0;
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data,32'h11223344);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h22334455);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h33445566);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,read_data,32'h44556677);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,read_data,32'h55667788);
+		wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,read_data,32'h66778899);
+
+
+	   
+	    	$display("###################################################");
+          	if(test_fail == 0) begin
+		   `ifdef GL
+	    	       $display("Monitor: Standalone User Risc Boot (GL) Passed");
+		   `else
+		       $display("Monitor: Standalone User Risc Boot (RTL) Passed");
+		   `endif
+	        end else begin
+		    `ifdef GL
+	    	        $display("Monitor: Standalone User Risc Boot (GL) Failed");
+		    `else
+		        $display("Monitor: Standalone User Risc Boot (RTL) Failed");
+		    `endif
+		 end
+	    	$display("###################################################");
+	    $finish;
+	end
+
+	initial begin
+		wb_rst_i <= 1'b1;
+		#100;
+		wb_rst_i <= 1'b0;	    	// Release reset
+	end
+wire USER_VDD1V8 = 1'b1;
+wire VSS = 1'b0;
+
+user_project_wrapper u_top(
+`ifdef USE_POWER_PINS
+    .vccd1(USER_VDD1V8),	// User area 1 1.8V supply
+    .vssd1(VSS),	// User area 1 digital ground
+`endif
+    .wb_clk_i        (clock),  // System clock
+    .user_clock2     (1'b1),  // Real-time clock
+    .wb_rst_i        (wb_rst_i),  // Regular Reset signal
+
+    .wbs_cyc_i   (wbd_ext_cyc_i),  // strobe/request
+    .wbs_stb_i   (wbd_ext_stb_i),  // strobe/request
+    .wbs_adr_i   (wbd_ext_adr_i),  // address
+    .wbs_we_i    (wbd_ext_we_i),  // write
+    .wbs_dat_i   (wbd_ext_dat_i),  // data output
+    .wbs_sel_i   (wbd_ext_sel_i),  // byte enable
+
+    .wbs_dat_o   (wbd_ext_dat_o),  // data input
+    .wbs_ack_o   (wbd_ext_ack_o),  // acknowlegement
+
+ 
+    // Logic Analyzer Signals
+    .la_data_in      ('1) ,
+    .la_data_out     (),
+    .la_oenb         ('0),
+ 
+
+    // IOs
+    .io_in          (io_in)  ,
+    .io_out         (io_out) ,
+    .io_oeb         (io_oeb) ,
+
+    .user_irq       () 
+
+);
+
+`ifndef GL // Drive Power for Hold Fix Buf
+    // All standard cell need power hook-up for functionality work
+    initial begin
+
+    end
+`endif    
+
+//------------------------------------------------------
+//  Integrate the Serial flash with qurd support to
+//  user core using the gpio pads
+//  ----------------------------------------------------
+
+   wire flash_clk = io_out[24];
+   wire flash_csb = io_out[25];
+   // Creating Pad Delay
+   wire #1 io_oeb_29 = io_oeb[29];
+   wire #1 io_oeb_30 = io_oeb[30];
+   wire #1 io_oeb_31 = io_oeb[31];
+   wire #1 io_oeb_32 = io_oeb[32];
+   tri  #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
+   tri  #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
+   tri  #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
+   tri  #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+
+   assign io_in[29] = flash_io0;
+   assign io_in[30] = flash_io1;
+   assign io_in[31] = flash_io2;
+   assign io_in[32] = flash_io3;
+
+   // Quard flash
+     s25fl256s #(.mem_file_name("arudino_risc_boot.ino.hex"),
+	         .otp_file_name("none"),
+                 .TimingModel("S25FL512SAGMFI010_F_30pF")) 
+		 u_spi_flash_256mb (
+           // Data Inputs/Outputs
+       .SI      (flash_io0),
+       .SO      (flash_io1),
+       // Controls
+       .SCK     (flash_clk),
+       .CSNeg   (flash_csb),
+       .WPNeg   (flash_io2),
+       .HOLDNeg (flash_io3),
+       .RSTNeg  (!wb_rst_i)
+
+       );
+
+
+
+
+task wb_user_core_write;
+input [31:0] address;
+input [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h1;  // write
+  wbd_ext_dat_i =data;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
+  repeat (2) @(posedge clock);
+end
+endtask
+
+task  wb_user_core_read;
+input [31:0] address;
+output [31:0] data;
+reg    [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='0;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(negedge clock);
+  data  = wbd_ext_dat_o;  
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
+  repeat (2) @(posedge clock);
+end
+endtask
+
+task  wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg    [31:0] data;
+begin
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_adr_i =address;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='0;  // data output
+  wbd_ext_sel_i ='hF;  // byte enable
+  wbd_ext_cyc_i ='h1;  // strobe/request
+  wbd_ext_stb_i ='h1;  // strobe/request
+  wait(wbd_ext_ack_o == 1);
+  repeat (1) @(negedge clock);
+  data  = wbd_ext_dat_o;  
+  repeat (1) @(posedge clock);
+  #1;
+  wbd_ext_cyc_i ='h0;  // strobe/request
+  wbd_ext_stb_i ='h0;  // strobe/request
+  wbd_ext_adr_i ='h0;  // address
+  wbd_ext_we_i  ='h0;  // write
+  wbd_ext_dat_i ='h0;  // data output
+  wbd_ext_sel_i ='h0;  // byte enable
+  if(data !== cmp_data) begin
+     $display("ERROR : WB USER ACCESS READ  Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+     test_fail = 1;
+  end else begin
+     $display("STATUS: WB USER ACCESS READ  Address : 0x%x, Data : 0x%x",address,data);
+  end
+  repeat (2) @(posedge clock);
+end
+endtask
+
+`ifdef GL
+
+wire        wbd_spi_stb_i   = u_top.u_qspi_master.wbd_stb_i;
+wire        wbd_spi_ack_o   = u_top.u_qspi_master.wbd_ack_o;
+wire        wbd_spi_we_i    = u_top.u_qspi_master.wbd_we_i;
+wire [31:0] wbd_spi_adr_i   = u_top.u_qspi_master.wbd_adr_i;
+wire [31:0] wbd_spi_dat_i   = u_top.u_qspi_master.wbd_dat_i;
+wire [31:0] wbd_spi_dat_o   = u_top.u_qspi_master.wbd_dat_o;
+wire [3:0]  wbd_spi_sel_i   = u_top.u_qspi_master.wbd_sel_i;
+
+wire        wbd_uart_stb_i  = u_top.u_uart_i2c_usb_spi.reg_cs;
+wire        wbd_uart_ack_o  = u_top.u_uart_i2c_usb_spi.reg_ack;
+wire        wbd_uart_we_i   = u_top.u_uart_i2c_usb_spi.reg_wr;
+wire [8:0]  wbd_uart_adr_i  = u_top.u_uart_i2c_usb_spi.reg_addr;
+wire [7:0]  wbd_uart_dat_i  = u_top.u_uart_i2c_usb_spi.reg_wdata;
+wire [7:0]  wbd_uart_dat_o  = u_top.u_uart_i2c_usb_spi.reg_rdata;
+wire        wbd_uart_sel_i  = u_top.u_uart_i2c_usb_spi.reg_be;
+
+`endif
+
+/**
+`ifdef GL
+//-----------------------------------------------------------------------------
+// RISC IMEM amd DMEM Monitoring TASK
+//-----------------------------------------------------------------------------
+
+`define RISC_CORE  user_uart_tb.u_top.u_core.u_riscv_top
+
+always@(posedge `RISC_CORE.wb_clk) begin
+    if(`RISC_CORE.wbd_imem_ack_i)
+          $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
+    if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
+          $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
+    if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
+          $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
+end
+
+`endif
+**/
+endmodule
+`include "s25fl256s.sv"
+`default_nettype wire
diff --git a/verilog/dv/common/riscduino_board b/verilog/dv/common/riscduino_board
new file mode 160000
index 0000000..151bdbe
--- /dev/null
+++ b/verilog/dv/common/riscduino_board
@@ -0,0 +1 @@
+Subproject commit 151bdbeadbbfbeda5fb8d0ce8ef5659704871c69
diff --git a/verilog/dv/user_mcore/user_mcore_tb.v b/verilog/dv/user_mcore/user_mcore_tb.v
index 7751a95..b43dcba 100644
--- a/verilog/dv/user_mcore/user_mcore_tb.v
+++ b/verilog/dv/user_mcore/user_mcore_tb.v
@@ -135,16 +135,8 @@
 	        repeat (2) @(posedge clock);
 		#1;
 		// Remove all the reset
-		if(d_risc_id == 0) begin
-		     $display("STATUS: Working with Risc core 0");
-                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
-		end else if(d_risc_id == 1) begin
-		     $display("STATUS: Working with Risc core 1");
-                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h21F);
-		end else begin
-		     $display("STATUS: Working with Both core Risc core 0 & 1 ");
-                     wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h31F);
-		end
+		$display("STATUS: Working with Both core Risc core 0 & 1 ");
+                wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h31F);
 
 
 		// Repeat cycles of 1000 clock edges as needed to complete testbench