| ////////////////////////////////////////////////////////////////////////////// |
| // SPDX-FileCopyrightText: 2021 , Dinesh Annayya |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // SPDX-License-Identifier: Apache-2.0 |
| // SPDX-FileContributor: Created by Dinesh Annayya <dinesha@opencores.org> |
| // |
| ////////////////////////////////////////////////////////////////////// |
| //// //// |
| //// MBIST TOP //// |
| //// //// |
| //// This file is part of the mbist_ctrl cores project //// |
| //// https://github.com/dineshannayya/mbist_ctrl.git //// |
| //// //// |
| //// Description //// |
| //// This block integrate mbist controller with row //// |
| //// redendency feature //// |
| //// //// |
| //// To Do: //// |
| //// nothing //// |
| //// //// |
| //// Author(s): //// |
| //// - Dinesh Annayya, dinesha@opencores.org //// |
| //// //// |
| //// Revision : //// |
| //// 0.0 - 11th Oct 2021, Dinesh A //// |
| //// Initial integration //// |
| //// 0.1 - 26th Oct 2021, Dinesh A //// |
| //// Fixed Error Address are serial shifted through //// |
| //// sdi/sdo //// |
| //// //// |
| ////////////////////////////////////////////////////////////////////// |
| |
| `include "mbist_def.svh" |
| module mbist_top1 |
| #( |
| parameter BIST_ADDR_WD = 9, |
| parameter BIST_DATA_WD = 32, |
| parameter BIST_ADDR_START = 9'h000, |
| parameter BIST_ADDR_END = 9'h1FB, |
| parameter BIST_REPAIR_ADDR_START = 9'h1FC, |
| parameter BIST_RAD_WD_I = BIST_ADDR_WD, |
| parameter BIST_RAD_WD_O = BIST_ADDR_WD) ( |
| |
| `ifdef USE_POWER_PINS |
| inout vccd1, // User area 1 1.8V supply |
| inout vssd1, // User area 1 digital ground |
| `endif |
| |
| // Clock Skew Adjust |
| input logic wbd_clk_int, |
| output logic wbd_clk_mbist, |
| input logic [3:0] cfg_cska_mbist, // clock skew adjust for web host |
| |
| input logic rst_n, |
| |
| // MBIST I/F |
| input logic bist_en, |
| input logic bist_run, |
| input logic bist_shift, |
| input logic bist_load, |
| input logic bist_sdi, |
| |
| output logic [3:0] bist_error_cnt, |
| output logic bist_correct, |
| output logic bist_error, |
| output logic bist_done, |
| output logic bist_sdo, |
| |
| |
| // WB I/F |
| input logic wb_clk_i, // System clock |
| input logic wb_cyc_i, // strobe/request |
| input logic wb_stb_i, // strobe/request |
| input logic [BIST_ADDR_WD-1:0] wb_adr_i, // address |
| input logic wb_we_i , // write |
| input logic [BIST_DATA_WD-1:0] wb_dat_i, // data output |
| input logic [BIST_DATA_WD/8-1:0] wb_sel_i, // byte enable |
| output logic [BIST_DATA_WD-1:0] wb_dat_o, // data input |
| output logic wb_ack_o, // acknowlegement |
| output logic wb_err_o, // error |
| |
| // towards memory |
| // PORT-A |
| output logic mem_clk_a, |
| output logic [BIST_ADDR_WD-1:0]mem_addr_a, |
| output logic mem_cen_a, |
| output logic [BIST_DATA_WD-1:0]mem_din_b, |
| // PORT-B |
| output logic mem_clk_b, |
| output logic mem_cen_b, |
| output logic mem_web_b, |
| output logic [BIST_DATA_WD/8-1:0]mem_mask_b, |
| output logic [BIST_ADDR_WD-1:0]mem_addr_b, |
| input logic [BIST_DATA_WD-1:0]mem_dout_a |
| |
| |
| |
| |
| ); |
| |
| // FUNCTIONAL A PORT |
| logic func_clk_a; |
| logic func_cen_a; |
| logic [BIST_ADDR_WD-1:0]func_addr_a; |
| logic [BIST_DATA_WD-1:0]func_dout_a; |
| |
| // Functional B Port |
| logic func_clk_b; |
| logic func_cen_b; |
| logic func_web_b; |
| logic [BIST_DATA_WD/8-1:0]func_mask_b; |
| logic [BIST_ADDR_WD-1:0]func_addr_b; |
| logic [BIST_DATA_WD-1:0]func_din_b; |
| //---------------------------------------------------- |
| // Local variable defination |
| // --------------------------------------------------- |
| // |
| logic srst_n ; // sync reset w.r.t bist_clk |
| logic cmd_phase ; // Command Phase |
| logic cmp_phase ; // Compare Phase |
| logic run_op ; // Run next Operation |
| logic run_addr ; // Run Next Address |
| logic run_sti ; // Run Next Stimulus |
| logic run_pat ; // Run Next Pattern |
| logic op_updown ; // Adress updown direction |
| logic last_addr ; // last address indication |
| logic last_sti ; // last stimulus |
| logic last_op ; // last operation |
| logic last_pat ; // last pattern |
| logic [BIST_DATA_WD-1:0] pat_data ; // Selected Data Pattern |
| logic [BIST_STI_WD-1:0] stimulus ; // current stimulus |
| logic compare ; // compare data |
| logic op_repeatflag; |
| logic op_reverse; |
| logic op_read ; |
| logic op_write ; |
| logic op_invert ; |
| |
| //--------------------------------- |
| // SDI => SDO diasy chain |
| // bist_sdi => bist_addr_sdo => bist_sti_sdo => bist_op_sdo => bist_pat_sdo => bist_sdo |
| // --------------------------------- |
| logic bist_addr_sdo ; |
| logic bist_sti_sdo ; |
| logic bist_op_sdo ; |
| logic bist_pat_sdo ; |
| |
| logic bist_error_correct ; |
| logic [BIST_ADDR_WD-1:0]bist_error_addr ; // bist address |
| |
| logic [BIST_ADDR_WD-1:0]bist_addr ; // bist address |
| logic [BIST_DATA_WD-1:0] bist_wdata ; // bist write data |
| logic bist_wr ; |
| logic bist_rd ; |
| |
| |
| assign bist_wr = (cmd_phase && op_write); |
| assign bist_rd = (cmd_phase && op_read); |
| |
| assign compare = (cmp_phase && op_read); |
| assign bist_wdata = (op_invert) ? ~pat_data : pat_data; |
| |
| // Clock Tree branching to avoid clock latency towards SRAM path |
| wire wb_clk_b1,wb_clk_b2; |
| ctech_clk_buf u_cts_wb_clk_b1 (.A (wb_clk_i), . X(wb_clk_b1)); |
| ctech_clk_buf u_cts_wb_clk_b2 (.A (wb_clk_i), . X(wb_clk_b2)); |
| |
| // wb_host clock skew control |
| clk_skew_adjust u_skew_mbist |
| ( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| .clk_in (wbd_clk_int ), |
| .sel (cfg_cska_mbist ), |
| .clk_out (wbd_clk_mbist ) |
| ); |
| |
| reset_sync u_reset_sync ( |
| .scan_mode (1'b0 ), |
| .dclk (wb_clk_b1 ), // Destination clock domain |
| .arst_n (rst_n ), // active low async reset |
| .srst_n (srst_n ) |
| ); |
| |
| |
| |
| // bist main control FSM |
| |
| mbist_fsm |
| #( |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ), |
| .BIST_ADDR_START (BIST_ADDR_START ), |
| .BIST_ADDR_END (BIST_ADDR_END ), |
| .BIST_REPAIR_ADDR_START (BIST_REPAIR_ADDR_START ), |
| .BIST_RAD_WD_I (BIST_RAD_WD_I ), |
| .BIST_RAD_WD_O (BIST_RAD_WD_O ) |
| ) |
| u_fsm ( |
| |
| .cmd_phase (cmd_phase ), |
| .cmp_phase (cmp_phase ), |
| .run_op (run_op ), |
| .run_addr (run_addr ), |
| .run_sti (run_sti ), |
| .run_pat (run_pat ), |
| .bist_done (bist_done ), |
| |
| |
| .clk (wb_clk_b1 ), |
| .rst_n (srst_n ), |
| .bist_run (bist_run ), |
| .last_op (last_op ), |
| .last_addr (last_addr ), |
| .last_sti (last_sti ), |
| .last_pat (last_pat ), |
| .op_reverse (op_reverse ), |
| .bist_error (bist_error ) |
| ); |
| |
| |
| // bist address generation |
| mbist_addr_gen |
| #( |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ), |
| .BIST_ADDR_START (BIST_ADDR_START ), |
| .BIST_ADDR_END (BIST_ADDR_END ), |
| .BIST_REPAIR_ADDR_START (BIST_REPAIR_ADDR_START ), |
| .BIST_RAD_WD_I (BIST_RAD_WD_I ), |
| .BIST_RAD_WD_O (BIST_RAD_WD_O ) |
| ) |
| u_addr_gen( |
| .last_addr (last_addr ), |
| .bist_addr (bist_addr ), |
| .sdo (bist_addr_sdo ), |
| |
| .clk (wb_clk_b1 ), |
| .rst_n (srst_n ), |
| .run (run_addr ), |
| .updown (op_updown ), |
| .scan_shift (bist_shift ), |
| .scan_load (bist_load ), |
| .sdi (bist_sdi ) |
| |
| ); |
| |
| |
| // BIST current stimulus selection |
| mbist_sti_sel |
| #( |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ), |
| .BIST_ADDR_START (BIST_ADDR_START ), |
| .BIST_ADDR_END (BIST_ADDR_END ), |
| .BIST_REPAIR_ADDR_START (BIST_REPAIR_ADDR_START ), |
| .BIST_RAD_WD_I (BIST_RAD_WD_I ), |
| .BIST_RAD_WD_O (BIST_RAD_WD_O ) |
| ) |
| u_sti_sel( |
| |
| .sdo (bist_sti_sdo ), |
| .last_stimulus (last_sti ), |
| .stimulus (stimulus ), |
| |
| .clk (wb_clk_b1 ), |
| .rst_n (srst_n ), |
| .scan_shift (bist_shift ), |
| .sdi (bist_addr_sdo ), |
| .run (run_sti ) |
| |
| ); |
| |
| |
| // Bist Operation selection |
| mbist_op_sel |
| #( |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ), |
| .BIST_ADDR_START (BIST_ADDR_START ), |
| .BIST_ADDR_END (BIST_ADDR_END ), |
| .BIST_REPAIR_ADDR_START (BIST_REPAIR_ADDR_START ), |
| .BIST_RAD_WD_I (BIST_RAD_WD_I ), |
| .BIST_RAD_WD_O (BIST_RAD_WD_O ) |
| ) |
| u_op_sel ( |
| |
| .op_read (op_read ), |
| .op_write (op_write ), |
| .op_invert (op_invert ), |
| .op_updown (op_updown ), |
| .op_reverse (op_reverse ), |
| .op_repeatflag (op_repeatflag ), |
| .sdo (bist_op_sdo ), |
| .last_op (last_op ), |
| |
| .clk (wb_clk_b1 ), |
| .rst_n (srst_n ), |
| .scan_shift (bist_shift ), |
| .sdi (bist_sti_sdo ), |
| .re_init (bist_error_correct ), |
| .run (run_op ), |
| .stimulus (stimulus ) |
| |
| ); |
| |
| |
| |
| mbist_pat_sel |
| #( |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ), |
| .BIST_ADDR_START (BIST_ADDR_START ), |
| .BIST_ADDR_END (BIST_ADDR_END ), |
| .BIST_REPAIR_ADDR_START (BIST_REPAIR_ADDR_START ), |
| .BIST_RAD_WD_I (BIST_RAD_WD_I ), |
| .BIST_RAD_WD_O (BIST_RAD_WD_O ) |
| ) |
| u_pat_sel ( |
| .pat_last (last_pat ), |
| .pat_data (pat_data ), |
| .sdo (bist_pat_sdo ), |
| .clk (wb_clk_b1 ), |
| .rst_n (srst_n ), |
| .run (run_pat ), |
| .scan_shift (bist_shift ), |
| .sdi (bist_op_sdo ) |
| |
| ); |
| |
| |
| mbist_data_cmp |
| #( |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ), |
| .BIST_ADDR_START (BIST_ADDR_START ), |
| .BIST_ADDR_END (BIST_ADDR_END ), |
| .BIST_REPAIR_ADDR_START (BIST_REPAIR_ADDR_START ), |
| .BIST_RAD_WD_I (BIST_RAD_WD_I ), |
| .BIST_RAD_WD_O (BIST_RAD_WD_O ) |
| ) |
| |
| |
| u_cmp ( |
| .error (bist_error ), |
| .error_correct (bist_error_correct ), |
| .correct ( ), // same signal available at bist mux |
| .error_addr (bist_error_addr ), |
| .error_cnt (bist_error_cnt ), |
| .clk (wb_clk_b1 ), |
| .rst_n (srst_n ), |
| .addr_inc_phase (run_addr ), |
| .compare (compare ), |
| .read_invert (op_invert ), |
| .comp_data (pat_data ), |
| .rxd_data (func_dout_a ), |
| .addr (bist_addr ) |
| |
| ); |
| |
| |
| mbist_mem_wrapper #( |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ) |
| ) u_mem_wrapper( |
| .rst_n (srst_n ), |
| // WB I/F |
| .wb_clk_i (wb_clk_b2 ), // System clock |
| .wb_cyc_i (wb_cyc_i ), // strobe/request |
| .wb_stb_i (wb_stb_i ), // strobe/request |
| .wb_adr_i (wb_adr_i ), // address |
| .wb_we_i (wb_we_i ), // write |
| .wb_dat_i (wb_dat_i ), // data output |
| .wb_sel_i (wb_sel_i ), // byte enable |
| .wb_dat_o (wb_dat_o ), // data input |
| .wb_ack_o (wb_ack_o ), // acknowlegement |
| .wb_err_o (wb_err_o ), // error |
| // MEM A PORT |
| .func_clk_a (func_clk_a ), |
| .func_cen_a (func_cen_a ), |
| .func_addr_a (func_addr_a ), |
| .func_dout_a (func_dout_a ), |
| |
| // Functional B Port |
| .func_clk_b (func_clk_b ), |
| .func_cen_b (func_cen_b ), |
| .func_web_b (func_web_b ), |
| .func_mask_b (func_mask_b ), |
| .func_addr_b (func_addr_b ), |
| .func_din_b (func_din_b ) |
| ); |
| |
| |
| mbist_mux |
| #( |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ), |
| .BIST_ADDR_START (BIST_ADDR_START ), |
| .BIST_ADDR_END (BIST_ADDR_END ), |
| .BIST_REPAIR_ADDR_START (BIST_REPAIR_ADDR_START ), |
| .BIST_RAD_WD_I (BIST_RAD_WD_I ), |
| .BIST_RAD_WD_O (BIST_RAD_WD_O ) |
| ) |
| u_mem_sel ( |
| |
| .scan_mode (1'b0 ), |
| |
| .rst_n (srst_n ), |
| // MBIST CTRL SIGNAL |
| .bist_en (bist_en ), |
| .bist_addr (bist_addr ), |
| .bist_wdata (bist_wdata ), |
| .bist_clk (wb_clk_b2 ), |
| .bist_wr (bist_wr ), |
| .bist_rd (bist_rd ), |
| .bist_error (bist_error_correct), |
| .bist_error_addr (bist_error_addr), |
| .bist_correct (bist_correct ), |
| .bist_sdi (bist_pat_sdo), |
| .bist_shift (bist_shift), |
| .bist_sdo (bist_sdo), |
| |
| // FUNCTIONAL CTRL SIGNAL |
| .func_clk_a (func_clk_a ), |
| .func_cen_a (func_cen_a ), |
| .func_addr_a (func_addr_a ), |
| // Common for func and Mbist i/f |
| .func_dout_a (func_dout_a ), |
| |
| .func_clk_b (func_clk_b ), |
| .func_cen_b (func_cen_b ), |
| .func_web_b (func_web_b ), |
| .func_mask_b (func_mask_b ), |
| .func_addr_b (func_addr_b ), |
| .func_din_b (func_din_b ), |
| |
| |
| // towards memory |
| // Memory Out Port |
| .mem_clk_a (mem_clk_a ), |
| .mem_cen_a (mem_cen_a ), |
| .mem_addr_a (mem_addr_a ), |
| .mem_dout_a (mem_dout_a ), |
| |
| // Memory Input Port |
| .mem_clk_b (mem_clk_b ), |
| .mem_cen_b (mem_cen_b ), |
| .mem_web_b (mem_web_b ), |
| .mem_mask_b (mem_mask_b ), |
| .mem_addr_b (mem_addr_b ), |
| .mem_din_b (mem_din_b ) |
| ); |
| |
| |
| endmodule |
| |
