// SPDX-FileCopyrightText: 2020 Efabless Corporation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// SPDX-License-Identifier: Apache-2.0

`default_nettype none
/*
*-------------------------------------------------------------
*
* user_project_wrapper
*
* This wrapper enumerates all of the pins available to the
* user for the user project.
*
* An example user project is provided in this wrapper.  The
* example should be removed and replaced with the actual
* user project.
*
*-------------------------------------------------------------
*/

module user_project_wrapper #(parameter BITS = 32) (
`ifdef USE_POWER_PINS
  inout                       vdda1      , // User area 1 3.3V supply
  inout                       vdda2      , // User area 2 3.3V supply
  inout                       vssa1      , // User area 1 analog ground
  inout                       vssa2      , // User area 2 analog ground
  inout                       vccd1      , // User area 1 1.8V supply
  inout                       vccd2      , // User area 2 1.8v supply
  inout                       vssd1      , // User area 1 digital ground
  inout                       vssd2      , // User area 2 digital ground
`endif
  // Wishbone Slave ports (WB MI A)
  input                       wb_clk_i   ,
  input                       wb_rst_i   ,
  input                       wbs_stb_i  ,
  input                       wbs_cyc_i  ,
  input                       wbs_we_i   ,
  input  [               3:0] wbs_sel_i  ,
  input  [              31:0] wbs_dat_i  ,
  input  [              31:0] wbs_adr_i  ,
  output                      wbs_ack_o  ,
  output [              31:0] wbs_dat_o  ,
  // Logic Analyzer Signals
  input  [             127:0] la_data_in ,
  output [             127:0] la_data_out,
  input  [             127:0] la_oenb    ,
  // IOs
  input  [ `MPRJ_IO_PADS-1:0] io_in      ,
  output [ `MPRJ_IO_PADS-1:0] io_out     ,
  output [ `MPRJ_IO_PADS-1:0] io_oeb     ,
  // Analog (direct connection to GPIO pad---use with caution)
  // Note that analog I/O is not available on the 7 lowest-numbered
  // GPIO pads, and so the analog_io indexing is offset from the
  // GPIO indexing by 7 (also upper 2 GPIOs do not have analog_io).
  inout  [`MPRJ_IO_PADS-10:0] analog_io  ,
  // Independent clock (on independent integer divider)
  input                       user_clock2,
  // User maskable interrupt signals
  output [               2:0] user_irq
);


  wire [ 8:0] sram_addr_a;
  wire [ 8:0] sram_addr_b;
  wire [31:0] sram_dout_a;
  wire [31:0] sram_dout_b;
  wire [31:0] sram_din_a ;
  wire [31:0] sram_din_b ;
  wire        sram_csb_b ;
  wire        sram_csb_a ;
  wire        sram_web_b ;
  wire [ 3:0] sram_mask_b;


  user_proj_example mprj (
    `ifdef USE_POWER_PINS
    .vccd1      (vccd1      ), // User area 1 1.8V power
    .vssd1      (vssd1      ), // User area 1 digital ground
    `endif
    .wb_clk_i   (wb_clk_i   ),
    .wb_rst_i   (wb_rst_i   ),
    .wbs_stb_i  (wbs_stb_i  ),
    .wbs_cyc_i  (wbs_cyc_i  ),
    .wbs_we_i   (wbs_we_i   ),
    .wbs_sel_i  (wbs_sel_i  ),
    .wbs_dat_i  (wbs_dat_i  ),
    .wbs_adr_i  (wbs_adr_i  ),
    .wbs_ack_o  (wbs_ack_o  ),
    .wbs_dat_o  (wbs_dat_o  ),
    .la_data_in (la_data_in ),
    .la_data_out(la_data_out),
    .la_oenb    (la_oenb    ),
    .io_in      (io_in      ),
    .io_out     (io_out     ),
    .io_oeb     (io_oeb     ),
    .irq        (user_irq   ),
    .sram_csb_a (sram_csb_a ),
    .sram_addr_a(sram_addr_a),
    .sram_dout_a(sram_dout_a),
    .sram_csb_b (sram_csb_b ),
    .sram_web_b (sram_web_b ),
    .sram_mask_b(sram_mask_b),
    .sram_addr_b(sram_addr_b),
    .sram_din_b (sram_din_b )
  );


  sky130_sram_2kbyte_1rw1r_32x512_8 u_sram1_2kb (
    `ifdef USE_POWER_PINS
    .vccd1 (vccd1      ), // User area 1 1.8V supply
    .vssd1 (vssd1      ), // User area 1 digital ground
    `endif
    // Port 0: RW
    .clk0  (wb_clk_i   ),
    .csb0  (sram_csb_b ),
    .web0  (sram_web_b ),
    .wmask0(sram_mask_b),
    .addr0 (sram_addr_b),
    .din0  (sram_din_b ),
    .dout0 (),
    // Port 1: R
    .clk1  (wb_clk_i   ),
    .csb1  (sram_csb_a ),
    .addr1 (sram_addr_a),
    .dout1 (sram_dout_a)
  );

endmodule	// user_project_wrapper

`default_nettype wire