** sch_path: /home/darunix/GitSandboxes/VCO/vco/xschem/3-stage_cs-vco_tb.sch
**.subckt 3-stage_cs-vco_tb vctrl out buf16_out
*.iopin vctrl
*.iopin out
*.iopin buf16_out

*POST-LAYOUT
x1 net1 net2 out vctrl x3-stage_cs-vco_dp7

V2 vdd GND 1.8
Vmeas_current_vdd vdd net1 0
Vmeas_current_gnd net2 GND 0
x2 vdd out GND fdiv2_loadmodel
x3 out GND GND vdd vdd buf1_out sky130_fd_sc_hd__clkbuf_1
x4 buf1_out GND GND vdd vdd net4 sky130_fd_sc_hd__clkbuf_2
x5 net4 GND GND vdd vdd net5 sky130_fd_sc_hd__clkbuf_4
x6 net5 GND GND vdd vdd net3 sky130_fd_sc_hd__clkbuf_8
x7 net3 GND GND vdd vdd buf16_out sky130_fd_sc_hd__clkbuf_16
**** begin user architecture code

.lib /usr/local/share/pdk/sky130A/libs.tech/ngspice/sky130.lib.spice tt
.include /usr/local/share/pdk/sky130A/libs.ref/sky130_fd_sc_hd/spice/sky130_fd_sc_hd.spice


*V1 vctrl GND 0.9
V1 vctrl GND pwl(0, 0, 1n, 0, 1.1n, 0.9, 2n, 0.9, 2.1n, {vcontrol_par})

*.options savecurrents

*Trying to get the syntax right for probing M26 current:
*.probe tran I(m.x1.xm26,1)
*.save tran I(m.x1.xm26,1)
*.probe tran @m.x1.xm26[id]
*.save tran @m.x1.xm26[id]
*.probe tran @m.x1.xm26.msky130_fd_pr__nfet_01v8[id]
*.save tran @m.x1.xm26.msky130_fd_pr__nfet_01v8[id]


*NEXT THIS:
*PROBES FOR M26 AND M7 CURRENT IN POST-LAYOUT NETLIST:
  .probe tran all @m.x1.xxm26.x0.msky130_fd_pr__nfet_01v8[id]
  .save tran all @m.x1.xxm26.x0.msky130_fd_pr__nfet_01v8[id]
  .probe tran all @m.x1.xxm16.x0.msky130_fd_pr__nfet_01v8[id]
  .save tran all @m.x1.xxm16.x0.msky130_fd_pr__nfet_01v8[id]


*IF NORMAL circuit: (couldn't wrap this inside an if)
 * .probe tran all @m.x1.xm26.msky130_fd_pr__nfet_01v8[id]
 * .save tran all @m.x1.xm26.msky130_fd_pr__nfet_01v8[id]
 * .probe tran all @m.x1.xm7.msky130_fd_pr__nfet_01v8[id]
 * .save tran all @m.x1.xm7.msky130_fd_pr__nfet_01v8[id]

*IF LVT circuit: (couldn't wrap this inside an if)
  *.probe tran all @m.x1.xm26.msky130_fd_pr__nfet_01v8_lvt[id]
  *.save tran all @m.x1.xm26.msky130_fd_pr__nfet_01v8_lvt[id]
  *.probe tran all @m.x1.xm7.msky130_fd_pr__nfet_01v8_lvt[id]
  *.save tran all @m.x1.xm7.msky130_fd_pr__nfet_01v8_lvt[id]


.control


let do_vctrl_sweep = 1
let do_dimensions_sweep = 0


.param vcontrol_par = 0.9


*This is to parameterize transient step/stop/start times
*using variables:
set t_start = 0
set t_step = 10p
let expected_frequency_vec = 1G
let nperiods_vec = 100
let t_stop_vec = nperiods_vec / expected_frequency_vec
set t_stop = $&t_stop_vec

*-----------------------
*SEE IF THIS DOESN'T BREAK IT:
*Trying to sync the params with the variables:
*Just for the measure statements:
.param t_start_par = 0
.param t_step_par = 10p
.param t_stop_par = 100n
alterparam t_start_par = $t_start
alterparam t_step_par = $t_step
alterparam t_stop_par = $t_stop
reset
*-----------------------


if do_vctrl_sweep = 1
  *-------- WHILE LOOP FOR VCTRL SWEEP-----------------
  let start_vctrl = 0.5
  let stop_vctrl = 1.81
  let increment = 0.1
  let vctrl_next = start_vctrl

  let debug_1 = 1234
  let debug_2 = 5678

  let iteration = 1

  while vctrl_next le stop_vctrl

    *alter V1 dc = vctrl_next
    set vctrl_next_var = $&vctrl_next
    alterparam vcontrol_par = $vctrl_next_var
    reset

    *This for fast frequencies:
    *tran 10ps 100ns

    *This for slow frequencies:
    *tran 1000ps 100000ns

    *This is using the (set) variables:
    tran $t_step $t_stop $t_start

    *This is to TRY to parameterize the tran
    *using the global params BUT it doesn't seem
    *to work if the tran is inside the .control.
    *tran 't_step_par' 't_stop_par'


    let vctrl_next = vctrl_next + increment
    let iteration = iteration + 1


    set appendwrite true
    write 3-stage_cs-vco_tb_WITH_APPENDWRITE.raw all


  end
*-------- END WHILE LOOP FOR VCTRL SWEEP-----------------
end $end the if do_vctrl_sweep = 1


if do_dimensions_sweep = 1
  *-------- WHILE LOOP FOR DIMENSIONS SWEEP-----------------
  let start_w = 8.5
  let stop_w = 14.1
  let increment = 0.5
  let w_next = start_w

  let iteration = 1

  while w_next le stop_w

    set w_next_var = $&w_next

    *alterparam W_delay_pmos = $w_next_var
    *alterparam W_delay_nmos = $w_next_var
    *The RESET is required after the alterparam (manual says)
    *reset

    *alterparam W_delay_pmos = 0.42
    *alterparam W_delay_nmos = 0.36

    *alterparam M21_W = 2.88
    *alterparam M22_W = 1.44
    *reset


    *alterparam M21_W =  $w_next_var
    *alterparam M22_W =  {$w_next_var / 2}
    *reset


    *alterparam W_delay_pmos = 0.5
    *alterparam W_delay_nmos = 0.36
    *alterparam M21_W =  0.58
    *alterparam M22_W =  0.36
    *reset


    *----------------------------------
    *Trying to extend Vctrl range:
    *----------------------------------
    *alterparam W_delay_pmos = 0.5
    *alterparam W_delay_nmos = 0.36

    *alterparam W_of_mirrors = $w_next_var
    *alterparam W_of_input_mirror = { $w_next_var * 1.01 / 2.4 }
    *alterparam vcontrol_par = 0.7
    *reset

    *----------------------------------
    *Measure M26 current at Vctrl 0.7 in DP5

    alterparam W_delay_pmos = 0.5
    alterparam W_delay_nmos = 0.36

    alterparam W_of_mirrors = 2.4
    alterparam W_of_input_mirror = 1.01
    alterparam vcontrol_par = 0.7
    reset
    *----------------------------------


    tran $t_step $t_stop $t_start
    *tran 't_step_par' 't_stop_par'

    print iteration
    echo W_delay_pmos = $w_next_var

    let w_next = w_next + increment
    let iteration = iteration + 1


    set appendwrite true
    write 3-stage_cs-vco_tb_WITH_APPENDWRITE.raw all


  end
*-------- END WHILE LOOP FOR VCTRL SWEEP-----------------
end $end the if do_dimensions_sweep = 1


.endc


*THESE WORK:
.meas tran Tvco_OUTSIDE_WHILE TRIG v(out) VAL=0.5*1.8 RISE=50 TARG v(out) VAL=0.5*1.8 RISE=51
*.meas tran Tvco_OUTSIDE_WHILE TRIG v(out) VAL=0.5*1.8 RISE=4 TARG v(out) VAL=0.5*1.8 RISE=5
.meas tran fvco_OUTSIDE_WHILE PARAM='1/Tvco_OUTSIDE_WHILE'
.meas tran Supply_current_rms_OUTSIDE_WHILE RMS i(vmeas_current_vdd) FROM=10e-9 TO=40e-9
.meas tran Ground_current_rms_OUTSIDE_WHILE RMS i(vmeas_current_gnd) FROM=10e-9 TO=40e-9
.meas tran vctrl_avg_OUTSIDE_WHILE AVG v(vctrl) FROM=10e-9 TO=20e-9
.meas tran vhigh_OUTSIDE_WHILE MAX v(out) FROM=10e-9 TO=20e-9
.meas tran vlow_OUTSIDE_WHILE MIN v(out) FROM=10e-9 TO=20e-9
.meas tran peak_to_peak_OUTSIDE_WHILE PARAM='vhigh_OUTSIDE_WHILE-vlow_OUTSIDE_WHILE'

.meas tran supply_current_rms RMS i(vmeas_current_vdd) FROM='t_start_par' TO='t_stop_par'

*IF NORMAL circuit: (couldn't wrap this inside an if)
 * .meas tran m26_current_rms RMS @m.x1.xm26.msky130_fd_pr__nfet_01v8[id] FROM='t_stop_par/2' TO='t_stop_par'
 * .meas tran m7_current_rms RMS @m.x1.xm7.msky130_fd_pr__nfet_01v8[id] FROM='t_stop_par/2' TO='t_stop_par'
*IF LVT circuit: (couldn't wrap this inside an if)
  *.meas tran m26_lvt_current_rms RMS @m.x1.xm26.msky130_fd_pr__nfet_01v8_lvt[id] FROM='t_stop_par/2'
+ TO='t_stop_par'
  *.meas tran m7_lvt_current_rms RMS @m.x1.xm7.msky130_fd_pr__nfet_01v8_lvt[id] FROM='t_stop_par/2' TO='t_stop_par'


**** end user architecture code
**.ends


*DUT:

*This is the FULL POST-LAYOUT netlist:
.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp7/3-stage_cs-vco_dp7.spice 


*These are netlists to debug the cap on which net degrades the speed (net10, net9, net8):
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_NET10_CAPS_COMMENTED_OUT.spice 
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_NET9_CAPS_COMMENTED_OUT.spice 
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_NET8_CAPS_COMMENTED_OUT.spice 
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_NET10_NET9_NET8_CAPS_COMMENTED_OUT.spice 
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_ALL_TOP_LEVEL_SUBCKT_CAPS_COMMENTED_OUT.spice 
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_ALL_CAPS_COMMENTED_OUT.spice 
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_ONLY_DELAY_CELL_TRANS_SUBCKT_CAPS_INSERTED.spice
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_ONLY_NET10_NET9_NET8_TOP_LEVEL_SUBCKT_CAPS_INSERTED.spice
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_ONLY_NET10_NET9_NET8_TOP_LEVEL_AND_TRANSISTOR_SUBCKT_CAPS_INSERTED.spice

*This is Layout with LI on delay cells, full extracted layout:
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_li/3-stage_cs-vco_dp5_li.spice

*This is Layout with LI on delay cells (v2 is with rotated FETs on delay cells, some more LI, etc), full extracted layout:
*.include /home/darunix/GitSandboxes/VCO/vco/mag/3-stage_cs-vco_dp5_li_v2/3-stage_cs-vco_dp5_li_v2.spice


* expanding   symbol:  fdiv2_loadmodel.sym # of pins=3
** sym_path: /home/darunix/GitSandboxes/VCO/vco/xschem/fdiv2_loadmodel.sym
** sch_path: /home/darunix/GitSandboxes/VCO/vco/xschem/fdiv2_loadmodel.sch
.subckt fdiv2_loadmodel  vdd clk vss
*.ipin clk
*.iopin vdd
*.iopin vss
XM3 vdd clk vdd vdd sky130_fd_pr__pfet_01v8 L=0.15 W=0.72 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29'
+ pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W'
+ sa=0 sb=0 sd=0 mult=1 m=1
XM4 vss clk vss vss sky130_fd_pr__nfet_01v8 L=0.15 W=0.36 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29'
+ pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W'
+ sa=0 sb=0 sd=0 mult=1 m=1
XM14 vss clk vss vss sky130_fd_pr__nfet_01v8 L=0.15 W=0.84 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29'
+ pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W'
+ sa=0 sb=0 sd=0 mult=1 m=1
XM9 vdd clk vdd vdd sky130_fd_pr__pfet_01v8 L=0.15 W=0.42 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29'
+ pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W'
+ sa=0 sb=0 sd=0 mult=1 m=1
.ends

.GLOBAL GND
.end