| |
| ////////////////////////////////////////////////////////////////////////////// |
| // SPDX-FileCopyrightText: 2021 , Dinesh Annayya |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // SPDX-License-Identifier: Apache-2.0 |
| // SPDX-FileContributor: Created by Dinesh Annayya <dinesha@opencores.org> |
| // |
| ////////////////////////////////////////////////////////////////////// |
| //// //// |
| //// integrated UART,I2C Master, SPU Master & USB1.1 Host //// |
| //// //// |
| //// //// |
| //// This file is part of the riscduino cores project //// |
| //// https://github.com/dineshannayya/riscduino.git //// |
| //// //// |
| //// Description: This module integarte Uart , I2C Master //// |
| //// SPI Master and USB 1.1 Host. //// |
| //// //// |
| //// //// |
| //// To Do: //// |
| //// nothing //// |
| //// //// |
| //// Author(s): //// |
| //// - Dinesh Annayya, dinesha@opencores.org //// |
| //// //// |
| //// Revision : //// |
| //// 0.2 - 7 April 2022, Dinesh-A //// |
| //// 2nd Uart Integrated //// |
| ////////////////////////////////////////////////////////////////////// |
| //// //// |
| //// Copyright (C) 2000 Authors and OPENCORES.ORG //// |
| //// //// |
| //// This source file may be used and distributed without //// |
| //// restriction provided that this copyright statement is not //// |
| //// removed from the file and that any derivative work contains //// |
| //// the original copyright notice and the associated disclaimer. //// |
| //// //// |
| //// This source file is free software; you can redistribute it //// |
| //// and/or modify it under the terms of the GNU Lesser General //// |
| //// Public License as published by the Free Software Foundation; //// |
| //// either version 2.1 of the License, or (at your option) any //// |
| //// later version. //// |
| //// //// |
| //// This source is distributed in the hope that it will be //// |
| //// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
| //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
| //// PURPOSE. See the GNU Lesser General Public License for more //// |
| //// details. //// |
| //// //// |
| //// You should have received a copy of the GNU Lesser General //// |
| //// Public License along with this source; if not, download it //// |
| //// from http://www.opencores.org/lgpl.shtml //// |
| //// //// |
| ////////////////////////////////////////////////////////////////////// |
| |
| module uart_i2c_usb_spi_top |
| |
| ( |
| `ifdef USE_POWER_PINS |
| input logic vccd1,// User area 1 1.8V supply |
| input logic vssd1,// User area 1 digital ground |
| `endif |
| // clock skew adjust |
| input logic [3:0] cfg_cska_uart, |
| input logic wbd_clk_int, |
| output logic wbd_clk_uart, |
| |
| input logic [1:0] uart_rstn , // async reset |
| input logic i2c_rstn , // async reset |
| input logic usb_rstn , // async reset |
| input logic spi_rstn , // async reset |
| input logic app_clk , |
| input logic usb_clk , // 48Mhz usb clock |
| |
| // Reg Bus Interface Signal |
| input logic reg_cs, |
| input logic reg_wr, |
| input logic [8:0] reg_addr, |
| input logic [31:0] reg_wdata, |
| input logic [3:0] reg_be, |
| |
| // Outputs |
| output logic [31:0] reg_rdata, |
| output logic reg_ack, |
| ///////////////////////////////////////////////////////// |
| // i2c interface |
| /////////////////////////////////////////////////////// |
| input logic scl_pad_i , // SCL-line input |
| output logic scl_pad_o , // SCL-line output (always 1'b0) |
| output logic scl_pad_oen_o , // SCL-line output enable (active low) |
| |
| input logic sda_pad_i , // SDA-line input |
| output logic sda_pad_o , // SDA-line output (always 1'b0) |
| output logic sda_padoen_o , // SDA-line output enable (active low) |
| |
| output logic i2cm_intr_o , |
| |
| // UART I/F |
| input logic [1:0] uart_rxd , |
| output logic [1:0] uart_txd , |
| |
| // USB 1.1 HOST I/F |
| input logic usb_in_dp , |
| input logic usb_in_dn , |
| |
| output logic usb_out_dp , |
| output logic usb_out_dn , |
| output logic usb_out_tx_oen , |
| |
| output logic usb_intr_o , |
| |
| // SPIM I/F |
| output logic sspim_sck, // clock out |
| output logic sspim_so, // serial data out |
| input logic sspim_si, // serial data in |
| output logic [3:0] sspim_ssn // cs_n |
| |
| ); |
| |
| // uart clock skew control |
| clk_skew_adjust u_skew_uart |
| ( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| .clk_in (wbd_clk_int ), |
| .sel (cfg_cska_uart ), |
| .clk_out (wbd_clk_uart ) |
| ); |
| |
| `define SEL_UART0 3'b000 |
| `define SEL_I2C 3'b001 |
| `define SEL_USB 3'b010 |
| `define SEL_SPI 3'b011 |
| `define SEL_UART1 3'b100 |
| |
| |
| |
| //---------------------------------------- |
| // Register Response Path Mux |
| // -------------------------------------- |
| logic [7:0] reg_uart0_rdata; |
| logic [7:0] reg_uart1_rdata; |
| logic [7:0] reg_i2c_rdata; |
| logic [31:0] reg_usb_rdata; |
| logic [31:0] reg_spim_rdata; |
| logic reg_uart0_ack; |
| logic reg_uart1_ack; |
| logic reg_i2c_ack; |
| logic reg_usb_ack; |
| logic reg_spim_ack; |
| |
| |
| assign reg_rdata = (reg_addr[8:6] == `SEL_UART0) ? {24'h0,reg_uart0_rdata} : |
| (reg_addr[8:6] == `SEL_UART1) ? {24'h0,reg_uart1_rdata} : |
| (reg_addr[8:6] == `SEL_I2C) ? {24'h0,reg_i2c_rdata} : |
| (reg_addr[8:6] == `SEL_USB) ? reg_usb_rdata : reg_spim_rdata; |
| assign reg_ack = (reg_addr[8:6] == `SEL_UART0) ? reg_uart0_ack : |
| (reg_addr[8:6] == `SEL_UART1) ? reg_uart1_ack : |
| (reg_addr[8:6] == `SEL_I2C) ? reg_i2c_ack : |
| (reg_addr[8:6] == `SEL_USB) ? reg_usb_ack : reg_spim_ack; |
| |
| wire reg_uart0_cs = (reg_addr[8:6] == `SEL_UART0) ? reg_cs : 1'b0; |
| wire reg_uart1_cs = (reg_addr[8:6] == `SEL_UART1) ? reg_cs : 1'b0; |
| wire reg_i2cm_cs = (reg_addr[8:6] == `SEL_I2C) ? reg_cs : 1'b0; |
| wire reg_usb_cs = (reg_addr[8:6] == `SEL_USB) ? reg_cs : 1'b0; |
| wire reg_spim_cs = (reg_addr[8:6] == `SEL_SPI) ? reg_cs : 1'b0; |
| |
| uart_core u_uart0_core ( |
| |
| .arst_n (uart_rstn[0] ), // async reset |
| .app_clk (app_clk ), |
| |
| // Reg Bus Interface Signal |
| .reg_cs (reg_uart0_cs ), |
| .reg_wr (reg_wr ), |
| .reg_addr (reg_addr[5:2] ), |
| .reg_wdata (reg_wdata[7:0] ), |
| .reg_be (reg_be[0] ), |
| |
| // Outputs |
| .reg_rdata (reg_uart0_rdata[7:0]), |
| .reg_ack (reg_uart0_ack ), |
| |
| // Pad Control |
| .rxd (uart_rxd[0] ), |
| .txd (uart_txd[0] ) |
| ); |
| |
| uart_core u_uart1_core ( |
| |
| .arst_n (uart_rstn[1] ), // async reset |
| .app_clk (app_clk ), |
| |
| // Reg Bus Interface Signal |
| .reg_cs (reg_uart1_cs ), |
| .reg_wr (reg_wr ), |
| .reg_addr (reg_addr[5:2] ), |
| .reg_wdata (reg_wdata[7:0] ), |
| .reg_be (reg_be[0] ), |
| |
| // Outputs |
| .reg_rdata (reg_uart1_rdata[7:0]), |
| .reg_ack (reg_uart1_ack ), |
| |
| // Pad Control |
| .rxd (uart_rxd[1] ), |
| .txd (uart_txd[1] ) |
| ); |
| |
| i2cm_top u_i2cm ( |
| // wishbone signals |
| .wb_clk_i (app_clk ), // master clock input |
| .sresetn (1'b1 ), // synchronous reset |
| .aresetn (i2c_rstn ), // asynchronous reset |
| .wb_adr_i (reg_addr[4:2] ), // lower address bits |
| .wb_dat_i (reg_wdata[7:0] ), // databus input |
| .wb_dat_o (reg_i2c_rdata ), // databus output |
| .wb_we_i (reg_wr ), // write enable input |
| .wb_stb_i (reg_i2cm_cs ), // stobe/core select signal |
| .wb_cyc_i (reg_i2cm_cs ), // valid bus cycle input |
| .wb_ack_o (reg_i2c_ack ), // bus cycle acknowledge output |
| .wb_inta_o (i2cm_intr_o ), // interrupt request signal output |
| |
| // I2C signals |
| // i2c clock line |
| .scl_pad_i (scl_pad_i ), // SCL-line input |
| .scl_pad_o (scl_pad_o ), // SCL-line output (always 1'b0) |
| .scl_padoen_o (scl_pad_oen_o ), // SCL-line output enable (active low) |
| |
| // i2c data line |
| .sda_pad_i (sda_pad_i ), // SDA-line input |
| .sda_pad_o (sda_pad_o ), // SDA-line output (always 1'b0) |
| .sda_padoen_o (sda_padoen_o ) // SDA-line output enable (active low) |
| |
| ); |
| |
| |
| usb1_host u_usb_host ( |
| .usb_clk_i (usb_clk ), |
| .usb_rstn_i (usb_rstn ), |
| |
| // USB D+/D- |
| .in_dp (usb_in_dp ), |
| .in_dn (usb_in_dn ), |
| |
| .out_dp (usb_out_dp ), |
| .out_dn (usb_out_dn ), |
| .out_tx_oen (usb_out_tx_oen), |
| |
| // Master Port |
| .wbm_rst_n (usb_rstn ), // Regular Reset signal |
| .wbm_clk_i (app_clk ), // System clock |
| .wbm_stb_i (reg_usb_cs ), // strobe/request |
| .wbm_adr_i (reg_addr[5:0]), // address |
| .wbm_we_i (reg_wr ), // write |
| .wbm_dat_i (reg_wdata ), // data output |
| .wbm_sel_i (reg_be ), // byte enable |
| .wbm_dat_o (reg_usb_rdata ), // data input |
| .wbm_ack_o (reg_usb_ack ), // acknowlegement |
| .wbm_err_o ( ), // error |
| |
| // Outputs |
| .usb_intr_o ( usb_intr_o ) |
| |
| ); |
| |
| sspim_top u_sspim ( |
| .clk (app_clk ), |
| .reset_n (spi_rstn ), |
| |
| |
| //--------------------------------- |
| // Reg Bus Interface Signal |
| //--------------------------------- |
| .reg_cs (reg_spim_cs ), |
| .reg_wr (reg_wr ), |
| .reg_addr (reg_addr ), |
| .reg_wdata (reg_wdata ), |
| .reg_be (reg_be ), |
| |
| // Outputs |
| .reg_rdata (reg_spim_rdata ), |
| .reg_ack (reg_spim_ack ), |
| |
| //------------------------------------------- |
| // Line Interface |
| //------------------------------------------- |
| |
| .sck (sspim_sck), // clock out |
| .so (sspim_so), // serial data out |
| .si (sspim_si), // serial data in |
| .ssn (sspim_ssn) // cs_n |
| |
| ); |
| |
| endmodule |
