blob: c23f68fbf6acf9f00ad9157fd8d4280d503cdfb1 [file] [log] [blame]
# Power nets
if { ! [info exists ::env(VDD_NET)] } {
set ::env(VDD_NET) $::env(VDD_PIN)
}
if { ! [info exists ::env(GND_NET)] } {
set ::env(GND_NET) $::env(GND_PIN)
}
set ::power_nets $::env(VDD_NET)
set ::ground_nets $::env(GND_NET)
if { [info exists ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS)] } {
if { $::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) == 1 } {
add_global_connection -net $::env(VDD_NET) -inst_pattern .* -pin_pattern {VPWR} -power
add_global_connection -net $::env(VDD_NET) -inst_pattern .* -pin_pattern {VPB} -power
add_global_connection -net $::env(GND_NET) -inst_pattern .* -pin_pattern {VGND} -ground
add_global_connection -net $::env(GND_NET) -inst_pattern .* -pin_pattern {VNB} -ground
}
}
set_voltage_domain -name CORE -power $::env(VDD_NET) -ground $::env(GND_NET)
# Assesses whether the deisgn is the core of the chip or not based on the
# value of $::env(DESIGN_IS_CORE) and uses the appropriate stdcell section
if { $::env(DESIGN_IS_CORE) == 1 } {
# Used if the design is the core of the chip
define_pdn_grid -name stdcell_grid -starts_with POWER -voltage_domain CORE -pins [subst {$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)}]
add_pdn_stripe -grid stdcell_grid -layer $::env(FP_PDN_LOWER_LAYER) -width $::env(FP_PDN_VWIDTH) -pitch $::env(FP_PDN_VPITCH) -offset $::env(FP_PDN_VOFFSET) -starts_with POWER
add_pdn_stripe -grid stdcell_grid -layer $::env(FP_PDN_UPPER_LAYER) -width $::env(FP_PDN_HWIDTH) -pitch $::env(FP_PDN_HPITCH) -offset $::env(FP_PDN_HOFFSET) -starts_with POWER
add_pdn_connect -grid stdcell_grid -layers [subst {$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)}]
} else {
# Used if the design is a macro in the core
define_pdn_grid -name stdcell_grid -starts_with POWER -voltage_domain CORE -pins $::env(FP_PDN_LOWER_LAYER)
add_pdn_stripe -grid stdcell_grid -layer $::env(FP_PDN_LOWER_LAYER) -width $::env(FP_PDN_VWIDTH) -pitch $::env(FP_PDN_VPITCH) -offset $::env(FP_PDN_VOFFSET) -starts_with POWER
}
# Adds the standard cell rails if enabled.
if { $::env(FP_PDN_ENABLE_RAILS) == 1 } {
add_pdn_stripe -grid stdcell_grid -layer $::env(FP_PDN_RAILS_LAYER) -width $::env(FP_PDN_RAIL_WIDTH) -followpins -starts_with POWER
add_pdn_connect -grid stdcell_grid -layers [subst {$::env(FP_PDN_RAILS_LAYER) $::env(FP_PDN_LOWER_LAYER)}]
}
# Adds the core ring if enabled.
if { $::env(FP_PDN_CORE_RING) == 1 } {
add_pdn_ring -grid stdcell_grid -layer [subst {$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)}] \
-widths [subst {$::env(FP_PDN_CORE_RING_VWIDTH) $::env(FP_PDN_CORE_RING_HWIDTH)}] \
-spacings [subst {$::env(FP_PDN_CORE_RING_VSPACING) $::env(FP_PDN_CORE_RING_HSPACING)}] \
-core_offset [subst {$::env(FP_PDN_CORE_RING_VOFFSET) $::env(FP_PDN_CORE_RING_HOFFSET)}]
}
# A general macro that follows the premise of the set heirarchy. You may want to modify this or add other macro configs
# The macro power pin names are assumed to match the VDD and GND net names
# TODO: parameterize the power pin names
set macro {
orient {R0 R180 MX MY R90 R270 MXR90 MYR90}
power_pins $::env(VDD_NET)
ground_pins $::env(GND_NET)
blockages "li1 met1 met2 met3 met4"
straps {
}
connect {{$::env(FP_PDN_LOWER_LAYER)_PIN_ver $::env(FP_PDN_UPPER_LAYER)}}
}
if { $::env(FP_PDN_ENABLE_MACROS_GRID) == 1} {
if { [llength $::env(FP_PDN_MACROS)] > 0 } {
# generate automatically per instance:
foreach macro_instance $::env(FP_PDN_MACROS) {
set macro_instance_grid [subst $macro]
dict append $macro_instance_grid instance $macro_instance
set ::halo [list $::env(FP_HORIZONTAL_HALO) $::env(FP_VERTICAL_HALO)]
pdngen::specify_grid macro [subst $macro_instance_grid]
}
} else {
set ::halo [list $::env(FP_HORIZONTAL_HALO) $::env(FP_VERTICAL_HALO)]
pdngen::specify_grid macro [subst $macro]
}
# CAN NOT ENABLE THE TCL COMMAND BECAUSE THERE IS NO ARGUMENT FOR SPECIFYING THE POWER AND GROUND PIN NAMES ON THE MACRO
# define_pdn_grid -macro -orient {R0 R180 MX MY R90 R270 MXR90 MYR90} -grid_over_pg_pins -starts_with POWER -pin_direction vertical -halo [subst {$::env(FP_HORIZONTAL_HALO) $::env(FP_VERTICAL_HALO)}]
# add_pdn_connect -layers [subst {$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)}]
} else {
define_pdn_grid -macro -orient {R0 R180 MX MY R90 R270 MXR90 MYR90} -grid_over_pg_pins -starts_with POWER -halo [subst {$::env(FP_HORIZONTAL_HALO) $::env(FP_VERTICAL_HALO)}]
}
# POWER or GROUND #Std. cell rails starting with power or ground rails at the bottom of the core area
set ::rails_start_with "POWER" ;
# POWER or GROUND #Upper metal stripes starting with power or ground rails at the left/bottom of the core area
set ::stripes_start_with "POWER" ;