diff --git a/verilog/dv/mprj_stimulus/Makefile b/verilog/dv/mprj_stimulus/Makefile
deleted file mode 100644
index 3fd0b56..0000000
--- a/verilog/dv/mprj_stimulus/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-FileCopyrightText: 2020 Efabless Corporation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-
-
- 
-PWDD := $(shell pwd)
-BLOCKS := $(shell basename $(PWDD))
-
-# ---- Include Partitioned Makefiles ----
-
-CONFIG = caravel_user_project
-
-
-include $(MCW_ROOT)/verilog/dv/make/env.makefile
-include $(MCW_ROOT)/verilog/dv/make/var.makefile
-include $(MCW_ROOT)/verilog/dv/make/cpu.makefile
-include $(MCW_ROOT)/verilog/dv/make/sim.makefile
-
-
diff --git a/verilog/dv/mprj_stimulus/mprj_stimulus.c b/verilog/dv/mprj_stimulus/mprj_stimulus.c
deleted file mode 100644
index d049848..0000000
--- a/verilog/dv/mprj_stimulus/mprj_stimulus.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2020 Efabless Corporation
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- * SPDX-License-Identifier: Apache-2.0
- */
-
-// This include is relative to $CARAVEL_PATH (see Makefile)
-#include <defs.h>
-
-// --------------------------------------------------------
-
-void main()
-{
-    // The upper GPIO pins are configured to be output
-    // and accessble to the management SoC.
-    // Used to flag the start/end of a test
-    // The lower GPIO pins are configured to be output
-    // and accessible to the user project.  They show
-    // the project count value, although this test is
-    // designed to read the project count through the
-    // logic analyzer probes.
-    // I/O 6 is configured for the UART Tx line
-
-    uint32_t testval;
-
-    reg_mprj_datal = 0x00000000;
-    reg_mprj_datah = 0x00000000;
-
-    reg_mprj_io_37 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_36 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_35 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_34 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_33 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_32 = GPIO_MODE_MGMT_STD_OUTPUT;
-
-    reg_mprj_io_31 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_30 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_29 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_28 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_27 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_26 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_25 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_24 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_23 = GPIO_MODE_MGMT_STD_OUTPUT; 
-    reg_mprj_io_22 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_21 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_20 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_19 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_18 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_17 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_16 = GPIO_MODE_MGMT_STD_OUTPUT;
-
-    reg_mprj_io_15 = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_14 = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_13 = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_12 = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_11 = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_10 = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_9  = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_8  = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_7  = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_6  = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_5  = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_4  = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_3  = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_2  = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_1  = GPIO_MODE_USER_STD_OUT_MONITORED;
-    reg_mprj_io_0  = GPIO_MODE_USER_STD_OUT_MONITORED;
-
-    /* Apply configuration */
-    reg_mprj_xfer = 1;
-    while (reg_mprj_xfer == 1);
-
-    /* TEST:  Recast channels 35 to 32 to allow input to user project	*/
-    /* This is done locally only:  Do not run reg_mprj_xfer!		*/
-    reg_mprj_io_35 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_34 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_33 = GPIO_MODE_MGMT_STD_OUTPUT;
-    reg_mprj_io_32 = GPIO_MODE_MGMT_STD_OUTPUT;
-
-    // Configure LA probes [31:0], [127:64] as inputs to the cpu
-    // Configure LA probes [63:32] as outputs from the cpu
-    reg_la0_oenb = reg_la0_iena = 0x00000000;    // [31:0]
-	reg_la1_oenb = reg_la1_iena = 0xFFFFFFFF;    // [63:32]
-	reg_la2_oenb = reg_la2_iena = 0x00000000;    // [95:64]
-	reg_la3_oenb = reg_la3_iena = 0x00000000;    // [127:96]
-
-    // Flag start of the test
-    reg_mprj_datal = 0xAB400000;
-
-    // Set Counter value to zero through LA probes [63:32]
-    reg_la1_data = 0x00000000;
-
-    // Configure LA probes from [63:32] as inputs to disable counter write
-    reg_la1_oenb = reg_la1_iena = 0x00000000; 
-
-    reg_mprj_datal = 0xAB410000;
-    reg_mprj_datah = 0x00000000;
-
-    // Test ability to force data on channel 37
-    // NOTE:  Only the low 6 bits of reg_mprj_datah are meaningful
-
-    reg_mprj_datah = 0x0f0f0fc0;
-    reg_mprj_datah = 0x00000000;
-    reg_mprj_datah = 0x0f0f0fca;
-    reg_mprj_datah = 0x0000000a;
-    reg_mprj_datah = 0x0f0f0fc0;
-    reg_mprj_datah = 0x00000000;
-    reg_mprj_datah = 0x0f0f0fc5;
-    reg_mprj_datah = 0x00000005;
-
-    // Test ability to read back data generated by the user project
-    // on the "monitored" outputs.  Read from the lower 16 bits and
-    // copy the value to the upper 16 bits.
-
-    testval = reg_mprj_datal;
-    reg_mprj_datal = (testval << 16);
-    testval = reg_mprj_datal;
-    reg_mprj_datal = (testval << 16);
-
-    // Flag end of the test
-    reg_mprj_datal = 0xAB510000;
-}
diff --git a/verilog/dv/mprj_stimulus/mprj_stimulus_tb.v b/verilog/dv/mprj_stimulus/mprj_stimulus_tb.v
deleted file mode 100644
index 68addd0..0000000
--- a/verilog/dv/mprj_stimulus/mprj_stimulus_tb.v
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-FileCopyrightText: 2020 Efabless Corporation
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//      http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-// SPDX-License-Identifier: Apache-2.0
-
-`default_nettype wire
-
-`timescale 1 ns / 1 ps
-
-module mprj_stimulus_tb;
-    // Signals declaration
-    reg clock;
-    reg RSTB;
-    reg power1, power2;
-    reg CSB;
-    wire gpio;
-    wire [37:0] mprj_io;
-    wire [15:0] checkbits;
-    wire [3:0] status;
-
-    // Signals Assignment
-    assign checkbits  = mprj_io[31:16];
-    assign status = mprj_io[35:32];
-
-    assign mprj_io[3] = (CSB == 1'b1) ? 1'b1 : 1'bz;
-
-    always #12.5 clock <= (clock === 1'b0);
-
-    initial begin
-        clock = 0;
-    end
-
-    initial begin
-        $dumpfile("mprj_stimulus.vcd");
-        $dumpvars(0, mprj_stimulus_tb);
-
-        // Repeat cycles of 1000 clock edges as needed to complete testbench
-        repeat (100) begin
-            repeat (1000) @(posedge clock);
-        end
-        $display("%c[1;31m",27);
-        `ifdef GL
-			$display ("Monitor: Timeout, Test Project IO Stimulus (GL) Failed");
-		`else
-			$display ("Monitor: Timeout, Test Project IO Stimulus (RTL) Failed");
-		`endif
-        $display("%c[0m",27);
-        $finish;
-    end
-
-    initial begin
-        wait(checkbits == 16'hAB40);
-        $display("Monitor: mprj_stimulus test started");
-        wait(status == 4'ha);
-        wait(status == 4'h5);
-
-	// Values reflect copying user-controlled outputs to memory and back
-	// to management-controlled outputs.
-        wait(checkbits == 16'h1968 || checkbits == 16'h1969); // They're off because the difference between GL and RTL
-        wait(checkbits == 16'h1DCD || checkbits == 16'h1DCE); // They're off because the difference between GL and RTL
-
-        wait(checkbits == 16'hAB51);
-        $display("Monitor: mprj_stimulus test Passed");
-        #10000;
-        $finish;
-    end
-
-    // Reset Operation
-    initial begin
-        CSB <= 1'b1;		
-        RSTB <= 1'b0;
-        #2000;
-        RSTB <= 1'b1;       	// Release reset
-        #1000000;
-        CSB <= 1'b0;		// Stop driving CSB
-    end
-
-    initial begin		// Power-up sequence
-        power1 <= 1'b0;
-        power2 <= 1'b0;
-        #200;
-        power1 <= 1'b1;
-        #200;
-        power2 <= 1'b1;
-    end
-
-    wire flash_csb;
-    wire flash_clk;
-    wire flash_io0;
-    wire flash_io1;
-
-    wire VDD3V3 = power1;
-    wire VDD1V8 = power2;
-    wire VSS = 1'b0;
-
-    caravel uut (
-        .vddio	  (VDD3V3),
-		.vddio_2  (VDD3V3),
-		.vssio	  (VSS),
-		.vssio_2  (VSS),
-		.vdda	  (VDD3V3),
-		.vssa	  (VSS),
-		.vccd	  (VDD1V8),
-		.vssd	  (VSS),
-		.vdda1    (VDD3V3),
-		.vdda1_2  (VDD3V3),
-		.vdda2    (VDD3V3),
-		.vssa1	  (VSS),
-		.vssa1_2  (VSS),
-		.vssa2	  (VSS),
-		.vccd1	  (VDD1V8),
-		.vccd2	  (VDD1V8),
-		.vssd1	  (VSS),
-		.vssd2	  (VSS),
-		.clock    (clock),
-		.gpio     (gpio),
-		.mprj_io  (mprj_io),
-		.flash_csb(flash_csb),
-		.flash_clk(flash_clk),
-		.flash_io0(flash_io0),
-		.flash_io1(flash_io1),
-		.resetb	  (RSTB)
-    );
-
-
-    spiflash #(
-        .FILENAME("mprj_stimulus.hex")
-    ) spiflash (
-        .csb(flash_csb),
-        .clk(flash_clk),
-        .io0(flash_io0),
-        .io1(flash_io1),
-        .io2(),         // not used
-        .io3()          // not used
-    );
-
-endmodule
-`default_nettype wire
\ No newline at end of file