module spi_mod
(
`ifdef USE_POWER_PINS
    inout vccd1,	// User area 1 1.8V supply
    inout vssd1,	// User area 1 digital ground
`endif
  input wire clock,
  input wire enable_sn,
  input wire sclk,
  input wire mosi,
  input wire ss_n,
  output wire miso,
  input wire data_valid_n,
  output wire [31:0] data_out,
  input wire [31:0] data_in
);


  /*always@(*)
  begin
    case({ss_n,data_ready_n})
      2'b00: data_sig <= {data_reg,mosi};
      2'b01: data_sig <= {data_reg,mosi};
      2'b10: data_sig <= data_in;
      2'b11: data_sig <= {miso,data_reg};
    endcase
  end

  always@(posedge sclk, negedge data_valid_n)
  begin
    if(data_valid_n == 1'b0)
	   {miso,data_reg} <= data_in;
	 else
      {miso,data_reg} <= data_sig;
  end
  */
/*
  always@(posedge sclk , negedge data_valid_n)
  begin
    if(data_valid_n)
    begin
      if(ss_n)
      begin
       {miso,data_reg} <= {miso,data_reg};
      end
      else
      begin
       {miso,data_reg} <= {data_reg,mosi};
      end
    end
    else
    begin
      {miso,data_reg} <= data_in; 
    end
  end
*/
  //assign data_out = {miso,data_reg};

  reg [2:0] sclk_reg;
  reg [2:0] ss_n_reg;
  reg [2:0] mosi_reg;
  reg [31:0] spi_data;
  wire sclk_rising_edge;
  //wire sclk_falling_edge;
  wire ss_n_enable;
  wire mosi_data;

  always@(posedge clock)
    sclk_reg <= {sclk_reg[1:0],sclk};

  always@(posedge clock)
    ss_n_reg <= {ss_n_reg[1:0],ss_n};

  always@(posedge clock)
    mosi_reg <= {mosi_reg[1:0],mosi};
    
  assign sclk_rising_edge = (sclk_reg[2:1] == 2'b01);
  //assign sclk_falling_edge = (sclk_reg[1:0] == 2'b10);
  assign ss_n_enable = (ss_n_reg[2:1] == 3'b11);
  assign mosi_data = (mosi_reg[2:1] == 3'b11);

/*
  always@(posedge clock)
  begin
    if(~enable_sn)
    begin
      spi_data = 32'b0;
    end
    else
    begin
      if(~ss_n_enable)
      begin
        if(sclk_rising_edge)
        begin
          spi_data <= {spi_data[31:1],mosi_data};
        end
        else
        begin
          if(~data_valid_n)
          begin
            spi_data <= data_in;
          end
          else
          begin
            spi_data <= spi_data;
          end
        end
      end
      else
      begin
        spi_data = 32'b0;
      end
    end
  end
*/
  always@(posedge clock)
  begin
    case({enable_sn,ss_n_enable,data_valid_n})
      3'b000: spi_data <= sclk_rising_edge ? {spi_data[30:0],mosi_data} : spi_data;
      3'b001: spi_data <= sclk_rising_edge ? {spi_data[30:0],mosi_data} : spi_data;
      3'b001: spi_data <= sclk_rising_edge ? {spi_data[30:0],mosi_data} : spi_data;
      3'b010: spi_data <= data_in;
      3'b011: spi_data <= spi_data;
      default: spi_data <= 32'hDEADBEEF;
    endcase
  end


  assign data_out = spi_data;
  assign miso = spi_data[31];


endmodule