# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0

set script_dir [file dirname [file normalize [info script]]]

set ::env(DESIGN_NAME) digitalcore_macro

set ::env(VERILOG_FILES) "\
	$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
	$script_dir/../../ip/randsack/rtl/digitalcore_macro.v \
	$script_dir/../../ip/third_party/picorv32_wb/gpio32_wb.v \
	$script_dir/../../ip/third_party/picorv32_wb/simpleuart_div16_wb.v \
	$script_dir/../../ip/third_party/verilog-wishbone/rtl/wb_mux_4.v \
	$script_dir/../../ip/randsack/rtl/ring_control.v"

set ::env(DESIGN_IS_CORE) 0

set ::env(SDC_FILE) "$script_dir/base.sdc"
set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"

# NOTE: Make sure to add all clocks manually to base.sdc!
set ::env(CLOCK_PORT) "wb_clk_i ring0_clk ring1_clk"
set ::env(CLOCK_PERIOD) "15"

# Try to minimize fanout to fix slew violations.
# set ::env(SYNTH_MAX_FANOUT) 4
# set ::env(CLOCK_BUFFER_FANOUT) 14

set ::env(FP_SIZING) absolute
set ::env(DIE_AREA) "0 0 500 500"

set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg

# set ::env(PL_TIME_DRIVEN) 1
set ::env(PL_TARGET_DENSITY) 0.4

# Maximum layer used for routing is metal 4.
# This is because this macro will be inserted in a top level (user_project_wrapper)
# where the PDN is planned on metal 5. So, to avoid having shorts between routes
# in this macro and the top level metal 5 stripes, we have to restrict routes to metal4.
set ::env(GLB_RT_MAXLAYER) 5

# You can draw more power domains if you need to
set ::env(VDD_NETS) [list {vccd1}]
set ::env(GND_NETS) [list {vssd1}]

set ::env(DIODE_INSERTION_STRATEGY) 4
# If you're going to use multiple power domains, then disable cvc run.
set ::env(RUN_CVC) 1

set ::env(ROUTING_CORES) 10