Add a template README
diff --git a/CARAVEL_UPRJ.md b/CARAVEL_UPRJ.md
new file mode 100644
index 0000000..e069246
--- /dev/null
+++ b/CARAVEL_UPRJ.md
@@ -0,0 +1,177 @@
+<!---
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+-->
+
+# Caravel User Project
+[](https://opensource.org/licenses/Apache-2.0) [](https://github.com/efabless/caravel_project_example/actions/workflows/user_project_ci.yml) [](https://github.com/efabless/caravel_project_example/actions/workflows/caravel_build.yml)
+
+# Table of contents
+- [Overview](#overview)
+- [Install Caravel](#install-caravel)
+- [Caravel Integration](#caravel-integration)
+ - [Repo Integration](#repo-integration)
+ - [Verilog Integration](#verilog-integration)
+- [Running Full Chip Simulation](#running-full-chip-simulation)
+- [Hardening the User Project Macro using Openlane](#hardening-the-user-project-macro-using-openlane)
+- [Checklist for Open-MPW Submission](#checklist-for-open-mpw-submission)
+
+# Overview
+
+This repo contains a sample user project that utilizes the [caravel](https://github.com/efabless/caravel.git) chip user space. The user project is a simple counter that showcases how to make use of [caravel's](https://github.com/efabless/caravel.git) user space utilities like IO pads, logic analyzer probes, and wishbone port. The repo also demonstrates the recommended structure for the open-mpw shuttle projects.
+
+# Install Caravel
+
+To setup caravel, run the following:
+
+```bash
+# By default, CARAVEL_ROOT is set to $(pwd)/caravel
+# If you want to install caravel at a different location, run "export CARAVEL_ROOT=<caravel-path>"
+# Disable submodule installation if needed by, run "export SUBMODULE=0"
+
+make install
+```
+
+To update the installed caravel to the latest, run:
+
+```bash
+ make update_caravel
+```
+
+To remove caravel, run
+```bash
+make uninstall
+```
+
+By default [caravel-lite](https://github.com/efabless/caravel-lite.git) is installed. To install the full version of caravel, run this prior to calling make install.
+```bash
+export CARAVEL_LITE=0
+```
+
+# Caravel Integration
+
+## Repo Integration
+
+Caravel files are kept separate from the user project by having caravel as submodule. The submodule commit should point to the latest of caravel/caravel-lite master. The following files should have a symbolic link to [caravel's](https://github.com/efabless/caravel.git) corresponding files:
+
+- [Openlane Makefile](openlane/Makefile): This provides an easier way for running openlane to harden your macros. Refer to
+[Hardening the User Project Macro using Openlane](#hardening-the-user-project-macro-using-openlane). Also, the makefile retains the openlane summary reports under the signoff directory.
+
+- [Pin order](openlane/user_project_wrapper/pin_order.cfg) file for the user wrapper: The hardened user project wrapper macro must have the same pin order specified in caravel's repo. Failing to adhere to the same order will fail the gds integration of the macro with caravel's back-end.
+
+The symbolic links are automatically set when you run `make install`.
+
+## Verilog Integration
+
+You need to create a wrapper around your macro that adheres to the template at [user_project_wrapper](caravel/verilog/rtl/__user_project_wrapper.v). The wrapper top module must be named `user_project_wrapper` and must have the same input and output ports. The wrapper gives access to the user space utilities provided by caravel like IO ports, logic analyzer probes, and wishbone bus connection to the management SoC.
+
+For this sample project, the user macro makes use of:
+
+- The IO ports for displaying the count register values on the IO pads.
+
+- The LA probes for supplying an optional reset and clock signals and for setting an initial value for the count register.
+
+- The wishbeone port for reading/writing the count value through the management SoC.
+
+Refer to [user_project_wrapper](verilog/rtl/user_project_wrapper.v) for more information.
+
+<p align=”center”>
+<img src="docs/source/_static/counter_32.png" width="50%" height="10%">
+</p>
+
+# Running Full Chip Simulation
+
+First, you will need to install the simulation environment, by
+
+```bash
+make simenv
+```
+
+This will pull a docker image with the needed tools installed.
+
+Then, you will need to build the pdk to obtain the verilog views.
+
+```bash
+export PDK_ROOT=<pdk-installation-path>
+make pdk
+```
+
+Then, run the RTL and GL simulation by
+
+```bash
+export PDK_ROOT=<pdk-installation-path>
+export CARAVEL_ROOT=$(pwd)/caravel
+# specify simulation mode: RTL/GL
+export SIM=RTL
+# Run IO ports testbench, make verify-io_ports
+make verify-<dv-pattern>
+```
+
+The verilog test-benches are under this directory [verilog/dv](verilog/dv). For more information on setting up the simulation environment and the available testbenches for this sample project, refer to [README](verilog/dv/README.md).
+
+# Hardening the User Project Macro using Openlane
+
+First, you will need to install the pdk by
+
+```bash
+export PDK_ROOT=<pdk-installation-path>
+make pdk
+```
+
+Then, you will need to install openlane by
+
+```bash
+export OPENLANE_ROOT=<openlane-installation-path>
+export OPENLANE_TAG=v0.12
+make openlane
+```
+
+For detailed instructions on how to install openlane and the pdk refer to [README](https://github.com/efabless/openlane/blob/master/README.md).
+
+
+There are two options for hardening the user project macro using openlane:
+
+1. Hardening the user macro, then embedding it in the wrapper
+2. Flattening the user macro with the wrapper.
+
+For more details on this, refer to this [README](caravel/blob/master/openlane/README.rst).
+
+For this sample project, we went for the first option where the user macro is hardened first, then it is inserted in the user project wrapper.
+
+<p align=”center”>
+<img src="docs/source/_static/wrapper.png" width="30%" height="5%">
+</p>
+
+To reproduce hardening this project, run the following:
+
+```bash
+export OPENLANE_TAG=v0.12
+# Run openlane to harden user_proj_example
+make user_proj_example
+# Run openlane to harden user_project_wrapper
+make user_project_wrapper
+```
+
+# Checklist for Open-MPW Submission
+
+- [x] The project repo adheres to the same directory structure in this repo.
+- [x] The project repo contain info.yaml at the project root.
+- [x] Top level macro is named `user_project_wrapper`.
+- [x] Full Chip Simulation passes for RTL and GL (gate-level)
+- [x] The hardened Macros are LVS and DRC clean
+- [x] The hardened `user_project_wrapper` adheres to the same pin order specified at [pin_order](https://github.com/efabless/caravel/blob/master/openlane/user_project_wrapper_empty/pin_order.cfg)
+- [x] XOR check passes with zero total difference.
+- [x] Openlane summary reports are retained under ./signoff/<macro-name>
diff --git a/README.md b/README.md
index 04a31b8..76e9691 100644
--- a/README.md
+++ b/README.md
@@ -1,177 +1,14 @@
-<!---
-# SPDX-FileCopyrightText: 2020 Efabless Corporation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
--->
-
# Caravel User Project
+
[](https://opensource.org/licenses/Apache-2.0) [](https://github.com/efabless/caravel_project_example/actions/workflows/user_project_ci.yml) [](https://github.com/efabless/caravel_project_example/actions/workflows/caravel_build.yml)
-# Table of contents
-- [Overview](#overview)
-- [Install Caravel](#install-caravel)
-- [Caravel Integration](#caravel-integration)
- - [Repo Integration](#repo-integration)
- - [Verilog Integration](#verilog-integration)
-- [Running Full Chip Simulation](#running-full-chip-simulation)
-- [Hardening the User Project Macro using Openlane](#hardening-the-user-project-macro-using-openlane)
-- [Checklist for Open-MPW Submission](#checklist-for-open-mpw-submission)
-
-# Overview
+---
+**NOTE**
-This repo contains a sample user project that utilizes the [caravel](https://github.com/efabless/caravel.git) chip user space. The user project is a simple counter that showcases how to make use of [caravel's](https://github.com/efabless/caravel.git) user space utilities like IO pads, logic analyzer probes, and wishbone port. The repo also demonstrates the recommended structure for the open-mpw shuttle projects.
+Fill this README with your caravel project documentation.
-# Install Caravel
+---
-To setup caravel, run the following:
+# Sample User Project
-```bash
-# By default, CARAVEL_ROOT is set to $(pwd)/caravel
-# If you want to install caravel at a different location, run "export CARAVEL_ROOT=<caravel-path>"
-# Disable submodule installation if needed by, run "export SUBMODULE=0"
-
-make install
-```
-
-To update the installed caravel to the latest, run:
-
-```bash
- make update_caravel
-```
-
-To remove caravel, run
-```bash
-make uninstall
-```
-
-By default [caravel-lite](https://github.com/efabless/caravel-lite.git) is installed. To install the full version of caravel, run this prior to calling make install.
-```bash
-export CARAVEL_LITE=0
-```
-
-# Caravel Integration
-
-## Repo Integration
-
-Caravel files are kept separate from the user project by having caravel as submodule. The submodule commit should point to the latest of caravel/caravel-lite master. The following files should have a symbolic link to [caravel's](https://github.com/efabless/caravel.git) corresponding files:
-
-- [Openlane Makefile](openlane/Makefile): This provides an easier way for running openlane to harden your macros. Refer to
-[Hardening the User Project Macro using Openlane](#hardening-the-user-project-macro-using-openlane). Also, the makefile retains the openlane summary reports under the signoff directory.
-
-- [Pin order](openlane/user_project_wrapper/pin_order.cfg) file for the user wrapper: The hardened user project wrapper macro must have the same pin order specified in caravel's repo. Failing to adhere to the same order will fail the gds integration of the macro with caravel's back-end.
-
-The symbolic links are automatically set when you run `make install`.
-
-## Verilog Integration
-
-You need to create a wrapper around your macro that adheres to the template at [user_project_wrapper](caravel/verilog/rtl/__user_project_wrapper.v). The wrapper top module must be named `user_project_wrapper` and must have the same input and output ports. The wrapper gives access to the user space utilities provided by caravel like IO ports, logic analyzer probes, and wishbone bus connection to the management SoC.
-
-For this sample project, the user macro makes use of:
-
-- The IO ports for displaying the count register values on the IO pads.
-
-- The LA probes for supplying an optional reset and clock signals and for setting an initial value for the count register.
-
-- The wishbeone port for reading/writing the count value through the management SoC.
-
-Refer to [user_project_wrapper](verilog/rtl/user_project_wrapper.v) for more information.
-
-<p align=”center”>
-<img src="docs/source/_static/counter_32.png" width="50%" height="10%">
-</p>
-
-# Running Full Chip Simulation
-
-First, you will need to install the simulation environment, by
-
-```bash
-make simenv
-```
-
-This will pull a docker image with the needed tools installed.
-
-Then, you will need to build the pdk to obtain the verilog views.
-
-```bash
-export PDK_ROOT=<pdk-installation-path>
-make pdk
-```
-
-Then, run the RTL and GL simulation by
-
-```bash
-export PDK_ROOT=<pdk-installation-path>
-export CARAVEL_ROOT=$(pwd)/caravel
-# specify simulation model: RTL/GL
-export SIM=RTL
-# Run IO ports testbench, make verify-io_ports
-make verify-<dv-pattern>
-```
-
-The verilog test-benches are under this directory [verilog/dv](verilog/dv). For more information on setting up the simulation environment and the available testbenches for this sample project, refer to [README](verilog/dv/README.md).
-
-# Hardening the User Project Macro using Openlane
-
-First, you will need to install the pdk by
-
-```bash
-export PDK_ROOT=<pdk-installation-path>
-make pdk
-```
-
-Then, you will need to install openlane by
-
-```bash
-export OPENLANE_ROOT=<openlane-installation-path>
-export OPENLANE_TAG=v0.12
-make openlane
-```
-
-For detailed instructions on how to install openlane and the pdk refer to [README](https://github.com/efabless/openlane/blob/master/README.md).
-
-
-There are two options for hardening the user project macro using openlane:
-
-1. Hardening the user macro, then embedding it in the wrapper
-2. Flattening the user macro with the wrapper.
-
-For more details on this, refer to this [README](caravel/blob/master/openlane/README.rst).
-
-For this sample project, we went for the first option where the user macro is hardened first, then it is inserted in the user project wrapper.
-
-<p align=”center”>
-<img src="docs/source/_static/wrapper.png" width="30%" height="5%">
-</p>
-
-To reproduce hardening this project, run the following:
-
-```bash
-export OPENLANE_TAG=v0.12
-# Run openlane to harden user_proj_example
-make user_proj_example
-# Run openlane to harden user_project_wrapper
-make user_project_wrapper
-```
-
-# Checklist for Open-MPW Submission
-
-- [x] The project repo adheres to the same directory structure in this repo.
-- [x] The project repo contain info.yaml at the project root.
-- [x] Top level macro is named `user_project_wrapper`.
-- [x] Full Chip Simulation passes for RTL and GL (gate-level)
-- [x] The hardened Macros are LVS and DRC clean
-- [x] The hardened `user_project_wrapper` adheres to the same pin order specified at [pin_order](https://github.com/efabless/caravel/blob/master/openlane/user_project_wrapper_empty/pin_order.cfg)
-- [x] XOR check passes with zero total difference.
-- [x] Openlane summary reports are retained under ./signoff/<macro-name>
+Refer to [CARAVEL_UPRJ](CARAVEL_UPRJ.md) for this sample project documentation.
\ No newline at end of file
