diff --git a/verilog/dv/wb_openram/wb_openram.c b/verilog/dv/wb_openram/wb_openram.c
index 589f1fe..090a44d 100644
--- a/verilog/dv/wb_openram/wb_openram.c
+++ b/verilog/dv/wb_openram/wb_openram.c
@@ -22,38 +22,38 @@
 // Caravel allows user project to use 0x30xx_xxxx address space on Wishbone bus
 // OpenRAM
 // 0x30c0_0000 till 30c0_03ff -> 256 Words of OpenRAM (1024 Bytes)
-#define OPENRAM_BASE_ADDRESS	0x30c00000
+#define OPENRAM_BASE_ADDRESS		0x30c00000
 #define OPENRAM_SIZE_DWORDS		256ul			
 #define OPENRAM_SIZE_BYTES		(4ul * OPENRAM_SIZE_DWORDS)
-#define OPENRAM_ADDRESS_MASK	(OPENRAM_SIZE_BYTES - 1)
+#define OPENRAM_ADDRESS_MASK		(OPENRAM_SIZE_BYTES - 1)
 #define OPENRAM_MEM(offset)		(*(volatile uint32_t*)(OPENRAM_BASE_ADDRESS + (offset & OPENRAM_ADDRESS_MASK)))
 
 // Caravel allows user project to use 0x30xx_xxxx address space on Wishbone bus
 // HyperRAM has 8MB -> mask is 0x007fffff
 // 0x3000_0000 till 307f_ffff -> RAM / MEM inisde chip
 #define hyperram_mem_base_address	0x30000000
-#define hyperram_mem_mask			0x007fffff
+#define hyperram_mem_mask		0x007ffffc
 #define hyperram_mem(offset)		(*(volatile uint32_t*)(hyperram_mem_base_address + (offset & hyperram_mem_mask)))
 // 0x3080_00xx -> register space inside chip
 #define hyperram_reg_base_address	0x30800000
-#define hyperram_reg_mask			0x0000ffff
-#define hyperram_reg(num)			(*(volatile uint32_t*)(hyperram_reg_base_address + ((2 * num) & hyperram_reg_mask)))
+#define hyperram_reg_mask		0x0000ffff
+#define hyperram_reg(num)		(*(volatile uint32_t*)(hyperram_reg_base_address + ((2 * num) & hyperram_reg_mask)))
 // 0x3081_00xx -> CSR space for driver / peripheral configuration
 #define hyperram_csr_base_address	0x30810000
 #define hyperram_csr_mask			0x0000ffff
 #define hyperram_csr_latency		(*(volatile uint32_t*)(hyperram_csr_base_address + 0x00))
 #define hyperram_csr_tpre_tpost		(*(volatile uint32_t*)(hyperram_csr_base_address + 0x04))
-#define hyperram_csr_tcsh			(*(volatile uint32_t*)(hyperram_csr_base_address + 0x08))
-#define hyperram_csr_trmax			(*(volatile uint32_t*)(hyperram_csr_base_address + 0x0c))
-#define hyperram_csr_status			(*(volatile uint32_t*)(hyperram_csr_base_address + 0x10))
+#define hyperram_csr_tcsh		(*(volatile uint32_t*)(hyperram_csr_base_address + 0x08))
+#define hyperram_csr_trmax		(*(volatile uint32_t*)(hyperram_csr_base_address + 0x0c))
+#define hyperram_csr_status		(*(volatile uint32_t*)(hyperram_csr_base_address + 0x10))
 
 
 // Generates 32bits wide value out of address, not random
 unsigned long generate_value(unsigned long address)
 {
 	return ((~address & OPENRAM_ADDRESS_MASK) << 19) + 
-			((~address & OPENRAM_ADDRESS_MASK) << 12) ^
-			((~address & OPENRAM_ADDRESS_MASK) << 2);
+		((~address & OPENRAM_ADDRESS_MASK) << 12) ^
+		((~address & OPENRAM_ADDRESS_MASK) << 2);
 }
 
 void main()
@@ -128,18 +128,17 @@
 		if (OPENRAM_MEM(address) != generate_value(address))
 		{
 			reg_mprj_datal = 0xAF000000;		
-			return;							// instant fail
+			return;				// instant fail
 		}
 	}
 
-    // HyperRAM test
+    	// HyperRAM test
 
 	// write register space inside hyperram
 	hyperram_reg(0x2) = 0xa573;
 
-	// write memory, low addresses, default tacc (latency) is 6 cycles (default)
-	hyperram_mem(0x320) = 0xfecdba89;
-	hyperram_mem(0x1234) = 0x13579246;
+	// write memory, low address, default tacc (latency) is 6 cycles (default)
+	hyperram_mem(0x1234) = 0xfecdba89;
 
 	// write latency csr
 	// fixed & double latency
@@ -147,27 +146,25 @@
 	hyperram_csr_latency = 0x34;
 	// read latency csr
 	volatile uint32_t read = hyperram_csr_latency;
-	// if write unsucessful, loop until timeout
 	if (read != 0x34)
 	{
+		// if write unsucessful, instant fail
 		reg_mprj_datal = 0xAF000000;
-		return; 							// instant fail		
+		return;
 	}
 
-	// write memory, high addresses, tacc should be now 4 cycles
-	hyperram_mem(0x123450) = 0x12874562;
-	hyperram_mem(0x7ffff4) = 0x77f77f77;
+	// write memory, high address, tacc should be now 4 cycles
+	hyperram_mem(0x7ffff4) = 0x12874562;
 
-	// try to read memory and trigger timeout - there's no chip connected
-	read = hyperram_mem(0x135);
-/*
-	read = hyperram_csr_status;
+	// try to read memory and trigger timeout, if there's no chip connected
+	read = hyperram_mem(0x134);
 	if (hyperram_csr_status != 1)
 	{
+
 		reg_mprj_datal = 0xAF000000;
-		return; 							// instant fail
+		return; 				// instant fail
 	}
-*/
+
 	reg_mprj_datal = 0xAC000000;			// pass
 }