diff --git a/.github/scripts/dv/pdkBuild.sh b/.github/scripts/dv/pdkBuild.sh
new file mode 100644
index 0000000..9f9ac93
--- /dev/null
+++ b/.github/scripts/dv/pdkBuild.sh
@@ -0,0 +1,59 @@
+#!/bin/bash
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# SPDX-License-Identifier: Apache-2.0
+export RUN_ROOT=$(pwd)
+
+
+# By default skip timing since we don't need the libs in any of the CI tests
+export SKIP_TIMING=${1:-1}
+export IMAGE_NAME=efabless/openlane:$OPENLANE_TAG
+docker pull $IMAGE_NAME
+
+cd $RUN_ROOT/..
+export PDK_ROOT=$(pwd)/pdks
+mkdir $PDK_ROOT
+echo $PDK_ROOT
+echo $RUN_ROOT
+cd $RUN_ROOT
+make skywater-pdk
+make skywater-library
+# The following section is for running on the CI.
+# If you're running locally you should replace them with: `make skywater-library`
+# This is because sometimes while setting up the conda env (skywater's make timing) it fails to fetch something
+# Then it exits without retrying. So, here we're retrying, and if something goes wrong it will exit after 5 retries.
+# Section Begin
+if [ $SKIP_TIMING -eq 0 ]; then
+	cnt=0
+	until make skywater-timing; do
+	cnt=$((cnt+1))
+	if [ $cnt -eq 5 ]; then
+		exit 2
+	fi
+	rm -rf $PDK_ROOT/skywater-pdk
+	make skywater-pdk
+	make skywater-library
+	done
+fi
+# Section End
+
+make open_pdks
+docker run -v $RUN_ROOT:/openLANE_flow -v $PDK_ROOT:$PDK_ROOT -e PDK_ROOT=$PDK_ROOT -u $(id -u $USER):$(id -g $USER) $IMAGE_NAME  bash -c "make build-pdk"
+
+rm -rf $PDK_ROOT/open_pdks
+rm -rf $PDK_ROOT/skywater-pdk
+
+echo "done installing"
+cd $RUN_ROOT
+exit 0
\ No newline at end of file
diff --git a/.github/scripts/dv/run-dv-wrapper.sh b/.github/scripts/dv/run-dv-wrapper.sh
new file mode 100644
index 0000000..8deec88
--- /dev/null
+++ b/.github/scripts/dv/run-dv-wrapper.sh
@@ -0,0 +1,73 @@
+#!/bin/bash
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# SPDX-License-Identifier: Apache-2.0
+
+# comma seperated test ids
+IDS=$1
+# simulation mode : RTL/GL
+SIM_MODE=$2
+
+DV_TEST_IDS=(${IDS//,/ })
+
+export TARGET_PATH=$(pwd)
+if [ ! -d $TARGET_PATH ] 
+then
+    echo "Directory /path/to/dir DOES NOT exists." 
+    exit 9999 
+fi
+
+cd ..
+
+export PDK_PATH=$(pwd)/pdks/sky130A
+if [ ! -d $PDK_PATH ] 
+then
+    echo "Directory /path/to/dir DOES NOT exists." 
+    exit 9999 
+fi
+
+DV_PATH=$TARGET_PATH/verilog/dv
+if [ ! -d $DV_PATH ] 
+then
+    echo "Directory /path/to/dir DOES NOT exists." 
+    exit 9999
+fi
+
+for id in "${DV_TEST_IDS[@]}"
+do 
+    docker run -v $TARGET_PATH:$TARGET_PATH -v $PDK_PATH:$PDK_PATH \
+                -e TARGET_PATH=$TARGET_PATH -e PDK_PATH=$PDK_PATH \
+                -u $(id -u $USER):$(id -g $USER) efabless/dv_setup:latest \
+                bash -c "bash $TARGET_PATH/.github/scripts/dv/run-dv.sh $PDK_PATH $DV_PATH $id $SIM_MODE"
+
+    echo "DONE!"
+
+    VERDICT_FILE=$TARGET_PATH/verilog/dv/$id.out
+
+    if [ -f $VERDICT_FILE ]; then
+        cnt=$(grep "Pass" $VERDICT_FILE -s | wc -l)
+        if ! [[ $cnt ]]; then cnt = 0; fi
+    else
+        echo "DV check failed due to subscript failure. Please review the logs";
+        exit 2;
+    fi
+
+    echo "Verdict: $cnt"
+
+    if [[ $cnt -ne 1 ]]; then 
+        exit 2; 
+    fi
+done
+
+exit 0;
\ No newline at end of file
diff --git a/.github/scripts/dv/run-dv.sh b/.github/scripts/dv/run-dv.sh
new file mode 100644
index 0000000..125cf3c
--- /dev/null
+++ b/.github/scripts/dv/run-dv.sh
@@ -0,0 +1,40 @@
+PDK_PATH=$1
+DV_PATH=$2
+DV_TEST_ID=$3
+SIM_MODE=$4
+
+cd $DV_PATH
+
+## get the name of all subdfolders under verilog/dv 
+ALL_DV_TESTS="$(find * -maxdepth 0 -type d)"
+## convert all ALL_DV_TESTS to an array
+TESTS_ARR=($ALL_DV_TESTS)
+## get length of the TESTS array
+len=${#TESTS_ARR[@]}
+
+## make sure that the test ID is less than the array length
+if [ $DV_TEST_ID -ge $len ]
+then
+    echo "Error: Invalid Test ID"
+    exit 1
+fi
+
+## get the name corresponding to the test ID
+PATTERN=${TESTS_ARR[$DV_TEST_ID]}
+
+OUT_FILE=$DV_PATH/$DV_TEST_ID.out
+
+export SIM=$SIM_MODE
+echo "Running $PATTERN $SIM.."
+logFile=$DV_PATH/$PATTERN.$SIM.dv.out
+cd $PATTERN
+echo $(pwd)
+make 2>&1 | tee $logFile
+grep "Monitor" $logFile >> $OUT_FILE
+make clean
+
+echo "Execution Done on $PATTERN !"
+
+cat $OUT_FILE
+
+exit 0
\ No newline at end of file
diff --git a/.github/scripts/precheck/run-precheck-drc.sh b/.github/scripts/precheck/run-precheck-drc.sh
new file mode 100644
index 0000000..51dc751
--- /dev/null
+++ b/.github/scripts/precheck/run-precheck-drc.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# SPDX-License-Identifier: Apache-2.0
+export TARGET_PATH=$(pwd)
+cd ..
+export PDK_ROOT=$(pwd)/precheck_pdks
+cd $TARGET_PATH/open_mpw_precheck/
+
+docker run -v $(pwd):/usr/local/bin -v $TARGET_PATH:$TARGET_PATH -v $PDK_ROOT:$PDK_ROOT -u $(id -u $USER):$(id -g $USER) efabless/open_mpw_precheck:latest bash -c "python3 open_mpw_prechecker.py --drc_only -p $PDK_ROOT -t $TARGET_PATH"
+output=$TARGET_PATH/checks/full_log.log
+
+gzipped_file=$TARGET_PATH/checks/full_log.log.gz
+
+if [[ -f $gzipped_file ]]; then
+    gzip -d $gzipped_file
+fi
+
+grep "Violation Message" $output
+
+cnt=$(grep -c "All Checks PASSED!" $output)
+if ! [[ $cnt ]]; then cnt=0; fi
+if [[ $cnt -eq 1 ]]; then exit 0; fi
+exit 2
\ No newline at end of file
diff --git a/.github/scripts/precheck/run-precheck.sh b/.github/scripts/precheck/run-precheck.sh
index 569ecc7..6b7a1fb 100644
--- a/.github/scripts/precheck/run-precheck.sh
+++ b/.github/scripts/precheck/run-precheck.sh
@@ -18,7 +18,7 @@
 export PDK_ROOT=$(pwd)/precheck_pdks
 cd $TARGET_PATH/open_mpw_precheck/
 
-docker run -v $(pwd):/usr/local/bin -v $TARGET_PATH:$TARGET_PATH -v $PDK_ROOT:$PDK_ROOT -u $(id -u $USER):$(id -g $USER) efabless/open_mpw_precheck:latest bash -c "python3 open_mpw_prechecker.py -p $PDK_ROOT -t $TARGET_PATH"
+docker run -v $(pwd):/usr/local/bin -v $TARGET_PATH:$TARGET_PATH -v $PDK_ROOT:$PDK_ROOT -u $(id -u $USER):$(id -g $USER) efabless/open_mpw_precheck:latest bash -c "python3 open_mpw_prechecker.py --skip_drc -p $PDK_ROOT -t $TARGET_PATH"
 output=$TARGET_PATH/checks/full_log.log
 
 gzipped_file=$TARGET_PATH/checks/full_log.log.gz
@@ -32,4 +32,4 @@
 cnt=$(grep -c "All Checks PASSED!" $output)
 if ! [[ $cnt ]]; then cnt=0; fi
 if [[ $cnt -eq 1 ]]; then exit 0; fi
-exit 2
+exit 2
\ No newline at end of file
diff --git a/.github/workflows/caravel_example_ci.yml b/.github/workflows/caravel_example_ci.yml
index cfb184d..e833d29 100644
--- a/.github/workflows/caravel_example_ci.yml
+++ b/.github/workflows/caravel_example_ci.yml
@@ -10,6 +10,7 @@
 jobs:
   precheck:
     runs-on: ubuntu-latest
+    timeout-minutes: 720
     steps:
       - uses: actions/checkout@v2
         with:
@@ -26,3 +27,49 @@
 
       - name: Run The Precheck
         run: bash ${GITHUB_WORKSPACE}/.github/scripts/precheck/run-precheck.sh
+  
+  precheck-drc:
+    timeout-minutes: 720
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+        with:
+          submodules: 'true'
+
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v1
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v1
+
+      - name: Install The Precheck
+        run: sh ${GITHUB_WORKSPACE}/.github/scripts/precheck/precheckBuild.sh
+
+      - name: Run The Precheck
+        run: bash ${GITHUB_WORKSPACE}/.github/scripts/precheck/run-precheck-drc.sh
+  
+  dv_rtl:
+    runs-on: ubuntu-latest
+    steps:
+       - uses: actions/checkout@v2
+         with:
+          submodules: 'true'
+      
+       - name: Set up QEMU
+         uses: docker/setup-qemu-action@v1
+
+       - name: Set up Docker Buildx
+         uses: docker/setup-buildx-action@v1
+        
+       - name: Install The PDK
+         run:  bash ${GITHUB_WORKSPACE}/.github/scripts/dv/pdkBuild.sh
+         env: 
+          OPENLANE_TAG: v0.12
+          
+       - name: Install The Dockerized DV Setup
+         run:  docker pull efabless/dv_setup:latest
+       
+       - name: Run DV tests
+         # Run test number 0,1,2,3 in one job                               <test-ids>   <sim-mode>
+         run: bash ${GITHUB_WORKSPACE}/.github/scripts/dv/run-dv-wrapper.sh 0,1,2,3      RTL
+  
\ No newline at end of file