/*
*
* This file is part of the Elpis processor project.
*
* Copyright © 2020-present. All rights reserved.
* Authors: Aurora Tomas and Rodrigo Huerta.
*
* This file is licensed under both the BSD-3 license for individual/non-commercial
* use. Full text of both licenses can be found in LICENSE file.
*/

`default_nettype none

`ifdef TESTS
	`include "elpis/definitions.v"
`else
    `include "/project/openlane/user_proj_example/../../verilog/rtl/elpis/definitions.v"
`endif

module memory
	(
`ifdef USE_POWER_PINS
	inout vdda1,        // User area 1 3.3V supply
	inout vdda2,        // User area 2 3.3V supply
	inout vssa1,        // User area 1 analog ground
	inout vssa2,        // User area 2 analog ground
	inout vccd1,        // User area 1 1.8V supply
	inout vccd2,        // User area 2 1.8v supply
	inout vssd1,        // User area 1 digital ground
	inout vssd2,        // User area 2 digital ground
`endif
	input clk,
	input reset,
	input we,
	input[19:0] addr_in,
	input[127:0] wr_data,
	input requested,
	input reset_mem_req,
	output reg[127:0] rd_data_out,
	// output[127:0] rd_data_out,
	output ready,
	input is_loading_memory_into_core,
	input[19:0] addr_to_core_mem,
	input[31:0] data_to_core_mem
);
	wire[19:0] addr_output_mem;
	wire[7:0] first_bit_out_current;
	reg[7:0] first_bit_out_previous;
	wire[31:0] auxiliar_mem_out;

	// (* ramstyle = "M9K" *) reg[31:0] mem[0:`MEMORY_SIZE-1];
	reg[$clog2(`MEMORY_DELAY_CYCLES):0] cycles;
	
	assign ready = cycles == 0;

	assign addr_output_mem = addr_in + (cycles % 3'd4);
	assign first_bit_out_current = 6'd32 * (cycles % 3'd4);

	integer i;
	always@(posedge clk) begin
		if(reset) begin 
			cycles <= 0;
		end else if (reset_mem_req) begin
			cycles <= 0;
		end else if ((ready && requested))begin
			cycles <= `MEMORY_DELAY_CYCLES;
		end else if(cycles!=0) begin
			cycles <= cycles-1'b1 ;
		end

		// if (we && requested && !is_loading_memory_into_core) begin
		// 	if(cycles == 4)
		// 		mem[addr_in] <= wr_data[31:0];
		// 	else if (cycles == 3) begin
		// 		mem[addr_in+1] <= wr_data[63:32];
		// 	end else if (cycles == 2) begin
		// 		mem[addr_in+2] <= wr_data[95:64];
		// 	end else if (cycles == 1) begin
		// 		mem[addr_in+3] <= wr_data[127:96];
		// 	end 
		// end else if(is_loading_memory_into_core) begin
		// 	mem[addr_to_core_mem] <= data_to_core_mem;
		// end

		// auxiliar_mem_out <= mem[addr_output_mem];
		first_bit_out_previous <= first_bit_out_current;
		rd_data_out[first_bit_out_previous +:32] <= auxiliar_mem_out;
	end

	wire[31:0] dummy_out;

	reg[19:0] addr_to_sram;

	always@(*) begin
		if (we && requested && !is_loading_memory_into_core) begin
			if(cycles == 4)
				addr_to_sram <= addr_in;
			else if (cycles == 3) begin
				addr_to_sram <= addr_in+1;
			end else if (cycles == 2) begin
				addr_to_sram <= addr_in+2;
			end else if (cycles == 1) begin
				addr_to_sram <= addr_in+3;
			end 
		end else if(is_loading_memory_into_core) begin
			addr_to_sram <= addr_to_core_mem;
		end else begin
			addr_to_sram <= addr_output_mem;
		end
	end

	reg[31:0] data_to_sram;
	always@(*) begin
		if (we && requested && !is_loading_memory_into_core) begin
			if(cycles == 4)
				data_to_sram <= wr_data[31:0];
			else if (cycles == 3) begin
				data_to_sram <= wr_data[63:32];
			end else if (cycles == 2) begin
				data_to_sram <= wr_data[95:64];
			end else if (cycles == 1) begin
				data_to_sram <= wr_data[127:96];
			end 
		end else if(is_loading_memory_into_core) begin
			data_to_sram <= data_to_core_mem;
		end else begin
			data_to_sram <= 32'b0;
		end
	end
	

	sram_32_1024_sky130 CPURAM(
		`ifdef USE_POWER_PINS
		.vccd1(vccd1),
		.vssd1(vssd1),
		`endif
		.clk0(clk),
		.csb0(1'b0),
		.web0(!we),
		.spare_wen0(1'b0),
		.addr0(addr_to_sram),
		.din0(data_to_sram),
		.dout0(auxiliar_mem_out)
	);

	// always @(*) begin
	// 	auxiliar_mem_out <= we ? 32'b0 : data_to_sram;
	// end

	//OPENLANE
	// reg[31:0] mem[0:`MEMORY_SIZE-1];
	// reg[$clog2(`MEMORY_DELAY_CYCLES):0] cycles;
	
	// assign ready = cycles == 0;

	// // integer i;
	// always@(posedge clk) begin
	// 	if(reset) begin 
	// 		cycles <= 0;
	// 	end else if (reset_mem_req) begin
	// 		cycles <= 0;
	// 	end else if ((ready && requested))begin
	// 		cycles <= `MEMORY_DELAY_CYCLES;
	// 	end else if(cycles!=0) begin
	// 		cycles <= cycles-1'b1 ;
	// 	end

	// 	if (we && requested && !is_loading_memory_into_core) begin
	// 		mem[addr_in+3] <= wr_data[127:96];
	// 		mem[addr_in+2] <= wr_data[95:64];
	// 		mem[addr_in+1] <= wr_data[63:32];
	// 		mem[addr_in] <= wr_data[31:0];
	// 	end else if(is_loading_memory_into_core) begin
	// 		mem[addr_to_core_mem] <= data_to_core_mem;
	// 	end
	// end

	// assign rd_data_out[127:96] = mem[addr_in+3];
	// assign rd_data_out[95:64] = mem[addr_in+2];
	// assign rd_data_out[63:32] = mem[addr_in+1];
	// assign rd_data_out[31:0] = mem[addr_in];
	
endmodule