blob: 76f0c39ce1b1e7bbc02af3a87e0a23075d383afd [file] [log] [blame]
.. raw:: html
<!---
# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# SPDX-License-Identifier: Apache-2.0
-->
Caravel User Project
====================
|License| |User CI| |Caravel Build|
Table of contents
=================
- `Overview <#overview>`__
- `Install Caravel <#install-caravel>`__
- `Caravel Integration <#caravel-integration>`__
- `Repo Integration <#repo-integration>`__
- `Verilog Integration <#verilog-integration>`__
- `Running Full Chip Simulation <#running-full-chip-simulation>`__
- `Hardening the User Project Macro using
Openlane <#hardening-the-user-project-macro-using-openlane>`__
- `Checklist for Open-MPW
Submission <#checklist-for-open-mpw-submission>`__
Overview
========
This repo contains a sample user project that utilizes the
`caravel <https://github.com/efabless/caravel.git>`__ chip user space.
The user project is a simple counter that showcases how to make use of
`caravel's <https://github.com/efabless/caravel.git>`__ user space
utilities like IO pads, logic analyzer probes, and wishbone port. The
repo also demonstrates the recommended structure for the open-mpw
shuttle projects.
Install Caravel
===============
To setup caravel, run the following:
.. code:: bash
# By default, CARAVEL_ROOT is set to $(pwd)/caravel
# If you want to install caravel at a different location, run "export CARAVEL_ROOT=<caravel-path>"
# Disable submodule installation if needed by, run "export SUBMODULE=0"
clone https://github.com/efabless/caravel_user_project.git
cd caravel_user_project
make install
To update the installed caravel to the latest, run:
.. code:: bash
make update_caravel
To remove caravel, run
.. code:: bash
make uninstall
By default
`caravel-lite <https://github.com/efabless/caravel-lite.git>`__ is
installed. To install the full version of caravel, run this prior to
calling make install.
.. code:: bash
export CARAVEL_LITE=0
Caravel Integration
===================
Repo Integration
----------------
Caravel files are kept separate from the user project by having caravel
as submodule. The submodule commit should point to the latest of
caravel/caravel-lite master. The following files should have a symbolic
link to `caravel's <https://github.com/efabless/caravel.git>`__
corresponding files:
- `Openlane Makefile <openlane/Makefile>`__: This provides an easier
way for running openlane to harden your macros. Refer to `Hardening
the User Project Macro using
Openlane <#hardening-the-user-project-macro-using-openlane>`__. Also,
the makefile retains the openlane summary reports under the signoff
directory.
- `Pin order <openlane/user_project_wrapper/pin_order.cfg>`__ file for
the user wrapper: The hardened user project wrapper macro must have
the same pin order specified in caravel's repo. Failing to adhere to
the same order will fail the gds integration of the macro with
caravel's back-end.
The symbolic links are automatically set when you run ``make install``.
Verilog Integration
-------------------
You need to create a wrapper around your macro that adheres to the
template at
`user\_project\_wrapper <caravel/verilog/rtl/__user_project_wrapper.v>`__.
The wrapper top module must be named ``user_project_wrapper`` and must
have the same input and output ports. The wrapper gives access to the
user space utilities provided by caravel like IO ports, logic analyzer
probes, and wishbone bus connection to the management SoC.
For this sample project, the user macro makes use of:
- The IO ports for displaying the count register values on the IO pads.
- The LA probes for supplying an optional reset and clock signals and
for setting an initial value for the count register.
- The wishbeone port for reading/writing the count value through the
management SoC.
Refer to `user\_project\_wrapper <verilog/rtl/user_project_wrapper.v>`__
for more information.
.. raw:: html
<p align="center">
<img src="./_static/counter_32.png" width="50%" height="50%">
</p>
.. raw:: html
</p>
Running Full Chip Simulation
============================
First, you will need to install the simulation environment, by
.. code:: bash
make simenv
This will pull a docker image with the needed tools installed.
Then, you will need to build the pdk to obtain the verilog views.
.. code:: bash
# set PDK_ROOT to the path you wish to use for the pdk
export PDK_ROOT=<pdk-installation-path>
# you can optionally specify skywater-pdk and open-pdks commit used
# by setting and exporting SKYWATER_COMMIT and OPEN_PDKS_COMMIT
# if you do not set them, they default to the last verfied commits tested for this project
make pdk
Then, run the RTL and GL simulation by
.. code:: bash
export PDK_ROOT=<pdk-installation-path>
export CARAVEL_ROOT=$(pwd)/caravel
# specify simulation mode: RTL/GL
export SIM=RTL
# Run IO ports testbench, make verify-io_ports
make verify-<dv-pattern>
The verilog test-benches are under this directory
`verilog/dv <verilog/dv>`__. For more information on setting up the
simulation environment and the available testbenches for this sample
project, refer to `README <verilog/dv/README.md>`__.
Hardening the User Project Macro using Openlane
===============================================
First, you will need to install the pdk by
.. code:: bash
# set PDK_ROOT to the path you wish to use for the pdk
export PDK_ROOT=<pdk-installation-path>
# you can optionally specify skywater-pdk and open-pdks commit used
# by setting and exporting SKYWATER_COMMIT and OPEN_PDKS_COMMIT
# if you do not set them, they default to the last verfied commits tested for this project
make pdk
Then, you will need to install openlane by
.. code:: bash
export OPENLANE_ROOT=<openlane-installation-path>
export OPENLANE_TAG=v0.12
make openlane
For detailed instructions on how to install openlane and the pdk refer
to
`README <https://github.com/efabless/openlane/blob/master/README.md>`__.
There are two options for hardening the user project macro using
openlane:
1. Hardening the user macro, then embedding it in the wrapper
2. Flattening the user macro with the wrapper.
For more details on this, refer to this
`README <https://github.com/efabless/caravel/blob/master/openlane/README.rst>`__.
For this sample project, we went for the first option where the user
macro is hardened first, then it is inserted in the user project
wrapper.
.. raw:: html
<p align="center">
<img src="./_static/wrapper.png" width="50%" height="50%">
</p>
.. raw:: html
</p>
To reproduce hardening this project, run the following:
.. code:: bash
export OPENLANE_TAG=v0.12
# Run openlane to harden user_proj_example
make user_proj_example
# Run openlane to harden user_project_wrapper
make user_project_wrapper
Checklist for Open-MPW Submission
=================================
- [x] The project repo adheres to the same directory structure in this
repo.
- [x] The project repo contain info.yaml at the project root.
- [x] Top level macro is named ``user_project_wrapper``.
- [x] Full Chip Simulation passes for RTL and GL (gate-level)
- [x] The hardened Macros are LVS and DRC clean
- [x] The hardened ``user_project_wrapper`` adheres to the same pin
order specified at
`pin\_order <https://github.com/efabless/caravel/blob/master/openlane/user_project_wrapper_empty/pin_order.cfg>`__
- [x] XOR check passes with zero total difference.
- [x] Openlane summary reports are retained under ./signoff/
.. |License| image:: https://img.shields.io/badge/License-Apache%202.0-blue.svg
:target: https://opensource.org/licenses/Apache-2.0
.. |User CI| image:: https://github.com/efabless/caravel_project_example/actions/workflows/user_project_ci.yml/badge.svg
:target: https://github.com/efabless/caravel_project_example/actions/workflows/user_project_ci.yml
.. |Caravel Build| image:: https://github.com/efabless/caravel_project_example/actions/workflows/caravel_build.yml/badge.svg
:target: https://github.com/efabless/caravel_project_example/actions/workflows/caravel_build.yml