| accuracy_requirement = 0.75 |
| analytical_delay = True |
| auto_delay_chain_sizing = False |
| bank_select = "bank_select" |
| bitcell = "bitcell_1port" |
| bitcell_array = "bitcell_array" |
| buf_dec = "pbuf" |
| check_lvsdrc = False |
| col_cap = "col_cap" |
| col_cap_array = "col_cap_array" |
| column_mux_array = "column_mux_array" |
| config_file = "/home/shon/vsdsram_sky130/myconfig_sky130.py" |
| control_logic = "control_logic" |
| coverage = 0 |
| debug = False |
| decoder = "hierarchical_decoder" |
| delay_chain = "delay_chain" |
| delay_chain_fanout_per_stage = 4 |
| delay_chain_stages = 9 |
| dff = "dff" |
| dff_array = "dff_array" |
| drc_exe = None |
| drc_name = "" |
| dummy_bitcell = "dummy_bitcell_1port" |
| inline_lvsdrc = False |
| inv_dec = "pinv" |
| is_unit_test = False |
| keep_temp = False |
| load_scales = [0.25, 1, 4] |
| local_array_size = 0 |
| lvs_exe = None |
| lvs_name = "" |
| magic_exe = None |
| nand2_dec = "pnand2" |
| nand3_dec = "pnand3" |
| nand4_dec = "pnand4" |
| netlist_only = False |
| nominal_corner_only = False |
| num_banks = 1 |
| num_r_ports = 0 |
| num_rw_ports = 1 |
| num_spare_cols = 0 |
| num_spare_rows = 0 |
| num_threads = 2 |
| num_w_ports = 0 |
| num_words = 1024 |
| openram_tech = "/home/shon/vsdsram_sky130/OpenRAM/technology/sky130A/" |
| openram_temp = "/tmp/openram_shon_7751_temp/" |
| output_extended_config = True |
| output_name = "sram_32_1024_sky130A" |
| output_path = "/home/shon/vsdsram_sky130/temp/" |
| overridden = {'__name__': True, '__doc__': True, '__package__': True, '__loader__': True, '__spec__': True, '__file__': True, '__cached__': True, '__builtins__': True, 'word_size': True, 'num_words': True, 'tech_name': True, 'process_corners': True, 'supply_voltages': True, 'temperatures': True, 'output_path': True, 'output_name': True} |
| perimeter_pins = True |
| pex_exe = None |
| pex_name = "" |
| precharge_array = "precharge_array" |
| print_banner = True |
| process_corners = ['SS', 'TT', 'FF'] |
| ptx = "ptx" |
| rbl_delay_percentage = 0.5 |
| replica_bitcell = "replica_bitcell_1port" |
| replica_bitline = "replica_bitline" |
| route_supplies = "tree" |
| row_cap = "row_cap" |
| row_cap_array = "row_cap_array" |
| sense_amp = "sense_amp" |
| sense_amp_array = "sense_amp_array" |
| slew_scales = [0.25, 1, 8] |
| spice_exe = "" |
| spice_name = "" |
| supply_voltages = [1.8] |
| tech_name = "sky130A" |
| temperatures = [0, 25, 100] |
| tri_gate = "tri_gate" |
| tri_gate_array = "tri_gate_array" |
| trim_netlist = False |
| use_pex = False |
| verbose_level = 0 |
| word_size = 32 |
| wordline_driver = "wordline_driver" |
| words_per_row = 8 |
| write_driver = "write_driver" |
| write_driver_array = "write_driver_array" |
| write_mask_and_array = "write_mask_and_array" |
| write_size = None |
