.. raw:: html

   <!---
   # SPDX-FileCopyrightText: 2020 Efabless Corporation
   #
   # Licensed under the Apache License, Version 2.0 (the "License");
   # you may not use this file except in compliance with the License.
   # You may obtain a copy of the License at
   #
   #      http://www.apache.org/licenses/LICENSE-2.0
   #
   # Unless required by applicable law or agreed to in writing, software
   # distributed under the License is distributed on an "AS IS" BASIS,
   # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   # See the License for the specific language governing permissions and
   # limitations under the License.
   #
   # SPDX-License-Identifier: Apache-2.0
   -->

Caravel Analog User Project
===========================

|License| |User CI| |Caravan Build|

Table of contents
=================

-  `Overview <#overview>`__
-  `Install Caravel <#install-caravel>`__
-  `Caravel Integration <#caravel-integration>`__

   - `User Project: Power on Reset <#user-project-power-on-reset>`_
   -  `Verilog Integration <#verilog-integration>`__
   
-  `Running Full Chip Simulation <#running-full-chip-simulation>`__
- `Other Miscellaneous Targets <#other-miscellaneous-targets>`_
-  `Checklist for Open-MPW
   Submission <#checklist-for-open-mpw-submission>`__
   
Overview
========

This repo contains a sample user project that utilizes the caravan chip (analog version of `caravel <https://github.com/efabless/caravel.git>`__) user space. The user project is a simple power-on-reset that showcases how to make use of caravan's user space utilities like IO pads, logic analyzer probes, and wishbone port. The repo also demonstrates the recommended structure for the open-mpw **analog** projects.

Install Caravel
===============

To setup caravel, run the following:

.. code:: bash

    # By default, CARAVEL_ROOT is set to $(pwd)/caravel
    # If you want to install caravel at a different location, run "export CARAVEL_ROOT=<caravel-path>"
    # Disable submodule installation if needed by, run "export SUBMODULE=0"
    
    git clone https://github.com/efabless/caravel_user_project_analog.git
    cd caravel_user_project_analog
    make install

To update the installed caravel to the latest, run:

.. code:: bash

     make update_caravel

To remove caravel, run

.. code:: bash

    make uninstall

By default
`caravel-lite <https://github.com/efabless/caravel-lite.git>`__ is
installed. To install the full version of caravel, run this prior to
calling make install.

.. code:: bash

    export CARAVEL_LITE=0
 
Caravel Integration
=====================


User Project: Power on Reset
----------------------------

> :construction: Under construction :construction:

Verilog Integration
-------------------

You need to create a wrapper around your macro that adheres to the
template at
`user\_analog_project\_wrapper <https://github.com/efabless/caravel/blob/master/verilog/rtl/__user_analog_project_wrapper.v>`__.
The wrapper top module must be named ``user_analog_project_wrapper`` and must
have the same input and output ports as the analog wrapper template. The wrapper gives access to the
user space utilities provided by caravel like IO ports, logic analyzer
probes, and wishbone bus connection to the management SoC.


Building the PDK 
================

You have two options for building the pdk: 

- Build the pdk natively. 

Make sure you have `Magic VLSI Layout Tool <http://opencircuitdesign.com/magic/index.html>`__   `version 8.3.160 <https://github.com/RTimothyEdwards/magic/tree/8.3.160>`__ installed on your machine before building the pdk. 

.. code:: bash

    # set PDK_ROOT to the path you wish to use for the pdk
    export PDK_ROOT=<pdk-installation-path>

    # you can optionally specify skywater-pdk and open-pdks commit used
    # by setting and exporting SKYWATER_COMMIT and OPEN_PDKS_COMMIT
    # if you do not set them, they default to the last verfied commits tested for this project

    make pdk

- Build the pdk using openlane's docker image which has magic installed. 

.. code:: bash

    # set PDK_ROOT to the path you wish to use for the pdk
    export PDK_ROOT=<pdk-installation-path>

    # you can optionally specify skywater-pdk and open-pdks commit used
    # by setting and exporting SKYWATER_COMMIT and OPEN_PDKS_COMMIT
    # if you do not set them, they default to the last verfied commits tested for this project

    make pdk-nonnative

Running Full Chip Simulation
============================

First, you will need to install the simulation environment, by

.. code:: bash

    make simenv

This will pull a docker image with the needed tools installed.

To install the simulation environment locally, refer to `README <https://github.com/efabless/caravel_user_project_analog/blob/main/verilog/dv/README.md>`__

Then, run the RTL and GL simulation by

.. code:: bash

    export PDK_ROOT=<pdk-installation-path>
    export CARAVEL_ROOT=$(pwd)/caravel
    # specify simulation mode: RTL/GL
    export SIM=RTL
    # Run the mprj_por testbench, make verify-mprj_por
    make verify-<testbench-name>

The verilog test-benches are under this directory
`verilog/dv <https://github.com/efabless/caravel_user_project_analog/tree/main/verilog/dv>`__.

Running Open-MPW Precheck Locally
=================================

You can install the precheck by running 

.. code:: bash

   # By default, this install the precheck in your home directory
   # To change the installtion path, run "export PRECHECK_ROOT=<precheck installation path>" 
   make precheck

This will clone the precheck repo and pull the latest precheck docker image. 


Then, you can run the precheck by running
Specify CARAVEL_ROOT before running any of the following, 

.. code:: bash

   # export CARAVEL_ROOT=$(pwd)/caravel 
   export CARAVEL_ROOT=<path-to-caravel>
   make run-precheck

This will run all the precheck checks on your project and will retain the logs under the ``checks`` directory.

Other Miscellaneous Targets
============================

The makefile provides a number of useful that targets that can run compress, uncompress, and run XOR checks on your design. 

Compress gds files and any file larger than 100MB (GH file size limit), 

.. code:: bash

   make compress

Uncompress files, 

.. code:: bash

   make uncompress


Specify ``CARAVEL_ROOT`` before running any of the following, 

.. code:: bash

   # export CARAVEL_ROOT=$(pwd)/caravel 
   export CARAVEL_ROOT=<path-to-caravel>
   
Run XOR check, 

.. code:: bash

   make xor-analog-wrapper

Checklist for Open-MPW Submission
=================================


|:heavy_check_mark:| The project repo adheres to the same directory structure in this repo.
   
|:heavy_check_mark:| The project repo contain info.yaml at the project root.

|:heavy_check_mark:| Top level macro is named ``user_analog_project_wrapper``.

|:heavy_check_mark:| Full Chip Simulation passes for RTL and GL (gate-level)

|:heavy_check_mark:| The hardened Macros are LVS and DRC clean

|:heavy_check_mark:| The ``user_analog_project_wrapper`` adheres to empty wrapper template  order specified at  `user_analog_project_wrapper_empty <https://github.com/efabless/caravel/blob/master/mag/user_analog_project_wrapper_empty.mag>`__

|:heavy_check_mark:| XOR check passes with zero total difference.

|:heavy_check_mark:| Open-MPW-Precheck tool runs successfully. 


.. |License| image:: https://img.shields.io/badge/License-Apache%202.0-blue.svg
   :target: https://opensource.org/licenses/Apache-2.0
.. |User CI| image:: https://github.com/efabless/caravel_user_project_analog/actions/workflows/user_project_ci.yml/badge.svg
   :target: https://github.com/efabless/caravel_user_project_analog/actions/workflows/user_project_ci.yml
.. |Caravan Build| image:: https://github.com/efabless/caravel_user_project_analog/actions/workflows/caravan_build.yml/badge.svg
   :target: https://github.com/efabless/caravel_user_project_analog/actions/workflows/caravan_build.yml