library (ls05_stdcells) {  capacitive_load_unit (1.0, pf);  current_unit: "1uA";  default_operating_conditions: typical;  delay_model: table_lookup;  in_place_swap_mode: match_footprint;  input_threshold_pct_fall: 50.0;  input_threshold_pct_rise: 50.0;  leakage_power_unit: "1nW";  nom_process: 1.0;  nom_temperature: 25.0;  nom_voltage: 5.0;  output_threshold_pct_fall: 50.0;  output_threshold_pct_rise: 50.0;  pulling_resistance_unit: "1kohm";  slew_lower_threshold_pct_fall: 20.0;  slew_lower_threshold_pct_rise: 20.0;  slew_upper_threshold_pct_fall: 80.0;  slew_upper_threshold_pct_rise: 80.0;  time_unit: "1ns";  voltage_unit: "1V";  operating_conditions (typical) {    process: 1.0;    temperature: 25.0;    voltage: 5.0;  }  lu_table_template (delay_template_5x1) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    variable_1: input_net_transition;  }  lu_table_template (delay_template_5x5) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    variable_1: total_output_net_capacitance;    variable_2: input_net_transition;  }  lu_table_template (delay_template_5x6) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: total_output_net_capacitance;    variable_2: input_net_transition;  }  lu_table_template (delay_template_6x1) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: input_net_transition;  }  lu_table_template (delay_template_6x6) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: total_output_net_capacitance;    variable_2: input_net_transition;  }  power_lut_template (energy_template_5x5) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    variable_1: total_output_net_capacitance;    variable_2: input_transition_time;  }  power_lut_template (energy_template_5x6) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: total_output_net_capacitance;    variable_2: input_transition_time;  }  power_lut_template (energy_template_6x6) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: total_output_net_capacitance;    variable_2: input_transition_time;  }  lu_table_template (hold_template_3x5) {    index_1 (      "1000.0, 1001.0, 1002.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    variable_1: related_pin_transition;    variable_2: constrained_pin_transition;  }  lu_table_template (hold_template_3x6) {    index_1 (      "1000.0, 1001.0, 1002.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: related_pin_transition;    variable_2: constrained_pin_transition;  }  power_lut_template (passive_energy_template_5x1) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    variable_1: input_transition_time;  }  power_lut_template (passive_energy_template_6x1) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: input_transition_time;  }  lu_table_template (recovery_template_3x6) {    index_1 (      "1000.0, 1001.0, 1002.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: related_pin_transition;    variable_2: constrained_pin_transition;  }  lu_table_template (recovery_template_6x6) {    index_1 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: related_pin_transition;    variable_2: constrained_pin_transition;  }  lu_table_template (removal_template_3x6) {    index_1 (      "1000.0, 1001.0, 1002.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: related_pin_transition;    variable_2: constrained_pin_transition;  }  lu_table_template (setup_template_3x5) {    index_1 (      "1000.0, 1001.0, 1002.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0"    );    variable_1: related_pin_transition;    variable_2: constrained_pin_transition;  }  lu_table_template (setup_template_3x6) {    index_1 (      "1000.0, 1001.0, 1002.0"    );    index_2 (      "1000.0, 1001.0, 1002.0, 1003.0, 1004.0, 1005.0"    );    variable_1: related_pin_transition;    variable_2: constrained_pin_transition;  }  cell (INVX1) {    pg_pin (vdd) { voltage_name : "vdd"; pg_type : "primary_power"; } pg_pin (gnd) { voltage_name : "gnd"; pg_type : "primary_ground"; } area: 109728.0;    cell_leakage_power: 0.1173;    pin (A) {      capacitance: 0.007547126607243736;      direction: input;      fall_capacitance: 0.008904762554228705;      rise_capacitance: 0.0061894906602587675;    }    pin (Y) {      direction: output;      function: "(!A)";      timing () {        related_pin: "A";        timing_sense: negative_unate;        cell_rise (delay_template_5x5) {          index_1 (            "0.000500, 0.050000, 0.100000, 0.200000, 1.000000"          );          index_2 (            "0.010000, 0.050000, 0.100000, 0.200000, 1.500000"          );          values (            "0.005045, 0.004666, 0.003429, -0.000859, -0.065505",             "0.044989, 0.042725, 0.047543, 0.051692, 0.040256",             "0.088909, 0.082182, 0.082392, 0.089237, 0.111465",             "0.176860, 0.166922, 0.160768, 0.159204, 0.223911",             "0.881893, 0.869050, 0.853857, 0.827782, 0.824694"          );        }        cell_fall (delay_template_5x5) {          index_1 (            "0.000500, 0.050000, 0.100000, 0.200000, 1.000000"          );          index_2 (            "0.010000, 0.050000, 0.100000, 0.200000, 1.500000"          );          values (            "0.005563, 0.008612, 0.012339, 0.017358, 0.087849",             "0.046446, 0.047702, 0.053516, 0.064252, 0.179451",             "0.090922, 0.089928, 0.091895, 0.103197, 0.242872",             "0.179772, 0.177219, 0.176091, 0.179128, 0.343479",             "0.895275, 0.891758, 0.887322, 0.880070, 0.928854"          );        }        rise_transition (delay_template_5x5) {          index_1 (            "0.000500, 0.050000, 0.100000, 0.200000, 1.000000"          );          index_2 (            "0.010000, 0.050000, 0.100000, 0.200000, 1.500000"          );          values (            "0.008037, 0.028704, 0.054668, 0.109521, 0.869966",             "0.076055, 0.081921, 0.097573, 0.140257, 0.863906",             "0.147843, 0.149496, 0.158979, 0.188238, 0.862306",             "0.288563, 0.287255, 0.290237, 0.307382, 0.902900",             "1.419778, 1.420153, 1.419732, 1.419717, 1.673889"          );        }        fall_transition (delay_template_5x5) {          index_1 (            "0.000500, 0.050000, 0.100000, 0.200000, 1.000000"          );          index_2 (            "0.010000, 0.050000, 0.100000, 0.200000, 1.500000"          );          values (            "0.008767, 0.031084, 0.058052, 0.115960, 0.868417",             "0.090912, 0.096720, 0.111536, 0.155787, 0.875627",             "0.176967, 0.177851, 0.188412, 0.219917, 0.899333",             "0.347603, 0.347624, 0.351003, 0.368838, 0.971602",             "1.725267, 1.725008, 1.725609, 1.725893, 1.975591"          );        }      }    }  }}