diff --git a/verilog/dv/user_proj_example/Makefile b/verilog/dv/Makefile
similarity index 100%
rename from verilog/dv/user_proj_example/Makefile
rename to verilog/dv/Makefile
diff --git a/verilog/dv/README.md b/verilog/dv/README.md
new file mode 100644
index 0000000..280f14b
--- /dev/null
+++ b/verilog/dv/README.md
@@ -0,0 +1,244 @@
+<!---
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+-->
+
+# Simulation Environment Setup
+
+There are two options for setting up the simulation environment: 
+
+* Pulling a pre-built docker image 
+* Installing the dependecies locally
+
+## 1. Docker
+
+There is an available docker setup with the needed tools at [efabless/dockerized-verification-setup](https://github.com/efabless/dockerized-verification-setup) 
+
+Run the following to pull the image: 
+
+```
+docker pull efabless/dv_setup:latest
+```
+
+## 2. Local Installion (Linux)
+
+You will need to fullfil these dependecies: 
+
+* Icarus Verilog (10.2+)
+* RV32I Toolchain
+
+Using apt, you can install Icarus Verilog:
+
+```bash
+sudo apt-get install iverilog
+```
+
+Next, you will need to build the RV32I toolchain. Firstly, export the installation path for the RV32I toolchain, 
+
+```bash
+export GCC_PATH=<gcc-installation-path>
+```
+
+Then, run the following: 
+
+```bash
+# packages needed:
+sudo apt-get install autoconf automake autotools-dev curl libmpc-dev \
+    libmpfr-dev libgmp-dev gawk build-essential bison flex texinfo \
+    gperf libtool patchutils bc zlib1g-dev git libexpat1-dev
+
+sudo mkdir $GCC_PATH
+sudo chown $USER $GCC_PATH
+
+git clone https://github.com/riscv/riscv-gnu-toolchain riscv-gnu-toolchain-rv32i
+cd riscv-gnu-toolchain-rv32i
+git checkout 411d134
+git submodule update --init --recursive
+
+mkdir build; cd build
+../configure --with-arch=rv32i --prefix=$GCC_PATH
+make -j$(nproc)
+```
+
+# Running Simulation
+
+## Docker
+
+First, you will need to export a number of environment variables: 
+
+```bash
+export PDK_PATH=<pdk-location/sky130A>
+export CARAVEL_ROOT=<caravel_root>
+```
+
+Then, run the following command to start the docker container :
+
+```
+docker run -it -v $CARAVEL_ROOT:$CARAVEL_ROOT -v $PDK_PATH:$PDK_PATH -e CARAVEL_ROOT=$CARAVEL_ROOT -e PDK_PATH=$PDK_PATH  -u $(id -u $USER):$(id -g $USER) efabless/dv_setup:latest
+```
+
+Then, navigate to the directory where the DV tests reside : 
+
+```bash
+cd $CARAVEL_ROOT/verilog/dv/caravel/user_proj_example
+```
+
+Then, follow the instructions at [Both](#both) to run RTL/GL simulation.
+
+## Local
+
+You will need to export these environment variables: 
+
+```bash
+export GCC_PATH=<gcc-installation-path>
+export PDK_PATH=<pdk-location/sky130A>
+```
+
+Then, follow the instruction at [Both](#both) to run RTL/GL simulation.
+
+## Both
+
+To run RTL simulation for one of the DV tests, 
+
+```bash
+cd <dv-test>
+make
+```
+
+To run gate level simulation for one of the DV tests, 
+
+```bash
+cd <dv-test>
+SIM=GL make
+```
+
+# User Project Example DV
+
+The directory includes four tests for the counter user-project example: 
+
+### IO Ports Test 
+
+* This test is meant to verify that we can configure the pads for the user project area. The firmware configures the lower 8 IO pads in the user space as outputs:
+
+	```c
+	reg_mprj_io_0 =  GPIO_MODE_USER_STD_OUTPUT;
+	reg_mprj_io_1 =  GPIO_MODE_USER_STD_OUTPUT;
+	.....
+	reg_mprj_io_7 =  GPIO_MODE_USER_STD_OUTPUT;
+	```
+
+* Then, the firmware applies the pad configuration by enabling the serial transfer on the shift register responsible for configuring the pads and waits till the transfer is done. 
+	```c
+	reg_mprj_xfer = 1;
+	while (reg_mprj_xfer == 1);
+	```
+
+* The testbench success criteria is that we can observe the counter value on the lower 8 I/O pads. This criteria is checked by the testbench through observing the values on the I/O pads as follows: 
+
+	```verilog
+	wait(mprj_io_0 == 8'h01);
+	wait(mprj_io_0 == 8'h02);
+	wait(mprj_io_0 == 8'h03);
+	....
+	wait(mprj_io_0 == 8'hFF);
+	```
+
+* If the testbench fails, it will print a timeout message to the terminal. 
+
+### Logic Analyzer Test 1
+ 
+* This test is meant to verify that we can use the logic analyzer to monitor and write signals in the user project from the management SoC. Firstly, the firmware configures the upper 16 pads as outputs from the managent SoC, applies the configuration by initiating the serial transfer on the shift register, and writes a value on the pads to indicate the end of pad configuration and the start of the test. 
+
+	```c
+	reg_mprj_io_31 = GPIO_MODE_MGMT_STD_OUTPUT;
+	reg_mprj_io_30 = GPIO_MODE_MGMT_STD_OUTPUT;
+	.....
+	reg_mprj_io_16 = GPIO_MODE_MGMT_STD_OUTPUT;
+
+	reg_mprj_xfer = 1;
+	while (reg_mprj_xfer == 1);
+
+	// Flag start of the test 
+	reg_mprj_datal = 0xAB400000;
+	```
+	
+	This is done to flag the start/success/end of the simulation by writing a certain value to the I/Os which is then checked by the testbench to know whether the test started/ended/succeeded. For example, the testbench checks on the value of the upper 16 I/Os, if it is equal to `16'hAB40`, then we know that the test started.  
+
+	```verilog
+	wait(checkbits == 16'hAB40);
+	$display("LA Test 1 started");
+	```
+	
+* Then, the firmware configures the logic analyzer (LA) probes `[31:0]` as inputs to the management SoC to monitor the counter value, and configure the logic analyzer probes `[63:32]` as outputs from the management SoC (inputs to the user_proj_example) to set the counter initial value. This is done by writing to the LA probes enable registers. 
+
+ 
+	```c
+	reg_la0_ena = 0xFFFFFFFF;    // [31:0] inputs to mgmt_soc
+	reg_la1_ena = 0x00000000;    // [63:32] outputs from mgmt_soc
+	```
+
+* Then, the firmware writes an initial value to the counter through the LA1 data register. Afte writing the counter value, the LA probes are disabled to prevent the counter write signal from being always set to one. 
+
+	```c
+	reg_la1_data = 0x00000000;     // Write zero to count register
+	reg_la1_ena  = 0xFFFFFFFF;     // Disable probes
+	```
+
+* The firmware then waits till the count value exceeds 500 and flags the success of the test by writing `0xAB41` to the upper 16 pads.  The firmware reads the count value through the logic analyzer probes `[31:0]` 
+
+	```c
+	if (reg_la0_data > 0x1F4) {	     // Read current count value through LA
+		reg_mprj_datal = 0xAB410000; // Flag success of the test
+		break;
+	}
+	```
+  
+### Logic Analyzer Test 2
+ 
+* This test is meant to verify that we can drive the clock and reset signals for the user project example through the logic analyzer. In the [user_proj_example](verilog/rtl/user_proj_example.v) RTL, the clock can either be supplied from the `wb_clk_i` or from the logic analyzer through bit `[64]`. Similarly, the reset signal can be supplied from the `wb_rst_i` or through `LA[65]`.  The firmware configures the clk and reset LA probes as outputs from the management SoC by writing to the LA2 enable register. 
+
+	```c
+	reg_la2_ena  = 0xFFFFFFFC; 	// Configure LA[64] LA[65] as outputs from the cpu
+	```
+
+* Then, the firmware supplies both clock reset signals through LA2 data register. First, both are set to one. Then, reset is driven to zero and the clock is toggled for 6 clock cycles. 
+
+	```c
+	reg_la2_data = 0x00000003;	// Write one to LA[64] and LA[65]
+	for (i=0; i<11; i=i+1) {   	// Toggle clk & de-assert reset
+		clk = !clk;               	
+		reg_la2_data = 0x00000000 | clk;
+	}
+	```
+* The testbench success criteria is that the firmware reads a count value of five through the LA probes. 
+	```c
+	if (reg_la0_data == 0x05) {
+		reg_mprj_datal = 0xAB610000;   // FLag success of the test
+	}
+	```
+	
+### Wishbone Test
+
+* This test is meant to verify that we can read and write to the count register through the wishbone port. The firmware writes a value of `0x2710` to the count register, then reads back the count value after some time. The read and write transactions happen through the management SoC wishbone bus and are initiated by either writing or reading from the user project address on the wishbone bus. 
+
+	```c
+	reg_mprj_slave = 0x00002710;           // Write to the count register through wishbone port
+	if (reg_mprj_slave == 0x274F) {	       // Read from the count register through wishbone port
+		reg_mprj_datal = 0xAB610000;   // FLag success of the test
+	} else {
+		reg_mprj_datal = 0xAB600000;   // FLag Failuer of the test
+	}
+	```
\ No newline at end of file
diff --git a/verilog/dv/io_ports/Makefile b/verilog/dv/io_ports/Makefile
new file mode 100644
index 0000000..8f8cfdb
--- /dev/null
+++ b/verilog/dv/io_ports/Makefile
@@ -0,0 +1,79 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+## Caravel Pointers
+CARAVEL_PATH ?= ../../../caravel
+CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
+CARAVEL_VERILOG_PATH  = $(CARAVEL_PATH)/verilog
+CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
+CARAVEL_GL_PATH = $(CARAVEL_VERILOG_PATH)/gl
+CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+
+## User Project Pointers
+UPRJ_VERILOG_PATH ?= ../../../verilog
+UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
+UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
+UPRJ_BEHAVIOURAL_MODELS = ../
+
+## RISCV GCC 
+GCC_PATH?=/ef/apps/bin
+GCC_PREFIX?=riscv32-unknown-elf
+PDK_PATH?=/ef/tech/SW/sky130A
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+
+.SUFFIXES:
+
+PATTERN = io_ports
+
+all:  ${PATTERN:=.vcd}
+
+hex:  ${PATTERN:=.hex}
+
+%.vvp: %_tb.v %.hex
+ifeq ($(SIM),RTL)
+	iverilog -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) \
+	$< -o $@ 
+else  
+	iverilog -DFUNCTIONAL -DSIM -DGL-I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_GL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_GL_PATH) \
+	$< -o $@ 
+endif
+
+%.vcd: %.vvp
+	vvp $<
+
+%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
+	${GCC_PATH}/${GCC_PREFIX}-gcc -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
+
+%.hex: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@ 
+	# to fix flash base address
+	sed -i 's/@10000000/@00000000/g' $@
+
+%.bin: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
+
+.PHONY: clean hex all
diff --git a/verilog/dv/user_proj_example/io_ports/io_ports.c b/verilog/dv/io_ports/io_ports.c
similarity index 97%
rename from verilog/dv/user_proj_example/io_ports/io_ports.c
rename to verilog/dv/io_ports/io_ports.c
index f0542f6..3574cd7 100644
--- a/verilog/dv/user_proj_example/io_ports/io_ports.c
+++ b/verilog/dv/io_ports/io_ports.c
@@ -15,7 +15,7 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#include "../../defs.h"
+#include "../../../caravel/verilog/dv/caravel/defs.h"
 
 /*
 	IO Test:
diff --git a/verilog/dv/user_proj_example/io_ports/io_ports_tb.v b/verilog/dv/io_ports/io_ports_tb.v
similarity index 98%
rename from verilog/dv/user_proj_example/io_ports/io_ports_tb.v
rename to verilog/dv/io_ports/io_ports_tb.v
index e644347..f7628bc 100644
--- a/verilog/dv/user_proj_example/io_ports/io_ports_tb.v
+++ b/verilog/dv/io_ports/io_ports_tb.v
@@ -17,6 +17,7 @@
 
 `timescale 1 ns / 1 ps
 
+`include "uprj_netlists.v"
 `include "caravel_netlists.v"
 `include "spiflash.v"
 
diff --git a/verilog/dv/la_test1/Makefile b/verilog/dv/la_test1/Makefile
new file mode 100644
index 0000000..cf7671a
--- /dev/null
+++ b/verilog/dv/la_test1/Makefile
@@ -0,0 +1,79 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+## Caravel Pointers
+CARAVEL_PATH ?= ../../../caravel
+CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
+CARAVEL_VERILOG_PATH  = $(CARAVEL_PATH)/verilog
+CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
+CARAVEL_GL_PATH = $(CARAVEL_VERILOG_PATH)/gl
+CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+
+## User Project Pointers
+UPRJ_VERILOG_PATH ?= ../../../verilog
+UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
+UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
+UPRJ_BEHAVIOURAL_MODELS = ../
+
+## RISCV GCC 
+GCC_PATH?=/ef/apps/bin
+GCC_PREFIX?=riscv32-unknown-elf
+PDK_PATH?=/ef/tech/SW/sky130A
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+
+.SUFFIXES:
+
+PATTERN = la_test1
+
+all:  ${PATTERN:=.vcd}
+
+hex:  ${PATTERN:=.hex}
+
+%.vvp: %_tb.v %.hex
+ifeq ($(SIM),RTL)
+	iverilog -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) \
+	$< -o $@ 
+else  
+	iverilog -DFUNCTIONAL -DSIM -DGL-I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_GL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_GL_PATH) \
+	$< -o $@ 
+endif
+
+%.vcd: %.vvp
+	vvp $<
+
+%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
+	${GCC_PATH}/${GCC_PREFIX}-gcc -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
+
+%.hex: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@ 
+	# to fix flash base address
+	sed -i 's/@10000000/@00000000/g' $@
+
+%.bin: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
+
+.PHONY: clean hex all
diff --git a/verilog/dv/user_proj_example/la_test1/la_test1.c b/verilog/dv/la_test1/la_test1.c
similarity index 97%
rename from verilog/dv/user_proj_example/la_test1/la_test1.c
rename to verilog/dv/la_test1/la_test1.c
index c5d47bc..257301c 100644
--- a/verilog/dv/user_proj_example/la_test1/la_test1.c
+++ b/verilog/dv/la_test1/la_test1.c
@@ -15,8 +15,8 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#include "../../defs.h"
-#include "../../stub.c"
+#include "../../../caravel/verilog/dv/caravel/defs.h"
+#include "../../../caravel/verilog/dv/caravel/stub.c"
 
 // --------------------------------------------------------
 
diff --git a/verilog/dv/user_proj_example/la_test1/la_test1_tb.v b/verilog/dv/la_test1/la_test1_tb.v
similarity index 98%
rename from verilog/dv/user_proj_example/la_test1/la_test1_tb.v
rename to verilog/dv/la_test1/la_test1_tb.v
index 125f842..626e390 100644
--- a/verilog/dv/user_proj_example/la_test1/la_test1_tb.v
+++ b/verilog/dv/la_test1/la_test1_tb.v
@@ -17,6 +17,7 @@
 
 `timescale 1 ns / 1 ps
 
+`include "uprj_netlists.v"
 `include "caravel_netlists.v"
 `include "spiflash.v"
 `include "tbuart.v"
diff --git a/verilog/dv/la_test2/Makefile b/verilog/dv/la_test2/Makefile
new file mode 100644
index 0000000..da018a9
--- /dev/null
+++ b/verilog/dv/la_test2/Makefile
@@ -0,0 +1,79 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+## Caravel Pointers
+CARAVEL_PATH ?= ../../../caravel
+CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
+CARAVEL_VERILOG_PATH  = $(CARAVEL_PATH)/verilog
+CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
+CARAVEL_GL_PATH = $(CARAVEL_VERILOG_PATH)/gl
+CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+
+## User Project Pointers
+UPRJ_VERILOG_PATH ?= ../../../verilog
+UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
+UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
+UPRJ_BEHAVIOURAL_MODELS = ../
+
+## RISCV GCC 
+GCC_PATH?=/ef/apps/bin
+GCC_PREFIX?=riscv32-unknown-elf
+PDK_PATH?=/ef/tech/SW/sky130A
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+
+.SUFFIXES:
+
+PATTERN = la_test2
+
+all:  ${PATTERN:=.vcd}
+
+hex:  ${PATTERN:=.hex}
+
+%.vvp: %_tb.v %.hex
+ifeq ($(SIM),RTL)
+	iverilog -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) \
+	$< -o $@ 
+else  
+	iverilog -DFUNCTIONAL -DSIM -DGL-I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_GL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_GL_PATH) \
+	$< -o $@ 
+endif
+
+%.vcd: %.vvp
+	vvp $<
+
+%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
+	${GCC_PATH}/${GCC_PREFIX}-gcc -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
+
+%.hex: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@ 
+	# to fix flash base address
+	sed -i 's/@10000000/@00000000/g' $@
+
+%.bin: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
+
+.PHONY: clean hex all
diff --git a/verilog/dv/user_proj_example/la_test2/la_test2.c b/verilog/dv/la_test2/la_test2.c
similarity index 96%
rename from verilog/dv/user_proj_example/la_test2/la_test2.c
rename to verilog/dv/la_test2/la_test2.c
index ef1b5e9..7c0556f 100644
--- a/verilog/dv/user_proj_example/la_test2/la_test2.c
+++ b/verilog/dv/la_test2/la_test2.c
@@ -15,8 +15,8 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#include "../../defs.h"
-#include "../../stub.c"
+#include "../../../caravel/verilog/dv/caravel/defs.h"
+#include "../../../caravel/verilog/dv/caravel/stub.c"
 
 /*
 	MPRJ LA Test:
diff --git a/verilog/dv/user_proj_example/la_test2/la_test2_tb.v b/verilog/dv/la_test2/la_test2_tb.v
similarity index 98%
rename from verilog/dv/user_proj_example/la_test2/la_test2_tb.v
rename to verilog/dv/la_test2/la_test2_tb.v
index d004269..e09905e 100644
--- a/verilog/dv/user_proj_example/la_test2/la_test2_tb.v
+++ b/verilog/dv/la_test2/la_test2_tb.v
@@ -17,6 +17,7 @@
 
 `timescale 1 ns / 1 ps
 
+`include "uprj_netlists.v"
 `include "caravel_netlists.v"
 `include "spiflash.v"
 
diff --git a/verilog/dv/user_proj_example/README.md b/verilog/dv/user_proj_example/README.md
deleted file mode 100644
index 503b8f4..0000000
--- a/verilog/dv/user_proj_example/README.md
+++ /dev/null
@@ -1,37 +0,0 @@
-<!---
-# SPDX-FileCopyrightText: 2020 Efabless Corporation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
--->
-# Mega-Project Counter Tests
-
-The directory includes three tests for the counter mega-project example: 
-
-1) IO Ports Test: 
-
-	* Configures the user space lower 8 IO pins as outputs
-	* Observes the counter value through the configured pins in the testbench
-
- 2) Logic Analyzer Test 1:
- 
-	* Configures LA probes [31:0] as inputs to the management SoC to monitor the counter value 
-	* Configures LA probes [63:32] as outputs from the management SoC to set the counter initial value 
-	* Flags when counter value exceeds 500 through the management SoC gpio
-	* Outputs message to the UART when the test concludes successfuly
-  
- 3) Logic Analyzer Test 2:
- 
-	* Configures LA probes [64] and [65] as outputs from the management SoC to set counter clock and reset values
-	* Provides counter clock and monitors the counter value after five clock cycles
diff --git a/verilog/dv/user_proj_example/io_ports/Makefile b/verilog/dv/user_proj_example/io_ports/Makefile
deleted file mode 100644
index 321de72..0000000
--- a/verilog/dv/user_proj_example/io_ports/Makefile
+++ /dev/null
@@ -1,67 +0,0 @@
-# SPDX-FileCopyrightText: 2020 Efabless Corporation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-
-FIRMWARE_PATH = ../..
-VERILOG_PATH = ../../../..
-RTL_PATH = $(VERILOG_PATH)/rtl
-IP_PATH = ../../../../ip
-BEHAVIOURAL_MODELS = ../../ 
-
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/ef/tech/SW/sky130A
-
-SIM?=RTL
-
-.SUFFIXES:
-
-PATTERN = io_ports
-
-all:  ${PATTERN:=.vcd}
-
-hex:  ${PATTERN:=.hex}
-
-%.vvp: %_tb.v %.hex
-ifeq ($(SIM),RTL)
-	iverilog -DFUNCTIONAL -DSIM -I $(BEHAVIOURAL_MODELS) \
-	-I $(PDK_PATH) -I $(IP_PATH) -I $(RTL_PATH) \
-	$< -o $@ 
-else  
-	iverilog -DFUNCTIONAL -DSIM -DGL -I $(BEHAVIOURAL_MODELS) \
-	-I $(PDK_PATH) -I $(IP_PATH) -I $(VERILOG_PATH) -I $(RTL_PATH) \
-	$< -o $@ 
-endif
-
-%.vcd: %.vvp
-	vvp $<
-
-%.elf: %.c $(FIRMWARE_PATH)/sections.lds $(FIRMWARE_PATH)/start.s
-	${GCC_PATH}/${GCC_PREFIX}-gcc -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(FIRMWARE_PATH)/start.s $<
-
-%.hex: %.elf
-	${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@ 
-	# to fix flash base address
-	sed -i 's/@10000000/@00000000/g' $@
-
-%.bin: %.elf
-	${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
-
-# ---- Clean ----
-
-clean:
-	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
-
-.PHONY: clean hex all
diff --git a/verilog/dv/user_proj_example/la_test1/Makefile b/verilog/dv/user_proj_example/la_test1/Makefile
deleted file mode 100644
index e9ad798..0000000
--- a/verilog/dv/user_proj_example/la_test1/Makefile
+++ /dev/null
@@ -1,68 +0,0 @@
-# SPDX-FileCopyrightText: 2020 Efabless Corporation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-
-
-FIRMWARE_PATH = ../..
-VERILOG_PATH = ../../../..
-RTL_PATH = $(VERILOG_PATH)/rtl
-IP_PATH = ../../../../ip
-BEHAVIOURAL_MODELS = ../../ 
-
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/ef/tech/SW/sky130A
-
-SIM?=RTL
-
-.SUFFIXES:
-
-PATTERN = la_test1
-
-all:  ${PATTERN:=.vcd}
-
-hex:  ${PATTERN:=.hex}
-
-%.vvp: %_tb.v %.hex
-ifeq ($(SIM),RTL)
-	iverilog -DFUNCTIONAL -DSIM -I $(BEHAVIOURAL_MODELS) \
-	-I $(PDK_PATH) -I $(IP_PATH) -I $(RTL_PATH) \
-	$< -o $@ 
-else  
-	iverilog -DFUNCTIONAL -DSIM -DGL -I $(BEHAVIOURAL_MODELS) \
-	-I $(PDK_PATH) -I $(IP_PATH) -I $(VERILOG_PATH) -I $(RTL_PATH) \
-	$< -o $@ 
-endif
-
-%.vcd: %.vvp
-	vvp $<
-
-%.elf: %.c $(FIRMWARE_PATH)/sections.lds $(FIRMWARE_PATH)/start.s
-	${GCC_PATH}/${GCC_PREFIX}-gcc -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(FIRMWARE_PATH)/start.s $<
-
-%.hex: %.elf
-	${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@ 
-	# to fix flash base address
-	sed -i 's/@10000000/@00000000/g' $@
-
-%.bin: %.elf
-	${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
-
-# ---- Clean ----
-
-clean:
-	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
-
-.PHONY: clean hex all
diff --git a/verilog/dv/user_proj_example/la_test2/Makefile b/verilog/dv/user_proj_example/la_test2/Makefile
deleted file mode 100644
index 189dfa4..0000000
--- a/verilog/dv/user_proj_example/la_test2/Makefile
+++ /dev/null
@@ -1,68 +0,0 @@
-# SPDX-FileCopyrightText: 2020 Efabless Corporation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-
-
-FIRMWARE_PATH = ../..
-VERILOG_PATH = ../../../..
-RTL_PATH = $(VERILOG_PATH)/rtl
-IP_PATH = ../../../../ip
-BEHAVIOURAL_MODELS = ../../ 
-
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/ef/tech/SW/sky130A
-
-SIM?=RTL
-
-.SUFFIXES:
-
-PATTERN = la_test2
-
-all:  ${PATTERN:=.vcd}
-
-hex:  ${PATTERN:=.hex}
-
-%.vvp: %_tb.v %.hex
-ifeq ($(SIM),RTL)
-	iverilog -DFUNCTIONAL -DSIM -I $(BEHAVIOURAL_MODELS) \
-	-I $(PDK_PATH) -I $(IP_PATH) -I $(RTL_PATH) \
-	$< -o $@ 
-else  
-	iverilog -DFUNCTIONAL -DSIM -DGL -I $(BEHAVIOURAL_MODELS) \
-	-I $(PDK_PATH) -I $(IP_PATH) -I $(VERILOG_PATH) -I $(RTL_PATH) \
-	$< -o $@ 
-endif
-
-%.vcd: %.vvp
-	vvp $<
-
-%.elf: %.c $(FIRMWARE_PATH)/sections.lds $(FIRMWARE_PATH)/start.s
-	${GCC_PATH}/${GCC_PREFIX}-gcc -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(FIRMWARE_PATH)/start.s $<
-
-%.hex: %.elf
-	${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@ 
-	# to fix flash base address
-	sed -i 's/@10000000/@00000000/g' $@
-
-%.bin: %.elf
-	${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
-
-# ---- Clean ----
-
-clean:
-	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
-
-.PHONY: clean hex all
diff --git a/verilog/dv/wb_port/Makefile b/verilog/dv/wb_port/Makefile
new file mode 100644
index 0000000..78d4799
--- /dev/null
+++ b/verilog/dv/wb_port/Makefile
@@ -0,0 +1,79 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+## Caravel Pointers
+CARAVEL_PATH ?= ../../../caravel
+CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
+CARAVEL_VERILOG_PATH  = $(CARAVEL_PATH)/verilog
+CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
+CARAVEL_GL_PATH = $(CARAVEL_VERILOG_PATH)/gl
+CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+
+## User Project Pointers
+UPRJ_VERILOG_PATH ?= ../../../verilog
+UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
+UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
+UPRJ_BEHAVIOURAL_MODELS = ../
+
+## RISCV GCC 
+GCC_PATH?=/ef/apps/bin
+GCC_PREFIX?=riscv32-unknown-elf
+PDK_PATH?=/ef/tech/SW/sky130A
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+
+.SUFFIXES:
+
+PATTERN = wb_port
+
+all:  ${PATTERN:=.vcd}
+
+hex:  ${PATTERN:=.hex}
+
+%.vvp: %_tb.v %.hex
+ifeq ($(SIM),RTL)
+	iverilog -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) \
+	$< -o $@ 
+else  
+	iverilog -DFUNCTIONAL -DSIM -DGL-I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_GL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_GL_PATH) \
+	$< -o $@ 
+endif
+
+%.vcd: %.vvp
+	vvp $<
+
+%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
+	${GCC_PATH}/${GCC_PREFIX}-gcc -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
+
+%.hex: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@ 
+	# to fix flash base address
+	sed -i 's/@10000000/@00000000/g' $@
+
+%.bin: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
+
+.PHONY: clean hex all
diff --git a/verilog/dv/wb_port/wb_port.c b/verilog/dv/wb_port/wb_port.c
new file mode 100644
index 0000000..a742477
--- /dev/null
+++ b/verilog/dv/wb_port/wb_port.c
@@ -0,0 +1,88 @@
+/*
+ * SPDX-FileCopyrightText: 2020 Efabless Corporation
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "../../../caravel/verilog/dv/caravel/defs.h"
+#include "../../../caravel/verilog/dv/caravel/stub.c"
+
+/*
+	Wishbone Test:
+		- Configures MPRJ lower 8-IO pins as outputs
+		- Checks counter value through the wishbone port
+*/
+int i = 0; 
+int clk = 0;
+
+void main()
+{
+
+	/* 
+	IO Control Registers
+	| DM     | VTRIP | SLOW  | AN_POL | AN_SEL | AN_EN | MOD_SEL | INP_DIS | HOLDH | OEB_N | MGMT_EN |
+	| 3-bits | 1-bit | 1-bit | 1-bit  | 1-bit  | 1-bit | 1-bit   | 1-bit   | 1-bit | 1-bit | 1-bit   |
+	Output: 0000_0110_0000_1110  (0x1808) = GPIO_MODE_USER_STD_OUTPUT
+	| DM     | VTRIP | SLOW  | AN_POL | AN_SEL | AN_EN | MOD_SEL | INP_DIS | HOLDH | OEB_N | MGMT_EN |
+	| 110    | 0     | 0     | 0      | 0      | 0     | 0       | 1       | 0     | 0     | 0       |
+	
+	 
+	Input: 0000_0001_0000_1111 (0x0402) = GPIO_MODE_USER_STD_INPUT_NOPULL
+	| DM     | VTRIP | SLOW  | AN_POL | AN_SEL | AN_EN | MOD_SEL | INP_DIS | HOLDH | OEB_N | MGMT_EN |
+	| 001    | 0     | 0     | 0      | 0      | 0     | 0       | 0       | 0     | 1     | 0       |
+	*/
+
+	/* Set up the housekeeping SPI to be connected internally so	*/
+	/* that external pin changes don't affect it.			*/
+
+	reg_spimaster_config = 0xa002;	// Enable, prescaler = 2,
+                                        // connect to housekeeping SPI
+
+	// Connect the housekeeping SPI to the SPI master
+	// so that the CSB line is not left floating.  This allows
+	// all of the GPIO pins to be used for user functions.
+
+    reg_mprj_io_31 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_30 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_29 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_28 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_27 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_26 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_25 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_24 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_23 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_22 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_21 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_20 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_19 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_18 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_17 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_16 = GPIO_MODE_MGMT_STD_OUTPUT;
+
+     /* Apply configuration */
+    reg_mprj_xfer = 1;
+    while (reg_mprj_xfer == 1);
+
+	reg_la2_ena = 0xFFFFFFFF;    // [95:64]
+
+    // Flag start of the test
+	reg_mprj_datal = 0xAB600000;
+
+    reg_mprj_slave = 0x00002710;
+    if (reg_mprj_slave == 0x274F) {
+        reg_mprj_datal = 0xAB610000;
+    } else {
+        reg_mprj_datal = 0xAB600000;
+    }
+}
\ No newline at end of file
diff --git a/verilog/dv/user_proj_example/io_ports/io_ports_tb.v b/verilog/dv/wb_port/wb_port_tb.v
similarity index 72%
copy from verilog/dv/user_proj_example/io_ports/io_ports_tb.v
copy to verilog/dv/wb_port/wb_port_tb.v
index e644347..b32f900 100644
--- a/verilog/dv/user_proj_example/io_ports/io_ports_tb.v
+++ b/verilog/dv/wb_port/wb_port_tb.v
@@ -17,25 +17,25 @@
 
 `timescale 1 ns / 1 ps
 
+`include "uprj_netlists.v"
 `include "caravel_netlists.v"
 `include "spiflash.v"
 
-module io_ports_tb;
+module wb_port_tb;
 	reg clock;
 	reg RSTB;
 	reg CSB;
 	reg power1, power2;
 	reg power3, power4;
 
-    	wire gpio;
-    	wire [37:0] mprj_io;
+	wire gpio;
+	wire [37:0] mprj_io;
 	wire [7:0] mprj_io_0;
+	wire [15:0] checkbits;
 
-	assign mprj_io_0 = mprj_io[7:0];
-	// assign mprj_io_0 = {mprj_io[8:4],mprj_io[2:0]};
+	assign checkbits = mprj_io[31:16];
 
 	assign mprj_io[3] = (CSB == 1'b1) ? 1'b1 : 1'bz;
-	// assign mprj_io[3] = 1'b1;
 
 	// External clock is used by default.  Make this artificially fast for the
 	// simulation.  Normally this would be a slow clock and the digital PLL
@@ -48,43 +48,32 @@
 	end
 
 	initial begin
-		$dumpfile("io_ports.vcd");
-		$dumpvars(0, io_ports_tb);
+		$dumpfile("wb_port.vcd");
+		$dumpvars(0, wb_port_tb);
 
 		// Repeat cycles of 1000 clock edges as needed to complete testbench
-		repeat (25) begin
+		repeat (30) begin
 			repeat (1000) @(posedge clock);
 			// $display("+1000 cycles");
 		end
 		$display("%c[1;31m",27);
 		`ifdef GL
-			$display ("Monitor: Timeout, Test Mega-Project IO Ports (GL) Failed");
+			$display ("Monitor: Timeout, Test Mega-Project WB Port (GL) Failed");
 		`else
-			$display ("Monitor: Timeout, Test Mega-Project IO Ports (RTL) Failed");
+			$display ("Monitor: Timeout, Test Mega-Project WB Port (RTL) Failed");
 		`endif
 		$display("%c[0m",27);
 		$finish;
 	end
 
 	initial begin
-	    // Observe Output pins [7:0]
-	    wait(mprj_io_0 == 8'h01);
-	    wait(mprj_io_0 == 8'h02);
-	    wait(mprj_io_0 == 8'h03);
-    	    wait(mprj_io_0 == 8'h04);
-	    wait(mprj_io_0 == 8'h05);
-            wait(mprj_io_0 == 8'h06);
-	    wait(mprj_io_0 == 8'h07);
-            wait(mprj_io_0 == 8'h08);
-	    wait(mprj_io_0 == 8'h09);
-            wait(mprj_io_0 == 8'h0A);   
-	    wait(mprj_io_0 == 8'hFF);
-	    wait(mprj_io_0 == 8'h00);
-		
+	   wait(checkbits == 16'h AB60);
+		$display("Monitor: MPRJ-Logic WB Started");
+		wait(checkbits == 16'h AB61);
 		`ifdef GL
-	    	$display("Monitor: Test 1 Mega-Project IO (GL) Passed");
+	    	$display("Monitor: Mega-Project WB (GL) Passed");
 		`else
-		    $display("Monitor: Test 1 Mega-Project IO (RTL) Passed");
+		    $display("Monitor: Mega-Project WB (RTL) Passed");
 		`endif
 	    $finish;
 	end
@@ -145,7 +134,7 @@
 		.vssd2	  (VSS),
 		.clock	  (clock),
 		.gpio     (gpio),
-        	.mprj_io  (mprj_io),
+        .mprj_io  (mprj_io),
 		.flash_csb(flash_csb),
 		.flash_clk(flash_clk),
 		.flash_io0(flash_io0),
@@ -154,7 +143,7 @@
 	);
 
 	spiflash #(
-		.FILENAME("io_ports.hex")
+		.FILENAME("wb_port.hex")
 	) spiflash (
 		.csb(flash_csb),
 		.clk(flash_clk),
@@ -165,4 +154,4 @@
 	);
 
 endmodule
-`default_nettype wire
+`default_nettype wire
\ No newline at end of file
diff --git a/verilog/rtl/uprj_netlists.v b/verilog/rtl/uprj_netlists.v
new file mode 100644
index 0000000..3b7eac0
--- /dev/null
+++ b/verilog/rtl/uprj_netlists.v
@@ -0,0 +1,11 @@
+
+// Include caravel global defines for the number of the user project IO pads 
+`include "defines.v"
+
+`ifdef GL
+    `include "gl/user_project_wrapper.v"
+    `include "gl/user_proj_example.v"
+`else
+    `include "user_project_wrapper.v"
+    `include "user_proj_example.v"
+`endif
\ No newline at end of file