diff --git a/verilog/gl/sky130_ef_sc_hd__fakediode_2.v b/verilog/gl/sky130_ef_sc_hd__fakediode_2.v
new file mode 100644
index 0000000..4ddd77a
--- /dev/null
+++ b/verilog/gl/sky130_ef_sc_hd__fakediode_2.v
@@ -0,0 +1,97 @@
+/**
+ * Copyright 2020 The SkyWater PDK Authors
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     https://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+`ifndef SKY130_EF_SC_HD__FAKEDIODE_2_V
+`define SKY130_EF_SC_HD__FAKEDIODE_2_V
+
+/**
+ * fakediode: Antenna tie-down diode with no connection between the DIODE
+ * pin and the diode.  This is just the sky130_fd_sc_hd__diode_2 cell with
+ * the contacts removed between the diode and the pin.  It is used by the
+ * openlane synthesis flow to preemptively put antenna tie-downs close to
+ * every pin without making a connection.  If the net needs an antenna
+ * tiedown, the fakediode cell can be replaced by the real diode cell.
+ *
+ * Verilog wrapper for diode with size of 2 units.  Note that the wrapper
+ * is around the original SkyWater diode base cell;  because the diode
+ * has no function in verilog, there is no difference between the verilog
+ * definitions of the diode and fake diode other than the cell name.
+ *
+ */
+
+`timescale 1ns / 1ps
+`default_nettype none
+
+
+`ifdef USE_POWER_PINS
+/*********************************************************/
+
+`celldefine
+module sky130_ef_sc_hd__fakediode_2 (
+    DIODE,
+    VPWR ,
+    VGND ,
+    VPB  ,
+    VNB
+);
+
+    input DIODE;
+    input VPWR ;
+    input VGND ;
+    input VPB  ;
+    input VNB  ;
+    sky130_fd_sc_hd__diode base (
+        .DIODE(DIODE),
+        .VPWR(VPWR),
+        .VGND(VGND),
+        .VPB(VPB),
+        .VNB(VNB)
+    );
+
+endmodule
+`endcelldefine
+
+/*********************************************************/
+`else // If not USE_POWER_PINS
+/*********************************************************/
+
+`celldefine
+module sky130_ef_sc_hd__fakediode_2 (
+    DIODE
+);
+
+    input DIODE;
+
+    // Voltage supply signals
+    supply1 VPWR;
+    supply0 VGND;
+    supply1 VPB ;
+    supply0 VNB ;
+
+    sky130_fd_sc_hd__diode base (
+        .DIODE(DIODE)
+    );
+
+endmodule
+`endcelldefine
+
+/*********************************************************/
+`endif // USE_POWER_PINS
+
+`default_nettype wire
+`endif  // SKY130_EF_SC_HD__FAKEDIODE_2_V
diff --git a/verilog/rtl/uprj_netlists.v b/verilog/rtl/uprj_netlists.v
index eb5c577..c246d70 100644
--- a/verilog/rtl/uprj_netlists.v
+++ b/verilog/rtl/uprj_netlists.v
@@ -21,7 +21,8 @@
     // Assume default net type to be wire because GL netlists don't have the wire definitions
     `default_nettype wire
     `include "gl/user_project_wrapper.v"
-    `include "gl/user_proj_example.v"
+    `include "gl/subservient_wrapped.v"
+    `include "gl/sky130_ef_sc_hd__fakediode_2.v"
 `else
     `include "user_project_wrapper.v"
     `include "serv_alu.v"
@@ -49,4 +50,4 @@
     `include "subservient.v"
     `include "ff_ram.v"
     `include "subservient_wrapped.v"
-`endif
\ No newline at end of file
+`endif