General Purpose Bandgap Reference Circuit - avsdbgp_3v3_sky130_v2

A Bandgap Reference is an analog circuit, which is used to provide a constant output reference voltage being independent of Temperature, Process and Supply voltage variations. The analog IP avsdbgp_3v3 is a General Purpose Bandgap Reference ciruit, which is designed using Sky130nm technology in this project.

For detailed information regarding the Bandgap Reference circuit click here. The Design specifications provided for avsdbgp_3v3 can be found here.

Table of Contents

• Performance parameters Bandgap Reference IP

• Circuit Implementation of Bandgap Reference IP

  • Block Diagram of Bandgap Reference IP
  • Schematic of Bandgap Reference IP

• Downloading the files on your System

• Pre-Layout Simulation of Bandgap Reference IP circuit using Ngspice

  • Ngspice
  • Pre-Layout Simulation plots of Bandgap Reference IP circuit
  • Vbgp v/s Temperature [ -40C - 140C] @ RL = 100M ohms plot
  • Vbgp v/s VDD [ 2V - 4V] @ RL = 100M ohms plot
  • Temperature Coefficient of Vbgp v/s Temperature [ -40C - 140C] @ RL = 100M ohms plot
  • Voltage Coefficient of Vbgp v/s VDD [ 2V - 4V] @ RL = 100M ohms plot
  • Start-Up Time of Vbgp @ RL = 100M ohms plot
  • On-Off-Current of Vbgp wrt Enable @ RL = 100M ohms plot

• BGR Layout

  • Magic
  • Layout

• Post-Layout Simulation of Bandgap Reference IP circuit using Ngspice

  • Vbgp v/s Temperature [ -40C - 140C] @ RL = 100M ohms plot
  • Vbgp v/s VDD [ 2V - 4V] @ RL = 100M ohms plot
  • Temperature Coefficient of Vbgp v/s Temperature [ -40C - 140C] @ RL = 100M ohms plot
  • Voltage Coefficient of Vbgp v/s VDD [ 2V - 4V] @ RL = 100M ohms plot
  • Start-Up Time of Vbgp @ RL = 100M ohms plot
  • On-Off-Current of Vbgp wrt Enable @ RL = 100M ohms plot

Performance parameters of Bandgap Reference IP

Parameter	Description	Min	Type	Max	Unit	Condition
VBGP	Output reference voltage	1.19490	1.19756	1.19764	Volt	T= -40 to 140C, VDD=3.3V
VBGP	Output reference voltage	1.11400	1.19756	1.21933	Volt	VDD=2V to VDD=4V, T=27C
VDD	Supply Voltage		3.3		Volt	T=-40C to 125C
IDD	Supply Current		21.9636		uA	EN=1
IDD	Supply Current		24.4		pA	EN=0
RL	Load Resistance		100		Mohm	VDD=3.3V, T=27C

Circuit Implementation of Bandgap Reference IP

Block Diagram of Bandgap Reference IP

Schematic of Bandgap Reference IP

Downloading the files on your System

The files from this repository can be downloaded and used by the following commands :-

sudo apt install -y git

git clone https://github.com/vsdip/avsdbgp_3v3_sky130_v2.git

Pre-Layout Simulation of Bandgap Reference IP circuit

The circuit implementation of Bandgap reference IP avsdbgp_3v3 is simulated using Ngspice to analyse its performance according to the Design Specifications provided.

Ngspice

sudo apt-get install -y ngspice

After successful installation, to invoke Ngspice type the following command on the terminal window.

ngspice <circuit file to be simulated>

Pre- Layout Simulation plots of Bandgap Reference IP circuit

To simulate the files for Pre- Layout simulations

cd avsdbgp_3v3_sky130_v2/Pre_Layout_Simulations/Circuits/

Vbgp v/s Temperature [ -40C - 140C] @ RL = 100M ohms plot

ngspice temp_avsdbgp_3v3.cir

Vbgp v/s VDD [ 2V - 4V] @ RL = 100M ohms plot

ngspice vdd_variation_avsdbgp_3v3.cir

Temperature Coefficient of Vbgp v/s Temperature [ -40C - 140C] @ RL = 100M ohms plot

ngspice Temp_coeff_avsdbgp_3v3.cir

Voltage Coefficient of Vbgp v/s VDD [ 2V - 4V] @ RL = 100M ohms plot

ngspice voltage_coeff_avsdbgp_3v3.cir

Start-Up Time of Vbgp @ RL = 100M ohms plot

ngspice Start_up_avsdbgp_3v3.cir

On-Off-Current of Vbgp wrt Enable @ RL = 100M ohms plot

ngspice enable_current.cir

BGR Layout

Magic

The Layout for the circuit was done using Magic Layout editor tool. To observe the layout, install magic using the following commands :-

sudo wget "http://opencircuitdesign.com/magic/archive/magic-8.3.122.tgz"

tar -xvzf magic-8.3.122.tgz

cd magic-8.3.122

sudo ./configure

sudo make

sudo make install

Layout

After successful installation, type:-

cd avsdbgp_3v3_sky130_v2/Layout/

magic -T ../libs/sky130A.tech BGR.mag

Post-Layout Simulation plots of Bandgap Reference IP circuit

To simulate the files for Post-Layout simulations using ngspice :-

cd avsdbgp_3v3_sky130_v2/Post_Layout_Simulations/Circuits/

Vbgp v/s Temperature [ -40C - 140C] @ RL = 100M ohms plot

ngspice temp_avsdbgp_3v3.spice

Vbgp v/s VDD [ 2V - 4V] @ RL = 100M ohms plot

ngspice vdd_variation_avsdbgp_3v3.spice

Temperature Coefficient of Vbgp v/s Temperature [ -40C - 140C] @ RL = 100M ohms plot

ngspice Temp_coeff_avsdbgp_3v3.spice

Voltage Coefficient of Vbgp v/s VDD [ 2V - 4V] @ RL = 100M ohms plot

ngspice voltage_coeff_avsdbgp_3v3.spice

Start-Up Time of Vbgp @ RL = 100M ohms plot

ngspice Start_up_avsdbgp_3v3.spice

Author

• Anmol Purty

Acknowledgements

• Kunal Ghosh, Co-founder of VLSI System Design (VSD) Corp. Pvt. Ltd.
• Tim Edwards, Senior Vice President of Analog and Design at efabless corporation.
• Sheryl Corina Serrao, Undergraduate Student, Mumbai University.

Contact Information

• Anmol Purty - nmlpurty@gmail.com