/**
 * Execution stage
 *
 * Execution block: Hosts ALU and MUL/DIV unit
 */
module brq_exu #(
    parameter brq_pkg::rv32m_e RV32M           = brq_pkg::RV32MFast,
    parameter brq_pkg::rv32b_e RV32B           = brq_pkg::RV32BNone,
    parameter bit              BranchTargetALU = 0
) (
    input  logic                  clk_i,
    input  logic                  rst_ni,

    // ALU
    input  brq_pkg::alu_op_e      alu_operator_i,
    input  logic [31:0]           alu_operand_a_i,
    input  logic [31:0]           alu_operand_b_i,
    input  logic                  alu_instr_first_cycle_i,

    // Branch Target ALU
    // All of these signals are unusued when BranchTargetALU == 0
    input  logic [31:0]           bt_a_operand_i,
    input  logic [31:0]           bt_b_operand_i,

    // Multiplier/Divider
    input  brq_pkg::md_op_e       multdiv_operator_i,
    input  logic                  mult_en_i,             // dynamic enable signal, for FSM control
    input  logic                  div_en_i,              // dynamic enable signal, for FSM control
    input  logic                  mult_sel_i,            // static decoder output, for data muxes
    input  logic                  div_sel_i,             // static decoder output, for data muxes
    input  logic  [1:0]           multdiv_signed_mode_i,
    input  logic [31:0]           multdiv_operand_a_i,
    input  logic [31:0]           multdiv_operand_b_i,
    input  logic                  multdiv_ready_id_i,
    input  logic                  data_ind_timing_i,

    // intermediate val reg
    output logic [1:0]            imd_val_we_o,
    output logic [33:0]           imd_val_d_o[2],
    input  logic [33:0]           imd_val_q_i[2],

    // Outputs
    output logic [31:0]           alu_adder_result_ex_o, // to LSU
    output logic [31:0]           result_ex_o,
    output logic [31:0]           branch_target_o,       // to IF
    output logic                  branch_decision_o,     // to ID

    output logic                  ex_valid_o             // EX has valid output
);

  import brq_pkg::*;

  logic [31:0] alu_result, multdiv_result;

  logic [32:0] multdiv_alu_operand_b, multdiv_alu_operand_a;
  logic [33:0] alu_adder_result_ext;
  logic        alu_cmp_result, alu_is_equal_result;
  logic        multdiv_valid;
  logic        multdiv_sel;
  logic [31:0] alu_imd_val_q[2];
  logic [31:0] alu_imd_val_d[2];
  logic [ 1:0] alu_imd_val_we;
  logic [33:0] multdiv_imd_val_d[2];
  logic [ 1:0] multdiv_imd_val_we;

  /*
    The multdiv_i output is never selected if RV32M=RV32MNone
    At synthesis time, all the combinational and sequential logic
    from the multdiv_i module are eliminated
  */
  if (RV32M != RV32MNone) begin : gen_multdiv_m
    assign multdiv_sel = mult_sel_i | div_sel_i;
  end else begin : gen_multdiv_no_m
    assign multdiv_sel = 1'b0;
  end

  // Intermediate Value Register Mux
  assign imd_val_d_o[0] = multdiv_sel ? multdiv_imd_val_d[0] : {2'b0, alu_imd_val_d[0]};
  assign imd_val_d_o[1] = multdiv_sel ? multdiv_imd_val_d[1] : {2'b0, alu_imd_val_d[1]};
  assign imd_val_we_o   = multdiv_sel ? multdiv_imd_val_we : alu_imd_val_we;

  assign alu_imd_val_q = '{imd_val_q_i[0][31:0], imd_val_q_i[1][31:0]};

  assign result_ex_o  = multdiv_sel ? multdiv_result : alu_result;

  // branch handling
  assign branch_decision_o  = alu_cmp_result;

  if (BranchTargetALU) begin : g_branch_target_alu
    logic [32:0] bt_alu_result;
    logic        unused_bt_carry;

    assign bt_alu_result   = bt_a_operand_i + bt_b_operand_i;

    assign unused_bt_carry = bt_alu_result[32];
    assign branch_target_o = bt_alu_result[31:0];
  end else begin : g_no_branch_target_alu
    // Unused bt_operand signals cause lint errors, this avoids them
    logic [31:0] unused_bt_a_operand, unused_bt_b_operand;

    assign unused_bt_a_operand = bt_a_operand_i;
    assign unused_bt_b_operand = bt_b_operand_i;

    assign branch_target_o = alu_adder_result_ex_o;
  end

  /////////
  // ALU //
  /////////

  brq_exu_alu #(
    .RV32B(RV32B)
  ) alu_i                  (
      .operator_i          ( alu_operator_i          ),
      .operand_a_i         ( alu_operand_a_i         ),
      .operand_b_i         ( alu_operand_b_i         ),
      .instr_first_cycle_i ( alu_instr_first_cycle_i ),
      .imd_val_q_i         ( alu_imd_val_q           ),
      .imd_val_we_o        ( alu_imd_val_we          ),
      .imd_val_d_o         ( alu_imd_val_d           ),
      .multdiv_operand_a_i ( multdiv_alu_operand_a   ),
      .multdiv_operand_b_i ( multdiv_alu_operand_b   ),
      .multdiv_sel_i       ( multdiv_sel             ),
      .adder_result_o      ( alu_adder_result_ex_o   ),
      .adder_result_ext_o  ( alu_adder_result_ext    ),
      .result_o            ( alu_result              ),
      .comparison_result_o ( alu_cmp_result          ),
      .is_equal_result_o   ( alu_is_equal_result     )
  );

  ////////////////
  // Multiplier //
  ////////////////

  if (RV32M == RV32MSlow) begin : gen_multdiv_slow
    brq_exu_multdiv_slow multdiv_i (
        .clk_i              ( clk_i                 ),
        .rst_ni             ( rst_ni                ),
        .mult_en_i          ( mult_en_i             ),
        .div_en_i           ( div_en_i              ),
        .mult_sel_i         ( mult_sel_i            ),
        .div_sel_i          ( div_sel_i             ),
        .operator_i         ( multdiv_operator_i    ),
        .signed_mode_i      ( multdiv_signed_mode_i ),
        .op_a_i             ( multdiv_operand_a_i   ),
        .op_b_i             ( multdiv_operand_b_i   ),
        .alu_adder_ext_i    ( alu_adder_result_ext  ),
        .alu_adder_i        ( alu_adder_result_ex_o ),
        .equal_to_zero_i    ( alu_is_equal_result   ),
        .data_ind_timing_i  ( data_ind_timing_i     ),
        .valid_o            ( multdiv_valid         ),
        .alu_operand_a_o    ( multdiv_alu_operand_a ),
        .alu_operand_b_o    ( multdiv_alu_operand_b ),
        .imd_val_q_i        ( imd_val_q_i           ),
        .imd_val_d_o        ( multdiv_imd_val_d     ),
        .imd_val_we_o       ( multdiv_imd_val_we    ),
        .multdiv_ready_id_i ( multdiv_ready_id_i    ),
        .multdiv_result_o   ( multdiv_result        )
    );
  end else if (RV32M == RV32MFast || RV32M == RV32MSingleCycle) begin : gen_multdiv_fast
    brq_exu_multdiv_fast #     (
        .RV32M ( RV32M )
    ) multdiv_i             (
        .clk_i              ( clk_i                 ),
        .rst_ni             ( rst_ni                ),
        .mult_en_i          ( mult_en_i             ),
        .div_en_i           ( div_en_i              ),
        .mult_sel_i         ( mult_sel_i            ),
        .div_sel_i          ( div_sel_i             ),
        .operator_i         ( multdiv_operator_i    ),
        .signed_mode_i      ( multdiv_signed_mode_i ),
        .op_a_i             ( multdiv_operand_a_i   ),
        .op_b_i             ( multdiv_operand_b_i   ),
        .alu_operand_a_o    ( multdiv_alu_operand_a ),
        .alu_operand_b_o    ( multdiv_alu_operand_b ),
        .alu_adder_ext_i    ( alu_adder_result_ext  ),
        .alu_adder_i        ( alu_adder_result_ex_o ),
        .equal_to_zero_i    ( alu_is_equal_result   ),
        .data_ind_timing_i  ( data_ind_timing_i     ),
        .imd_val_q_i        ( imd_val_q_i           ),
        .imd_val_d_o        ( multdiv_imd_val_d     ),
        .imd_val_we_o       ( multdiv_imd_val_we    ),
        .multdiv_ready_id_i ( multdiv_ready_id_i    ),
        .valid_o            ( multdiv_valid         ),
        .multdiv_result_o   ( multdiv_result        )
    );
  end

  // Multiplier/divider may require multiple cycles. The ALU output is valid in the same cycle
  // unless the intermediate result register is being written (which indicates this isn't the
  // final cycle of ALU operation).
  assign ex_valid_o = multdiv_sel ? multdiv_valid : ~(|alu_imd_val_we);

endmodule