module InPass4_frame_config (I0, I1, I2, I3, O0, O1, O2, O3, UserCLK, ConfigBits);
	parameter NoConfigBits = 4;
	// Pin0
	input I0; //EXTERNAL
	input I1; //EXTERNAL
	input I2; //EXTERNAL
	input I3; //EXTERNAL
	output O0; //EXTERNAL
	output O1; //EXTERNAL
	output O2; //EXTERNAL
	output O3; //EXTERNAL
	// Tile IO ports from BELs
	input UserCLK; //EXTERNAL -- SHARED_PORT -- ## the EXTERNAL keyword will send this signal all the way to top and the --SHARED Allows multiple BELs using the same port (e.g. for exporting a clock to the top)
	// GLOBAL all primitive pins that are connected to the switch matrix have to go before the GLOBAL label
	input [NoConfigBits - 1 : 0] ConfigBits;
	//_____   ______
	//    I----+--->|FLOP|-Q-|1 M |
	//         |             |  U |-------> O
	//         +-------------|0 X |               
	// I am instantiating an IOBUF primitive.
	// However, it is possible to connect corresponding pins all the way to top, just by adding an "-- EXTERNAL" comment (see PAD in the entity)
	reg Q0, Q1, Q2, Q3; // FLOPs
	
	always @ (posedge UserCLK)
	begin
		Q0 <= I0;
		Q1 <= I1;
		Q2 <= I2;
		Q3 <= I3;
	end
	// ConfigBits ( '0' combinatorial; '1' registered )
	//assign O0 = ConfigBits[0] ? Q0 : I0;
	//assign O1 = ConfigBits[1] ? Q1 : I1;
	//assign O2 = ConfigBits[2] ? Q2 : I2;
	//assign O3 = ConfigBits[3] ? Q3 : I3;

    my_mux2 my_mux2_inst0(
    .A0(I0),
    .A1(Q0),
    .S(ConfigBits[0]),
    .X(O0)
    );

    my_mux2 my_mux2_inst1(
    .A0(I1),
    .A1(Q1),
    .S(ConfigBits[1]),
    .X(O1)
    );

    my_mux2 my_mux2_inst2(
    .A0(I2),
    .A1(Q2),
    .S(ConfigBits[2]),
    .X(O2)
    );

    my_mux2 my_mux2_inst3(
    .A0(I3),
    .A1(Q3),
    .S(ConfigBits[3]),
    .X(O3)
    );	
endmodule