diff --git a/verilog/dv/la_test/la_test.c b/verilog/dv/la_test/la_test.c
index fc9d91b..16a8284 100644
--- a/verilog/dv/la_test/la_test.c
+++ b/verilog/dv/la_test/la_test.c
@@ -76,8 +76,8 @@
 } word_fields_t;
 
 union packet {
-  bit_fields_t bif;
-  word_fields_t byf;
+  bit_fields_t bf;
+  word_fields_t wf;
 };
 
 
@@ -99,42 +99,44 @@
 	reg_la2_data = 0x00000000;
 	reg_la3_data = 0x00000000;
 
-
-	union packet p;
-	p.bif.rst = 0;
-	reg_la0_data = p.byf.word0;
-	reg_la1_data = p.byf.word1;
-	reg_la2_data = p.byf.word2;
-	reg_la3_data = p.byf.word3;
-
-	p.bif.rst = 1;
-	reg_la0_data = p.byf.word0;
-	reg_la1_data = p.byf.word1;
-	reg_la2_data = p.byf.word2;
-	reg_la3_data = p.byf.word3;
-
-	p.bif.rst = 0;
-	reg_la0_data = p.byf.word0;
-	reg_la1_data = p.byf.word1;
-	reg_la2_data = p.byf.word2;
-	reg_la3_data = p.byf.word3;
-
-	p.bif.addr0 = 0x000000001;
-	p.bif.din0 = 0xDEADBEEF;
-	p.bif.csb0 = 0;
-	p.bif.web0 = 0;
-	p.bif.csb1 = 1;
-	p.bif.web1 = 1;
-	reg_la0_data = p.byf.word0;
-	reg_la1_data = p.byf.word1;
-	reg_la2_data = p.byf.word2;
-	reg_la3_data = p.byf.word3;
-
-
 	// On success, set pin 22 to 1
 	reg_mprj_datal = 0xFFFFFFFF;
 	/* Apply configuration */
 	reg_mprj_xfer = 1;
 	while (reg_mprj_xfer == 1);
 
+	union packet p;
+	p.bf.rst = 0;
+	// Only send the MSByte
+	reg_la3_data = p.wf.word3;
+
+	p.bf.rst = 1;
+	// Only send the MSByte
+	reg_la3_data = p.wf.word3;
+
+	p.bf.rst = 0;
+	// Only send the MSByte
+	reg_la3_data = p.wf.word3;
+
+	// This is how to read from the LA
+	// This will trigger a sample of the LA bits to read
+	reg_la_sample = 1;
+	// Now read them
+	p.wf.word0 = reg_la0_data;
+	p.wf.word1 = reg_la1_data;
+	p.wf.word2 = reg_la2_data;
+	p.wf.word3 = reg_la3_data;
+
+	/* p.bf.addr0 = 0x000000001; */
+	/* p.bf.din0 = 0xDEADBEEF; */
+	/* p.bf.csb0 = 0; */
+	/* p.bf.web0 = 0; */
+	/* p.bf.csb1 = 1; */
+	/* p.bf.web1 = 1; */
+	/* reg_la0_data = p.wf.word0; */
+	/* reg_la1_data = p.wf.word1; */
+	/* reg_la2_data = p.wf.word2; */
+	/* reg_la3_data = p.wf.word3; */
+
+
 }
diff --git a/verilog/dv/la_test/la_test_tb.v b/verilog/dv/la_test/la_test_tb.v
index a6351c1..4e1a6bd 100644
--- a/verilog/dv/la_test/la_test_tb.v
+++ b/verilog/dv/la_test/la_test_tb.v
@@ -63,14 +63,14 @@
 	assign mprj_io[21] = global_csb;
 
 	initial begin
-	   #170000;
+	   //#170000;
 
 	   $dumpfile("la_test.vcd");
 	   $dumpvars(0, la_test_tb);
 
-	   // Extend this if needed, but have a safety timeout
-	   #10000 $display("FAILED");
-	   $finish;
+	   // #200000 $display("TIMEOUT");
+	   // $finish;
+
 	end
 
 
@@ -79,11 +79,7 @@
 	    wait(mprj_io_22 == 8'h01);
 
 
-`ifdef GL
-	   $display("Monitor: Test 1 Mega-Project IO (GL) Passed");
-`else
-	   $display("Monitor: Test 1 Mega-Project IO (RTL) Passed");
-`endif
+	   $display("Saw bit 22");
 	    $finish;
 	end