| # SPDX-FileCopyrightText: 2021 , Dinesh Annayya |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # SPDX-License-Identifier: Apache-2.0 |
| # SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org> |
| |
| |
| set_units -time ns |
| set ::env(WB_CLOCK_PERIOD) "10" |
| set ::env(WB_CLOCK_PORT) "mclk" |
| |
| ###################################### |
| # WB Clock domain input output |
| ###################################### |
| create_clock [get_ports $::env(WB_CLOCK_PORT)] -name $::env(WB_CLOCK_PORT) -period $::env(WB_CLOCK_PERIOD) |
| set wb_input_delay_value [expr $::env(WB_CLOCK_PERIOD) * 0.6] |
| set wb_output_delay_value [expr $::env(WB_CLOCK_PERIOD) * 0.6] |
| puts "\[INFO\]: Setting wb output delay to:$wb_output_delay_value" |
| puts "\[INFO\]: Setting wb input delay to: $wb_input_delay_value" |
| |
| |
| set_input_delay 2.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] {reset_n} |
| |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port reg_cs*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port reg_wr*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port reg_addr*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port reg_wdata*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port reg_be*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port sdr_init_done*] |
| |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port device_idcode*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port reg_rdata*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port reg_ack*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port fuse_mhartid*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port irq_lines*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port soft_irq*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port user_irq*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_width*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_colbits*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_tras_d*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trp_d*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trcd_d*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_en*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_req_depth*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_mode_reg*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_cas*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trcar_d*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_twr_d*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_rfsh*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_cas*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trcar_d*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_twr_d*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_rfsh*] |
| |
| |
| # TODO set this as parameter |
| set_driving_cell -lib_cell $::env(SYNTH_DRIVING_CELL) -pin $::env(SYNTH_DRIVING_CELL_PIN) [all_inputs] |
| set cap_load [expr $::env(SYNTH_CAP_LOAD) / 1000.0] |
| puts "\[INFO\]: Setting load to: $cap_load" |
| set_load $cap_load [all_outputs] |
| |
| ## These are generated clock, only max delay added |
| set_false_path -to [get_port sdram_clk] |
| set_false_path -to [get_port cpu_clk] |
| set_false_path -to [get_port rtc_clk] |
| |
| #set_max_delay 2.0 [get_port sdram_clk] |
| #set_max_delay 2.0 [get_port cpu_clk] |
| #set_max_delay 2.0 [get_port rtc_clk] |