diff --git a/verilog/rtl/fpga250/wishbone_configuratorinator_00.v b/verilog/rtl/fpga250/wishbone_configuratorinator_00.v
new file mode 100644
index 0000000..e863324
--- /dev/null
+++ b/verilog/rtl/fpga250/wishbone_configuratorinator_00.v
@@ -0,0 +1,37 @@
+module wishbone_configuratorinator_00 (
+    // Global signals
+    input wb_clk_i,
+    input wb_rst_i,
+
+    // Wishbone signals
+    input wbs_stb_i,
+    input wbs_cyc_i,
+    input wbs_we_i,
+    // Write mask
+    input [3:0] wbs_sel_i,
+    input [31:0] wbs_data_i,
+    input [31:0] wbs_addr_i,
+    output wbs_ack_o, // Its bad form but its also 1 in the morning
+    output [31:0] wbs_data_o,
+
+    // Config output
+    output cen,
+    output [3:0] set_out,
+    output [3:0] shift_out
+);
+    wishbone_configuratorinator #(.BASE_ADDR(32'h3000_0000)) configy (
+        .wb_clk_i(wb_clk_i),
+        .wb_rst_i(wb_rst_i),
+        .wbs_stb_i(wbs_stb_i),
+        .wbs_cyc_i(wbs_cyc_i),
+        .wbs_we_i(wbs_we_i),
+        .wbs_sel_i(wbs_sel_i),
+        .wbs_data_i(wbs_data_i),
+        .wbs_addr_i(wbs_addr_i),
+        .wbs_ack_o(wbs_ack_o),
+        .wbs_data_o(wbs_data_o),
+        .cen(cen),
+        .set_out(set_out),
+        .shift_out(shift_out)
+    );
+endmodule
\ No newline at end of file
diff --git a/verilog/rtl/fpga250/wishbone_configuratorinator_10.v b/verilog/rtl/fpga250/wishbone_configuratorinator_10.v
new file mode 100644
index 0000000..6c3415c
--- /dev/null
+++ b/verilog/rtl/fpga250/wishbone_configuratorinator_10.v
@@ -0,0 +1,37 @@
+module wishbone_configuratorinator_10 (
+    // Global signals
+    input wb_clk_i,
+    input wb_rst_i,
+
+    // Wishbone signals
+    input wbs_stb_i,
+    input wbs_cyc_i,
+    input wbs_we_i,
+    // Write mask
+    input [3:0] wbs_sel_i,
+    input [31:0] wbs_data_i,
+    input [31:0] wbs_addr_i,
+    output wbs_ack_o, // Its bad form but its also 1 in the morning
+    output [31:0] wbs_data_o,
+
+    // Config output
+    output cen,
+    output [3:0] set_out,
+    output [3:0] shift_out
+);
+    wishbone_configuratorinator #(.BASE_ADDR(32'h3000_0010)) configy (
+        .wb_clk_i(wb_clk_i),
+        .wb_rst_i(wb_rst_i),
+        .wbs_stb_i(wbs_stb_i),
+        .wbs_cyc_i(wbs_cyc_i),
+        .wbs_we_i(wbs_we_i),
+        .wbs_sel_i(wbs_sel_i),
+        .wbs_data_i(wbs_data_i),
+        .wbs_addr_i(wbs_addr_i),
+        .wbs_ack_o(wbs_ack_o),
+        .wbs_data_o(wbs_data_o),
+        .cen(cen),
+        .set_out(set_out),
+        .shift_out(shift_out)
+    );
+endmodule
\ No newline at end of file