#!/usr/bin/env python3
# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0

#
# check_density.py ---
#
#    Run density checks on the final (filled) GDS.
#

import sys
import os
import re
import select
import subprocess

def usage():
    print("Usage:")
    print("check_density.py [<path_to_project>] [-keep]")
    print("")
    print("where:")
    print("   <path_to_project> is the path to the project top level directory.")
    print("")
    print("  If <path_to_project> is not given, then it is assumed to be the cwd.")
    print("  If '-keep' is specified, then keep the check script.")
    return 0


if __name__ == '__main__':

    optionlist = []
    arguments = []

    debugmode = False
    keepmode = False

    for option in sys.argv[1:]:
        if option.find('-', 0) == 0:
            optionlist.append(option)
        else:
            arguments.append(option)

    if len(arguments) > 1:
        print("Wrong number of arguments given to check_density.py.")
        usage()
        sys.exit(0)

    if len(arguments) == 1:
        user_project_path = arguments[0]
    else:
        user_project_path = os.getcwd()

    # Check for valid user path

    if not os.path.isdir(user_project_path):
        print('Error:  Project path "' + user_project_path + '" does not exist or is not readable.')
        sys.exit(1)

    # Check for valid user ID
    user_id_value = None
    if os.path.isfile(user_project_path + '/info.yaml'):
        with open(user_project_path + '/info.yaml', 'r') as ifile:
            infolines = ifile.read().splitlines()
            for line in infolines:
                kvpair = line.split(':')
                if len(kvpair) == 2:
                    key = kvpair[0].strip()
                    value = kvpair[1].strip()
                    if key == 'project_id':
                        user_id_value = value.strip('"\'')
                        break

    if user_id_value:
        project = 'caravel'
        project_with_id = 'caravel_' + user_id_value
    else:
        print('Error:  No project_id found in info.yaml file.')
        sys.exit(1)

    if '-debug' in optionlist:
        debugmode = True
    if '-keep' in optionlist:
        keepmode = True

    magpath = user_project_path + '/mag'
    rcfile = magpath + '/.magicrc'

    with open(magpath + '/check_density.tcl', 'w') as ofile:
        print('#!/bin/env wish', file=ofile)
        print('crashbackups stop', file=ofile)
        print('drc off', file=ofile)
        print('snap internal', file=ofile)

        print('set starttime [orig_clock format [orig_clock seconds] -format "%D %T"]', file=ofile)
        print('puts stdout "Started reading GDS: $starttime"', file=ofile)
        print('', file=ofile)
        print('flush stdout', file=ofile)
        print('update idletasks', file=ofile)

        # Read final project from .gds
        print('gds readonly true', file=ofile)
        print('gds rescale false', file=ofile)
        print('gds read ../gds/' + project_with_id + '.gds', file=ofile)
        print('', file=ofile)

        print('set midtime [orig_clock format [orig_clock seconds] -format "%D %T"]', file=ofile)
        print('puts stdout "Starting density checks: $midtime"', file=ofile)
        print('', file=ofile)
        print('flush stdout', file=ofile)
        print('update idletasks', file=ofile)

        # Get step box dimensions (700um for size and 70um for step)
        print('box values 0 0 0 0', file=ofile)
        # print('box size 700um 700um', file=ofile)
        # print('set stepbox [box values]', file=ofile)
        # print('set stepwidth [lindex $stepbox 2]', file=ofile)
        # print('set stepheight [lindex $stepbox 3]', file=ofile)

        print('box size 70um 70um', file=ofile)
        print('set stepbox [box values]', file=ofile)
        print('set stepsizex [lindex $stepbox 2]', file=ofile)
        print('set stepsizey [lindex $stepbox 3]', file=ofile)

        print('select top cell', file=ofile)
        print('expand', file=ofile)
        print('set fullbox [box values]', file=ofile)
        print('set xmax [lindex $fullbox 2]', file=ofile)
        print('set xmin [lindex $fullbox 0]', file=ofile)
        print('set fullwidth [expr {$xmax - $xmin}]', file=ofile)
        print('set xtiles [expr {int(ceil(($fullwidth + 0.0) / $stepsizex))}]', file=ofile)
        print('set ymax [lindex $fullbox 3]', file=ofile)
        print('set ymin [lindex $fullbox 1]', file=ofile)
        print('set fullheight [expr {$ymax - $ymin}]', file=ofile)
        print('set ytiles [expr {int(ceil(($fullheight + 0.0) / $stepsizey))}]', file=ofile)
        print('box size $stepsizex $stepsizey', file=ofile)
        print('set xbase [lindex $fullbox 0]', file=ofile)
        print('set ybase [lindex $fullbox 1]', file=ofile)
        print('', file=ofile)

        print('puts stdout "XTILES: $xtiles"', file=ofile)
        print('puts stdout "YTILES: $ytiles"', file=ofile)
        print('', file=ofile)

        # Need to know what fraction of a full tile is the last row and column
        print('set xfrac [expr {($xtiles * $stepsizex - $fullwidth + 0.0) / $stepsizex}]', file=ofile)
        print('set yfrac [expr {($ytiles * $stepsizey - $fullheight + 0.0) / $stepsizey}]', file=ofile)
        print('puts stdout "XFRAC: $xfrac"', file=ofile)
        print('puts stdout "YFRAC: $yfrac"', file=ofile)

        print('cif ostyle density', file=ofile)

        # Process density at steps.  For efficiency, this is done in 70x70 um
        # areas, dumped to a file, and then aggregated into the 700x700 areas.

        print('for {set y 0} {$y < $ytiles} {incr y} {', file=ofile)
        print('    for {set x 0} {$x < $xtiles} {incr x} {', file=ofile)
        print('        set xlo [expr $xbase + $x * $stepsizex]', file=ofile)
        print('        set ylo [expr $ybase + $y * $stepsizey]', file=ofile)
        print('        set xhi [expr $xlo + $stepsizex]', file=ofile)
        print('        set yhi [expr $ylo + $stepsizey]', file=ofile)
        print('        box values $xlo $ylo $xhi $yhi', file=ofile)

        # Flatten this area
        print('        flatten -dobbox -nolabels tile', file=ofile)
        print('        load tile', file=ofile)
        print('        select top cell', file=ofile)

        # Run density check for each layer
        print('        puts stdout "Density results for tile x=$x y=$y"', file=ofile)

        print('        set fdens  [cif list cover fom_all]', file=ofile)
        print('        set pdens  [cif list cover poly_all]', file=ofile)
        print('        set ldens  [cif list cover li_all]', file=ofile)
        print('        set m1dens [cif list cover m1_all]', file=ofile)
        print('        set m2dens [cif list cover m2_all]', file=ofile)
        print('        set m3dens [cif list cover m3_all]', file=ofile)
        print('        set m4dens [cif list cover m4_all]', file=ofile)
        print('        set m5dens [cif list cover m5_all]', file=ofile)
        print('        puts stdout "FOM: $fdens"', file=ofile)
        print('        puts stdout "POLY: $pdens"', file=ofile)
        print('        puts stdout "LI1: $ldens"', file=ofile)
        print('        puts stdout "MET1: $m1dens"', file=ofile)
        print('        puts stdout "MET2: $m2dens"', file=ofile)
        print('        puts stdout "MET3: $m3dens"', file=ofile)
        print('        puts stdout "MET4: $m4dens"', file=ofile)
        print('        puts stdout "MET5: $m5dens"', file=ofile)
        print('        flush stdout', file=ofile)
        print('        update idletasks', file=ofile)

        print('        load ' + project_with_id, file=ofile)
        print('        cellname delete tile', file=ofile)

        print('    }', file=ofile)
        print('}', file=ofile)

        print('set endtime [orig_clock format [orig_clock seconds] -format "%D %T"]', file=ofile)
        print('puts stdout "Ended: $endtime"', file=ofile)
        print('', file=ofile)


    myenv = os.environ.copy()
    # Real views are necessary for the DRC checks
    myenv['MAGTYPE'] = 'mag'

    print('Running density checks on file ' + project_with_id + '.gds', flush=True)

    mproc = subprocess.Popen(['magic', '-dnull', '-noconsole',
		'-rcfile', rcfile, magpath + '/check_density.tcl'],
		stdin = subprocess.DEVNULL,
		stdout = subprocess.PIPE,
		stderr = subprocess.PIPE,
		cwd = magpath,
		env = myenv,
		universal_newlines = True)

    # Use signal to poll the process and generate any output as it arrives

    fomfill  = []
    polyfill = []
    lifill   = []
    met1fill = []
    met2fill = []
    met3fill = []
    met4fill = []
    met5fill = []
    xtiles = 0
    ytiles = 0
    xfrac = 0.0
    yfrac = 0.0

    while mproc:
        status = mproc.poll()
        if status != None:
            try:
                output = mproc.communicate(timeout=1)
            except ValueError:
                print('Magic forced stop, status ' + str(status))
                sys.exit(1)
            else:
                outlines = output[0]
                errlines = output[1]
                for line in outlines.splitlines():
                    print(line)
                    dpair = line.split(':')
                    if len(dpair) == 2:
                        layer = dpair[0]
                        try:
                            density = float(dpair[1].strip())
                        except:
                            continue
                        if layer == 'FOM':
                            fomfill.append(density)
                        elif layer == 'POLY':
                            polyfill.append(density)
                        elif layer == 'LI1':
                            lifill.append(density)
                        elif layer == 'MET1':
                            met1fill.append(density)
                        elif layer == 'MET2':
                            met2fill.append(density)
                        elif layer == 'MET3':
                            met3fill.append(density)
                        elif layer == 'MET4':
                            met4fill.append(density)
                        elif layer == 'MET5':
                            met5fill.append(density)
                        elif layer == 'XTILES':
                            xtiles = int(dpair[1].strip())
                        elif layer == 'YTILES':
                            ytiles = int(dpair[1].strip())
                        elif layer == 'XFRAC':
                            xfrac = float(dpair[1].strip())
                        elif layer == 'YFRAC':
                            yfrac = float(dpair[1].strip())

                for line in errlines.splitlines():
                    print(line)
                print('Magic exited with status ' + str(status))
                if int(status) != 0:
                    sys.exit(int(status))
                else:
                    break
        else:
            n = 0
            while True:
                n += 1
                if n > 100:
                    n = 0
                    status = mproc.poll()
                    if status != None:
                        break
                sresult = select.select([mproc.stdout, mproc.stderr], [], [], 0)[0]
                if mproc.stdout in sresult:
                    outstring = mproc.stdout.readline().strip()
                    print(outstring)
                elif mproc.stderr in sresult:
                    outstring = mproc.stderr.readline().strip()
                    print(outstring)
                else:
                    break

    total_tiles = (ytiles - 9) * (xtiles - 9)

    print('')
    print('Density results (total tiles = ' + str(total_tiles) + '):')

    # Full areas are 10 x 10 tiles = 100.  But the right and top sides are
    # not full tiles, so the full area must be prorated.

    sideadjust = 90.0 + (10.0 * xfrac)
    topadjust = 90.0 + (10.0 * yfrac)
    corneradjust = 81.0 + (9.0 * xfrac) + (9.0 * yfrac) + (xfrac * yfrac)

    print('')
    print('FOM Density:')
    for y in range(0, ytiles - 9):
        if y == ytiles - 10:
            atotal = topadjust
        else:
            atotal = 100.0
        for x in range(0, xtiles - 9):
            if x == xtiles - 10:
                if y == ytiles - 10:
                    atotal = corneradjust
                else:
                    atotal = sideadjust
            fomaccum = 0
            for w in range(y, y + 10):
                base = xtiles * w + x
                fomaccum += sum(fomfill[base : base + 10])
                    
            print('Tile (' + str(x) + ', ' + str(y) + '):   ' + str(fomaccum / atotal))
            if fomaccum < 33.0:
                print('***Error:  FOM Density < 33%')
            elif fomaccum > 57.0:
                print('***Error:  FOM Density > 57%')

    print('')
    print('POLY Density:')
    for y in range(0, ytiles - 9):
        if y == ytiles - 10:
            atotal = topadjust
        else:
            atotal = 100.0
        for x in range(0, xtiles - 9):
            if x == xtiles - 10:
                if y == ytiles - 10:
                    atotal = corneradjust
                else:
                    atotal = sideadjust
            polyaccum = 0
            for w in range(y, y + 10):
                base = xtiles * w + x
                polyaccum += sum(polyfill[base : base + 10])
                    
            print('Tile (' + str(x) + ', ' + str(y) + '):   ' + str(polyaccum / atotal))

    print('')
    print('LI Density:')
    for y in range(0, ytiles - 9):
        if y == ytiles - 10:
            atotal = topadjust
        else:
            atotal = 100.0
        for x in range(0, xtiles - 9):
            if x == xtiles - 10:
                if y == ytiles - 10:
                    atotal = corneradjust
                else:
                    atotal = sideadjust
            liaccum = 0
            for w in range(y, y + 10):
                base = xtiles * w + x
                liaccum += sum(lifill[base : base + 10])
                    
            print('Tile (' + str(x) + ', ' + str(y) + '):   ' + str(liaccum / atotal))
            if liaccum < 35.0:
                print('***Error:  LI Density < 35%')
            elif liaccum > 70.0:
                print('***Error:  LI Density > 70%')

    print('')
    print('MET1 Density:')
    for y in range(0, ytiles - 9):
        if y == ytiles - 10:
            atotal = topadjust
        else:
            atotal = 100.0
        for x in range(0, xtiles - 9):
            if x == xtiles - 10:
                if y == ytiles - 10:
                    atotal = corneradjust
                else:
                    atotal = sideadjust
            met1accum = 0
            for w in range(y, y + 10):
                base = xtiles * w + x
                met1accum += sum(met1fill[base : base + 10])
                    
            print('Tile (' + str(x) + ', ' + str(y) + '):   ' + str(met1accum / atotal))
            if met1accum < 35.0:
                print('***Error:  MET1 Density < 35%')
            elif met1accum > 70.0:
                print('***Error:  MET1 Density > 70%')

    print('')
    print('MET2 Density:')
    for y in range(0, ytiles - 9):
        if y == ytiles - 10:
            atotal = topadjust
        else:
            atotal = 100.0
        for x in range(0, xtiles - 9):
            if x == xtiles - 10:
                if y == ytiles - 10:
                    atotal = corneradjust
                else:
                    atotal = sideadjust
            met2accum = 0
            for w in range(y, y + 10):
                base = xtiles * w + x
                met2accum += sum(met2fill[base : base + 10])
                    
            print('Tile (' + str(x) + ', ' + str(y) + '):   ' + str(met2accum / atotal))
            if met2accum < 35.0:
                print('***Error:  MET2 Density < 35%')
            elif met2accum > 70.0:
                print('***Error:  MET2 Density > 70%')

    print('')
    print('MET3 Density:')
    for y in range(0, ytiles - 9):
        if y == ytiles - 10:
            atotal = topadjust
        else:
            atotal = 100.0
        for x in range(0, xtiles - 9):
            if x == xtiles - 10:
                if y == ytiles - 10:
                    atotal = corneradjust
                else:
                    atotal = sideadjust
            met3accum = 0
            for w in range(y, y + 10):
                base = xtiles * w + x
                met3accum += sum(met3fill[base : base + 10])
                    
            print('Tile (' + str(x) + ', ' + str(y) + '):   ' + str(met3accum / atotal))
            if met3accum < 35.0:
                print('***Error:  MET3 Density < 35%')
            elif met3accum > 70.0:
                print('***Error:  MET3 Density > 70%')

    print('')
    print('MET4 Density:')
    for y in range(0, ytiles - 9):
        if y == ytiles - 10:
            atotal = topadjust
        else:
            atotal = 100.0
        for x in range(0, xtiles - 9):
            if x == xtiles - 10:
                if y == ytiles - 10:
                    atotal = corneradjust
                else:
                    atotal = sideadjust
            met4accum = 0
            for w in range(y, y + 10):
                base = xtiles * w + x
                met4accum += sum(met4fill[base : base + 10])
                    
            print('Tile (' + str(x) + ', ' + str(y) + '):   ' + str(met4accum / atotal))
            if met4accum < 35.0:
                print('***Error:  MET4 Density < 35%')
            elif met4accum > 70.0:
                print('***Error:  MET4 Density > 70%')

    print('')
    print('MET5 Density:')
    for y in range(0, ytiles - 9):
        if y == ytiles - 10:
            atotal = topadjust
        else:
            atotal = 100.0
        for x in range(0, xtiles - 9):
            if x == xtiles - 10:
                if y == ytiles - 10:
                    atotal = corneradjust
                else:
                    atotal = sideadjust
            met5accum = 0
            for w in range(y, y + 10):
                base = xtiles * w + x
                met5accum += sum(met5fill[base : base + 10])
                    
            print('Tile (' + str(x) + ', ' + str(y) + '):   ' + str(met5accum / atotal))
            if met5accum < 45.0:
                print('***Error:  MET5 Density < 45%')
            elif met5accum > 86.0:
                print('***Error:  MET5 Density > 80%')

    if not keepmode:
        os.remove(magpath + '/check_density.tcl')

    print('')
    print('Done!')
    sys.exit(0)