diff --git a/verilog/dv/caravel/defs.h b/verilog/dv/caravel/defs.h
index abfcd44..20a426c 100644
--- a/verilog/dv/caravel/defs.h
+++ b/verilog/dv/caravel/defs.h
@@ -12,6 +12,9 @@
 extern uint32_t flashio_worker_begin;
 extern uint32_t flashio_worker_end;
 
+// SYNTH_MEM (0x0100_0000)
+#define reg_synth_mem (*(volatile uint32_t*)0x01000000)
+
 // UART (0x2000_0000)
 #define reg_uart_clkdiv (*(volatile uint32_t*)0x20000000)
 #define reg_uart_data   (*(volatile uint32_t*)0x20000004)
diff --git a/verilog/dv/caravel/sections.lds b/verilog/dv/caravel/sections.lds
index 8482887..0e80064 100644
--- a/verilog/dv/caravel/sections.lds
+++ b/verilog/dv/caravel/sections.lds
@@ -1,6 +1,6 @@
 MEMORY {
 	FLASH (rx)	: ORIGIN = 0x10000000, LENGTH = 0x400000 	/* 4MB */
-	RAM(xrw)	: ORIGIN = 0x00000000, LENGTH = 0x8000		/* 8192 words ( 32 KB) */ 
+	RAM(xrw)	: ORIGIN = 0x00000000, LENGTH = 0x1400		/* 1280 words (5 KB) */ 
 }
 
 SECTIONS {
diff --git a/verilog/rtl/caravel.v b/verilog/rtl/caravel.v
index fffee90..a9caf12 100644
--- a/verilog/rtl/caravel.v
+++ b/verilog/rtl/caravel.v
@@ -51,7 +51,7 @@
 `include "user_proj_example.v"
 
 `ifdef USE_OPENRAM
-    `include "sram_1rw1r_32_8192_8_sky130.v"
+    `include "sram_1rw1r_32_256_8_sky130.v"
 `endif
 
 module caravel (
@@ -251,17 +251,17 @@
 	.mprj_io_in(mprj_io_in),
 	.mprj_io_out(mprj_io_out),
 	.mprj_io_oeb(mprj_io_oeb),
-        .mprj_io_hldh_n(mprj_io_hldh_n),
+	.mprj_io_hldh_n(mprj_io_hldh_n),
 	.mprj_io_enh(mprj_io_enh),
-        .mprj_io_inp_dis(mprj_io_inp_dis),
-        .mprj_io_ib_mode_sel(mprj_io_ib_mode_sel),
-        .mprj_io_vtrip_sel(mprj_io_vtrip_sel),
-        .mprj_io_slow_sel(mprj_io_slow_sel),
-        .mprj_io_holdover(mprj_io_holdover),
-        .mprj_io_analog_en(mprj_io_analog_en),
-        .mprj_io_analog_sel(mprj_io_analog_sel),
-        .mprj_io_analog_pol(mprj_io_analog_pol),
-        .mprj_io_dm(mprj_io_dm)
+	.mprj_io_inp_dis(mprj_io_inp_dis),
+	.mprj_io_ib_mode_sel(mprj_io_ib_mode_sel),
+	.mprj_io_vtrip_sel(mprj_io_vtrip_sel),
+	.mprj_io_slow_sel(mprj_io_slow_sel),
+	.mprj_io_holdover(mprj_io_holdover),
+	.mprj_io_analog_en(mprj_io_analog_en),
+	.mprj_io_analog_sel(mprj_io_analog_sel),
+	.mprj_io_analog_pol(mprj_io_analog_pol),
+	.mprj_io_dm(mprj_io_dm)
     );
 
     // SoC core
@@ -301,6 +301,20 @@
     // Mask revision
     wire [31:0] mask_rev;
 
+	wire 	    mprj_clock;
+	wire 	    mprj_clock2;
+	wire 	    mprj_resetn;
+	wire 	    mprj_cyc_o_user;
+	wire 	    mprj_stb_o_user;
+	wire 	    mprj_we_o_user;
+	wire [3:0]  mprj_sel_o_user;
+	wire [31:0] mprj_adr_o_user;
+	wire [31:0] mprj_dat_o_user;
+	wire	    mprj_vcc_pwrgood;
+	wire	    mprj2_vcc_pwrgood;
+	wire	    mprj_vdd_pwrgood;
+	wire	    mprj2_vdd_pwrgood;
+
     mgmt_core #(
 	.MPRJ_IO_PADS(`MPRJ_IO_PADS),
 	.MPRJ_PWR_PADS(`MPRJ_PWR_PADS)
@@ -375,20 +389,6 @@
 	/* always active, connect the enable to the logic-1 output from	*/
 	/* the vccd1 domain.						*/
 
-	wire 	    mprj_clock;
-	wire 	    mprj_clock2;
-	wire 	    mprj_resetn;
-	wire 	    mprj_cyc_o_user;
-	wire 	    mprj_stb_o_user;
-	wire 	    mprj_we_o_user;
-	wire [3:0]  mprj_sel_o_user;
-	wire [31:0] mprj_adr_o_user;
-	wire [31:0] mprj_dat_o_user;
-	wire	    mprj_vcc_pwrgood;
-	wire	    mprj2_vcc_pwrgood;
-	wire	    mprj_vdd_pwrgood;
-	wire	    mprj2_vdd_pwrgood;
-
 	mgmt_protect mgmt_buffers (
 		.vccd(vccd),
 		.vssd(vssd),
diff --git a/verilog/rtl/mem_synth_wb.v b/verilog/rtl/mem_synth_wb.v
new file mode 100644
index 0000000..d54ddf6
--- /dev/null
+++ b/verilog/rtl/mem_synth_wb.v
@@ -0,0 +1,77 @@
+module mem_synth_wb #(
+   parameter integer MEM_WORDS = 1024
+)( 
+    input wb_clk_i,
+    input wb_rst_i,
+
+    input [31:0] wb_adr_i,
+    input [31:0] wb_dat_i,
+    input [3:0] wb_sel_i,
+    input wb_we_i,
+    input wb_cyc_i,
+    input wb_stb_i,
+
+    output wb_ack_o,
+    output [31:0] wb_dat_o
+);
+
+    wire valid;
+    wire ram_wen;
+    wire [3:0] wen; // write enable
+
+    assign valid = wb_cyc_i & wb_stb_i;
+    assign ram_wen = wb_we_i && valid;
+
+    assign wen = wb_sel_i & {4{ram_wen}} ;
+
+    reg wb_ack_read;
+    reg wb_ack_o;
+
+    always @(posedge wb_clk_i) begin
+        if (wb_rst_i == 1'b 1) begin
+            wb_ack_read <= 1'b0;
+            wb_ack_o <= 1'b0;
+        end else begin
+            wb_ack_o    <= wb_we_i? (valid & !wb_ack_o): wb_ack_read;
+            wb_ack_read <= (valid & !wb_ack_o) & !wb_ack_read;
+        end
+    end
+
+    soc_mem_synth # (
+        .MEM_WORDS(MEM_WORDS)
+    ) mem (
+        .clk(wb_clk_i),
+        .ena(valid),
+        .wen(wen),
+        .addr(wb_adr_i[12:2]),
+        .wdata(wb_dat_i),
+        .rdata(wb_dat_o)
+    );
+
+endmodule
+
+module soc_mem_synth #(
+    parameter integer MEM_WORDS = 2048
+)(
+    input clk,
+    input ena,
+    input [3:0] wen,
+    input [10:0] addr,
+    input [31:0] wdata,
+    output[31:0] rdata
+);
+
+    reg [31:0] rdata;
+    reg [31:0] mem [0:MEM_WORDS-1];
+
+    always @(posedge clk) begin
+        if (ena == 1'b1) begin
+            rdata <= mem[addr];
+            if (wen[0]) mem[addr][ 7: 0] <= wdata[ 7: 0];
+            if (wen[1]) mem[addr][15: 8] <= wdata[15: 8];
+            if (wen[2]) mem[addr][23:16] <= wdata[23:16];
+            if (wen[3]) mem[addr][31:24] <= wdata[31:24];
+        end
+    end
+
+endmodule
\ No newline at end of file
diff --git a/verilog/rtl/mem_wb.v b/verilog/rtl/mem_wb.v
index bacf52c..882f1c7 100644
--- a/verilog/rtl/mem_wb.v
+++ b/verilog/rtl/mem_wb.v
@@ -93,12 +93,12 @@
     
     /* Using Port 0 Only - Size: 1KB, 256x32 bits */
     //sram_1rw1r_32_256_8_scn4m_subm 
-    sram_1rw1r_32_8192_8_sky130 SRAM(
+    sram_1rw1r_32_256_8_sky130 SRAM(
             .clk0(clk), 
             .csb0(~ena), 
             .web0(~|wen),
             .wmask0(wen),
-            .addr0(addr[12:0]),
+            .addr0(addr[7:0]),
             .din0(wdata),
             .dout0(rdata)
       );
diff --git a/verilog/rtl/mgmt_soc.v b/verilog/rtl/mgmt_soc.v
index ac4fdf5..3a8825e 100644
--- a/verilog/rtl/mgmt_soc.v
+++ b/verilog/rtl/mgmt_soc.v
@@ -41,6 +41,7 @@
 `include "la_wb.v"
 `include "mprj_ctrl.v"
 `include "convert_gpio_sigs.v"
+`include "mem_synth_wb.v"
 
 module mgmt_soc #(
     parameter MPRJ_IO_PADS = 32,
@@ -138,13 +139,15 @@
     output [31:0] mprj_dat_o
 );
     /* Memory reverted back to 256 words while memory has to be synthesized */
-    parameter integer MEM_WORDS = 8192;
-    parameter [31:0] STACKADDR = (4*MEM_WORDS);       // end of memory
+    parameter integer MEM_WORDS = 256;
+    parameter integer MEM_SYNTH_WORDS = 1024;
+    parameter [31:0] STACKADDR = (4*(MEM_WORDS + MEM_SYNTH_WORDS));       // end of memory
     parameter [31:0] PROGADDR_RESET = 32'h 1000_0000; 
     parameter [31:0] PROGADDR_IRQ   = 32'h 0000_0000;
 
     // Slaves Base Addresses
     parameter RAM_BASE_ADR    = 32'h 0000_0000;
+    parameter RAM_SYNTH_BASE_ADR = 32'h 0100_0000;
     parameter FLASH_BASE_ADR  = 32'h 1000_0000;
     parameter UART_BASE_ADR   = 32'h 2000_0000;
     parameter GPIO_BASE_ADR   = 32'h 2100_0000;
@@ -200,7 +203,7 @@
     // Wishbone Interconnect 
     localparam ADR_WIDTH = 32;
     localparam DAT_WIDTH = 32;
-    localparam NUM_SLAVES = 12;
+    localparam NUM_SLAVES = 13;
 
     parameter [NUM_SLAVES*ADR_WIDTH-1: 0] ADR_MASK = {
         {8'hFF, {ADR_WIDTH-8{1'b0}}},
@@ -214,6 +217,7 @@
         {8'hFF, {ADR_WIDTH-8{1'b0}}},
         {8'hFF, {ADR_WIDTH-8{1'b0}}},
         {8'hFF, {ADR_WIDTH-8{1'b0}}},
+        {8'hFF, {ADR_WIDTH-8{1'b0}}},
         {8'hFF, {ADR_WIDTH-8{1'b0}}}
     };
 
@@ -229,6 +233,7 @@
         {GPIO_BASE_ADR},
         {UART_BASE_ADR},
         {FLASH_BASE_ADR},
+        {RAM_SYNTH_BASE_ADR},
         {RAM_BASE_ADR}
     };
 
@@ -701,6 +706,26 @@
         .wb_dat_o(mem_dat_o)
     );
 
+    // Wishbone Slave Synthesized RAM
+    wire mem_synth_stb_i;
+    wire mem_synth_ack_o;
+    wire [31:0] mem_synth_dat_o;
+
+    mem_synth_wb #(
+        .MEM_WORDS(MEM_SYNTH_WORDS)
+    ) soc_mem_synth (
+        .wb_clk_i(wb_clk_i),
+        .wb_rst_i(wb_rst_i),
+        .wb_adr_i(cpu_adr_o), 
+        .wb_dat_i(cpu_dat_o),
+        .wb_sel_i(cpu_sel_o),
+        .wb_we_i(cpu_we_o),
+        .wb_cyc_i(cpu_cyc_o),
+        .wb_stb_i(mem_synth_stb_i),
+        .wb_ack_o(mem_synth_ack_o), 
+        .wb_dat_o(mem_synth_dat_o)
+    );
+
     // Wishbone intercon logic
     wb_intercon #(
         .AW(ADR_WIDTH),
@@ -720,17 +745,17 @@
 		mprj_stb_o, mprj_ctrl_stb_i, la_stb_i, 
 		spi_master_stb_i, counter_timer1_stb_i, counter_timer0_stb_i,
 		gpio_stb_i, uart_stb_i,
-		spimemio_flash_stb_i, mem_stb_i }), 
+		spimemio_flash_stb_i, mem_synth_stb_i, mem_stb_i }), 
         .wbs_dat_i({ sys_dat_o, spimemio_cfg_dat_o,
 		mprj_dat_i, mprj_ctrl_dat_o, la_dat_o,
 		spi_master_dat_o, counter_timer1_dat_o, counter_timer0_dat_o,
 		gpio_dat_o, uart_dat_o,
-		spimemio_flash_dat_o, mem_dat_o }),
+		spimemio_flash_dat_o,mem_synth_dat_o, mem_dat_o }),
         .wbs_ack_i({ sys_ack_o, spimemio_cfg_ack_o,
 		mprj_ack_i, mprj_ctrl_ack_o, la_ack_o,
 		spi_master_ack_o, counter_timer1_ack_o, counter_timer0_ack_o,
 		gpio_ack_o, uart_ack_o,
-		spimemio_flash_ack_o, mem_ack_o })
+		spimemio_flash_ack_o, mem_synth_ack_o,  mem_ack_o })
     );
 
 endmodule
diff --git a/verilog/rtl/sram_1rw1r_32_8192_8_sky130.v b/verilog/rtl/sram_1rw1r_32_256_8_sky130.v
similarity index 93%
rename from verilog/rtl/sram_1rw1r_32_8192_8_sky130.v
rename to verilog/rtl/sram_1rw1r_32_256_8_sky130.v
index dfd9a45..72864b1 100644
--- a/verilog/rtl/sram_1rw1r_32_8192_8_sky130.v
+++ b/verilog/rtl/sram_1rw1r_32_256_8_sky130.v
@@ -1,9 +1,13 @@
 // OpenRAM SRAM model
-// Words: 8192
+// Words: 256
 // Word size: 32
 // Write size: 8
 
-module sram_1rw1r_32_8192_8_sky130(
+module sram_1rw1r_32_256_8_sky130(
+`ifdef LVS
+	vdd,
+	gnd,
+`endif
 // Port 0: RW
     clk0,csb0,web0,wmask0,addr0,din0,dout0,
 // Port 1: R
@@ -12,11 +16,15 @@
 
   parameter NUM_WMASKS = 4 ;
   parameter DATA_WIDTH = 32 ;
-  parameter ADDR_WIDTH = 13 ;
+  parameter ADDR_WIDTH = 8 ;
   parameter RAM_DEPTH = 1 << ADDR_WIDTH;
   // FIXME: This delay is arbitrary.
-  parameter DELAY = 1 ;
+  parameter DELAY = 3 ;
 
+`ifdef LVS
+  inout vdd;
+  inout gnd;
+`endif
   input  clk0; // clock
   input   csb0; // active low chip select
   input  web0; // active low write control