diff --git a/openlane/DFFRAM/README.md b/openlane/DFFRAM/README.md
new file mode 100644
index 0000000..639fc5a
--- /dev/null
+++ b/openlane/DFFRAM/README.md
@@ -0,0 +1,3 @@
+# DFFRAM
+
+This DFFRAM is adobted from https://github.com/shalan/DFFRAM
diff --git a/openlane/README.md b/openlane/README.md
new file mode 100644
index 0000000..1fd14e9
--- /dev/null
+++ b/openlane/README.md
@@ -0,0 +1,86 @@
+# Using OpenLANE to Harden Your Design:
+
+You can utilize the Makefile existing here in this directory to do that.
+
+But, first you need to specify 3 things:
+```bash
+export IMAGE_NAME=openlane:<the openlane tag/version you are using>
+export PDK_ROOT=<The location where the pdk is installed>
+export OPENLANE_ROOT=<the absolute path to the cloned openlane directory>
+```
+
+Then, you have two options:
+1. Create a macro for your design and harden it, then insert it into user_project_wrapper.
+
+2. Flatten your design with the user_project_wrapper and harden them as one.
+
+
+**NOTE:** The OpenLANE documentation should cover everything you might need to create your design. You can find that [here](https://github.com/efabless/openlane/blob/master/README.md).
+
+## Option 1:
+
+This could be done by creating a directory for your design here in this directory, and adding a configuration file for it under the same directory. You can follow the instructions given [here](https://github.com/efabless/openlane#adding-a-design) to generate an initial configuration file for your design, or you can start with the following:
+
+```tcl
+set script_dir [file dirname [file normalize [info script]]]
+
+set ::env(DESIGN_NAME) <Your Design Name>
+
+set ::env(VERILOG_FILES) "$script_dir/../../verilog/rtl/<Your RTL.v>"
+
+set ::env(CLOCK_PORT) <Clock port name if it exists>
+set ::env(CLOCK_PERIOD) <Desired clock period>
+```
+
+Then you can add them as you see fit to get the desired DRC/LVS clean outcome.
+
+After that, run the following command:
+```bash
+make <your design directory name>
+```
+
+Then, follow the instructions given in Option 2.
+
+## Option 2:
+
+1. Add your design to the RTL of the [user_project_wrapper](../verilog/rtl/user_project_wrapper.v).
+
+2. Modify the configuration file [here](./user_project_wrapper/config.tcl) to include any extra files you may need. Make sure to change these accordingly:
+```tcl
+set ::env(CLOCK_NET) "mprj.clk"
+
+
+set ::env(VERILOG_FILES) "\
+	$script_dir/../../verilog/rtl/defines.v \
+	$script_dir/../../verilog/rtl/user_project_wrapper.v"
+
+set ::env(VERILOG_FILES_BLACKBOX) "\
+	$script_dir/../../verilog/rtl/defines.v \
+	$script_dir/../../verilog/rtl/user_proj_example.v"
+
+set ::env(EXTRA_LEFS) "\
+	$script_dir/../../lef/user_proj_example.lef"
+
+set ::env(EXTRA_GDS_FILES) "\
+	$script_dir/../../gds/user_proj_example.gds"
+```
+**NOTE:** Don't change the size or the pin order!
+
+3. Remove this line `add_macro_placement mprj 1150 1700 N` from the interactive script [here](./user_project_wrapper/config.tcl) and replace it with the placement for your macro instances. Or, remove it entirely if you have no macros, along with this line `manual_macro_placement f`.
+
+4. Run your design through the flow: `make user_project_wrapper`
+
+5. Re-iterate until you have what you want.
+
+6. Go back to the main [README.md](../README.md) and continue the process of boarding the chip.
+
+
+## Extra Pointers:
+
+
+- The OpenLANE documentation should cover everything you might need to create your design. You can find that [here](https://github.com/efabless/openlane/blob/master/README.md).
+- The OpenLANE [FAQs](https://github.com/efabless/openlane/wiki) can guide through your troubles.
+- [Here](https://github.com/efabless/openlane/blob/master/configuration/README.md) you can find all the configurations and how to use them.
+- [Here](https://github.com/efabless/openlane/blob/master/doc/advanced_readme.md) you can learn how to write an interactive script.
+- [Here](https://github.com/efabless/openlane/blob/master/doc/OpenLANE_commands.md) you can find a full documentation for all OpenLANE commands.
+- [This documentation](https://github.com/efabless/openlane/blob/master/regression_results/README.md) describes how to use the exploration script to achieve an LVS/DRC clean design.