| // SPDX-FileCopyrightText: 2020 Efabless Corporation | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| // SPDX-License-Identifier: Apache-2.0 | |
| `default_nettype none | |
| `timescale 1 ns / 1 ps | |
| `define USE_OPENRAM | |
| `include "sram_1rw1r_32_8192_8_sky130.v" | |
| `include "mem_wb.v" | |
| module mem_wb_tb; | |
| reg wb_clk_i; | |
| reg wb_rst_i; | |
| reg [31:0] wb_adr_i; | |
| reg [31:0] wb_dat_i; | |
| reg [3:0] wb_sel_i; | |
| reg wb_we_i; | |
| reg wb_cyc_i; | |
| reg wb_stb_i; | |
| wire wb_ack_o; | |
| wire [31:0] wb_dat_o; | |
| initial begin | |
| wb_clk_i = 0; | |
| wb_rst_i = 0; | |
| wb_stb_i = 0; // master select-signal for the slave | |
| wb_we_i = 0; // R = 0 , W = 1 | |
| wb_cyc_i = 0; // master is transferring | |
| wb_adr_i = 0; // input addr 32-bits | |
| wb_dat_i = 0; // input data 32-bits | |
| wb_sel_i = 0; // where data is available on data_i 4-bits | |
| end | |
| always #1 wb_clk_i = ~wb_clk_i; | |
| initial begin | |
| $dumpfile("mem_wb_tb.vcd"); | |
| $dumpvars(0, mem_wb_tb); | |
| repeat (50) begin | |
| repeat (1000) @(posedge wb_clk_i); | |
| end | |
| $display("%c[1;31m",27); | |
| $display ("Monitor: Timeout, Test Wishbone Memory Failed"); | |
| $display("%c[0m",27); | |
| $finish; | |
| end | |
| integer i; | |
| reg [31:0] ref_data [255: 0]; | |
| reg [31: 0] read_data; | |
| initial begin | |
| // Reset Operation | |
| wb_rst_i = 1; | |
| #2; | |
| wb_rst_i = 0; | |
| #2; | |
| // Randomly Write to memory array | |
| for ( i = 0; i < 1; i = i + 1) begin | |
| ref_data[i] = $urandom_range(0, 2**30); | |
| write(i, ref_data[i]); | |
| #2; | |
| end | |
| #6; | |
| for ( i = 0; i < 1; i = i + 1) begin | |
| read(i); | |
| if (wb_dat_o !== ref_data[i]) begin | |
| $display("%c[1;31m",27); | |
| $display("Expected %0b, but Got %0b ", ref_data[i], wb_dat_o); | |
| $display("Monitor: Wishbone Memory Failed"); | |
| $display("%c[0m",27); | |
| $finish; | |
| end | |
| #2; | |
| end | |
| #6; | |
| $display("Success!"); | |
| $finish; | |
| end | |
| task write; | |
| input [32:0] addr; | |
| input [32:0] data; | |
| begin | |
| @(posedge wb_clk_i) begin | |
| wb_stb_i = 1; | |
| wb_cyc_i = 1; | |
| wb_sel_i = 4'hF; | |
| wb_we_i = 1; | |
| wb_adr_i = addr; | |
| wb_dat_i = data; | |
| $display("Write Cycle Started."); | |
| end | |
| // Wait for an ACK | |
| wait(wb_ack_o == 1); | |
| wait(wb_ack_o == 0); | |
| wb_cyc_i = 0; | |
| wb_stb_i = 0; | |
| $display("Write Cycle Ended."); | |
| end | |
| endtask | |
| task read; | |
| input [32:0] addr; | |
| begin | |
| @(posedge wb_clk_i) begin | |
| wb_stb_i = 1; | |
| wb_cyc_i = 1; | |
| wb_we_i = 0; | |
| wb_adr_i = addr; | |
| $display("Read Cycle Started."); | |
| end | |
| // Wait for an ACK | |
| wait(wb_ack_o == 1); | |
| wait(wb_ack_o == 0); | |
| wb_cyc_i = 0; | |
| wb_stb_i = 0; | |
| $display("Read Cycle Ended."); | |
| end | |
| endtask | |
| mem_wb uut( | |
| .wb_clk_i(wb_clk_i), | |
| .wb_rst_i(wb_rst_i), | |
| .wb_adr_i(wb_adr_i), | |
| .wb_dat_i(wb_dat_i), | |
| .wb_sel_i(wb_sel_i), | |
| .wb_we_i(wb_we_i), | |
| .wb_cyc_i(wb_cyc_i), | |
| .wb_stb_i(wb_stb_i), | |
| .wb_ack_o(wb_ack_o), | |
| .wb_dat_o(wb_dat_o) | |
| ); | |
| endmodule |