|author||diegohernando <email@example.com>||Mon Jan 11 15:36:38 2021 -0300|
|committer||GitHub <firstname.lastname@example.org>||Mon Jan 11 15:36:38 2021 -0300|
Update install_pdk.sh install_pdk should work fine
In order to edit and simulate the schematics and the layout the following tools need to be installed:
After cloning this repository and installing the previous mencioned tools, the PDK form SkyWater needs to be installed. In order to do that, run the install_pdk script in the repo. This script clones the following repositories:
This project is a test chip, which contains several two stages operationals amplifiers with Miller compensation. This is an all analog desing implemented on the Google-Skywater 130nm Open Source PDK. It is an Open Source project under[Apache License 2.0] (LICENSE).
A template SoC for Google SKY130 free shuttles. It is still WIP. The current SoC architecture is given below.
The managment SoC runs firmware that can be used to:
The memory map of the management SoC can be found here
This is the user space. It has limited silicon area (TBD, about 3.1mm x 3.8mm) as well as a fixed number of I/O pads (37) and power pads (10). See the Caravel premliminary datasheet for details. The repository contains a sample mega project that contains a binary 32-bit up counter.
The firmware running on the Management Area SoC, configures the I/O pads used by the counter and uses the logic probes to observe/control the counter. Three firmware examples are provided: