module divider(
`ifdef USE_POWER_PINS
    inout vdd,	// User area 1 1.8V supply
    inout vss,	// User area 1 digital ground
`endif


input clk, // input clock on FPGA
output reg cout1, // output clock after dividing the input clock by divisor
output reg cout2, // output clock after dividing the input clock by divisor
output reg cout3,
output reg cout4,
output reg cout5,
output reg cout6,
output reg cout7,
output reg cout8,
output reg cout9,
output reg cout10
    );
reg[27:0] counter=28'd0;
parameter DIVISOR = 28'd2;
reg[27:0] counter2=28'd0;
parameter DIVISOR2 = 28'd4;
reg[27:0] counter3=28'd0;
parameter DIVISOR3 = 28'd8;
reg[27:0] counter4=28'd0;
parameter DIVISOR4 = 28'd16;
reg[27:0] counter5=28'd0;
parameter DIVISOR5 = 28'd32;
reg[27:0] counter6=28'd0;
parameter DIVISOR6 = 28'd64;
reg[27:0] counter7=28'd0;
parameter DIVISOR7 = 28'd128;
reg[27:0] counter8=28'd0;
parameter DIVISOR8 = 28'd256;
reg[27:0] counter9=28'd0;
parameter DIVISOR9 = 28'd512;
reg[27:0] counter10=28'd0;
parameter DIVISOR10 = 28'd1024;
// The frequency of the output clk_out
//  = The frequency of the input clk_in divided by DIVISOR
// For example: Fclk_in = 50Mhz, if you want to get 1Hz signal to blink LEDs
// You will modify the DIVISOR parameter value to 28'd50.000.000
// Then the frequency of the output clk_out = 50Mhz/50.000.000 = 1Hz
always @(posedge clk)
begin
 counter <= counter + 28'd1;
 if(counter>=(DIVISOR-1))
  counter <= 28'd0;
 cout1 <= (counter<DIVISOR/2)?1'b1:1'b0;
end

always @(posedge clk)
begin
 counter2 <= counter2 + 28'd1;
 if(counter2>=(DIVISOR2-1))
  counter2 <= 28'd0;
 cout2 <= (counter2<DIVISOR2/2)?1'b1:1'b0;
end

always @(posedge clk)
begin
 counter3 <= counter3 + 28'd1;
 if(counter3>=(DIVISOR3-1))
  counter3 <= 28'd0;
 cout3 <= (counter3<DIVISOR3/2)?1'b1:1'b0;
end

always @(posedge clk)
begin
 counter4 <= counter4 + 28'd1;
 if(counter4>=(DIVISOR4-1))
  counter4 <= 28'd0;
 cout4 <= (counter4<DIVISOR4/2)?1'b1:1'b0;
end

always @(posedge clk)
begin
 counter5 <= counter5 + 28'd1;
 if(counter5>=(DIVISOR5-1))
  counter5 <= 28'd0;
 cout5 <= (counter5<DIVISOR5/2)?1'b1:1'b0;
end

always @(posedge clk)
begin
 counter6 <= counter6 + 28'd1;
 if(counter6>=(DIVISOR6-1))
  counter6 <= 28'd0;
 cout6 <= (counter6<DIVISOR6/2)?1'b1:1'b0;
end

always @(posedge clk)
begin
 counter7 <= counter7 + 28'd1;
 if(counter7>=(DIVISOR7-1))
  counter7 <= 28'd0;
 cout7 <= (counter7<DIVISOR7/2)?1'b1:1'b0;
end

always @(posedge clk)
begin
 counter8 <= counter8 + 28'd1;
 if(counter8>=(DIVISOR8-1))
  counter8 <= 28'd0;
 cout8 <= (counter8<DIVISOR8/2)?1'b1:1'b0;
end

always @(posedge clk)
begin
 counter9 <= counter9 + 28'd1;
 if(counter9>=(DIVISOR9-1))
  counter9 <= 28'd0;
 cout9 <= (counter9<DIVISOR9/2)?1'b1:1'b0;
end

always @(posedge clk)
begin
 counter10 <= counter10 + 28'd1;
 if(counter10>=(DIVISOR10-1))
  counter10 <= 28'd0;
 cout10 <= (counter10<DIVISOR10/2)?1'b1:1'b0;
end


endmodule