--- 
# TinyTapeout project information
project:
  wokwi_id:    0        # If using wokwi, set this to your project's ID
  source_files:        # If using an HDL, set wokwi_id as 0 and uncomment and list your source files here
    - verilog/rtl/regfile_top.v
    - verilog/rtl/xnor1.v
    - verilog/rtl/regfile16x4.v
  top_module:  "rolfmobile99_top"      # put the name of your top module here, make it unique by prepending your github username

# As everyone will have access to all designs, try to make it easy for someone new to your design to know what
# it does and how to operate it.
#
# Here is an example: https://github.com/mattvenn/tinytapeout_m_segments/blob/main/info.yaml
#
# This info will be automatically collected and used to make a datasheet for the chip.
documentation: 
  author:       "Rolf Widenfelt"      # Your name
  discord:      ""      # Your discord handle - make sure to include the # part as well
  title:        "16 x 4-bit dual port register file + XNOR"      # Project title
  description:  "A dual port register file + XNOR test gate"      # Short description of what your project does
  how_it_works: ""      # Longer description of how the project works
  how_to_test:  ""      # Instructions on how someone could test your project, include things like what buttons do what and how to set the clock if needed
  external_hw:  ""      # Describe any external hardware needed
  language:     "verilog" # other examples include Verilog, Amaranth, VHDL, etc
  doc_link:     ""      # URL to longer form documentation, eg the README.md in your repository
  clock_hz:     0       # Clock frequency in Hz (if required) we are expecting max clock frequency to be ~6khz. Provided on input 0.
  picture:      ""      # relative path to a picture in your repository
  inputs:               # a description of what the inputs do
    - clock
    - reset
    - xnor_a        # inputs for XNOR gate
    - xnor_b
    - en1           # inputs for regfile
    - en2
    - wrEn
    - rdAddr1_3
    - rdAddr1_2
    - rdAddr1_1
    - rdAddr1_0
    - rdAddr2_3
    - rdAddr2_2
    - rdAddr2_1
    - rdAddr2_0
    - dataIn_3
    - dataIn_2
    - dataIn_1
    - dataIn_0
  outputs:
    - xnor_y         # output for XNOR gate
    - dataBusA_3     # outputs for regfile
    - dataBusA_2
    - dataBusA_1
    - dataBusA_0
    - dataBusB_3
    - dataBusB_2
    - dataBusB_1
    - dataBusB_0