--- 
# TinyTapeout project information
project:
  wokwi_id:    348540666182107731  # If using wokwi, set this to your project's ID
#  source_files:        # If using an HDL, set wokwi_id as 0 and uncomment and list your source files here. Source files must be in ./src
#    - counter.v
#    - decoder.v
#  top_module:  "seven_segment_seconds"      # put the name of your top module here, make it unique by prepending your github username

# As everyone will have access to all designs, try to make it easy for someone new to your design to know what
# it does and how to operate it.
#
# Here is an example: https://github.com/mattvenn/tinytapeout_m_segments/blob/main/info.yaml
#
# This info will be automatically collected and used to make a datasheet for the chip.
documentation: 
  author:       "Alexander Shabarshin"      # Your name
  discord:      "Shaos#3571"      # Your discord handle - make sure to include the # part as well
  title:        "TestFlipFlops"      # Project title
  description:  "This is test design for testing flip-flops"      # Short description of what your project does
  how_it_works: "D-trig with and without Set/Reset, RS-trig and C-gate connected to IOs"      # Longer description of how the project works
  how_to_test:  "Input changes must be reflected on outputs"      # Instructions on how someone could test your project, include things like what buttons do what and how to set the clock if needed
  external_hw:  ""      # Describe any external hardware needed
  language:     "wokwi" # other examples include Verilog, Amaranth, VHDL, etc
  doc_link:     ""      # URL to longer form documentation, eg the README.md in your repository
  clock_hz:     0       # Clock frequency in Hz (if required) we are expecting max clock frequency to be ~6khz. Provided on input 0.
  picture:      "wokwi-sch-1.png"      # relative path to a picture in your repository
  inputs:               # a description of what the inputs do
    - clock
    - D # 1st data for many flops
    - C
    - S
    - R
    - NAND1
    - NAND2
    - Muller # 2nd data input for C-gate
  outputs:
    - segment a         # a description of what the outputs do
    - segment b
    - segment c
    - segment d
    - segment e
    - segment f
    - segment g
    - dot