Update info.yaml
diff --git a/info.yaml b/info.yaml
index a597d9e..03d34dc 100644
--- a/info.yaml
+++ b/info.yaml
@@ -1,7 +1,7 @@
---
# TinyTapeout project information
project:
- wokwi_id: 334445762078310996 # If using wokwi, set this to your project's ID
+ wokwi_id: 348540666182107731 # If using wokwi, set this to your project's ID
# source_files: # If using an HDL, set wokwi_id as 0 and uncomment and list your source files here. Source files must be in ./src
# - counter.v
# - decoder.v
@@ -14,26 +14,26 @@
#
# This info will be automatically collected and used to make a datasheet for the chip.
documentation:
- author: "" # Your name
- discord: "" # Your discord handle - make sure to include the # part as well
- title: "" # Project title
- description: "" # Short description of what your project does
- how_it_works: "" # Longer description of how the project works
- how_to_test: "" # Instructions on how someone could test your project, include things like what buttons do what and how to set the clock if needed
+ author: "Alexander Shabarshin" # Your name
+ discord: "Shaos#3571" # Your discord handle - make sure to include the # part as well
+ title: "TestFlipFlops" # Project title
+ description: "This is test design for testing flip-flops" # Short description of what your project does
+ how_it_works: "D-trig with and without Set/Reset, RS-trig and C-gate connected to IOs" # Longer description of how the project works
+ how_to_test: "Input changes must be reflected on outputs" # Instructions on how someone could test your project, include things like what buttons do what and how to set the clock if needed
external_hw: "" # Describe any external hardware needed
language: "wokwi" # other examples include Verilog, Amaranth, VHDL, etc
doc_link: "" # URL to longer form documentation, eg the README.md in your repository
clock_hz: 0 # Clock frequency in Hz (if required) we are expecting max clock frequency to be ~6khz. Provided on input 0.
- picture: "" # relative path to a picture in your repository
+ picture: "wokwi-sch-1.png" # relative path to a picture in your repository
inputs: # a description of what the inputs do
- clock
- - reset
- - none
- - none
- - none
- - none
- - none
- - none
+ - D # 1st data for many flops
+ - C
+ - S
+ - R
+ - NAND1
+ - NAND2
+ - Muller # 2nd data input for C-gate
outputs:
- segment a # a description of what the outputs do
- segment b
@@ -42,5 +42,4 @@
- segment e
- segment f
- segment g
- - none
-
+ - dot
